Contents Vol. 1 Part 1 ISO 1513:2010 Paints and varnishes Examination and preparation of test examples... 1 ISO 1514:2004 Paints and varnishes Standard panels for testing... 11 ISO 1516:2002 Determination of flash/no flash Closed cup equilibrium method... 35 ISO 1518-1:2011 Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method... 51 ISO 1518-2:2011 Paints and varnishes Determination of scratch resistance Part 2: Variable-loading method... 63 ISO 1519:2011 Paints and varnishes Bend test (cylindrical mandrel)... 77 ISO 1520:2006 Paints and varnishes Cupping test... 93 ISO 1522:2006 Paints and varnishes Pendulum damping test...107 ISO 1523:2002 Determination of flash point Closed cup equilibrium method...123 ISO 1524:2000 Paints and varnishes and printing inks Determination of fineness of grind...141 ISO 2409:2007 Paints and varnishes Cross-cut test...153 ISO 2431:2011 Paints and varnishes Determination of flow time by use of flow cups...169 ISO 2592:2000 Determination of flash and fire points Cleveland open cup method...191 ISO 2719:2002 Determination of flash point Pensky-Martens closed cup method...211 ISO 2808:2007 Paints and varnishes Determination of film thickness...239 ISO 2810:2004 Paints and varnishes Natural weathering of coatings Exposure and assessment...285 ISO 2811-1:2011 Part 1: Pyknometer method...301 1033
ISO 2811-2:2011 ISO 2811-3:2011 ISO 2811-4:2011 ISO 2812-1:2007 ISO 2812-2:2007 ISO 2812-3:2007 ISO 2812-4:2007 ISO 2812-5:2007 ISO 2813:1994 ISO 2813:1994 Part 2: Immersed body (plummet) method...317 Part 3: Oscillation method...331 Part 4: Pressure cup method...345 to liquids Part 1: Immersion in liquids other than water...359 to liquids Part 2: Water immersion method...371 to liquids Part 3: Method using an absorbent medium...381 to liquids Part 4: Spotting methods...393 to liquids Part 5: Temperature-gradient oven method... 405 Paints and varnishes Determination of specular gloss of non-metallic paint films at 20, 60 and 85...417 Paints and varnishes Determination of specular /Cor 1:1997 gloss of non-metallic paint films at 20, 60 and 85...429 ISO 2814:1973 Paints and varnishes Comparison of contrast ratio (hiding power) of paints of the same type and colour...431 ISO 2815:2003 Paints and varnishes Buchholz indentation test...435 ISO 2884-1:1999 Paints and varnishes Determination of viscosity using rotational viscometers Part 1: Cone-andplate viscometer operated at a high rate of shear...451 ISO 2884-2:2003 Paints and varnishes Determination of viscosity using rotary viscometers Part 2: Disc or ball viscometer operated at a specified speed...461 ISO 3231:1993 to humid atmospheres containing sulfur dioxide...473 ISO 3233:1998 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating...481 1034
ISO 3233:1998 /Cor 1:1999 ISO 3248:1998 ISO 3270:1984 ISO 3668:1998 ISO 3679:2004 ISO 3680:2004 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating...495 Paints and varnishes Determination of the effect of heat...497 Paints and varnishes and their raw materials Temperatures and humidities for conditioning and testing...505 Paints and varnishes Visual comparison of the colour of paints...509 Determination of flash point Rapid equilibrium closed cup method...521 Determination of flash/no flash Rapid equilibrium closed cup method...547 ISO 4618:2006 Paints and varnishes Terms and definitions...573 ISO 4623-1:2000 to filiform corrosion Part 1: Steel substrates...647 ISO 4623-2:2003 to filiform corrosion Part 2: Aluminium substrates...661 ISO 4623-2:2003 /Cor 1:2005 to filiform corrosion Part 2: Aluminium substrates...675 ISO 4624:2002 Paints and varnishes Pull-off test for adhesion...677 ISO 4628-1:2003 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system...695 ISO 4628-2:2003 Paints and varnishes Evaluation of degradation of Part 2: Assessment of degree of blistering...703 ISO 4628-3:2003 Paints and varnishes Evaluation of degradation of Part 3: Assessment of degree of rusting...721 ISO 4628-4:2003 Paints and varnishes Evaluation of degradation of Part 4: Assessment of degree of cracking...741 1035
ISO 4628-5:2003 Paints and varnishes Evaluation of degradation of Part 5: Assessment of degree of flaking...759 ISO 4628-6:2011 Paints and varnishes Evaluation of degradation of Part 6: Assessment of degree of chalking by tape method...769 ISO 4628-7:2003 Paints and varnishes Evaluation of degradation of Part 7: Assessment of degree of chalking by velvet method...779 ISO 4628-8:2005 Paints and varnishes Evaluation of degradation of Part 8: Assessment of degree of delamination and corrosion around a scribe...787 ISO 4628-10:2003 Paints and varnishes Evaluation of degradation of Part 10: Assessment of degree of filiform corrosion...801 ISO 6270-1:1998 to humidity Part 1: Continuous condensation...813 ISO 6270-2:2005 to humidity Part 2: Procedure for exposing test specimens in condensation-water atmospheres...823 ISO 6272-1:2011 Paints and varnishes Rapid-deformation (impact resistance) tests Part 1: Falling-weight test, large-area indenter...837 ISO 6272-2:2011 Paints and varnishes Rapid-deformation (impact resistance) tests Part 2: Falling-weight test, small-area indenter...849 ISO 6504-1:1983 Paints and varnishes Determination of hiding power Part 1: Kubelka-Munk method for white and light-coloured paints...859 1036
ISO 6504-3:2006 Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate...893 ISO 6860:2006 Paints and varnishes Bend test (conical mandrel)...907 ISO 7724-1:1984 Paints and varnishes Colorimetry Part 1: Principles...921 ISO 7724-2:1984 Paints and varnishes Colorimetry Part 2: Colour measurement...931 ISO 7724-3:1984 Paints and varnishes Colorimetry Part 3: Calculation of colour differences...941 ISO 7783:2011 Paints and varnishes Determination of watervapour transmission properties Cup method...949 ISO 7784-1:1997 to abrasion Part 1: Rotating abrasive-papercovered wheel method... 975 ISO 7784-2:1997 to abrasion Part 2: Rotating abrasive rubber wheel method... 989 ISO 7784-3:2000 to abrasion Part 3: Reciprocating test panel method... 1005 1037