T1B-20-60W series Feature: Universal Input range from 100V-240V.(Optional 277V for North American). Constant current output for hight power LED light. Low output ripple current, Reliable :Short-Circuit / Over Load / Over Heat and Auto-recovery Mode Using long-life parts, can be used continuously for 2-year and interval of 5 years. Ensure the LED life beyond 2 years. Safety isolated high-voltage,output extra-low safety voltage (SELV). Good electromagnetic compatibility (EMC) characteristics, meet the U.S. FCC; EU EN55015; Germany VDE 0871 Class B standard. Soft-start function, very few no-load loss. Meet the CEC and Energy Star 2.0 standard. 2 years warranty RoHS Compliant Application: Specification: Model No. T1B-30W32C0900 T1B-60W32C1700 Voltage Range (VAC) 100 Vac - 240 Vac (Optional 277V) Frequency Range (Hz) 50 Hz / 60 Hz AC Current (full load) 0.4A@115VAC / 0.65A@115VAC / Primary Inrush Current (cold start) 0.35@230VAC max. 15A@230VAC max. 15A@230VAC max.. Secondary Environment Power factor 0.92 @230VAC Voltage Range (VDC) 27-35Vdc 27-35Vdc Rated Current Range (ma) 400-900mA ± 3% 1000-1700mA ± 3% Rated Power (W) 35W Max 60 W Max Numbers of LEDs 9-10pcs x 3W 9-10pcs x 6W Efficiency (Typ.) 87% 87% Ripple Current / Overtemperature Shutdown, Automatic restart after cooling down Short Circuit Belch output Open Circuit Input wattage<1.5w Overvoltage Shutdown, Automatic restart Operating Temp. -20 C~45 C full load. Operating Humidity 20% ~ 95% RH non-condensing. Storage Temp. / Humidity -20 ~ +80 C / 10% ~ 95% RH Add: 深圳市福永镇大洋开发区福安路盈豪盛工业园巨能光电 (518103) 1 of 2
T1B-20-60W series Safety Standards and Compatibility Other Ambient Temp. Safety Standards withstand voltage Insulation impedance interference Harmonic current Immunity Mean-Time Between Failure(MTBF) Dimension 25 C at 240Vac UL, cul 1310 Class 2 TUV / CE-EN61347-1,EN61347-2-13 I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25 /70%RH According EN55015,EN55022(CISPR22) Class B According EN61000-3-2 Class C( 50% load);en61000-3-3 According EN61000-4-2,3,4,5,6,8,11;EN61547(surge 2KV) 30Khrs MIL-HDBK-217F(25 ) Weight Mechanical Dimension: 160Lx80Wx40H mm Wiring Diagram: Note 1: Lamps must be wired in series, and total value of Vf should be under rated DC Voltage. The constant-current LED drive, power supply in constant current mode (CC), the output voltage is equal to its drive LED strings of the LED forward voltage drop. In order to the power supply has the best power factor and efficiency is generally recommended, the LED string forward voltage drop of 95% to 75% of the rated output voltage of the power. Note 2: Disconnect the mains supply before installing, Do not turn on/off from output port. Note 3: Parameter measured at full load 25 C ambien t termporature. Note 4: Two years warranty Add: 深圳市福永镇大洋开发区福安路盈豪盛工业园巨能光电 (518103) 2 of 2
P1A-50W series Feature: Universal Input range from 100V-240V.(Optional 277V for North American). Constant current output for hight power LED light. Low output ripple current, Reliable :Short-Circuit / Over Load / Over Heat and Auto-recovery Mode Using long-life parts, can be used continuously for 2-year and interval of 5 years. Ensure the LED life beyond 2 years. Safety isolated high-voltage,output extra-low safety voltage (SELV). Good electromagnetic compatibility (EMC) characteristics, meet the U.S. FCC; EU EN55015; Germany VDE 0871 Class B standard. Soft-start function, very few no-load loss. Meet the CEC and Energy Star 2.0 standard. 2 years warranty RoHS Compliant Application: Specification: Model No. P1A-50W27C1550 P1A-50W36C1200 P1A-50W48C0850 Voltage Range (VAC) 100 Vac - 240 Vac (Optional 277V) Frequency Range (Hz) 50 Hz / 60 Hz AC Current (full load) 0.4A@115VAC / 0.4A@115VAC / 0.4A@115VAC / Primary Inrush Current (cold start) 15A@230VAC max. 15A@230VAC max.. 15A@230VAC max. Secondary Environment Power factor 0.92 @230VAC Voltage Range (VDC) 18-27Vdc 27V-36V 36V-48V Rated Current Range (ma) 1550mA ± 2% 1200mA± 2% 850 ma± 2% Rated Power (W) / / / Numbers of LEDs 5-8pcs x 5W 9-12pcs x 4W 12-16pcs x 3W Efficiency (Typ.) 86% 86% 86% Ripple Current / Overtemperature Shutdown, Automatic restart after cooling down Short Circuit Belch output Open Circuit Input wattage<1.1w Overvoltage Shutdown, Automatic restart Operating Temp. -20 C~45 C full load. Operating Humidity 20% ~ 95% RH non-condensing. Storage Temp. / Humidity -20 ~ +80 C / 10% ~ 95% RH Add: 深圳市福永镇大洋开发区福安路盈豪盛工业园巨能光电 (518103) 1 of 2
P1A-50W series Safety Standards and Compatibility Other Ambient Temp. Safety Standards withstand voltage Insulation impedance interference Harmonic current Immunity Mean-Time Between Failure(MTBF) Dimension 25 C at 240Vac UL, cul 1310 Class 2 TUV / CE-EN61347-1,EN61347-2-13 I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25 /70%RH According EN55015,EN55022(CISPR22) Class B According EN61000-3-2 Class C( 50% load);en61000-3-3 According EN61000-4-2,3,4,5,6,8,11;EN61547(surge 2KV) 30Khrs MIL-HDBK-217F(25 ) Weight Mechanical Dimension: 147Lx45Wx34H mm Wiring Diagram: Note 1: Lamps must be wired in series, and total value of Vf should be under rated DC Voltage. The constant-current LED drive, power supply in constant current mode (CC), the output voltage is equal to its drive LED strings of the LED forward voltage drop. In order to the power supply has the best power factor and efficiency is generally recommended, the LED string forward voltage drop of 95% to 75% of the rated output voltage of the power. Note 2: Disconnect the mains supply before installing, Do not turn on/off from output port. Note 3: Parameter measured at full load 25 C ambien t termporature. Note 4: Two years warranty Add: 深圳市福永镇大洋开发区福安路盈豪盛工业园巨能光电 (518103) 2 of 2
N1A-70W27C2300 series Feature: Universal Input range from 100V-240V.(Optional 277V for North American). Constant current output for hight power LED light. Low output ripple current, Reliable :Short-Circuit / Over Load / Over Heat and Auto-recovery Mode Using long-life parts, can be used continuously for 2-year and interval of 5 years. Ensure the LED life beyond 2 years. Safety isolated high-voltage,output extra-low safety voltage (SELV). Good electromagnetic compatibility (EMC) characteristics, meet the U.S. FCC; EU EN55015; Germany VDE 0871 Class B standard. Soft-start function, very few no-load loss. Meet the CEC and Energy Star 2.0 standard. 2 years warranty RoHS Compliant Application: Specification: Model No. N1A-70W27C2200 Voltage Range (VAC) 100 Vac - 240 Vac (Optional 277V) Frequency Range (Hz) 50 Hz / 60 Hz AC Current (full load) 0.8A@115VAC / Primary Inrush Current (cold start) 0.4@230VAC max. 15A@230VAC max.. Secondary Environment Safety Power factor 0.92 @230VAC Voltage Range (VDC) 16-27Vdc Rated Current Range (ma) 2300mA ± 3% Rated Power (W) 60W Max Numbers of LEDs 5-8pcs x 5W Efficiency (Typ.) 86% Ripple Current / Overtemperature Shutdown, Automatic restart after cooling down Short Circuit Belch output Open Circuit Input wattage<1.5w Overvoltage Shutdown, Automatic restart Operating Temp. -20 C~45 C full load. Operating Humidity 20% ~ 95% RH non-condensing. Storage Temp. / Humidity -20 ~ +80 C / 10% ~ 95% RH Ambient Temp. 25 C at 240Vac Safety Standards UL, cul 1310 Class 2 TUV / CE-EN61347-1,EN61347-2-13 Add: 深圳市福永镇大洋开发区福安路盈豪盛工业园巨能光电 (518103) 1 of 2
N1A-70W27C2300 series Standards and Compatibility Other withstand voltage Insulation impedance interference Harmonic current Immunity Mean-Time Between Failure(MTBF) Dimension I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC I/P-O/P,I/P-FG,O/P-FG:100M Ohms/500VDC/25 /70%RH According EN55015,EN55022(CISPR22) Class B According EN61000-3-2 Class C( 50% load);en61000-3-3 According EN61000-4-2,3,4,5,6,8,11;EN61547(surge 2KV) 30Khrs MIL-HDBK-217F(25 ) Weight Mechanical Dimension: 164Lx63Wx40H mm Wiring Diagram: Note 1: Lamps must be wired in series, and total value of Vf should be under rated DC Voltage. The constant-current LED drive, power supply in constant current mode (CC), the output voltage is equal to its drive LED strings of the LED forward voltage drop. In order to the power supply has the best power factor and efficiency is generally recommended, the LED string forward voltage drop of 95% to 75% of the rated output voltage of the power. Note 2: Disconnect the mains supply before installing, Do not turn on/off from output port. Note 3: Parameter measured at full load 25 C ambien t termporature. Note 4: Two years warranty Add: 深圳市福永镇大洋开发区福安路盈豪盛工业园巨能光电 (518103) 2 of 2