SOLENOI VLVES pilot operated, spool type single/dual solenoid (mono/bistable function) aluminium body, NMUR style, / - / 0 / / Series - FETURES The monostable spool valves in conformity with IE 08 Standard (00 route H version) have TÜV ( series) and EXI (- series) certified with integrity levels: SIL for HFT = 0 / SIL for HFT = The spool valves have threaded port connections and "NMUR" style interface The same spool valve can be adapted for / N or / functions for controlling double-acting and single-acting actuators ll the exhaust ports of the spool valve are connectable, providing better environmental protection. Particularly recommended for sensitive areas, such as clean rooms, and applications in the pharmaceutical and food processing sectors The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter (environmentally-protected construction) Ultra low level for inside application, suitable to connect to process fieldbus remote I/O or valve couplers The solenoid valves satisfy all relevant EU directives GENERL ifferential pressure Flow (Qv at bar) (a) - 0, bar [ bar =00 kpa] / = 700 l/min (NR) / = 000 l/min fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered - to +0 (a) - to +0 NR (nitrile) + PUR (polyurethane) With series 0 pilots, prefixes FS/FVT/FSIS/FSZN. MTERILS IN ONTT WITH FLUI ( ) Ensure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodised End cover (spring return) Glass-filled P Interface plates Glass fibre filled P Spool valve internal parts Zamak, stainless steel, POM, aluminium Pilot internal parts Size 0 (E0.0.80), refer to specific catalogue pages: /LPKF (contact us) - 9 (LIS) Pilots Size (E0..0N), refer to specific catalogue pages: 0 (FS/FVT/FSIS/FSZN) - 0 piezotronic (PIS-PISIS) Pilot end covers luminium UP (FS prefix) (FS prefix) LP 0,00W - 0,W 0,W -,W RP - MP P Not available 0,W -,W Ultra Low Low Reduced and Medium asic SPEIFITIONS pipe size orifice size flow coefficient Kv operating pressure differential (bar) min.. level prefix optional solenoids max. (PS) TEX / IEEx IP air ( ) Ex db Ex ia Ex n NOMO size 0 basic catalogue number ( ) (mm) (m /h) (l/min) ~ = ~/= () LIS FSIS PISIS FSZN FS PIS / N - / - Solenoid air pilot operated - spring return (monostable) / 0, 0 0 0 LP - - - - m - - 0 () / 0, 0-8 LP - - m - - - - - 0 () / 0, 0 0 0 P - - - - - - 0 () - / 0, 0-8 LP - m - - - - - 0 () - / 0, 0 8 8 UP - - - m - - - 0 () /,9, 0 0 LP - - - - m - - 0 () /,9, - 8 LP - - m - - - - - 0 () /,9, 0 0 P - - - - - - 0 () - /,9, - 8 LP - m - - - - - 0 () - /,9, 8 8 UP - - - m - - - 0 () Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature vailable feature in only. - Not available () /LPKF: ontact us () ertified IE 08 Functional Safety data, use suffix "SL". POWER LEVELS - cold electrical holding values (watt) NOMO size ll leaflets are available on: www.asco.com Process Industry - 800G-08/R0
SPEIFITIONS pipe size orifice size flow coefficient Kv operating pressure differential (bar) min.. level prefix optional solenoids max. (PS) TEX / IEEx IP air ( ) Ex db Ex ia Ex n NOMO size 0 SERIES - basic catalogue number ( ) (mm) (m /h) (l/min) ~ = ~/= () LIS FSIS PISIS FSZN FS PIS / N - / - Solenoid air pilot operated and return (bistable) / 0, 0 0 0 LP - - - - m - - 0 / 0, 0-8 LP - - m - - - - - 0 / 0, 0 0 0 P - - - - - - 0 - / 0, 0-8 LP - m - - - - - 0 - / 0, 0 8 8 UP - - - m - - - 0 /,9, 0 0 LP - - - - m - - 0 /,9, - 8 LP - - m - - - - - 0 /,9, 0 0 P - - - - - - 0 - /,9, - 8 LP - m - - - - - 0 - /,9, 8 8 UP - - - m - - - 0 Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature vailable feature in only. - Not available NOMO size PREFIX TLE prefix level description 7 8 UP LP RP P NOMO solenoid (pilot) interface size 0 L I S Intrinsically safe - 9 pilot (EN/IE 0079-)* - m - - () Flameproof - luminium - /LPKF pilot (EN/IE 0079-, 0079-)* - - - NOMO solenoid (pilot) interface size F S Solenoid + spade plug MP,x0,, 9, mm, (EN 070), 0 pilot - - - F V T Solenoid with M connection, LE + protection (EN 070), 0 pilot - m - - F S I S Intrinsically safe, 9, mm, pilot 0; TEX (EN/IE 0079-, -)* - m - - F S Z N Non sparking, connector 9, mm cable m, pilot 0 (EN 0079-, -) * - m - - P I S Solenoid with spade plug connector (EN 070), 0 piezotronic pilot - - - P I S I S Intrinsically safe, piezotronic 0 pilot, TEX (EN/IE 0079-, -) * m - - - SUFFIX TLE suffix level description 7 8 UP LP RP P NOMO solenoid (pilot) interface size 0 M S Screw type manual operator () () - - - M Exhaust reducer (series only) m - S L ertified IE 08 Functional Safety data () - m - NOMO solenoid (pilot) interface size M S Screw type manual operator () - - - M O Push type manual operator / / - - M Exhaust reducer (series only) / - S L ertified IE 08 Functional Safety data () / / - - PROUT SELETION GUIE STEP Select basic catalogue number, including pipe thread indentification letter. Refer to the specifications table on page: or Example: G0 STEP Select prefix (combination). Refer to the specifications table and the prefix table, respect the indicated level. Example: FS STEP Select suffix. Refer to the suffix table, respect the indicated level. Suffix MO mandatory for the pilot 0 (FSIS/FSIS/FVTIS/ FSZN/FVTZN). Example: MO STEP Selection of TPL is mandatory for the 0 pilot (PISIS), HV ( mw) and HV ( mw). dd "X" between the prefix "PISIS" and the basic catalogue number. STEP Select voltage. Refer to standard voltages on page: Example: 0V / 0Hz STEP Final catalogue / ordering number Example: FSG0MO 0 V / 0 Hz OPTIONS & ESSORIES series pipe size exhaust protector (stainless steel) (G) (NPT) (M) /8 008 () 008 () - / 0079 () 008 () - / M - - 008 () vailable feature vailable feature in only - Not available * TEX/IEEx valves using these solenoids are approved according to EN - (non electrical) () /LPK: ontact us () Not to use with SL suffix () Not to use with LIS prefix () Not to use with MS suffix () Provided with "SL" suffix ll leaflets are available on: www.asco.com - Process Industry ORERING EXMPLES VLVES: LIS G 0..V / FS G 0 0V / 0 Hz FS 8 0 MO 0V / 0 Hz FS G 0 SLMO 0V / 0 Hz FVTZN G 0 V / PISIS G 0 MO V / PISIS G 0 SLMO V / PISIS X G 0 MO TPL0 HV / prefix voltage pipe thread TPL basic number suffix 800G-08/R0
SERIES - EXPLNTION OF TEMPERTURE RNGES OF SOLENOI VLVES Valve temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) Operator ambient temperature range The operator ambient temperature range is determined by the selected level and the safety code Total temperature range The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above ELETRIL HRTERISTIS oil insulation class F Electrical safety IE Standard voltages (=) (8) : V - 8V ; FS/FSZN/FVT: V FSIS: V - V ; LIS:..V, PIS: V to 70V ; PISIS: V, 8V, V, V (~) (8) : V - 8V - V - 0V/0Hz ; FS: V - V - 0V/0Hz ; PIS: V to 70V - other voltages and 0Hz are available on request ratings operator electrical ambient replacement coil prefix inrush holding hot/cold temperature enclosure safety code option ~ ~ = range (TS) protection ~ = (V) (V) (W) (W) ( ) (EN 09) - - type () asic (P) (8) 8,, 7, /7, - to +80 IIG Ex db II+H Gb T, II Ex tb III b IP/7, alu. - - 0 Low Power (LP) FS,,, /, - to +0 EN 070 IP, moulded - - 0 FS, (7), (7), (7) - - to +0 EN 070 IP, moulded - - 0 FVT () - - -,/, - to +0 EN 070 IP, moulded - - 0 FSZN - - - /, - to +0//0 II G Ex n II T/T/T Gc, II Ex tc III c IP, moulded - - 0 FSIS ()() - - - 0, -0 to +0/0 II G Ex ia II T/T Ga, II Ex ia III a IP, moulded - - 07 LIS ()() - - - 0, -0 to + II G Ex ia II T Ga, II Ex ib III b () IP, moulded - - 0 Ultra low (UP) PIS - - - 0,007 0 to +0 - IP, moulded - - 0 PISIS ()() V - - - 0,00-0 to +0 II G Ex ia II T Ga, II Ex ia III a IP, moulded - - 0 PISIS ()() 8V - - - 0,0-0 to +0 II G Ex ia II T Ga, II Ex ia III a IP, moulded - - 0 PISIS ()() LV - - - 0,0-0 to +0 II G Ex ia II T Ga, II Ex ia III a IP, moulded - - 0 PISIS ()() HV - - - 0,0-0 to +0 II G Ex ia II T Ga, II Ex ia III a IP, moulded - - 0 PISIS ()() LV - - - 0,0-0 to +0 II G Ex ia II T Ga, II Ex ia III a IP, moulded - - 0 PISIS ()() HV - - - 0, -0 to +0 II G Ex ia II T Ga, II Ex ia III a IP, moulded - - 0 () Piezotronic standard voltages: PIS prefix, V to 70 V /, peak current max.: 80 m, holding current max.: m PISIS prefix: V / mw 8 V / mw L V / mw H V / mw L V / mw H V / mw Turn ON voltage U ON.. 9 V 7,.. V 0,8.. V 0,8.. V,.. 8 V,.. 8 V Turn OFF voltage U OFF V, V, V, V V V Peak current m 0 m,8 m 8, m 0 m m Holding current 0, m,8 m m,7 m,9 m, m able + max. barrier resistances (R S + R ) 00 Ω max. 00 Ω max. 00 Ω max. 70 Ω max. 00 Ω max. 70 Ω max. () safety parameters Refer to the dimensional drawings on pages: to 7 () prefix Min. operating current (I(ON) min.): 0,0 / U (ON) min. =,8 V (For use in zone 0 locations, see the installation conditions given in the I&M instructions) option U I = () I I P I L I I (V) (m) (W) (H) (µf) Low Power (LP) FSIS 8 00, 0 0 LIS 0 00, 0 0 Ultra low (UP) PISIS 0 00 0,9 0 0 () Intrinsically safe pilots: heck the electrical characteristics in the corresponding catalogue pages (FSIS/LIS/PISIS: 0/9000/0 pilots). () FSIS (0 pilots): V: I (ON) min., with LE = m; U (ON) min.=,9 V; U (max.) recommended = V; U (OFF) =, V; I (OFF) = 0 m V: I (ON) min., with LE = m; U (ON) min.=, V; U (max.) recommended = 8 V; U (OFF) =,7 V; I (OFF) = 7 m () Values for LE + protection. (7) : 0V (8) /LPK: ontact us - Not available ELETRIL ONNETIONS prefix connection (8) /" NPT threaded cable entry. Enclosures are supplied without cable gland LIS Spade plug connector with cable gland EN70-80 (ISO 00) for cables with an outer diameter from to 8 mm FS, FSIS, PIS, PISIS Spade plug connector with cable gland IN 0, 9, mm, form, for cables with an outer diameter from to mm FSZN Spade plug connector, IN 0, 9, mm, form, pre-wired connector length m FVT M connection for M connector FL Moulded-in flying lead, standard length 0, m ll leaflets are available on: www.asco.com Process Industry - 800G-08/R0
SERIES - ITIONL OPTIONS TPL numbers: TPL 0: Piezotronic, PISIS prefix, HV ( mw) TPL 0: Piezotronic, PISIS prefix, HV ( mw) TPL numbers: TPL 07:LE and protection, FS prefix, only available in V / and V - dd 0, W () and 0, W/V () Other pipe threads are available on request Set of stainless steel mounting screws (series ), catalogue number: 9780 Set of two G /8 exhaust reducers (series ), catalogue number: 8800 INSTLLTION Multi language installation/maintenance instructions are included with each valve The valves can be mounted in any position without affecting operation / N-/ spool valve supplied with one or two interface plates with NMUR mating surfaces. epending on function (/ N or /), position the plate (series ) or one of the two plates (series ) on the spool valve body before installing on actuator It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) owel pin (if necessary), bolts and gaskets are standard supplied Threaded pipe connection identifier is 8 = NPT (NSI.0.); G = G (ISO 8/) Valves with suffix "SL" are provided with specific exhaust protectors IMENSIONS (mm), WEIGHT (kg) Series Series Types: 0-0 Types: 0.. 07 Types : 0.. 07 E E I P 0 Q E x V, 07 8 x / x /8 7 0 9 8 9 9 - ( x /8) ( x /) E 9 = = = = F G 70,7 0, 89 9 7 7, 9, 9, I P Q V 9,,,8 / Interface plate mounting holes:, mm dia. (Spotfacing: 9 mm dia., depth mm) One mm dia. hole for dowel pin ( Series) - in position : / N function plate - in position : / function plate O-ring seals (supplied) E Exhaust reducers G /8 (series ) or protectors adaptable on orifices and F mounting holes:, mm dia. (Spotfacing: mm dia., depth mm) G dia., mm hole for dowel pin (series ). Same position for interface plate / N or / ll leaflets are available on: www.asco.com - Process Industry 800G-08/R0
SERIES - IMENSIONS (mm), WEIGHT (kg) TYPE 0: pilot/lpkf operator EN/IE 0079-, 0079- TYPE 0: luminium 9/LIS: EN 0079- /: ontact us 0 / 0 0 / 0 /8 NPT / NPT 0 M 0 c 0 98 8, TYPE 0: Polyarylamide 0 pilot FS: IE / IN 0 0 / 0 0MS / 0MO / 0MS / 0MO 0 / 0MS / 0MO / 0 / 0MS / 0MO 0 7 M M 90 9 TYPE 0: Polyarylamide 0 pilot FVT: IE / M connection + LE and protection 0 / 0 0MS / 0MO / 0MS / 0MO 0 / 0MS / 0MO / 0 / 0MS / 0MO 9, M 79 7 M ll leaflets are available on: www.asco.com 800G-08/R0 Process Industry -
80 SERIES - IMENSIONS (mm), WEIGHT (kg) TYPE 0: Polyamide Piezotronic pilot PIS: IE / IN 0 PISIS: EN/IE 0079-, 0079-0MO / 0MO 0MO / 0MO 0 7 M 90 9 M TYPE 0: Polyarylamide 0 pilot FSZN: EN 0079-, 0079-0MO / 0MO 0MO / 0MO 80 0 7 80 80 M M 90 9 TYPE 07: Polyarylamide 0 pilot FSIS: EN/IE 0079-, 0079-0MO / 0MO 0MO / 0MO 9 M 90 9 ll leaflets are available on: www.asco.com M 800G-08/R0 - Process Industry
SERIES - IMENSIONS (mm), WEIGHT (kg) Ex d certified cable gland (on request) Three-core cable, length m onnector rotatable by 90 increments, cable Ø - mm onnector rotatable by 90 increments, cable Ø - 8 mm Screw type manual operator, suffix MS Push type manual operator, suffix MO onnectable pilot exhaust port weight () E type prefix/option level monostable bistable / 0 () P 79 7 7 8,7 7 9,7,9,0,9,,0,9 0 LIS LP 8,, 7, - - 0,9, 0,80, 0 FS LP -, - 89-99, - 7, - - 0,,00 0,8,08 0 FVT LP -, - 89-90, - 7, - - 0,,0 0,8, 0 PIS / PISIS UP -, - 89-99, - 7, - - 0,,00 0,,08 0 FSZN LP -, - 89-99, - 7, - - 0,,08 0,, 07 FSIS LP -, - 89-00, - 7, - - 0,,0 0,, () Incl. coil(s) and connector(s). () /LPK: ontact us ESSORIES Ø Ø M /8 / /8 /, - exhaust protector (stainless steel) ll leaflets are available on: www.asco.com 800G-08/R0 Process Industry - 7
SERIES - ll leaflets are available on: www.asco.com 8 - Process Industry vailability, design and specifications are subject to change without notice. ll rights reserved. 800G-08/R0