How to make Christmas Cards and Gift Tags Scented Glitter Glue
Materials List... The materials for this lesson can be found at a Gold or above art centre. Go to to find the one nearest to you. MSB0037 Mont Marte Construction Paper Pad A4 MSB0069 Mont Marte Fluro Art Card A4 MSB0009 Mont Marte Sketch Book A4 MPST0001 Mont Marte Kids Poster Paint White 500ml MPST0009 Mont Marte kids Poster Paint Brown 500ml MACR0016 Mont Marte Clear Liquid Glue 50g MAPL0002 Mont Marte Easy Clean Wood Palette MCG0104 Mont Marte Taklon Flat Brush #6 MMCK0122 Mont Marte Felt Tip Markers Also Required: Water Ribbons String Scissors Potato Natural card stock
1 1. Christmas Tree Card 1) Take out an Orange sheet of Fluro Art Card and fold it in half. 2) Cut a sheet of cartridge paper so that it sits 5mm inside the perimeter of the Orange card. Glue this into position. 3) Cut a triangle shape using Green construction paper. Glue this into position. 4) To create the trunk. Cut a small rectangle out of natural coloured paper* and glue it under the flat part of the green triangle. 5) Using the Scented Glitter Glue apply dabs over the tree. 2 2. Snowman Card 1) Take a sheet of natural card stock* and fold it in half. 2) Squeeze out some White Poster Paint on to a flat palette. Take a potato and cut it in half with a butter knife. Dip the flat part of the potato into the paint and make a print with the potato stamp onto the card. Let the paint dry. 3) Cut a carrot shape from Orange art card, and glue it into the appropriate position. 4) Create dots for the eyes and mouth with a Black felt tip pen. Draw on two stick arms as well. 5) Draw a heart shape around the belly area with a Red Felt Tip Marker. 6) Fill in the heart with Red Scented Glitter Glue. *Natural card stock has a natural light brown colouring. When paper and card is glued together, it is a good idea to weight it with a book. Poster Paint is quite slow drying but can be speed dried with a hair dryer. Scissors are used in a few of the steps and if you are a child it is important to get adult supervision. The great thing about potato stamps is that the cards can be mass produced so you can make lots of cards quite quickly. Copyright of Mont Marte International Pty Ltd ACN 1015898
3 3. Reindeer Card 1) Take out a sheet of Green Fluro Art Card and fold it in half. 2) Cut a sheet of Red Construction Paper so that it sits 5mm inside the perimeter of the Green card. Glue the Red sheet centrally inside the Green card. 3) Cut a sheet of White cartridge paper so that it fits 5 mm inside the Red sheet and glue it into position. 4) Squeeze out some Brown poster paint on to a flat palette. Dip your finger into the paint and transfer the fingerprints onto the white cartridge paper. Let this paint dry. 5) Using a Black Felt Tip Marker, draw on the antlers, nose and ears. Remember if you plan on 1 of the reindeers being Rudolph, then don t put a Black nose on 1 of them. 4 6) Apply a dab of Red Scented Glitter Glue for Rudolphs nose. 4. Rudolph Gift Tag 1) Squeeze a small amount of Brown Poster paint onto a flat palette. Dip your finger into it and transfer the fingerprint onto a sheet of cartridge paper. Let this dry. 2) With a Black Felt Tip Marker draw on the antlers, ears and 2 eyes. 3) Apply some Red Scented Glitter Glue onto the bottom of the print for the nose. 4) Draw out a rectangle shape outline around Rudolph s head with a pencil. 5) Cut to the outline shape with some scissors. Use a hole punch to create a hole centrally at the top of the tag. 5 In the Reindeer card We have created a print for each one of Santas reindeer. Their names are Comet, Cupid, Rudolph, Donner, Blitzen, Vixen, Prancer, Dancer, Dasher. You could also create a print for everybody in your family.
5 Step 5. Santa Gift Tag 1) Using a sheet of Red Construction Paper, cut out a tag shape with scissors. 2) Punch a hole centrally in the top of the tag. 3) With White Poster Paint, create a line down the middle of the tag about 1cm thick. Use a Flat Brush to do this. Let the paint dry. 4) Draw in santa s belt with a Black Felt Tip Marker. 5) Using Gold Scented Glitter Glue paint in the belt buckle. 6 Step 6. Gingerbread Man Gift Tag 1) Draw the shape of the ginger bread man onto some natural card and cut around the outline. If you need some guidance you can refer to the last image in this PDF. 2) Using a hole punch create a hole into the shape at the top of the head. 3) Apply some Silver Scented Glitter Glue around the perimeter of the cutout. Ensure it is about 3mm inside the edge. 4) Apply a dab of Red Scented Glitter Glue for each rosy cheek and 3 buttons on his front.
Gingerbread Man Template Gift Tag Template