INTERIOR WORKS NANDIMANDALAM BRANCH S.NO Description Quantity Rate Amount 1 Full height partition with laminate finish and glass. Providing & fixing partly glazed partly paneled Dry Wall Partition with metal studs & comprising of the following: i) Frames : a) Supporting system comprising of India Gypsum / Boral, factory made Metal studs of 51 mm x 35mm x 0.50mm placed horizontally and vertically at 600mm c/c.metal tracks of 51mm x 36mm x 0.50mm in size shall Be fixed at floor, middle, door and ceiling levels with staggered joints to avoid through joints. All vertical members should touch the ceiling with horizontal ceiling channel at beam / slab. b)rate to include necessary strengthening with additional studs / tracks or channels at doors or other openings wherever required and as directed. ii) Panels : a) 9mm BWR Plywood finished with 1mm laminate in approved colour on Both sides as shown in the drawing. b) 8mm thick clear float glass with etching design fixed as in the drawing between 900mm to 2100mm level in specified areas with 100mm x 15mm beach wood jamb and 12mm x 12mm beach wood beading. iii) Finish with melamine polish :
2. All exposed surfaces of beach wood or teak wood sections should be finished melamine spray polish after properly preparing surface and as directed. Partitions shall be firmly fixed to the ground, walls, roof / ceiling by means of screws and concealed brackets. Partitions shall be erected in perfect line and level both horizontally and vertically. Doors in partitions with glass: Providing & fixing partly glazed / partly paneled doors with beach wood / teak wood frames and comprising of the following : a) Door frames : The outer door frame work shall be with well seasoned beech / teak wood Sections 100mm x 25mm in finished Size placed vertically and horizontally As shown in the drawing. b) Door shutter : The door shutter shall be 32mm solid Core flush door bonded with phenol formal-de-hide finished on both sides with 1mm laminate in approved colour on both sides also providing a glazed panel as shown in the drawing with 8mm thick plain float glass with etching as per approved design fixed 50mm x 25mm beech / teak wood jamb and 12mm x 12mm beach / teak wood beading. c) Door hard ware : Each door shutter shall be provided and fixed with hinges, tower bolts, door stoppers, mortice lock, handles ( brass lacquer finished international quality), door silencer all as per approved samples by bank. 50 Sqm
3 d) Finish with melamine polish : All exposed surfaces of beach wood or teak wood sections shall be finished with melamine spray polish after property preparing surface and as directed. Low height partitions Factory made : Providing & fixing free standings factory made Low Height Partitions with metal frames & comprising of the following. i) Frames : a) Supporting system comprising of custom made aluminum extruded section minimum 65mm wide and 2mm thick profiles powdered coated in approved colour. The bottom member shall be 100mm skirting section with height adjustments levelers and self locking arrangement. The frames structures shall have nuts and bolts with blind revert constructions. ii) Wire Management System : The partition shall have concealed, easily accessible wire management ducts for running electrical, networking and communication cables / wires at different levels without having any interference with provision of easily removable and easily refixable panels on either sides. iii) Top and Side Edges : The top and other exposed edges of the partition shall be covered either with powered coated aluminum extruded section with half round die 7 Sqm
4 cast corner & center caps to avoid sharp edges or aluminum trims fitted with injection moulded ABS caps. iv) Panels : a) 12mm MDF / pre-laminated particle boards or 9mm plain particle / MDF boards finished with 1mm laminate in approved colour on both sides fixed with spring clip mechanism. b) 5mm thick clear float glass with etching design fixed as per approved design self locking snap fitting system with spring clip mechanism. c) Pin up boards with 12mm jolly soft boards finished with upholstery cloth (Rs.95/- per mts.) on both sides without any loose or wrinkles fixed with spring clip mechanism placed as directed. False ceiling (Gyp-board) : Providing and fixing False ceiling with Gyp-Board tiles and metal frames as under: a) The basic frames shall be formed with G.I. sheet section as main C Trunking measuring 50 x 19 x 12mm formed out of 24 Gauge G.I. metal sheets placed at 1200mm c/c with cross & sub-channels furring measuring 50 x 19 x 19mm formed out of 26 gauge GI metal sheets. The cross and sub channels shall be fixed to the main trunking by means of sheet metal screws at 1200mm / 60mm centers in both directions to form a grid of 1200 x 600mm b) The main trunking shall be suspended by means of adjustable hangers of 6mm dia rods, L Clamps, holding clamps etc fixed with metal 5 Sqm
5 fasteners in the roof, double check nuts for level adjustments. The wall runner shall be out of 24 gauge G I sheet 25 x 25mm in size and shall be fixed to the wall with screws. c) Providing & fixing 12.50mm thick Gyp Board / tiles to the frames with sheet metal screws and finishing the entire surface neat, smooth and in perfect line and level as directed. d) Applying two coats of plastic emulsion in approved colour to the ceiling. Rate to include provision for cutting opening, providing additional frames to accommodate lighting fixtures, a.c. grills providing steps, vertical off sets etc.all complete as directed. 150 Sqm Low Height Storage Units: Providing & Fixing low height (around 900mm) factory made storage racks or up to window sill level or as directed, 450mm deep and comprising of the following: a) The basic structure including top, bottom, sides shelves and shutters shall be made out of 18mm BWP/BWR block board except for top which shall be 25mm thick particle board /MDF with post formed round edges. The exposed of the block board shall be machine covered PVC TAPE edge beading. b) The exposed portions of storage rack including sides and the shutters shall be finished with 1.0mm laminate in approved colour duly fixed with fevicol. c) The baking shall be with 18mm
6. BWR ply / MDF laminated finish on both sides. A middle shelf with 18mm BWR ply / MDF shall be fixed at desired height as directed by bank / consultant. d) The shutters shall be fixed with concealed cabinet auto closing hinges, a multipurpose cup board lock, tower bolt, ball catcher, handles etc all as approved. f) All internal un exposed portions of the storage rack shall also be finished with laminated finish in approved colour. g) Skirting and base frames shall be fixed at the bottom of the storage racks. The skirting shall be finished with 1.0mm laminate in approved colour. Counters cum workstation for Single Window Operations. Providing & Fixing factory made counters cum work stations for single window operations for two operators and one passing officer 1500mm long x 1050mm wide x 750mm high with basic structure of 18mm BWR plywood and laminated finish 25mm thick post formed table tops as per details shape, size and design shown in the drawing and comprising of the following : a) Low height partition 1500mm high and in various lengths all same as detailed under item no 5 with necessary beech / teak wood jamb, capping etc. all complete as per drawing. 10 Sqm Side partions- 4nos. Back partion 2 nos
Rear side doors 2 nos with Locking arrangement. b) Working tables 1500mm x 1050mm made with 25mm BWR plywood with post formed top and 18mm BWR plywood for sides finished with 1.0mm laminate in approved colour, - 2 nos Side tables 400mm x 1200mm with 25mm BWR plywood with post formed top and 18mm BWR plywood for sides finished with 1.0mm laminate in approved colour 2 nos. The table and side tables shall have following accessories: 3 nos of drawer units with 3 drawers each including all hardware items like telescopic drawer metal channel, handles, auto closing, drawer lock etc all complete. 3 nos of CPU stand made out of 18 BWR plywood and 1.0mm laminate. 3 nos cupboard units with shutter made out of BWR plywood and finished with 1mm laminate and necessary hardware like cabinets hinges, locks, handles etc all complete. 7 3 nos of dural make powder coated in approved colour for glass openings. 3 nos of moulded ready made key board tray with metal channel etc. 1 Unit c) All the internal, external and exposed surfaces of the counters
tables including top, side partition, drawer shutters etc.shall be finished with 1.0mm laminate of approved colour, make and design etc. d) All exposed surfaces of beech wood moldings sections shall be finished with melamine spray polish after properly preparing surface and as directed all other concealed surfaces like inside of the drawers, cabinet and shutters etc. shall be finished with two coats of enamel paint in approved colour over a coat of printer. (1 unit = 2 operator seats,case manager ) Table for Branch Manager with side rack / table i) Providing and laying table including side rack for Branch Manager of size 1800 x 850 x 750mm as detailed under a) Basic structure with 25mm BWR plywood / MDF Boards for top post formed and finished with laminate with approved colour and shape 18mm BWR plywood for all sides, verticals, modesty panels, side rack and shutters. b) Two drawer box with a shallow drawer, one drawer one cup board with shelf and shutter in side rack. The drawers shall be fixed with telescopic metal channels and the shutters with cabinet hinges, locks, handles etc. c) The table top post formed, modesty panel and all other exposed surfaces to be finished with 1mm thick laminate of approved colour, matching grains and design. All edges of the plywood/ block board shall be covered with beech /teak
8. wood decorative beading as approved by bank. d) Table shall be fixed with a foot rest made out of Sal wood 100mm x 50mm section and polished. Sliding tray factory made Key board with metal telescopic sliding channels. e) One side table / rack 1200 x 450x 750mm with shutters made out of 18mm BWR plywood for 18mm BWR plywood for sides, shutters etc. finished with 1mm laminate in approved colour. 25mm BWR plywood/ MDF boards for top post formed and finished with laminate in approved colour and shape. f) All the internal and external and exposed surfaces of the counter including top, side partitions, drawers, shutters etc. shall be finished with 1mm laminate in approved make and design and colour etc. g) The edge of the table shall be finished with 35mm x35mm beading of beech wood sections and lipping for all ply/ block board shall be with 18mm x6mm beech wood beading and shall be finished with melamine spray polish after properly preparing surface and as directed by Bank. h) All other concealed surfaces like inside of the drawers & cabinet and shutters etc. shall be finished with two coats of enamel paint in approved colour over a coat of primer. 1 No 2 Nos ii) Officer table with side rack 5 length and other specification done by BM table.
Glazed entrance door: Providing and fixing fully glazed panels /partitions and doors with powder coated aluminium frames, glass and comprising of the following: Fixed panels: a)aluminium extruded rectangular tube sections (Jindal Cat # 4616) of size 101.60 x 44.5 x 3.18 mm placed vertically and horizontally to provide wider and bigger glass. b)the skirting section shall be aluminium extruded rectangular tube section measuring 114.00 x 44.25 x 3.18mm. c)heavy duty snap on clips/glazing clips for fixing glass panels along with rubber gaskets. d)the panels shall be with 8mm thick plain clear float glass with etching as per approved design fixed with heavy duty snap on clips/ glazing clips and rubber beading. Doors: 3 Sqm 4.50Sqm a) Door verticals with aluminium extruded rectangular tube sections ( Jindal Cat # 4524) measuring 83.5 x 44.5 x3.50mm. Fixed glazing in front with door: b) The top and bottom members shall be aluminum extruded rectangular tube section ( Jindal Cat # 4529) measuring 114.00 x 44.50x 3.18mm. c)the panels shall be with 8mm thick plain float glass
etched in pattern and design as approved and fixed with heavy duty snap on clips/ glazing clips and rubber gasket. d) Heavy duty aluminium tower bolt, brass bead lock, door stoppers, aluminum handles as per approved size, shape and design fixed to each shutter as directed. e) Providing and fixing floor spring hinged to each shutter of approved make. f) Partition and door frames including all aluminium sections, screws, aluminium hardware etc. all shall be powder coated in approved colour. Partition Doors with floor spring hinges Note:- Rates quoted are inclusive of taxes