DATA SHEET: Power DomiLED TM Power DomiLED TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > High brightness surface mount LED. > 10 viewing angle. > Small package outline (LxWxH) of 3. x.8 x 1.8mm. > Qualified according to JEDEC moisture sensitivity Level. > Compatible to IR reflow soldering. > Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL), > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). > Lighting: architecture lighting, general lighting, garden light, etc 005 DomiLED is a trademark of. All rights reserved. Product specifications are subject to change without notice. 1
Optical Characteristics (Tj=5 C) Part Ordering Number Color Viewing Angle Total Flux IF=30mA, mlm (typ) Luminous Intensity @ IF = 30mA IV (mcd) Min. Typ. Max. DWW-LJG-WX-1 DWW-LJG-XY1-1 Not for new design White White 10 10 7000 8900 1400.0 1800.0 40.0 850.0 850.0 3550.0 NOTE 1. All part number above comes in a quantity of 000 units per reel.. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. Electrical Characteristics at Tj=5 C Vf @ If = 30mA Vr @ Ir = 10uA Part Number Min. (V) Typ. (V) Max. (V) Min. (V) DWW-LJG.90 3.5 3.60 5 Forward voltages, Vf is measured with an accuracy of ± 0.1V. Absolute Maximum Ratings DC forward current Maximum Value 50 Unit ma Peak pulse current; (tp 10µs, Duty cycle = 0.005) 300 ma Reverse voltage; Ir (max) = 10µA 5 V ESD threshold (HBM) 000 V LED junction temperature 15 C Operating temperature -40 +110 C Storage temperature -40 +110 C Power dissipation (at room temperature) 00 mw Thermal resistance - Junction / ambient, R th JA - Junction / solder point, R th JS (Mounting on FR4 PCB, pad size >= 16 mm per pad) 300 130 K/W K/W
DWW, White Color Grouping 0.3900 White Bin Structure 0.3800 0.3700 0.3600 0.3500 0.3400 NL OL OK PL PK 0.3300 0.300 ML NK 0.3100 LL MK 0.3000 0.900 0.800 JL KL KK LK 0.700 JK 0.600 0.500 0.400 0.300 0.700 0.800 0.900 0.3000 0.3100 0.300 0.3300 0.3400 0.3500 0.3600 0.3700 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin JK JL KK KL NK NL OK OL LK LL MK ML PK PL 1 3 4 0.960 0.590 0.91 0.680 0.3045 0.715 0.3005 0.85 0.3081 0.38 0.335 0.346 0.3100 0.970 0.3070 0.310 0.3197 0.3131 0.3189 0.330 0.3388 0.3571 0.910 0.680 0.850 0.790 0.3005 0.85 0.960 0.955 0.38 0.3453 0.346 0.3591 0.3197 0.3131 0.3189 0.330 0.38 0.345 0.3571 0.3730 0.3005 0.85 0.960 0.955 0.3100 0.970 0.3070 0.310 0.346 0.3591 0.3571 0.3730 0.305 0.956 0.3197 0.3131 0.3081 0.38 0.358 0.3715 0.358 0.379 0.3045 0.715 0.3005 0.85 0.3130 0.840 0.3100 0.970 0.335 0.346 0.3388 0.3571 0.3130 0.840 0.3100 0.970 0.305 0.956 0.3197 0.3131 0.358 0.354 0.358 0.3715 InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 3
Luminous Intensity Group at Tj=5 C Brightness Group W X1 X Y1 Luminous Intensity IV (mcd) 1400.0... 1800.0 1800.0... 40.0 40.0... 850.0 850.0... 3550.0 Luminous intensity is measured with an accuracy of ± 11%. 4
ΔCX, Δ CY TM Relative Intensity Vs Forward Current Forward Current Vs Forward Voltage Relative Intensity; Normalized at 30mA.5 1.5 1 0.5 0 Forward Current, ma 60 50 40 30 0 10 0 0 10 0 30 40 50 60 70 80 90 100.5 3 3.5 4 4.5 Forward Current, ma Forward Voltage, V Forward Current Vs Ambient Temperature Relative Intensity Vs Wavelength 60 1 Forward Current; ma 50 40 30 0 10 Relative Intensity 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0. 0.1 0 0 10 0 30 40 50 60 70 80 90 100 110 10 0 400 300 450 500 550 600 700 650 700 900 750 1100 800 Ambient Temperature Wavelength, nm Chromaticity Coordinate Shift Radiation Pattern 0.000 0.0150 30 0 10 0 1.0 0.0100 0.0050 40 0.8 0.0000-0.0050 0050-0.0100-0.0150-0.000 0 5 10 15 0 5 30 35 40 45 50 Forward Current (ma) 50 60 70 80 90 0.6 0.4 0. 0 5
Power DomiLED TM Package Outlines Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 6
Recommended Solder Pad 7
Opto Innovating Innovating Illumination Illumination TM TM Taping Taping and and orientation InGaN InGaN White White : : DWW-LJG Reels Reels come come in in quantity quantity of of 000 000 units. units. Reel Reel diameter diameter is is 180 180 mm. mm. 8 8 3/01/014 V5.0
Packaging Specification 9
Packaging Specification Moisture sensitivity level Barcode label LOT NO : lotno ROHS Compliant PART NO : partno QTY : product quantity per reel GROUP : group S/N : serial no D/C: date code PB Free Moisture absorbent material + Moisture indicator Reel Label The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (000pcs) Weight (gram) 0.034 190 ± 10 TM Cardboard Box For Power DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 50 x 50 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 19,000 MAX 10
Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-00C) 300 75 55-60 C 10-30s 50 5 17 C Ramp-up 3 C/sec max. Temperature ( C) 00 175 150 15 100 75 Preheat 60-180s 50 480s max 5 0 50 100 150 00 Time (sec) 60-150s Rampdown 6 C/sec max. 11
Revision History Page - 5 Subjects Initial Release Update Thermal Resistance Update Operating Temperature and Storage Temperature Add new partno: DWW-LJG-XY1-1 Typo error on Vf Not for new design: DWW-LJG-WX-1 Add Graph: Chromaticity Coordinate Shift Date of Modification 05 Apr 01 13 Mar 013 19 Aug 013 05 Sep 013 3 Jan 014 0 Jun 014 01 Oct 014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, does not assume any liability arising out of the application or use of any product described herein. reserves the right to make changes to any products in order to improve reliability, function or design. products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of. 1
About Us is a dynamic Malaysian Corporation that is among the world s leading SMT LED Manufacturers. An excellence driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certifi ed quality assurance acclaim, s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 83 3566 Fax: +606 83 0566 E-mail: sales@dominant-semi.com TM