Power Management Applications Solutions

Similar documents
Simplify your power management design with TI power solutions

Transformer and Inductor Design for Optimum Circuit Performance

Introduction to Isolated Topologies

Power Systems Design Tools

AN2333 Application note

AN1489 Application note

CONTENTS. Chapter 1. Introduction to Power Conversion 1. Basso_FM.qxd 11/20/07 8:39 PM Page v. Foreword xiii Preface xv Nomenclature

STEVAL-ISA005V1. 1.8W buck topology power supply evaluation board with VIPer12AS. Features. Description. ST Components

UM0920 User manual. 4 W non-isolated, wide input-voltage range SMPS demonstration board based on the VIPer16. Introduction

Application Note, V1.1, Apr CoolMOS TM. AN-CoolMOS-08 SMPS Topologies Overview. Power Management & Supply. Never stop thinking.

AN1756 Application note

AN1513 Application note

UM1746 User manual. 500 W fully digital AC-DC power supply based on the STM32F334 microcontroller. Introduction

Comparing the UC3842, UCC3802, and UCC3809 Primary Side PWM Controllers. Table 1. Feature comparison of the three controllers.

UCC38C42 25-Watt Self-Resonant Reset Forward Converter Reference Design

PULSE CONTROLLED INVERTER

AN2837 Application note

EVL6566B-40WSTB demonstration board 40 W wide input range flyback converter for digital consumer equipments using the L6566B

STSR30 SYNCHRONOUS RECTIFIER SMART DRIVER FOR FLYBACK

AN1258 Application note

Fundamentals of Power Electronics

AN1007 APPLICATION NOTE L BASED SWITCHER REPLACES MAG AMPS IN SILVER BOXES

Obsolete Product(s) - Obsolete Product(s)

The First Step to Success Selecting the Optimal Topology Brian King

AN2961 Application note

AN1514 Application note

AN1642 Application note

AN3302 Application note

Generating Isolated Supplies for Industrial Applications Using the SiC462 in an Isolated Buck Topology

AN2243 Application note

AN2239 APPLICATION NOTE

Measuring Wireless Power Charging Systems for Portable Electronics

ST619LBDR. DC-DC converter regulated 5 V charge pump. Features. Description

Wide range isolated flyback demonstration board, single output 12 V/4.2 W based on the VIPER16LN. Description

GaN in Practical Applications

A Novel Single-Stage Push Pull Electronic Ballast With High Input Power Factor

SRM TM A Synchronous Rectifier Module. Figure 1 Figure 2


Texas Instruments. System Power Design for Wall-Powered Application. Dec, 18 th -22 th, 2006 Kevin Lin HPA Asia Market Development

Design of a high-frequency series capacitor buck converter

Simplifying DC-DC Converter Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope APPLICATION NOTE

AN2447 Application note

Constructing Your Power Supply Layout Considerations

Welcome. High Efficiency SMPS with Digital Loop Control

In-circuit Measurements of Inductors and Transformers in Switch Mode Power Supplies APPLICATION NOTE

AN APPLICATION NOTE

ST5R00 SERIES MICROPOWER VFM STEP-UP DC/DC CONVERTER

AN1229 Application note

February 2000 Mixed-Signal Products SLVU024

Measuring Vgs on Wide Bandgap Semiconductors APPLICATION NOTE

LD39150xx Ultra low drop BiCMOS voltage regulator Features Description Typical application

ST755 ADJUSTABLE INVERTING NEGATIVE OUTPUT CURRENT MODE PWM REGULATORS

AN2000 Application note

ST662AB ST662AC. DC-DC converter from 5 V to 12 V, 0.03 A for Flash memory programming supply. Features. Description

STEVAL-ISA111V1. Wide-range single-output demonstration board based on the VIPER26HN. Features. Description STEVAL-ISA111V1

Chapter 10 Switching DC Power Supplies

LD A ultra low-dropout voltage regulator. Applications. Description. Features

Positive to Negative Buck-Boost Converter Using LM267X SIMPLE SWITCHER Regulators

LeMeniz Infotech. 36, 100 Feet Road, Natesan Nagar, Near Indira Gandhi Statue, Pondicherry Call: , ,

L4963W L4963D 1.5A SWITCHING REGULATOR

Phase Shift Resonant Controller

A Highly Versatile Laboratory Setup for Teaching Basics of Power Electronics in Industry Related Form

POWER ISIPO 29 ISIPO 27

Analog Technologies. ATI2202 Step-Down DC/DC Converter ATI2202. Fixed Frequency: 340 khz

Obsolete Product(s) - Obsolete Product(s)

Description. Part numbers Order codes Packages Output voltages

STEVAL-ISA110V1. 12 V/12 W wide-range non-isolated flyback based on the VIPER26LN. Features. Description

L4949E. Multifunction very low drop voltage regulator. Features. Description

EVAL-RHF310V1. EVAL-RHF310V1 evaluation board. Features. Description

AN2833 Application note

Sophisticated Power Loss Analysis Using A Digital Phosphor Oscilloscope

AN1441 Application note

Regulator 2.dwg: a simplified linear voltage regulator. This is a multi-sheet template:

AN2359 Application note

OPERATIONAL AMPLIFIERS

Using the EVM: PFC Design Tips and Techniques

AN APPLICATION NOTE

SG2524 SG3524 REGULATING PULSE WIDTH MODULATORS

USING THE L6204, A BIPOLAR STEPPER AND DC MOTOR DRIVER IN BCD TECHNOLOGY

STEVAL-ISA112V1. Wide range non-isolated flyback demonstration board, single-output 12 V/4 W based on the VIPER06HN. Features.

How to Design Multi-kW Converters for Electric Vehicles

AN3360 Application note

Conventional Single-Switch Forward Converter Design

R. W. Erickson. Department of Electrical, Computer, and Energy Engineering University of Colorado, Boulder

AN2625 Application note High AC input voltage limiting circuit Introduction

Effect of Programmable UVLO on Maximum Duty Cycle Achievable With the TPS4005x and TPS4006x Family of Synchronous Buck Controllers

Is Now Part of To learn more about ON Semiconductor, please visit our website at

Lecture 4 ECEN 4517/5517

Digital Control IC for Interleaved PFCs

Chop away input offsets with TSZ121/TSZ122/TSZ124. Main components Single very high accuracy (5 μv) zero drift micropower 5 V operational amplifier

TN1156 Technical note

STC03DE170HP. Hybrid emitter switched bipolar transistor ESBT 1700V - 3A W. Features. Applications. Description.

ST8R00. Micropower 1 A synchronous step-up DC-DC converter. Features. Description

TSM1011. Constant Voltage and Constant Current Controller for Battery Chargers and Adapters. PIN CONNECTIONS (top view) DESCRIPTION APPLICATIONS

TDA7384A. 4 x 46 W quad bridge car radio amplifier. Features. Description

AND9043/D. An Off-Line, Power Factor Corrected, Buck-Boost Converter for Low Power LED Applications APPLICATION NOTE.

Description. Table 1. Device summary. Order codes Package Packaging

CHAPTER IV DESIGN AND ANALYSIS OF VARIOUS PWM TECHNIQUES FOR BUCK BOOST CONVERTER

Doing More with Buck Regulator ICs

STCS05A. 0.5 A max constant current LED driver. Features. Applications. Description

Transcription:

R E A L W O R L D S I G N A L P R O C E S S I N G TM Power Management Applications Solutions Literature Reference Guide Key Power Management Documents ISSUE 1, 2004 Inside PWM Controller Techniques 2 Topology Overview 2-3 Applications 3-5 Technical Support 6

42 Power Supply Control Documents PWM Control Techniques Current Mode Control Switching Power Supply Topology: Voltage vs. Current Mode SLUA119 Modeling, Analysis and Compensation of the Current Mode Converter SLUA101 A New Integrated Circuit for Current Mode Control SLUA075 A More Accurate Current Mode Control Model SEM1300 Topic A2* Average Current Mode Control Average Current Mode Control of Switching Power Supplies SLUA079 The UC3848 Average Current Mode Controller Squeezes Maximum Performance from Single Switch Converters SLUA126 Voltage Mode Control Switching Power Supply Topology Voltage Mode vs. Current Mode SLUA119 Control Loop Cookbook SEM1100 Topic 5* Simple Circuit Modifications Enhance Optocoupler Performance SLUA135 Control Loop Design Designing Stable Control Loops SEM1400 Topic 5 Control Loop Cookbook SEM1100 Topic 5* An Analytical Comparison of Alternative Control Techniques for Powering Next Generation Microprocessors SEM1400 Topic 1* Op Amps for Everyone Design Guide SLOD006B Topology Overview Buck (Step-Down) and Synchronous Buck Regulators Understanding Buck Power Stages in Switchmode Power Supplies SLVA057 Predictive Gate Drive Technology Boosts Converter Efficiency SLUA281 TPS40000/1 Controllers Enable High Power Synchronous Step-Down Converter SLUU120A Under the Hood of Low Voltage DC/DC Converters SEM1500 Topic 5* TPS40002/3 Controllers Enable Miniature Synchronous Step Down Converter SLUU123A Designing for Small-Size, High-Frequency Applications with the TPS54xxx Family of SWIFT Converters SLVA107 Fast Response Synchronous Buck Converter Design Using the TI TPS56xx Family SLVU007 Boost (Step-Up) Regulator Understanding Boost Power Stages in Switchmode Power Supplies SLVA061 High Voltage Power Supply Using a Highly Integrated DC/DC Converter SLVA137 3.3-V to 12-V High Efficiency Boost Converter SLUA267 Dual Output Boost Converter SLUA288 Buck-Boost Understanding Buck-Boost Power Stages in Switchmode Power Supplies SLUA059A TPS6755 Evaluation Using the TPS673xxEVM SLVA010 SEPIC Versatile Low Power SEPIC Converter Accepts Wide Input Voltage Range SLUA158 High Power Factor Preregulator Using the SEPIC Converter SEM900 Topic 6* Flyback Design of Flyback Transformers and Inductors SEM400 Topic 1* Discontinuous Current Flyback Converter Design SEM300 Appendix C* 10-W Flyback Converter Utilizing the UCC3809 SLUU087B Elegant Simple Off-Line Bias Supply for Very Low Power Applications SLUA116 Design Review: 50-W Flyback Converter Using the UCC3809 and UCC3965 SLUA086 Design Review: 150-W Current Mode Flyback SEM400 Topic 6* UCC38C44 12-V Isolated Bias Supply SLUA274 Forward 25-W Forward Converter Design Review SLUA276 Multiple Output High Density Converter Design SEM1200 UCC38C42 Controlled 25-W Forward Converter SLUA276 Texas Instruments Issue 1, 2004

3 Topology Overview (continued) Forward (continued) UCC3800/1/2/3/4/5 BiCMOS Current Mode Control ICs SLUA149 Applying the UCC3570 Voltage Mode PWM Controller to Both Off-Line and DC/DC Converter Designs SLUA077 50-W Forward Converter with Synchronous Rectification and Secondary Side Control SEM1300 Topic 4* The Use of Synchronous Rectifiers to the Design of Single Ended Forward Converters SEM1400 Topic 7* Two Switch Forward 250-W Off-Line Forward Converter Design Review SEM100 Topic 4* Active Clamp/ Reset Forward and Flyback Active Clamp and Reset Technique Enhances Forward Converter Performance SEM1000 Topic 3* Design Considerations for Active Clamp and Reset Technique SEM1100 Topic 3* Half-Bridge Zero Voltage Switching Resonant Power Conversion SLUA159 The UC3823A, B and UC3825A, B Enhanced Generation of PWM Controllers SLUA125 Push Pull and Current Fed Push-Pull 1.5 MHz Current Mode IC Controlled 50-W Power Supply SLUA053 The UC3823A, B and UC3825A, B Enhanced Generation of PWM Controllers SLUA125 140-W Multiple Output Very High Density DC/DC Converter Design Review SEM1200 Topic 6* Full Bridge and Phase Shifted Zero Voltage Transition Converter (ZVT) Designing a Phase Shifted Zero Voltage Transition Power Converter SEM900 Topic 3* Design Review: 500-W, 40 W/in3 Phase Shifted ZVT Power Converter SEM900 Topic 4* Phase Shifted Zero Voltage Transition Design Considerations and the UC3875 PWM Controller SLUA107 100-W, 400 khz High Efficiency DC/DC Converter Design Review SEM1100 Topic 2* Configuring the UCC3895 for Direct Control Driven Synchronous Rectifiers SLUU109A Applications Battery and Battery Chargers Simple Switchmode Lead-Acid Battery Charger SLUA055 Improved Charging Methods for Lead-Acid Batteries Using the UC3906 SLUA115 U-166 An Off-Line Lead Acid Charger Based on the UC3909 SLUA058 High Efficiency Dual Chemistry Charger Using the bq2000 SLUA013 Implementing a Practical Off-Line Lithium-Ion Charger Using the UCC3809 SLUA097 Coupled Inductors Coupled Inductor Design SEM900 Topic 8* Coupled Filter Inductors in Multiple Output Buck Regulators SEM500 Topic 5* Current Doubler Rectification The Current Doubler Rectifier: An Alternative Rectification Technique for Push-Pull and Bridge Converters SLUA121 100-W, 400 khz High Efficiency DC/DC Converter Design Review SEM1100 Topic 2* Synchronous Rectifiers of a Current Doubler SLUA287 Current Sensing Current Sensing Solutions for Power Supply Designers SEM1200 Topic 1* Extend Current Transformer Range SLUA174 Using Copper PCB Etch for Low Value Resistance SLUA236 Conditioning a Switch-Mode Power Supply Current Signal Using TI Op Amps SLOA044 Distributed Power Distributed Power Systems SEM900 Topic 1* Duty Cycle Clamp Accurate PWM Duty Cycle Clamp Circuit SLUA253 Programming the UCC3809 for 90% Maximum Duty Cycle Clamp SLUA251 The Effects of Oscillator Discharge Variations on Maximum Duty SLUA173

4 Applications (continued) Electro-Magnetic Interference (EMI) EMI Considerations for DC to DC Converters and Integrated Switching Regulators SLTA015 Understanding and Optimizing Electromagnetic Compatibility in Switchmode Power Supplies SEM1500 Topic 1* PCB Design Guidelines for Reduced EMI SZZA009 Frequency Foldback The UCC3884 Frequency Foldback Pulse Width Modulator SLUA114 Frequency Foldback Technique Provides Protection SLUA165 Gate Drive Practical Considerations in High Performance MOSFET, IGBT and MCT Gate Drive Circuits SLUA105 A Design and Application Guide for High Speed Power MOSFET Gate Drive Circuits SEM1400 Topic 2* Hot Swap A Universal Telecommunications Hot Swap Device Family SLUA283 Lighting Powering a 35-W DC Metal Halide High-Intensity Discharge (HID) Lamp SLUA078 UCC3972 BiCMOS Cold Cathode Fluorescent Lamp Driver Controller, EVM SLUA160 Linear Regulators A High Performance Linear Regulator for Low Dropout Applications SLUA072 Loadshare / Current Share Paralleling Power Choosing and Applying the Best Technique for Loadsharing SEM1500 Topic 6* UC3907 Load Share IC Simplifies Parallel Power Supply Design SLUA147 48-V IN, 12-V OUT Loadshare System Using the UCC39002 with Three DC/DC Modules SLUA270A Low Drop Out (LDO) Regulators Understanding the Terms and Definitions of LDO Voltage Regulators SLVA079 Technical Review of Low Dropout Voltage Regulator Operation And Performance SLVA072 Extending the Input Voltage Range of an LDO Regulator SLVA119 ESR, Stability, and the LDO Regulator SLVA115 Magnetic Amplifiers (Mag Amps) Magnetic Amplifier Control for Simple Low Cost Secondary Regulation SEM500 Topic 7* Magnetics Design Magnetics Design Handbook Magnetics Definitions and Equations Transformer and Inductor Design for Optimum Circuit Performance Minimizing Winding Losses in Magnetic Devices The Effects of Leakage Inductance on Multiple Output Flyback Circuits Eddy Current Losses in Transformer Windings and Circuit Wiring Multiple Outputs A Power Management Solution for Efficient, Multiple Output Applications SLUA255 Achieving High Efficiency with a Multiple Output CCM Flyback Supply SEM1500 Topic 3* Unique Cascaded Power Converter Topology for High Current Low Output Voltage Applications SEM1300 Topic 1* 140-W Multiple Output Very High Density DC/DC Converter Design Review SEM1200 Topic 6* The Effects of Leakage Inductance on Multiple Output Flyback Circuits SEM500 Topic 2* Coupled Filter Inductors in Multiple Output Buck Regulators SEM500 Topic 5* Optocoupler and Isolation Applications Simple Circuit Modifications Enhance Optocoupler Performance SLUA135 Optocoupler Feedback Drive Techniques SLUA167 Isolating the Control Loop SEM700 Topic 2* A Simple Isolation Amplifier Using the UC1901 SLUA161 Power Factor Correction (PFC) Optimizing the Design of a High Power Factor Switching Preregulator SEM700 Topic 7* UC3854 Controlled Power Factor Correction Circuit Design SLUA144 Designing High Power Factor Off-Line Power Supplies SEM1500 Topic 2* Optimizing Performance in UC3854 Power Factor Correction Applications SLUA172 Power Supply Control Applications Solutions

Power Supply Control Documents 5 Applications (continued) Power Factor Correction (PFC) (continued) UC3854A/B and UC3855A/B Provide Power Limiting with Sinusoidal Input Current for PFC Front Ends SLUA196A Power Factor Correction Using the UC3852 Controlled On-Time Zero Current Switching Technique SLUA108 250-W PFC Boost Follower PreRegulator Design SLUA269 Predictive Gate Drive Technology Predictive Gate Drive Boosts Converter Efficiency SLUA281 Predictive Gate Drive Technology Frequently Asked Questions SLUA285 Printed Circuit Board Layout Practical Considerations in Troubleshooting and Optimizing Power Supply Control Circuits SEM1200 Topic 4* Layout Guidelines for TPA300x Series Parts SLOA103 High Speed Amplifier PCB Layout Tips SLOA102 PCB Design Guidelines for Reduced EMI SZZA009 Optimizing the Layout of the TPS5461x for Thermal Performance (Rev. A) SLVA113A Pulse Width Modulation Switching Power Supply Topology: Voltage vs. Current Mode SLUA119 Understanding Buck Power Stages in Switchboard Power Supplies SLVA057 Power Management Selection Guide SLUA219 Resonant Power Conversion Zero Voltage Switching Resonant Power Conversion SEM700 Topic 1* Resonant Mode Converter Topologies Additional Topics SEM700 Topic 6* Resonant Mode Converter Topologies SEM600 Topic 1* Sequencing and Tracking Outputs Dual Output Power Supply Sequencing for High Performance Processors SLVA117 Sequencing the TPS54X80 and TPS54X73 DC/DC Converters SLVA007 Power Supply Sequencing Solutions for Dual Supply Voltage DSPs SLVA073A TL5002 Provides DDR Bus Termination Power Supply Solution SLVA095 Using the TPS54372 DDR Memory/Active Bus Termination Synchronous PWM Switcher SLUA273 TI Power Solutions Power Up Altera FPGAs SLUA278 Snubber Circuits Snubber Circuits: Theory, Design and Application SEM900 Topic 2* Source/Sink and Terminator Power Designing for Small-Size, High-Frequency Applications with the TPS54xxx Family SLVA107 Synchronization A New Synchronization Circuit for Power Converters SLUA296 Synchronizing a PFC Controller from a Down Stream Controller Gate Drive SLUA245 Synchronous Rectifiers Synchronous Rectifiers of a Current Doubler SLUA287 The Use of Synchronous Rectifiers to the Design of Single Ended Forward Converters SEM1400 Topic 7* 50-W Forward Converter with Synchronous Rectification and Secondary Side Control SEM1300 Topic 4* Telephone Ring Generators A Complete Control Solution for a Four-Quadrant Flyback Converter SLUA060 Transient Response Fast Response Synchronous Buck Converter Design Using the TI TPS56xx Family SLVU007 Designing Fast Response Synchronous Buck Regulators Using the TPS5210 SLVA044 DC/DC Converter with Ceramic Output Capacitors Worst Case Analysis & Measurement SLVA126 Troubleshooting Practical Considerations in Troubleshooting and Optimizing Power Supply Control Circuits SEM1200 Topic 4* Off-Line SMPS Failure Modes, PWM Switchers and DC/DC Converters SLVA085 Texas Instruments Issue 1, 2004 Power Supply Control Applications Solutions

R E A L W O R L D S I G N A L P R O C E S S I N G TM TI Worldwide Technical Support Internet TI Semiconductor Product Information Center Home Page support.ti.com TI Semiconductor KnowledgeBase Home Page support.ti.com/sc/knowledgebase Product Information Centers Americas Phone +1(972) 644-5580 Fax +1(972) 927-6377 Internet/Email support.ti.com/sc/pic/americas.htm Europe, Middle East, and Africa Phone Belgium (English) +32 (0) 27 45 55 32 Finland (English) +358 (0) 9 25173948 France +33 (0) 1 30 70 11 64 Germany +49 (0) 8161 80 33 11 Israel (English) 1800 949 0107 Italy 800 79 11 37 Netherlands (English) +31 (0) 546 87 95 45 Spain +34 902 35 40 28 Sweden (English) +46 (0) 8587 555 22 United Kingdom +44 (0) 1604 66 33 99 Fax +(49) (0) 8161 80 2045 Internet support.ti.com/sc/pic/euro.htm Japan Fax International +81-3-3344-5317 Domestic 0120-81-0036 Internet/Email International support.ti.com/sc/pic/japan.htm Domestic www.tij.co.jp/pic Asia Phone International +886-2-23786800 Domestic Toll-Free Number Australia 1-800-999-084 China 800-820-8682 Hong Kong 800-96-5941 Indonesia 001-803-8861-1006 Korea 080-551-2804 Malaysia 1-800-80-3973 New Zealand 0800-446-934 Philippines 1-800-765-7404 Singapore 800-886-1028 Taiwan 0800-006800 Thailand 001-800-886-0010 Fax 886-2-2378-6808 Email tiasia@ti.com ti-china@ti.com Internet support.ti.com/sc/pic/asia.htm Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI s standard terms and conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer s applications or product designs, software performance, or infringement of patents. The publication of information regarding any other company s products or services does not constitute TI s approval, warranty or endorsement thereof. Real World Signal Processing and the black/red banner are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. A111103 For information on getting samples and EVMs go to: power.ti.com 2004 Texas Instruments Incorporated Printed in the U.S.A. Printed on recycled paper. SLUB007