CG1-N C02-3 CM1-N B02-3 CM1-N C02-3 CP1-N C01-3 CP2-N C01-3

Similar documents
ELECTRICAL CONNECTORS

DeviceNet Series. Cables Cordset Accessories Receptacles Receptacle Accessories Junction Blocks

ED701 General Industry Pressure Transmitter

Amphenol. Advantage. R-Line R-146. Rectangular Attached Multi-Pin Industrial Cable Assemblies. Amphenol - Sine Systems

Profibus-PA. Profibus-PA. Process Automation. Over-Molded Cables Receptacles Field Wireables Accessories. UL File #: E

NEER Zinc Cable and Conduit Connectors For Flexible Metal Conduit

Cable Glands, Metal, for shielded EMC Cables CG.EM.*.*.*

4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories

Specifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21

Screw-in resistance thermometers with plug connector

3-10. General Quick Selection Introduction 3-Cordsets PannelConnect Safety. Connection. Network Media

FOR POWER AND DATA HEAVY DUTY CONNECTOR SYSTEM

Datasheet. Datasheet-No Type: GAN LU. Page: 1 of 9

MIK COMPACT MAGNETO-INDUCTIVE FLOWMETER

Level Measurement Continuous level measurement Radar transmitters

Setting Standards Connectors M 16

Temperature Sensor. Temperature Transmitter MPU-LCD with Display Product Information TSM and TSB FOOD SENSORS FOR FOOD AND LIFE SCIENCES.

Condumax W CLS19. Technical Information. Conductivity sensors Two-electrode sensors with cell constants k = 0.01 cm 1 or k = 0.

HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02

Resistance Thermometers Model Series TR7X0, Sheathed Design

Pressure measurement PBMR Fully welded pressure transmitter for railway applications

Holding Electromagnets

CONECTORES CIRCULARES M12 HÍBRIDOS

HARTING Han GND. People Power Partnership

Coil. Coil L 12 VDC 135 C 18 W 7.7 Ω M M 24 VDC 135 C 18 W 31 Ω M AMP Junior (AJ variant) Coil

QUICK REFERENCE. A-Size (7/8 ) powerfast. D-Size (1 3/8 ) powerfast. M16 powerfast. M23 powerfast. M40 powerfast. 3 & 4 pole 14 AWG conductors

Pressure transmitters MBS 4201, MBS 4251, MBS 4701 and MBS 4751

sealed mini usb connectors

HARTING Han-Power T Solutions

Multipole connectors

Electromagnetic flowmeters and switches DWM 1000/2000

Contents. Han Hv ES / Han Hv E Technical characteristics Han Hv ES Technical characteristics Han Hv E Han 3 Hv ES

Electromechanical pressure and vacuum switches 0

EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE

Heavy-duty Metal Body Safety Interlock Switch. DIN mounting pattern for globally recognized mounting configuration

3RH1 contactor relays, 4- and 8-pole

Condumax W CLS19. Technical Information. Conductivity sensors Two-electrode sensors with cell constants k = 0.01 cm 1 or k = 0.

OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)

SW 16mm. SW 15mm. SW 19mm

Magnetic level switches ERH-xx-20

JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor

Proportional Directional Control Valves Size 6

Technical data. Contact material: with double break or 2 NC contacts Switching system: A IEC snap action with positive break NC contacts

High-quality pressure transmitter For general industrial applications Model S-10

HQ series the powerful little connectors

Differential charge amplifier

IN-BUILDING ANTENNAS

P3-19 Series Connectors For Entertainment Lighting

Micro-Change. Cordset Family

Intrinsically safe pressure transmitter MBS 4201, MBS 4251, MBS 4701 and MBS 4751

CombiTemp TCR6 Standard RTD temperature sensor

Pressure transmitter for general industrial applications Model A-10

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

Temperature Sensors Types MBT 5250, MBT 5260 and MBT 5252

SB 50 Connectors - up to 120 amps

STANDARD RTD's INDEX

Conectores Circulares 7/8

Mineral-insulated resistance thermometers to EN

Ultrasonic level transmitter, non-contact

International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS

INLINE flowmeter for continuous flow measurement

Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009

Type matrix of inductive sensors

SIGNAL // POWER // INDUSTRIAL ETHERNET

Base Mounted Plug-in Unit

Direct solenoid and solenoid pilot operated valves

Mid-West. Instrument. Model 140 Electrical Installation and Operating Instructions. Gauge Front ELECTRICAL

Safety switches with slotted hole lever

3 EMC 3.1 SIMOVERT MASTERDRIVES EMC MASTERDRIVES EMC EN (VDE 0160 T100 IEC ) EN EN IEC 801 EN EMC

For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.

Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/4" to 1/2" NPT. Proportional Valves. Features.

Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors

OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)

Installation instructions Dec. 2002

Rosemount Specifications. Product Data Sheet , Rev BA February 2009 PERFORMANCE SPECIFICATIONS

Intrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F, IS-21-F

Controls Contactors and Contactor Assemblies Special Applications

2-jaw parallel self-centering pneumatic gripper (series GM)

Materials (other materials see WIKA diaphragm seal program) Model S-10

Customer Premise. Solutions for. Solutions for Customer Premise include products ranging from wall distribution to system distribution boxes.

Photoelectric Sensors XUV Sensors with Separate Optical Heads

LR Position Switches TECHNICAL DATASHEET

MULTI CONNECTION SYSTEM. Product Overview

Float switch For industrial applications, plastic version Model RLS-2000

S-band 500kW Magnetron

847H. Description. Features. Specifications

Pressure transmitter for general industrial applications Model A-10

Magnetic level indicators made in Australia under licence to Weka AG of Switzerland.

SPEC Pak. Sealed Power For Environmental Connections. Anderson Power Products. Marine Wind Power Lighting Transportation Pumps Ground Support

Safety light curtain to safeguard the hinge edge IMPORTANT NOTE

INLINE flowmeter for continuous flow measurement

Precision Junction Boxes

Rosemount 848L Logic Transmitter with FOUNDATION Fieldbus

Differential Charge Amplifier

Specifications (in accordance with DIN 16086) Equipment family Digibar II Type 1-PE50A1/...; K-PE PE00A1/...; K-PE00... Class of accuracy 0.2 0

Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator

FM series position switches

Digital flow ELEMENT transmitter for continuous flow measurement

Nemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4

JR12 Jam Nut Mount Optical Encoder

Transcription:

DIN 43650 Molded Cable Assemblies DIN Type DIN 43650 A Industrial Form B Industrial Form B DIN 43650 C Industrial Form C Pin Spacing (Between 1 & 2) 18mm 11mm 11mm 8mm 9.4mm Ground Type (Position) Dual Ground Dual Ground Dual Ground Dual Ground Dual Ground No Added Components CG1-N02-000-C02-3 CM1-N02-000-B02-3 CM1-N02-000-C02-3 CP1-N02-000-C01-3 CP2-N02-000-C01-3 CG1-N02-000-C02-5 CM1-N02-000-B02-5 CM1-N02-000-C02-5 CP1-N02-000-C01-5 CP2-N02-000-C01-5 CG1-N02-VL1-C02-3 CM1-N02-VL1-B02-3 CM1-N02-VL1-C02-3 CP1-N02-VL1-C01-3 CP2-N02-VL1-C01-3 CG1-N02-VL1-C02-5 CM1-N02-VL1-B02-5 CM1-N02-VL1-AC02-5 CP1-N02-VL1-C01-5 CP2-N02-VL1-C01-5 CG1-N02-VL2-C02-3 CM1-N02-VL2-B02-3 CM1-N02-VL2-C02-3 CP1-N02-VL2-C01-3 CP2-N02-VL2-C01-3 CG1-N02-VL2-C02-5 CM1-N02-VL2-B02-5 CM1-N02-VL2-C02-5 CP1-N02-VL2-C01-5 CP2-N02-VL2-C01-5 Protection Rating IP 67 IP 67 IP 67 IP 67 IP 67 Cable Type PVC (H05VVF) PVC (H05VVF) PVC (H05VVF) PVC (H03VVF) PVC (H03VVF) Conductor Size 18 AWG (.75mm2) 18 AWG (.75mm2) 18 AWG (.75mm2) 20 AWG (.50mm2) 20 AWG (.50mm2) Center Screw (Included) M3 x 28.7mm M3 x 28.7mm M3 x 28.7mm M2.5 x 21.5mm M3 x 21.5mm Gasket (Included) Flat NBR Flat NBR Flat NBR Flat NBR Flat NBR

DIN 43650 Cable Assemblies for Switches Four Wire Connectors Dual Color LED Connectors DIN Type DIN 43650 A DIN 43650 A DIN 43650 A DIN 43650 A Pin Spacing (Between 1 & 2) 18mm 18mm 18mm 18mm Both the Four Wire cable assemblies and the Dual Color LED cable assemblies are commonly used with filter or pressure switches. This version of the DIN43650A connector features 3 U shaped pins and 1 flat ground pin. Since, these assemblies are molded, you must choose the ground position for the cable exit best suited for your application. Ground Type (Position) Ground Up (12:00) Ground Down (6:00) Ground Up (12:00) Ground Down (6:00) No Added Components CG1-N03-000-BB2-3 CG1-N03-000-AB2-3 CG1-N03-000-BB2-5 CG1-N03-000-AB2-5 Dual Color LED Dual Color LED CG1-N03-LX1-BC2-3 CG1-N03-LX1-BC2-5 CG1-N03-LX2-BC2-3 CG1-N03-LX1-AC2-3 CG1-N03-LX1-AC2-5 CG1-N03-LX2-AC2-3 Dual Color LED s feature a five conductor cable. The blue wire is an independent negative for the LED s. This circuit prevents the LED s from interfering with the switch signal. CG1-N03-LX2-BC2-5 CG1-N03-LX2-AC2-5 Nominal Current 10A 10A 10A 10A Protection Rating IP 67 IP 67 IP 67 IP 67 Cable Type PVC (H05VVF) PVC (H05VVF) PVC (H05VVF) PVC (H05VVF) Conductor Size 18 AWG (.75mm2) 18 AWG (.75mm2) 18 AWG (.75mm2) 18 AWG (.75mm2) Center Screw (Included) M3 x 28.7mm M3 x 28.7mm M3 x 28.7mm M3 x 28.7mm Gasket (Included) Flat NBR Flat NBR Flat NBR Flat NBR D02

DIN 43650 Double Cable Assemblies DIN Type DIN 43650 A Industrial Form B Industrial Form B DIN 43650 C Industrial Form C Pin Spacing (Between 1 & 2) 18mm 11mm 11mm 8mm 9.4mm Ground Type (Position) Dual Ground Dual Ground Dual Ground Dual Ground Dual Ground Three and four position connector assemblies are also available! 200mm (7.8 ) Between Heads No Added Components CGD-N02-000-C02-1-200 CMD-N02-000-C02-1-200 CMD-N02-000-C02-1-200 CP1D-N02-000-C01-1-200 CP2D-N02-000-C01-1-200 CGD-N02-000-C02-3-200 CMD-N02-000-C02-3-200 CMD-N02-000-C02-3-200 CP1D-N02-000-C01-3-200 CP2D-N02-000-C01-3-200 CGD-N02-VL1-C02-1-200 CMD-N02-VL1-C02-1-200 CMD-N02-VL1-C02-1-200 CP1D-N02-VL1-C01-1-200 CP2D-N02-VL1-C01-1-200 CGD-N02-VL1-C02-3-200 CMD-N02-VL1-C02-3-200 CMD-N02-VL1-C02-3-200 CP1D-N02-VL1-C01-3-200 CP2D-N02-VL1-C01-3-200 CGD-N02-VL2-C02-1-200 CMD-N02-VL2-C02-1-200 CMD-N02-VL2-C02-1-200 CP1D-N02-VL2-C01-1-200 CP2D-N02-VL2-C01-1-200 CGD-N02-VL2-C02-3-200 CMD-N02-VL2-C02-3-200 CMD-N02-VL2-C02-3-200 CP1D-N02-VL2-C01-3-200 CP2D-N02-VL2-C01-3-200 Protection Rating IP 67 IP 67 IP 67 IP 67 IP 67 Cable Type PVC (H05VVF) PVC (H05VVF) PVC (H05VVF) PVC (H03VVF) PVC (H03VVF) Conductor Size 18 AWG (.75mm2) 18 AWG (.75mm2) 18 AWG (.75mm2) 20 AWG (.50mm2) 20 AWG (.50mm2) Center Screw (Included) M3 x 28.7mm M3 x 28.7mm M3 x 28.7mm M2.5 x 21.5mm M3 x 21.5mm Gasket (Included) Flat NBR Flat NBR Flat NBR Flat NBR Flat NBR D03

DIN 43650-M12 Molded Cable Assemblies DIN Type DIN 43650 A - M12 Industrial Form B - M12 Industrial Form B M12 DIN 43650 C M12 Industrial Form C M12 Pin Spacing (Between 1 & 2) 18mm 11mm 11mm 8mm 9.4mm Ground Type (Position) Dual Ground Dual Ground Dual Ground Dual Ground Dual Ground No Added Components. 12MD3-CG1-N02-000-C02-E 12MD3-CM1-N02-000-C02-E 12MD3-CM1-N02-000-C02-E 12MD3-CP1-N02-000-C01-E 12MD3-CP2-N02-000-C01-E 1.6. 1.6 12MD3-CG1-N02-000-C02-1 12MD3-CM1-N02-000-C02-1 12MD3-CM1-N02-000-C02-1 12MD3-CP1-N02-000-C01-1 12MD3-CP2-N02-000-C01-1 12MD3-CG1-N02-VL1-C02-E 12MD3-CM1-N02-VL1-C02-E 12MD3-CM1-N02-VL1-C02-E 12MD3-CP1-N02-VL1-C01-E 12MD3-CP2-N02-VL1-C01-E. 1.6 12MD3-CG1-N02-VL1-C02-1 12MD3-CM1-N02-VL1-C02-1 12MD3-CM1-N02-VL1-C02-1 12MD3-CP1-N02-VL1-C01-1 12MD3-CP2-N02-VL1-C01-1 12MD3-CG1-N02-VL2-C02-E 12MD3-CM1-N02-VL2-C02-E 12MD3-CM1-N02-VL2-C02-E 12MD3-CP1-N02-VL2-C01-E 12MD3-CP2-N02-VL2-C01-E 12MD3-CG1-N02-VL2-C02-1 12MD3-CM1-N02-VL2-C02-1 12MD3-CM1-N02-VL2-C02-1 12MD3-CP1-N02-VL2-C01-1 12MD3-CP2-N02-VL2-C01-1 Protection Rating IP 67 IP 67 IP 67 IP 67 IP 67 Cable Type PVC (H05VVF) PVC (H05VVF) PVC (H05VVF) PVC (H03VVF) PVC (H03VVF) Conductor Size 18 AWG (.75mm2) 18 AWG (.75mm2) 18 AWG (.75mm2) 20 AWG (.50mm2) 20 AWG (.50mm2) Center Screw (Included) M3 x 28.7mm M3 x 28.7mm M3 x 28.7mm M2.5 x 21.5mm M3 x 21.5mm Gasket (Included) Flat NBR Flat NBR Flat NBR Flat NBR Flat NBR D04

DIN 43650 Plain Connectors DIN Type DIN 43650 A DIN 43650 A Industrial Form B DIN 43650 C Industrial Form C Pin Spacing (Between 1 & 2) 18mm 18mm 11mm 8mm 9.4mm Cable Entry Gland Pg 9 / 11 ½ NPT Pg 9 Pg 7 Pg 7 Circuit 3 Poles No Added Components Part Numbers G1-NU2-000 G1-NF2-000 M1-NS2-000 P1-NSZ-000 P2-NZ2-000 4 Poles No Added Components G1-NU3-000 G1-NF3-000 P1-NZ3-000 P2-NZ3-000 Protection Rating IP 65 IP 65 IP 65 IP 65 IP 65 Cable OD Range.23 to.43 (6 11mm) NA.23 to.31 (6 8mm).15 to.23 (4 6mm).15 to.23 (4 6mm) Maximum Conductor Size 16 AWG (1.5mm2) 16 AWG (1.5mm2) 16 AWG (1.5mm2) 18 AWG (.75mm2) 18 AWG (.75mm2) Center Screw (Included) M3 x 32.5mm M3 x 32.5mm M3 x 32.5mm M2.5 x 28.5mm M3 x 28.5mm Gasket (Included) Sectional NBR Sectional NBR Sectional NBR Sectional NBR Sectional NBR D05

DIN 43650 Plain Connectors DIN Type DIN 43650 A DIN 43650 A Industrial Form B DIN 43650 C Industrial Form C Pin Spacing (Between 1 & 2) 18mm 18mm 11mm 8mm 9.4mm Cable Entry Gland Pg 9 / 11 ½ NPT Pg 9 Pg 7 Pg 7 See DIN 43650 Plain Connectors for Dimensional Drawings Circuit Voltage Part Numbers LED Only 24V G1-TU2-L01 G1-TF2-L01-TS2-L01 P1-TZ2-L01 P2-TZ2-L01 110V G1-TU2-L02 G1-TF2-L02 M1-TS2-L02 P1-TZ2-L02 P2-TZ2-L02 24V G1-TU2-VL1 G1-TF2-VL1-TS2-VL1 P1-TZ2-VL1 P2-TZ2-VL1 110V G1-TU2-VL2 G1-TF2-VL2 M1-TS2-VL2 P1-TZ2-VL2 P2-TZ2-VL2 LED & Diode 24V G1-TU2-DL1 G1-TF2-DL1-TS2-DL1 P1-TZ2-DL1 P2-TZ2-DL1 110V G1-TU2-DL2 G1-TF2-DL2 M1-TS2-DL2 P1-TZ2-DL2 P2-TZ2-DL2 Rectifier 110V G1-TU2-RL2 G1-TF2-RL2 Protection Rating IP 65 IP 65 IP 65 IP 65 IP 65 Cable OD Range.23 to.43 (6 11mm) NA.23 to.31 (6 8mm).15 to.23 (4 6mm).15 to.23 (4 6mm) Maximum Conductor Size 16 AWG (1.5mm2) 16 AWG (1.5mm2) 16 AWG (1.5mm2) 18 AWG (.75mm2) 18 AWG (.75mm2) Center Screw (Included) M3 x 32.5mm M3 x 32.5mm M3 x 32.5mm M2.5 x 28.5mm M3 x 28.5mm Gasket (Included) Sectional NBR Sectional NBR Sectional NBR Sectional NBR Sectional NBR D06

DIN 43650 Male Connectors DIN 43650 A (18mm) DIN 43650 A (18mm) DIN 43650 A (18mm) DIN 43650 A (18mm) DIN 43650 A (18mm) DIN 43650 A (18mm) Flat Mounting Flat Mounting Flat Mounting (thru holes) Cylinder Mount Cylinder Mount Cylinder Mount With 4 Mounting Holes With 2 Mounting Holes With 2 Mounting Holes 80mm Diameter 100mm Diameter 160mm Diameter BG1-N02-000 BG2-N02-000 BG5-N02-000 BG8-N02-000 BG10-N02-000 BG16-N02-000 BG1-N03-000 BG2-N03-000 BG5-N03-000 BG8-N03-000 BG10-N03-000 BG16-N03-000 DIN 43650 A (18mm) DIN 43650 A (18mm) DIN 43650 A (18mm) Industrial Form B (11) Industrial Form C (9.4) Industrial Form C (9.4) Round Base Round Base With Male ½ Flat Panel Flat Panel Flat Mounting With Collar For Molding NPT Threads Mounting Mounting Into 15mm Hole BGR-N02-000 BG7-N02-000 GSP 212 BM1-N02-000 BP2-N02-000 BG1-N02-000 BGR-N03-000 BG7-N03-000 GSP 312 BP2-N03-000 BG1-N03-000 D07