narrow bookcase espresso style # canarrbkes dpci # 249-4-0039 ebony style # canarrbkeb dpci # 249-4-004 cherry style # canarrbkmt dpci # 249-4-0366 chestnut style # canarrbkch dpci # 249-4-0359 white style # canarrbkwh dpci # 249-4-0363 midtone cherry style # canarrbkmt dpci # 249-4-0366 >> assembly instructions
Congratulations on your latest Target purchase. Now what? Don t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you ll be on your way to transforming your room in no time. Good luck though we re confident you won t need it. Before you begin. Check for damaged or missing parts. Call -855-MYTGTHME (855-698-4846) for service. 2. Use the carton as a working surface to prevent product damage during assembly. 3. Gather all tools prior to assembly. tools needed 2
Table of Contents Introduction 2 Hardware Parts list 4 5 How to use the cam lock system 6 Assembly 7-3 QUESTINS? Just call -855-MYTGTHME (855-698-4846) for service. For faster service, have the style number and DPCI number ready when calling. 3
hardware (H) x 27 cam (H2) x 2 shelf support (H3) x wall anchor (H4) x 27 cam bolt (H5) x 20 wooden dowel (H6) x 27 short pan-head screw (H7) x 4 small flat-head screw (H8) x 38mm wa;; screw (H9) x strap (H0) x 5mm pan-head screw (H) x 2 5/8 washer 4
ITEM DESCRIPTIN QUANTITY Z Y X R Q P M L K F E D Top panel Left side panel Right side panel Back panel Bottom panel Middle fixed shelf Adjustable shelves Bottom front stretcher Adjustable shelf stretchers Middle front fixed stretcher Decorative molding Top front stretcher Middle back fixed stretcher 3 3 Y F L Z E R K P D L L M Q X 5
how to use the cam lock system. 2. 3. 80º 4. 5. 6. 6
step. D M P Q E P D K K Q (H) x cam (H5) x 9 wooden dowel (H4) x cam bolt Y M. Carefully tap wooden dowels into place. Leave /2 of the dowels sticking out. 2. Screw-In cam bolts must be screwed down flush with wood panel. 3. Refer to page 6 for instructions on how to use the cam lock system. 7
step 2. X (H) x 5 cam (H5) x 6 wooden dowel (H4) x 5 cam bolt. Carefully tap wooden dowels into place. Leave /2 of the dowels sticking out. 2. Screw-In cam bolts must be screwed down flush with wood panel. 3. Refer to page 6 for instructions on how to use the cam lock system. 8
step 3. F (H7) x 4 small flat-head screw. Do not over tighten screws. 9
step 4. Z (H) x 5 cam (H5) x 2 wooden dowel (H4) x 5 cam bolt. Carefully tap small wooden dowels into place. Leave /2 of the dowels sticking out. 2. Screw-In cam bolts must be screwed down flush with wood panel. 3. Refer to page 6 for instructions on how to use the cam lock system. 0
! WARNING Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tipover: step 5. screw hole for tip kit (H6) x 27 short pan-head screw. Do not over tighten screws. Place the back panel evenly Make sure the screws go through the pre-drilled holes properly Tighten the remaining screws. R - Install tip-over restraint provided. - Place heavy items on lower shelves and as far back as possible. - Place heaviest items in the lowest drawers. - Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product. - Never allow children to climb or hang on drawers, doors, or shelves. - Never open more than one drawer at a time. (R) - Do not defeat or remove the drawer interlock system. This is a permanent label. Do not remove. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
step 6. L x3 (H) x 6 cam (H5) x 3 wooden dowel (H4) x 6 cam bolt (H2) x 2 shelf support. Attach parts L to parts. Refer to page 6 for instructions on how to use the cam lock system. 2. Insert shelf supports into desired hole. Different holes accommodate different shelf heights 3. Angle shelves to fit between the rails and set on top of shelf supports. 2
over: step 7. (H3) x wall anchor (H) (H9) (H0) (H8) x 38mm wall screw (H9) x strap Position against wall Mark position of strap hole on wall Drill /4 hole Tap in wall anchor Fasten anti-tip strap (H0) x (H) x 2 5mm pan-head screw 5/8 washer (H3) (H8) (H) 3! WARNING - Install tip-over restraint provided. - Place heavy items on lower shelves and as far back as possible. - Place heaviest items in the lowest drawers. - Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product. - Never allow children to climb or hang on drawers, doors, or shelves. - Never open more than one drawer at a time. (R) - Do not defeat or remove the drawer interlock system. This is a permanent label. Do not remove. Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip- Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
! WARNING Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tipover: - Install tip-over restraint provided. - Place heavy items on lower shelves and as far back as possible. - Place heaviest items in the lowest drawers. - Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product. - Never allow children to climb or hang on drawers, doors, or shelves. - Never open more than one drawer at a time. (R) - Do not defeat or remove the drawer interlock system. Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over. This is a permanent label. Do not remove. 65 lbs. per shelf. This unit has been designed for the weight shown. Exceeding this recommended weight could result in excessive sagging of the top. Extreme overloading can cause failure of the top and possible injury. 2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed. QUESTINS? Just call -855-MYTGTHME (855-698-4846) for service. For faster service, have the style number and DPCI number ready when calling. 4
204 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.