Technical introduction to TetraFlex 1
TetraFlex Dispatcher User Application API Intelligent Distributed Architecture Voice & Data Logging Packet Data Gateway TetraFlex Outdoor Base Station Voice Gateway Network Management TetraFlex Indoor Base Station
Intelligent Distributed Architecture (benefits) Intelligent distributed Architecture no single point of failure! Enables simple self-configuration during site expansion Extremely fast upgrade of new software versions of all base stations < 5 minuets Automatic re-establishment after network interruption Distributed TETRA Switches including all Network-information, hereunder: Routing information Complete data of: Subscribers, Network configuration etc.
TetraFlex Outdoor Base Station 1-4 carrier (Transceivers) Designed to be mounted in the top of the mast Eliminating feeder loss Small size & low weight Low installation costs Low power consumption (75 W)
Out-door Base Station TX output power 10 W typ. (antenna connector) RX sensitivity -121 dbm (diversity) Tower, roof or ground mounted outdoor unit Integrated duplex filter Full RX/TX operation on one antenna Dual receiver diversity on two antennas Dual carrier configuration and dual receiver diversity on two antennas Power -48 V DC Power consumption 75W 10/100Mbit/s Ethernet interface (incl. Voice over IP) Operating temperature -25 to +55 Celsius IP65 encapsulation GPS receiver synchronisation ETSI/TETRA SAR Compliant R&TTE approved Dimensions 333 x 246 x 165 mm Weight 9 KGs
TetraFlex Indoor Base Station 1-16 carrier Designed for Indoor mounting Tower Mounted Amplifier 4, 8 or 16 Carriers 64 Time Slots 19 Rack construction Low Power consumption.
In-door Base Stations Available in 4, 8 and 16 carrier versions TX output power 10 W typ. (antenna connector) RX sensitivity -120 dbm (diversity) Optional Redundant Base Station Controller (BSC) Dual Receiver Diversity GPS receiver synchronisation Cavity or Hybrid Combiner System Tower Mounted Duplexer and Amplifier Power -48 V DC or 100-240 V AC Power consumption 512W (typ) for DC input Operating temperature range -20 to +55 Celsius IP20 classification ETSI/TETRA compliance SAR Compliant R&TTE approved Dimensions 1054 x 542 x 520 mm and 1721 x 542 x 520
TetraFlex Dispatcher Integrated phonebook Display and monitoring of all active calls DGNA Individual calls Group calls Send and receive SDS Positioning of mobile units
Voice & Data Logging Complete Voice logging and replay across the entire network Logging of SDS Statistics on operational Level for operational Network performance and incident replay
Network Management Provides easy access to configuration and surveillance of your network and subscribers Simplified configuration of all possible parameters (windows based) Alarm surveillance of the entire network SNMP Support for external Management systems connectivity Alarms to be displayed over Google Map
Voice Gateway The TetraFlex Voice Gateway performs connectivity to voice communication via external PBX/Gatekeeper SIP protocol (QSIG and ISDN) Possibility for establishment of numbering plan according to existing user-numbers
Packet Data Gateway The TetraFlex Packet Data Gateway supports IP communication between TETRA mobiles and attached units (1 to 4 Timeslots Dynamic) Single Slot Packet Data Multi Slot Packet Data Connection to: Laptop Application Server Workstation FTP server WAP server
User Application API TetraFlex Application Programming Interface allows software development and connectivity for 3 rd party applications: Development of special Alarm applications AVL applications Dispatcher Positioning applications