GENERAL EQUIPMENT. Longspan Shelving 106. Personal Lockers 108. FlexiTool Storage System 109. Workbenches 110. General Cleaning 111

Similar documents
WORKSHOP FURNITURE. Rugged, Heavy Duty, Quality Steel Construction. Optional drawer. Lower shelf same length as worktop

Coolville Display Co., LTD. Add: NO.17, North District, Lingdou, Xiamen, China

Accessories and workbenches

Solutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs

Wagons & Chests. Tool Sets. (FA Series) Modular Storage Tray Sets. Full-extension ball bearing drawer slides open and close easier

Euro Cabinet System. Euro Cabinet System. Euro Cabinet System. Strong steel storage cabinet system for tough environments.

BENCH MASTER THE STRENGTH IS IN THE FRAME EXTRA STRONG ALL STEEL FULLY WELDED READY TO USE FREE. Heavy Duty Workbenches. Mobile Workbenches

Organisational Kitchen Fittings Kitchen Cabinet Accessories

INDUSTRIAL WORKBENCHES EASY ORDER GUIDE

IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity

Factory Assistance: Phone: Fax: Page 1

Shelving for picking STORAGE TECHNOLOGIES & MATERIAL HANDLING

WTC Industrial Mobile Tooling Cabinet Workstation

ACCESSORIES RETAIL PRICELIST

industrial fitting THE CABINET THAT CHANGES CABINETS

DIY STEP-BY-STEP INSTALLATION GUIDE (PAGE 12) Create your space.

SLIDING GATES BRUNDLE

IWB-40 - Industrial Work Bench

FREE EVOLVE CHEST KIT 214 PIECE METRIC & IMPERIAL PART NO P1400. GST INCLUSIVE OFFER VALID UNTIL 29/02/2016 Offer available in Australia only.

A.C.T. is A Proud Stocking Distributor of

5. Outdoor equipment. Barrier posts. Stainless steel

KRM-K-LLCPC-T KRM LOTO LOCKABLE LOTO CARRY PERMIT CENTER / LOTO CARRY CENTER / LOTO PADLOCK CENTER

PUSH IN MANUAL DRAWER RETENTION DUAL GLOSS & STABILISED POWDER COAT FREE EVOLVE TROLLEY 6 DRAWER PART NO TFL-P1408 VALUED AT

Chain, Rope & Accessories

LOCKERS BEDS CABINETS WORKSHOP. Made in U.A.E.

FREE EVOLVE CHEST KIT 214 PIECE METRIC & IMPERIAL APPRENTICE EXCLUSIVE. Bonus offer via redemption PART NO P1400

FREE EVOLVE CHEST KIT 214 PIECE METRIC & IMPERIAL. Bonus offer via redemption PART NO P1400 EVOLVE TOOL CHEST 7 DRAWER 666 X 410 X 475MM

so easy to install, so simple to use, so affordable;

Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20

Flipchart Easels and Rail Systems

WORKSHOP INTERIOR FOR THE COMMITTED

IWB-12 - Industrial Work Bench

ArcStation. Build your ArcStation. ArcStation. The only workbench designed for welders. MillerWelds.com/ArcStation. MillerWelds.

DISPLAY UNITS (HEATED/CHILLED)

More Choice. Toolboxes, Trailers & Accessories

Interior Equipment/Shop Fittings

EVOLVE TOOL CHEST 7 DRAWER

Australian Designed and Owned.

NEW GARAGE STORAGE SYSTEM

NEW! Tool Trays for Roller Cabinets and Top Chests

Ranford Primary School. Furniture

Table of Contents. Steel Frame Bench...3. Workbench Island Locker Bench Pedestal Bench Table...8. Specialty Project Workstation...

SHELVIT SHELVING SYSTEMS

K.D. DEFIANT II LOCKER ASSEMBLY INSTRUCTIONS

Technical Supplies & Services Co. L.L.C.

ADJUSTABLE SHELVING & STORAGE MODULES

Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax

Merchandising Solutions Turn O Matic

Wire Mesh Cable Tray System for Channeling of Cable Wiring

STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal

VWR LABORATORY BENCHES. Ergonomic, Flexible Lab System for Today s Modern Laboratories

GO STEEL STEEL FURNITURE. Mile End Office Furniture

Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.

1/4", 3/8", 1/2" Drive Sockets

CONTENTS DISPLAY STANDS BASKETWARE POLYWICKER WOODEN CRATES & RISERS PRESENTATION BOARDS METALWARE SIGNAGE & POINT OF SALE

WK9 WORKTOP KIT Assembly Guide

Outdoor equipment. Barrier posts. Stainless steel. Barrier elements. Barrier poles. Outdoor equipment - pages

KNIPEX Quality Made in Germany. Product Presentation. at the Point of Sale. Preliminary version - for internal use only!

IAC INDUSTRIES 895 BEACON STREET BREA, CA Phone (714) Fax (714) Workmaster Assembly Instructions

Wanco Electric & Machinery Pte Ltd. Cable Management Systems. Cable Trunking

SRS IT cabinets. Installation height numbering as a standard

Lock and file in modern style

VWR LABORATORY BENCHES

Locks and Catches Catches and Furniture Bolts

IVC 60/30 Tact². Wear-resistant side channel compressor. Waste container with set-down mechanism. With compact flat pleated filter

Acrylic Display Manufacturing a division of Piasa Plastics, Inc.

CLOTHING RACKS Great Quality, Style & Value

Stainless Steel Equipment Brochure

STAINLESS STEEL AUSTRALIA

H HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT

T H E S E W I N G F U R N I T U R E S P E C I A L I S T S

System 3000 specifications

BSC Industrial Storage Cabinet

2015 Q1 Lifetime W NEW PRODUCTS arranty

mk Profile Technology

Durability. Evolution. Organization. Think Innovation, Durability, Quality. Modular Drawer System. Spider Shelving System. Workstation System

Assembly, Installation, Maintenance and Operation Instructions For

BENCHES, TABLES, & MORE!

L & T Open Shelf Filing System

MADE IN GERMANY. Developed & Manufactured By. Drawer Runner System.

DESIGN & INNOVATION SINCE 1946 RIBBON SEATING & TABLES

Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS

sistemare CABINET, WALL AND CONTAINER SYSTEM

The art of linking minds.

K.D. LOCKER ASSEMBLY INSTRUCTIONS

1. Field measurements must be taken to verify existing conditions prior to installation.

CONSTRUCTION TOOLS. Innovation is our mission!

ADA OPERATIONS & MAINTENANCE FACILITY 148 ROBERTS STREET, EAST HARTFORD, CT RFP #: APPROVED EQUAL FURNITURE SPECIFICATIONS & PRIC SCHEDULE

Metal Components Incorporated

Bollards, Column Guards, Corner Guards, Wheel Stops, Speed Humps & Fixings. Lockinex. ea i, ea u i

SPEEDFRAME. The speedy way to be individual. The all purpose construction

Brick : Tool Belts/Holsters/Pouches

INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY

Technical Environment Systems INSTALLATION MANUAL

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel

There s one thing. that drives us: creating a custom closet. you will love. BE INSPIRED

There s one thing. that drives us: creating a custom closet. you will love.

FASTENERS 701L, 701L-ASS 701L-C. Over Centre Fasteners 701 Series. Over Centre Fasteners 701 Series

IVC 60/30 Ap 1 Automatic Filter Cleaning System Tact² 3 Waste container with set-down mechanism

Transcription:

GENERAL EQUIPMENT Longspan Shelving 106 Personal Lockers 108 FlexiTool Storage System 109 Workbenches 110 General Cleaning 111 Custom Made Trolleys 114

Longspan Shelving Longspan shelving is ideal for box storage, archive shelving, retail displays, spare parts, storerooms, sea containers, warehouses, workshops, workbenches and any other industrial, commercial or domestic use. Longspan Shelving is very easy to assemble and is a quick and economical way to transform your storage area. Our frames come pre-assembled to make assembly quick and simple. 1800mm Longspan - 4 Shelf 1800mm Longspan - 5 Shelf 2000H x 1800W x 460D mm 2000H x 1800W x 605D mm 1920mm 1920mm 400kg 400kg 2000mm Longspan - 4 Shelf 2000mm Longspan - 5 Shelf 2000H x 2000W x 460D mm 2000H x 2000W x 605D mm 2120mm 1920mm 350kg 400kg 2400mm Longspan - 4 Shelf 2400mm Longspan - 5 Shelf 2000H x 2400W x 460D mm 2000H x 2400W x 605D mm 2520mm 1920mm 250kg 400kg 106 GENERAL EQUIPMENT

Longspan Shelving SHELF OPTIONS BEAM CONNECTORS Chipboard Meshdeck Galvanised Metal Heights Depths Beam Length Load Capacity Finish 2000mm, 2400mm, 3000mm 460mm, 605mm, 900mm 1000mm, 1500mm, 1800mm, 2000mm, 2400mm 900kg, 550kg, 400kg, 350kg, 250kg Powder Coated Grey Shelving - 5 Shelf Post Style with ABS REAL TUFF Shelves ABS Real Tuff Removable Shelves. Welded 32mm x 2.5mm Roll Formed Section Frames. Available Shelf lengths from 600mm to 1800mm in increments of 150mm. Width can be 300, 450, 525 or 600mm deep. Finishes available are Zinc Lacquered, Polished Stainless Steel, Hot Dip Galvanised or Powder Coated. Shelving - 5 Shelf Post Style with Wire Grid Strong Wire Shelves give allow maximum airflow. Welded 32mm x 2.5mm Roll Formed Section Frames with Wire Grid of 4mm. Available Shelf lengths from 600mm to 1800mm in increments of 150mm. Width can be 300, 375, 450, 525 or 600mm deep. Finishes available are Zinc Lacquered, Polished Stainless Steel, Hot Dip Galvanised or Powder Coated. www.teamsystems.net.au 107

Personal Lockers SOC001-2 Door Locker Cabinet SOC020-3 Door Locker Cabinet 1830H x 915W x 455D mm 1830H x 915W x 455D mm Door Full Length Dual Doors Door Full Length Triple Doors Shelves 4 Raised Adjustable Shelves plus Base Shelf Shelves 1 Raised Adjustable Shelf plus Base Shelf 120kg 120kg Lock Padlock (Not Supplied) Lock Padlock (Not Supplied) Finish Powder Coated Light Grey Finish Powder Coated Light Grey Flat Pack Yes - Assembly Options Available Flat Pack Yes - Assembly Options Available SOC030-6 Door Locker Cabinet SOC040-12 Door Locker Cabinet 1830H x 915W x 455D mm 1830H x 915W x 455D mm Door Size 850 x 250mm Door Size 415 x 250mm Shelves 1 Raised Adjustable Shelf plus Base Shelf Shelves N/A 120kg N/A Lock Padlock (Not Supplied) Lock Padlock (Not Supplied) Finish Powder Coated Light Grey Finish Powder Coated Light Grey Flat Pack Yes - Assembly Options Available Flat Pack Yes - Assembly Options Available 108 GENERAL EQUIPMENT

FlexiTool Board System TEAM SYSTEMS FlexiTool Board System Our NEW Tool Storage System gets you organised in the workshop! The FlexiTool Board System comes in 3 different comprehensive kits with all the accessories you need to get started or expand your exsiting system as your tool storage needs grow. Guaranteed to get your tools and equipment off the bench and help you organise your work area with all your tools within easy reach. Versatile, Stylish and Heavy Duty! Size Contents KIT A 1 x 530 x 488mm 13 Piece KIT B 1 x 1140 x 488mm 21 Piece KIT C 2 x 1140 x 488mm 32 Piece DIFFERENT HOOKS, TRAYS, HANGERS & HOLDERS TO STORE YOUR TOOLS! NEW RELEASE GET ORGANISED! SUITS ALL TYPES OF HAND TOOLS & EQUIPMENT! NEW SYSTEM STYLISH, HEAVY DUTY KITS! KIT A - 13 PIECE KIT A INCLUDES: 2 x Screwdriver & Plier Holder 3 x Single Hook with Curved Tip (Short) 2 x Single Hook with Curved Tip (Long) 1 x Wrench Holder 1 x Double Hook with Curved Tip (Short) 1 x Power Tool Hanger (Small) 1 x Curved Hook 1 x Hex Key/Drill Bit Holder 1 x Wall Mounted Tool Panel EXPANDABLE ADD PANELS AS REQUIRED TO SUIT YOUR NEEDS! FLEXIBLE DESIGN CUSTOMISE THE LAYOUT TO FIT YOUR SPACE! KIT B - 21 PIECE KIT C - 32 PIECE KIT B INCLUDES: 2 x Screwdriver & Plier Holder 4 x Single Hook with Curved Tip (Short) 1 x Power Tool Hanger (Small) 1 x Heavy Duty Hanger 2 x Double Hook with Curved Tip (Short) 3 x Single Hook with Curved Tip (Long) 2 x Curved Hook 1 x Hex Key/Drill Bit Holder 1 x Multi - Purpose Tray 1 x Wrench Holder 1 x Screwdriver Holder 1 x Cord Holder 1 x Wall Mounted Tool Panel KIT C INCLUDES: 2 x Power Tool Hanger (Small) 1 x Power Tool Hanger (Large) 2 x Double Hook with Curved Tip (Short) 1 x Double Hook with Curved Tip (Long) 4 x Single Hook with Curved Tip (Long) 6 x Single Hook with Curved Tip (Short) 2 x Heavy Duty Hooks 4 x Screwdriver & Plier Holder 4 x Curved Hook 1 x Screwdriver Holder 1 x Hex Key/Drill Bit Holder 1 x Wrench Holder 1 x Multi - Purpose Tray 1 x Cord Holder 2 x Wall Mounted Tool Panel www.teamsystems.net.au 109

Workbenches, Racks & Shelving 2 Tier Rack Workbench - Standard Standard Bench Length 2743mm Bench External Length 2920mm Bench Length Various Bench Height 920mm Bench Depth 609 & 838mm 2 Tier Longspan Workbench - Standard Bench Length 1000mm 1500mm 1800mm 2000mm 2400mm Bench External Length 1120mm 1620mm 1920mm 2120mm 2520mm Bench Height 1000mm Bench Depth 460, 605 & 910mm GLBMOB - Mobile Parts Trolley 4 Tier Longspan Workbench - Standard Bench Length 1000mm 1500mm 1800mm 2000mm 2400mm Bench External Length 1120mm 1620mm 1920mm 2120mm 2520mm Bench Height 1000mm Overall Height 2000mm Bench Depth 910mm with 460mm Top Shelves GLBMOB 1585H x 970W x 600D mm Handles 2 Fixed Castors 2 Swivel Castors Bin Quantity 2 Lockable A popular combination of bin sizes is 16 Grey; 32 Yellow; 32 Green; 12 Blue; 24 Red. However you can purchase as many or as little as needed of each type Plastic Louvre Panels Optional louvre panels sold separately. Also available in metal. Colour 1HO82 153 x 460mm White 1HO83 460 x 460mm White Metal Louvre Panels Optional louvre panels sold separately. Also available in metal. LV455 LV610 LV914 455 x 455mm 455 x 610mm 455 x 914mm 110 GENERAL EQUIPMENT

General Cleaning TSCB - Heavy Duty Porta-Boards Folds away for easy storage. TSCC - Heavy Duty Cones 3 Sided. Height Height TSCB - Cleaning 630mm TSCC - Cleaning 950mm (Small) / 1170mm (Large) TSCB - Wet Floor 630mm TSCC - Wet Floor 950mm (Small) / 1170mm (Large) B040 - Single Mopwringer Trolley YELLOW C006 - Multi-useful Cleaning Handcart Capacity B040 36 Litres C006 1140 x 508 x 972mm C007 - X Type Linen Cart BLUE C001 - Guest Room Service Cart C007 710 x 660 x 950mm C001 1480 x 550 x 1200mm www.teamsystems.net.au 111

General Cleaning Shopping Basket BLACK RED Superlux Matting Colour SBL-BLK 510 x 310 x 240mm Black SBL-RED 510 x 310 x 240mm Red Colour SUPLUX-BLK 18m x 1m Black SUPLUX-GRN 18m x 1m Green Square Plastic Dust Bin B042 - Cleaning Bucket YELLOW Colour B042 514 x 267 x 330mm B033 387 x 283 x 502mm Grey B034 368 x 270 x 379mm Grey B035 291 x 207 x 303mm Grey D0112C - Janitor Cart Includes Cover. D0112D - Janitor Cart Includes Cover. D0112C 100 x 600 x 510mm D0112C 1020 x 330 x 605mm 112 GENERAL EQUIPMENT

General Cleaning MGB80-80 Litre Wheelie Bin RED GREEN BLUE YELLOW MGB120-120 Litre Wheelie Bin RED GREEN BLUE YELLOW MGB240-240 Litre Wheelie Bin RED GREEN BLUE YELLOW B010A - Pedal Dustbin Capacity 68 Litre 495 x 431 x 654mm Tub & Dolly NATURAL B105 - Round Dust Bin Capacity - Diameter x Height 120 Litre 550 x 820mm - Diameter x Height IP015 - TUB 540 x 508mm IPO18 - TUB 540 x 610mm TS01518 - DOLLY - IPO16 - LID - www.teamsystems.net.au 113

Custom Made Trolleys TEAM SYSTEMS CAN MANUFACTURE TO SUIT YOUR INDIVIDUAL REQUIREMENTS Our large manufacturing workshop at our Victorian Head Office in Dandenong can cater to any custom made or specialised project your business may require. With most of our manufacturing employees working in our business for 5, 10 or more years, there is a great deal of pride in the quality and workmanship of our products. We are proud of our award winning designs throughout our local and national distribution system. All cutting, tube bending, punching, welding and assembly work is completed in-house under strict quality control procedures. We also have the ability to customise on medium and large size orders to suit your needs. SERVICE STATION DISPLAYS LAUNDRY & NURSERY TROLLEYS SPECIALISED STOCK PICKERS MEDICAL & EDUCATIONAL CATERING TROLLEYS 114 GENERAL EQUIPMENT