CURRICULUM VITAE Mohd Foad Abdul Hamid, PhD, CEng, CMarEng, GradIEM, Universiti Teknologi Malaysia 81310 UTM Skudai, Johor mfah@fkm.utm.my 1. Academic Qualification: Degree Doctor of Philosophy (Computational Mechanics and Electronic Packaging) Master of Science in Civil Engineering (Computational Mechanics and Finite Element Analysis) Master of Science in Mechanical Engineering (Reliability Engineering and Probabilistic Design) Bachelor of Science in Mechanical Engineering Awarding Institution State University of New York at Buffalo, USA State University of New York at Buffalo, USA The University of Arizona, USA University of Arizona, USA 2. Professional Qualification: - Chartered Engineer (CEng) Engineering Council, United Kingdom Registration number: 606533 - Chartered Marine Engineer (CMarEng) Institute of Marine Engineering, Science and Technology (IMarEST), United Kingdom Registration number: 8010485 - Graduate Member (GradIEM) The Institution of Engineers, Malaysia Registration number: 17388 - Registered Mechanical Engineer Board of Engineer, Malaysia Registration number: 19629A 3. Specialization: Reliability Engineering and Probabilistic Design, Asset Performance and Integrity, Probability and Statistical Analysis, Finite Element Analysis 4. Working Experiences: 2/2010 Universiti Teknologi Malaysia, Senior Lecturer 3/2011, and 7/2012 present Teaching postgraduate level classes Supervising postgraduate researches and projects Supervising undergraduate projects Conducting researches
Academic advising Administrative post (January 2013 present): 1. Post graduate taught course program coordinator Coordinate offering of taught-course subjects. Assist Deputy Dean in managing and marketing of master s program. 2. Coordinator for engineering design program Curriculum planning, development and monitoring, and a member of academic and curriculum committee, for both undergraduate and post graduate studies. Coordinate final year project for undergraduate and master s project for taught course students. 4/2011 to 6/2012 Bureau Veritas Technical Center (South East Asia) Technical Head and Head of Mechanical Integrity Department Major Projects: 1. Structure Integrity Management System for PTTEP Thailand Establish marine growth design thickness for Bongkot field using probability theory. Sensitivity study of marine growth thickness to wave loading. Construct likelihood of failure bands for RBI approach in Structural Integrity Management using probability and statistics approach. 2. Mechanical Integrity for PETRONAS Carigali Process Safety Management Preparing Specific Equipment Reliability Plan (SERP) including SOL COP-NEL. Updating Carigali Maintenance Management Guideline (CMMG) to include reliability approach to maintenance. 3. Bekok C Structural Integrity Assessment and Life Extension for PETRONAS Carigali Project manager. 4. Malaysia International Shipping Corporation (MISC) Asset Integrity and Reliability Engineering Training Conducting a two-day Reliability Engineering training to MISC Engineers and managers. 3/2010 to Scientige Sdn. Bhd. (A Bureau Veritas Group Principal Engineer 3/2011 Company) Major Projects: 1. Load and Resistance Factor Design (LRFD) Approach to Design of PETRONAS Offshore Structure Highlight differences between API RP-2A WSD, ISO 19902, and PTS design practice. Propose new marine growth design thickness based on the probabilistic analysis of marine growth data. Conduct LRFD training to PETRONAS engineers. Conduct LRFD technical seminars to PETRONAS project members. Co-author project definition study and author technical reports. Establish qualitative criteria for selecting platforms for LRFD study. 2. Engineering Notes for PETRONAS Author of Metocean Loads chapter, includes theory and numerical examples.
3. PETRONAS Carigali Sdn. Bhd. Seismic Risk Ranking Establish an updated seismic risk ranking loop for PETRONAS SICS system. 8/2009 2/2010 Universiti Teknologi Malaysia, Head of Engineering Design Planning and coordinating courses to be offered Managing courses offered by the department Monitoring quality of courses 8/2007 5/2008 South Campus Instrument Center, State University of New York at Buffalo, USA Scanning Electron Microscope and Electron Dispersion X- Ray Technician Preparing samples for scanning Interpreting scan results 8/2007 5/2008 Department of Civil, Structural and Environmental Engineering, State University of New York at Buffalo, USA Maintaining computer network and system servers Webpage content update Establishing firewall and intrusion detection system Creating centralize authentication system and file storage Procurement of software, computer peripheral and hardware Interfacing building access system with computer network Computer Network and System Administrator 2/1996 Universiti Teknologi Malaysia, Lecturer 2/2010 Teaching postgraduate level classes Supervising postgraduate researches and projects Supervising undergraduate projects Conducting researches Academic advising 5/1999 5/2002 Universiti Teknologi Malaysia, Computer Network System Administrator Designing network topology Procuring of hardware and software Building and customizing network servers and security systems
3/1993 8/2000 Autodesk Training Center, Universiti Teknologi Malaysia AutoCAD Instructor (Part time) Teaching AutoCAD Level 1 2D Drafting Teaching AutoCAD Level 2 3D Modelling 12/1991 Universiti Teknologi Malaysia, Assistant Lecturer 2/1996 Teaching undergraduates Conducting lab experiments Academic Advising 8/1991 12/1991 Aiwa Electronics (Malaysia) Manufacturing Engineer Transferring new models from Japan for manufacturing Troubleshooting assembly problems Supervising production lines 8/1990 8/1991 Robert Bosch (Malaysia) Quality Assurance Engineer Determining incoming parts quality and outgoing assembled products Troubleshooting quality problems Assisting production line with quality issues 5. Training Engineering Management Board of Engineers, Malaysia 27th 28th January 2014 Code of Ethics Board of Engineers, Malaysia 12th 13th September 2013 Hydrodynamic Design of Deep Water Offshore Structure by Professor Atilla Incecik 6th September 2012 Subsea Engineering Training by Professor John Strutt Module 1: Subsea Reliability and Integrity Management 22nd 24th February 2011 Subsea Engineering Training by Professor John Strutt
Module 2: Subsea Operation Performance, Maintenance and Sparing 28th February 2nd March 2011 Meridium Asset Performance Management Software o Basic User Module 11th 12th April 2011 o o Reliability Centred Maintenance 25th April 6th May 2011 Mechanical Integrity 27th June 8th Jul 2011 SESAM: User Course in General FE and Wave Load Analysis Det Norske Veritas, Hovik, Norway 7th 11th February 2000 SESAM and USFOS for Static and Progressive Collapse Analysis of Jacket Structures Det Norske Veritas, Kuala Lumpur, Malaysia 15th 17th May 2000 6. Computer Skills: Microsoft Office Suite AUTOCAD Software ABAQUS Finite Element Analysis Software Microsoft Windows Client and Server Operating System Linux and Unix Operating System 7. Awards Chair s Graduate Recognition Award 2006 Department of Civil, Structural, and Environmental Engineering University at Buffalo, USA Presented to student, by the chair, who has demonstrated high scholastic achievement and dedication to the Department of Civil, Structural, and Environmental Engineering University Excellence Award 2000 Universiti Teknologi Malaysia Awarded for outstanding work performance for the year 2000 Outstanding AutoCAD R14 Technical Skills Award May 1997, Autodesk Asia 8. International Journal Publications B. Idrus, S.P. Narayanan, M. F. A. Hamid, Z. Nizamani, N. J. Cossa, Statistical Parameters of Steel Tubular Member Design for Offshore Platforms in Malaysia, Advances in Steel and Aluminium Structures, 2011, Pages 117-121. B. Idrus, S.P. Narayanan, M. F. A. Hamid, Z. Nizamani, N. J. Cossa, Selection of Environmental Parameters for Offshore Jacket Platform Design in Malaysia, Advances in Steel and Aluminium Structures, 2011, Pages 383-387. C. Basaran and M. F. Abdulhamid, "Low Temperature Electromigration and Thermomigration in Lead-free Solder Joints," Mechanics of Materials, Nov 2009, Volume 41, Issue 11, Pages 1223-1241.
M.F. Abdulhamid, C. Basaran and Y-.S Lai, Thermomigration versus Electromigration in Microelectronic Solder Joints, IEEE Transactions on Advanced Packaging, Aug 2009, vol 32, pp 627-635. M.F. Abdulhamid, and C. Basaran, Influence of Thermomigration on Lead-free Solder Joint Mechanical Properties, American Society of Mechanical Engineer Journal of Electronic Packaging, Mar 2009, vol 131, pp, 011002-1. M.F. Abdulhamid, S. Li and C. Basaran, Thermomigration in Leadfree Solder Joints, International Journal of Materials and Structural Integrity, 2008, Vol 2, Nos. 1/2, pp 11 34. L. Shidong, M.F. Abdulhamid, and C. Basaran, "Damage Mechanics of Low Temperature Electromigration and Thermomigration," Advanced Packaging, IEEE Transactions on, vol. 32, pp. 478-485, 2009. C. Basaran, S. Li and M.F. Abdulhamid, Thermomigration Induced Degradation in Solder Alloys, Journal of Applied Physics, 2008, vol 103, pp 123520. S. Li, M.F. Abdul Hamid, C. Basaran, Simulating Damage Mechanics of Electromigration and Thermomigration, Simulation: Transactions of the Society for Modeling and Simulation International, 2008, vol 84(8-9), pp 391-40. 9. International Conference Publications Arazi B. Idrus, Narayanan Sambu Potty, Mohd Foad Abdul Hamid, Nelson J Cossa, Zafarullah Nizamani, Resistance Parameters Statistics for Jacket Platforms in Offshore Malaysia, in International Offshore and Polar Engineering Conference, Hawaii, June 2011. A. Idrus, M.F. Abdulhamid, N.S. Potty, N.J. Cossa, Numerical Comparison of Tubular Joint Strength in Offshore Codes, in The Asia Pacific Offshore Conference, Kuala Lumpur, Malaysia, 2010. A. Idrus, N.S. Potty, M.F. Abdulhamid, Z. Nizamani, Comparison of Foundation Strength Modelling of Jacket Platforms in API RP 2A Codes and ISO 19902, in The Asia Pacific Offshore Conference, Kuala Lumpur, Malaysia, 2010. A. Idrus, N.S. Potty, M.F. Abdulhamid, Z. Nizamani, Hydrodynamic Load Models for Offshore Jacket Platforms: Comparison of API and ISO Codes, in The Asia Pacific Offshore Conference, Kuala Lumpur, Malaysia, 2010. C. Basaran and M. F. Abdulhamid, "Low Temperature Electromigration and Thermomigration in Lead-free Solder Joints," in 33rd International Electronics Manufacturing Technology Conference, Penang, Malaysia, 2008. M.F. Abdul Hamid, C. Basaran, Simulating Degradation in High Density Power Electronics Packaging, in The Society for Modeling & Simulation International 2008 Summer Computer Simulation Conference, Edinburgh, Scotland, 2008. M.F. Abdulhamid, C. Basaran, and D.C. Hopkins, Experimental Study of Thermomigration in Lead-Free Nanoelectronics Solder Joints, in ASME International Mechanical Engineering Congress and Exposition, Chicago, Ill, 2006. S. Li, M. Lin, M.F. Abdulhamid, and C. Basaran, Thermomigration Induced Strain Field Simulation for Microelectronic Lead Free Solder Joints, in ASME International Mechanical Engineering Congress and Exposition, Chicago, Ill, 2006. 10. Other Publications Mohd Foad Abdul Hamid, Azhari Haron, Jaafar Ahmad, Application of Probability and Statistics in Constructing Likelihood of Failure Bands for RBI Approach in Structural Integrity Management, Paper presented at Managing and Challenges in Asset Integrity Management Implementation Conference by Asset Integrity Management Working Group Malaysian Oil and Gas Services Council, Kuala Lumpur, January 2012. M.F. Abdulhamid and Thanapalasingam, I, Implementing a Parallel Processing System in Computational Structural Mechanics and Probabilistic Simulations, Research Monograph, Research Management Centre, Universiti Teknologi Malaysia, 2006.