Version 1.0 WIGGLES LOWBOY 3 DRAWER
Enjoy Your purchase from Australia s Best Value Furniture Store PAGE 2
Assembly checklist Read through the instructions carefully care before you y begin. g Make sure you have all the required tools. Never use power tools unless instructed. instr Identifyy and lay out all of the components compo before you begin assembly. t t d do d nott fully f ll tighten ti ht screws Unless instructed, until the item is fully assembled. Useful Information! Never use power tools unless specifically instructed. They can damage your components or hardware if used incorrectly.! The most common mistakes made during assembly are using the wrong hardware or getting components back to front.! Always use a soft surface (such as carpet or cardboard) when assembling your product to avoid scratching or damaging the surface of the product.! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be used in as they may not fit through a door once assembled.! Never use any glue until you are certain that the parts belong together.! Periodically check and re-tighten all fasteners. Check the product care label or website for product care instructions.! If you are having any difficulties assembling your product, missing any hardware or components please visit our website Help Centre for further assistance. PAGE 3
What you need to assemble the product DO NOT USE P4 Other tools you need P2 P8 P5 P8 P6 P1 P7 P15 P15 P15 P14 P14 P14 20 x Large Cam Bolts 20 x Large Cam Nuts 24 x Small Cam Bolts 24 x Small Cam Nuts 6 x Large Screws 6 x Medium Screws (H1) () (H3) (H4) (H5) (H6) 24 x Small Screws (H7) 3 x Left Slider (H13) 18 x Screws (H8) 3 x Right Slider (H14) 13 x Large Dowels () 12 x Small Dowels (H10) 3 x Left Slide Rail (H11) 3 x Right Slide Rail (H12) 6 x Plastic Hardwares (H15) PAGE 4
Step 1 H8 H12 18 x Screws (H8) 3 x Right Slide Rail (H12) H8 3 x Left Slide Rail (H11) H11 P2 P1 - Attach and fix 3 x Left Slide Rails (H11) to Panel (P1) using 9 x Screws(H8). - Attach and fix 3 x Right Slide Rails (H12) to Panel (P2) using 9 x Screws(H8). Step 2 H1 20 x Large Cam Bolts (H1) P2 P1 P4 - Screw 20 x Large Cam Bolts (H1) to Panels (P1),(P2),(P4) as shown. PAGE 5
Step 3 4 x Large Cam Nuts () 3 x Large Dowels () P4 This is how a cam nut works... The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. - Insert 3 x Large Dowels () into Panel (P4). - Attach and fix Panel (P4) to Panel (). - Insert 4 x Large Cam Nuts () into Panel (),make sure the arrow is pointing to the hole. -Turn the Large Cam Nut () 90 clockwise to tighten. Step 4 P1 8 x Large Cam Nuts () 5 x Large Dowels () P4 P7 P5 P6 P1 - Insert 5 x Large Dowels () into Panel (P1). - Attach and fix Panels ()&(P4),(P5),(P6),(P7) to Panel(P1). - Insert 8 x Large Cam Nuts () into Panels (),(P4),(P5),(P6),(P7), make sure the arrow is pointing to the hole. -Turn the Large Cam Nut () 90 clockwise to tighten. P5 PAGE 6
Step 5 8 x Large Cam Nuts () P2 5 x Large Dowels () P7 P4 P6 P8 P8 P5 - Insert 2 x Panels (P8) into grooves in Panels (P4),(P5),(P6). - Insert 5 x Large Dowels () into Panels (),(P4),(P6),(P7). - Attach and fix Panel (P2) to Panels (),(P4),(P5),(P6),(P7). - Insert 8 x Large Cam Nuts () into Panels (),(P4),(P5),(P6),(P7), make sure the arrow is pointing to the hole. -Turn the Large Cam Nut () 90 clockwise to tighten. Step 6 24 x Small Cam Bolts (H3) H3 H3 H3 - Screw 8 x Small Cam Bolts (H3) to Panels (),(),() as shown. PAGE 7
Step 7 12 x Small Cam Nuts 6 x Small Dowels (H10) (H4) H4 H10 - Insert 2 x Small Dowels (H10) into Panel (). - Attach Panels ()&() to Panel () as shown. - Insert 4 x Small Cam Nut (H4) into Panel (), make sure the arrow is pointing to the hole. - Turn the Small Cam Nut (H4) 90 clockwise to tighten. H10 H4 Step 8 P14 6 x Large Screws (H5) 6 x Medium Screws (H6) P15 H6 P14 - Attach Panel (P15) to Panel (P14) using 2 x Medium Screws (H6). - Attach Panels (P14)&(P15) to Panel () using 2 x Large Screws (H5). PAGE 8
Step 9 H10 H4 12 x Small Cam Nuts 6 x Small Dowels (H10) (H4) H10 H4 -Insert Panel () into Grooves in Panels ()&(). - Insert 2 x Small Dowels (H10) into Panel (). - Attach Panel () to Panels ()&(). - Insert 4 x Small Cam Nut (H4) into Panel () &() make sure the arrow is pointing to the hole. -Turn the Small Cam Nut (H4) 90 clockwise to tighten. Step 10 18 x Small Screws (H7) 3 x Left Slider (H13) H7 H13 H7 3 x Right Slider (H14) H14 - Attach and fix 1 x Left Slider (H13) to Panels () using 3 x Small Screws(H7). - Attach and fix 1 x Right Slider (H14) to Panels () using 3 x Small Screws(H7). PAGE 9
Step 11 H15 H7 6 x Plastic Hardwares (H15) 6 x Small Screws (H7) H15 H7 -Screw 2 x Plastic Hardwares (H15) to Panels ()&() using 2 x Small Screws (H7) on drawer bottom as shown. Step 12 H13 -Slide 3 drawers into Lowboy. PAGE 10
Step 13 Job Complete! In the interest of our environment please dispose of all packaging thoughtfully. PAGE 11