Hopper and Drive Components

Similar documents
Hopper and Drive Components

96000 Hopper and Drive Components

Hopper and Drive Components

Hopper and Drive Components

Hopper and Drive Components

Hopper and Drive Components

V-Maxx G2 Hopper Spreader

V-Maxx G2 Hopper Spreader VX-1500

Precision Pro Spreader

Walk-Behind Broadcast Spreader

BP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.

PRO PLOW and POLY PRO PLOW Snowplows

Western Products, PO Box , Milwaukee, WI Blades 64750, 66980, & A&Q 66490; Lift Frame

Western Products, PO Box , Milwaukee, WI MIDWEIGHT Snowplow

PRO PLOW, PRO PLOW Series 2, POLY PRO PLOW and POLY PRO PLOW Series 2 Snowplows

Service Parts for PRO PLUS Plows

Walk-Behind Sprayer TL-80 & TL-80SS. Parts List

Model G " Planer/Moulder -33- G0477 Body Breakdown

SERVICE PARTS MANUAL

READ THIS FIRST Models G0544/G5850Z/ G5851Z/G7213Z

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.

ECOLAWN APPLICATOR PARTS LIST. Model ECO-100. Rev

700/705/710. Vehicle Mounted Brake Lathe & Rotor Driving Unit. Parts Identification

SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

B32157 UNDERCARRIAGE KIT. Jeep Cherokee Jeep Wagoneer Jeep Comanche Parts List and Installation Instructions CAUTION

Attachment Kit Ford 250 4x4 Super Duty Early 350 4x4 Super Duty Early 450 Super Duty Early 550 Super Duty Early

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

APPLICATOR ECOLAWN PARTS LIST

IN-BED FRAME MOUNT INSTALLATION INSTRUCTIONS

Repair Parts List DRYER MODEL NUMBER MDG30PCCWW. When requesting service or ordering parts, always provide the following information:

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter

" Tiller Attachment (1993) Page 1 of 5 Chain Case Assembly

Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

DIAMOND. MODEL: WS25 (December, 2006) FLUSH CUT WIRE SAW PARTS LIST P R O D U C T S. Part #

SECTION 9: PARTS Main

COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251

PARTS LIST: Air Control Assembly (1632 Sander)

HD38, HD58, HD78 REV

TAILGATE SPREADER MATERIAL SAVER SYSTEM INSTALLATION & OPERATION MANUAL (TGS 300, TGS 600, & TGS 1100) TGS11328

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET

MODELS: CC3730TE / CC3740TE

MODEL RA-2500N RADIAL ARM SAW

Parts Catalog Collector 34 Model Battery

PARTS LIST CHARGER 2716 DB

SECTION 9: PARTS Column Breakdown

Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2

J-3-D PART NO DATE:

Parts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) &

Parts List for Type 1

PARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A

M2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT


MMZ jr Hydrostatic Zero-Turn Riding Mower

Parts Catalog Collector 34 Model Gasoline

DUAL HEAD FLOOR GRINDER PARTS LIST MODEL CC200

Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A

Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252

Model W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040

SECTION 8: PARTS Main Parts Breakdown

50 Gordon Drive, Rockland, Maine sherplows.com MOUNT KIT

ST1014 PARTS ST1014 Headstock Breakdown

Section D ACCELERATOR

15" PLANER MODEL G1021Z PARTS LIST

GEAR HEAD METAL LATHE

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION

APS Small Seeds Box Assembly Instructions

Model W1854 (For Machines Mfd. Since 02/18) PARTS. Main Breakdown 42-1 PARTS -46-

PARTS LIST MS 2892-D

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

SECTION 9: PARTS G0513/G0513P/G0513ANV

Walk-Behind Lawn Mowers

HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART

TP1300 OWNERS MANUAL 13 INCH THICKNESS PLANER WITH LEGSET. For Your Safety: Read all instructions carefully Save this manual for future referenece

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000

Section D ACCELERATOR

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

Model W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-

DIAMOND MODEL CC1300-XL P R O D U C T S CONCRETE SAW PARTS LIST. March Part#:

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes

Repair Parts List DRYER MODEL NUMBER MDG30PNVWW. When requesting service or ordering parts, always provide the following information:

IMPORTANT: Chuck guard MUST be installed before drill chuck!

3000, 4000, 4100, 7500, 7700

SECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.

MODEL NO.: MI / 42100

MODEL W " WIDE BELT SANDER PARTS LIST. Phone: On-Line Technical Support:

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

3000, 4000, 4100, 7500, 7700

32 FRONT DECK ASSEMBLY

SECTION 9: PARTS. Main Breakdown -43- Model G0458Z (Mfd. Since 12/17)

HYDRAULIC CONTROL DETAILS PARTS LIST

SECTION 9: PARTS Jointer Breakdown

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *

Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:

Transcription:

Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-29 www.fi sherplows.com 96001 November 1, 20 Lit. No. 95921, Rev. 06 Hopper and Drive Components POLY-CASTER Hopper Spreader Parts List This Parts List is for FISHER POLY-CASTER Hopper Spreaders with serial numbers beginning with 0609 07. A SUBSIDIARY OF DOUGLAS DYNAMICS, L.L.C.

HOPPER COMPONENTS 22 1 6 3 7 9 8 5 12 10 20 22 4 28 2 27 26 21 29 32 31 30 32 28 25 33 34 35 36 46 52 53 45 54 44 48 42 43 55 53 41 40 Lit. No. 95921, Rev. 06 2 November 1, 20

Hopper Components Item Part Qty Description Item Part Qty Description 1 95931-1 1 Lid DS 29 95765 8 Hopper Mounting Bracket ns 95932-1 1 Lid PS 30 95830 4 Sleeve 4" 2 96041 1 Poly Hopper Body 31 95826 4 1/2- x 5-1/2 Hex Cap Screw SS 3 96107 1 Top Screen 32 68109 8 1/2 Flat Washer Wide SS 4 96380 1 Top Screen Brace with Label 33 90375 16 3/8-16 x 1 Carriage Bolt 5 67272 1 Label Information (Caution) 34 923 16 3/8 Flat Washer Wide SS 6 66438 4 3/8-16 x 1-1/2 Hex Cap Screw SS 35 91282 16 3/8 Lock Washer SS 7 95831 4 Top Screen Washer 36 91431 16 3/8-16 Hex Nut 8 95817 6 Hinge Pin 40 959-1 1 Chute Cover Kit (Includes CHMSL) 9 95818 12 Hinge Pin Retainer 41 65361 1 Center High Mounted Stoplight 10 P3045 2 Latch Kit 42 90693 2 #6 x 3/4 Machine Screw 8284K 1 Cable Boot 43 998 2 #6-32 Hex Locknut GB SS 12 8289 1 Boot Bracket 44 95772 1 Poly Feed Gate 96375 1 3/8 x 1 Sheet Metal Screw 45 95773 2 Feed Gate Guide 20 95897 1 Feed Gate Latch 46 95899 1 Feed Gate Handle 21 67158 2 1/4-20 x 1 Thumb Screw SS 48 95768 1 Feed Gate Stiffener 22 95829 16 3/16 Pop Rivet 52 67074 4 1/4-20 x 1 Machine Screw 25 95848 6 Handle Phillips Head Countersunk 26 95812 6 Sleeve 5" 53 67076 8 1/4-20 Hex Locknut GB SS 27 95825 6 1/2- x 7 Hex Cap Screw SS 54 96376 4 1/4-20 x 1-1/2 Hex Cap Screw SS 28 95834 10 1/2- Hex Locknut SS 55 67155 4 1/4 Flat Washer Special SS ns = not shown SS = Stainless Steel G = Grade Lit. No. 95921, Rev. 06 3 November 1, 20

DRIVE COMPONENTS 1 5 7 3 4 18 14 12 19 9 65 63 2 18 10 19 6 8 66 67 14 12 65 63 64 16 64 15 17 68 34 69 54 57 53 55 30 56 50 45 34 61 62 60 44 59 23 47 21 20 22 48 32 29 31 30 14 34 37 41 46 39 43 34 31 32 51 49 50 28 27 33 17 12 38 37 36 35 42 19 Lit. No. 95921, Rev. 06 4 November 1, 20

Drive Components Item Part Qty Description Item Part Qty Description 1 95785 1 Chute & Spinner Assy, Standard 46 65765 1 Pulley, 4-1/2 x 5/8 Bore 2 95950 1 Chute & Spinner Assy, Extended 47 95776 1 55-Tooth Sprocket #40 3 65777 1 Locking Collar, 3/4 Bore 48 95814 1 Gear Box Cover 4 674 1 3/4 Thrust Washer 49 68067 1 1/4-20 x 1 Hex Cap Screw SS 5 95795 1 Spinner Shaft, Standard Chute 50 67155 25 1/4 Flat Washer Special SS 6 95960 1 Spinner Shaft, Extended Chute 51 67159 1 3/16 Spacer 7 95796-1 1 Pulley, 4-1/2 x 3/4 Bore 53 95757-1 1 Cleated Conveyor Belt 8 95745 1 Pulley, 4-1/2 x 1 Bore 54 95770-1 2 Side Belt Guard 9 65776 2 Pillow Block Bearing, 3/4 Bore 55 95771 1 Front Belt Guard 10 20322 2 Pillow Block Bearing, 1 Bore 56 95963 1 Conveyor Roller Assembly, Idler 95850 8 5/16-18 x 3/4 Carriage Bolt SS 57 96376 12 1/4-20 x 1-1/2 Hex Cap Screw SS 12 90980 6 5/16 Flat Washer SS 59 95930 1 Conveyor Sill with Labels 91276 8 5/16 Spring Lock Washer SS 60 95762 2 Bearing Plate 14 91430 8 5/16-18 Hex Nut SS 61 68620 2 1/2- x 4 Take-Up Bolt SS 15 945 1 Poly Spinner Kit 62 67295 2 12- Hex Nut SS 16 94495 1 5/16-18 x 2-1/4 Hex Cap Screw SS 63 95819 2 Draw Latch 17 950 3 5/16-18 Hex Locknut GB SS 64 98020 8 #8 x 1/2 Machine Screw 18 68737 1 Refl ective Strip, Red/White 65 972 8 #8-32 Hex Locknut GB 19 68584 3 Label Information (Warning) 66 65174 1 1/4 x 1-1/2 Machine Key 20 95769 1 Poly Floor 67 95943 1 Pulley Kit, 4-1/2 x 1 Bore 21 95755-2 1 1/2 HP Motor 68 945 1 Spinner, Poly Service Kit 14.5" 22 95730 1 Motor Brace 69 94498 1 1/4-20 x 2-1/4 Hex Cap Screw SS 23 95777 1 -Tooth Sprocket #40 ns 95929 1 Conveyor Belt Lacing Pin 27 68605 1 Conveyor Roller, Drive ns 29248 1 Spreader Module 28 65753 1 Stub Shaft Conveyor Roller ns 95938 1 Label Information (Caution, Module) 29 68619 3 Flange Bearing 3/4 Bore ns 29217 1 Vehicle Power Cable 30 68621 4 3/8-16 x 1-1/4 Carriage Bolt ns 28585 1 Spreader Power Cable 31 91282 8 3/8 Spring Lock Washer SS ns 29221 1 Vehicle-Side Control Harness 32 91431 8 3/8-16 Hex Nut SS ns 29246 1 Cab Control 33 95926 2 1/4-20 x 2 Hex Cap Screw G8 ns 95744 1 Vehicle Only Component Kit 34 67076 14 1/4-20 Hex Locknut GB SS (Does not include Cab Control) 35 95756 1 Gear Box 20:1 ns 68794 1 CHMSL Harness Kit 36 95809 2 Gear Box Mounting Bracket ns 29253 1 Motor Cable 37 90551 5 5/16-18 x 1 Hex Cap Screw SS ns 95778 1 Drive Chain #40 38 68948 8 M16 Hex Cap Screw Special ns 95894 1 #40 Chain Master Link 39 93162 2 5/16-18 x 3/4 Hex Cap Screw SS ns 95836 1 100 Amp Fuse 41 67074 8 1/4-20 x 1 Machine Screw ns 95837 1 Fuse Holder Phillips Head Countersunk ns 225 1 22" Battery Cable 42 68662 1 Flange Bearing 4-Bolt, 5/8 Bore ns 94691 1 V-Belt 43 98378 4 3/8-16 x 1-1/4 Hex Cap Screw SS ns = not shown SS = Stainless Steel G = Grade Lit. No. 95921, Rev. 06 5 November 1, 20

Copyright 20 Douglas Dynamics, L.L.C. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, fi lm or other distribution and storage media, without the written consent of Fisher Engineering. Authorization to photocopy items for internal or personal use by Fisher Engineering outlets or spreader owner is granted. Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifi cations used. Fisher Engineering or the vehicle manufacturer may require or recommend optional equipment for spreaders. Do not exceed vehicle ratings with a spreader. Fisher Engineering offers a limited warranty for all spreaders and accessories. See separately printed page for this important information. The following are registered ( ) or unregistered ( ) trademarks of Douglas Dynamics, L.L.C.: FISHER, POLY-CASTER. Printed in U.S.A. Lit. No. 95921, Rev. 06 6 November 1, 20