Programmable Active Crystal Filters Catalog www.fiplex.com
AERONAUTICAL BAND PROGRAMMABLE ACTIVE CRYSTAL FILTER* 118-137 MHz ACFA1-25 Crystal filter based filtering system, 25 KHz BW Software programmable tuning, 1.25 KHz steps Sharp filtering response Front end LNA included for low noise figure User adjustable gain High linearity Transmitter Bypass (TXBP) Module as optional N(f) to SMA(m) jumpers included, 1 ft, 2 pcs Programmable Active Crystal Filter (US Patent Protected) DOC TW050.02 01122014 Fiplex is a registered trademark of Fiplex Communications, Inc. Fiplex Communications, Inc. reserves the right to change specifications without prior notice. Air-to-Ground and Ground Communications Systems Repeaters sites, mobile and base station Highly congested RF environments Mobile including Vehicles Programmable Crystal Filter* Frequency band 118 137 MHz range Bandwidth 25 KHz Programmable steps 1.25 KHz Rejection 30 dbc min @ adjacent channel (+/-25 KHz) 60 dbc min @ semi-adjacent channel (+/-50 KHz) Spurious < -9 Overall gain, max 25 db Adjustable gain range 20 db range Maximum output power Maximum input power, no damage Overload protection Yes, self recovery 1.5:1 max Noise figure <4 db at max gain Alarms Yes, LNA failure, Main Power Supply failure, Backup Power Supply failure, Overload, Excessive Input Power Alarms output LEDs and Dry Contacts SMA (f) Programming Via USB I/O ports, communications Via RS232 (optional) 12 to 48 VDC 5W Dimension 8 x 6 x 1 inches 203 x 152 x 25 mm 2.2 lbs 1.0 kg
VHF PROGRAMMABLE ACTIVE CRYSTAL FILTER* 136-174 MHz ACF1 Series Crystal filter based filtering system Software programmable tuning, 1.25 KHz steps Sharp filtering response Front end LNA included for low noise figure User adjustable gain High linearity Transmitter Bypass (TXBP) Module as optional N(f) to SMA(m) jumpers included, 1 ft, 2 pcs Programmable Active Crystal Filter (US Patent Protected) DOC TW043.12 01122014 Fiplex is a registered trademark of Fiplex Communications, Inc. Fiplex Communications, Inc. reserves the right to change specifications without prior notice. P25, DMR, NXDN, TETRA, Conventional and others Repeaters sites, mobile and base station Highly congested RF environments Mobile applications like trains, cars, trucks Programmable Crystal Filter* Frequency bands and Bandwidths ACF11-12.5 136 150 MHz range & 12.5 KHz BW ACF12-12.5 150 174 MHz range & 12.5 KHz BW ACF11-25 136 150 MHz range & 25 KHz BW ACF12-25 150 174 MHz range & 25 KHz BW Programmable steps 1.25 KHz Rejection 12.5KHz BW 30 dbc min @ adjacent channel (+/-12.5 KHz) 60 dbc min @ semi-adjacent channel (+/-25 KHz) 25KHz BW 30 dbc min @ adjacent channel (+/-25 KHz) 60 dbc min @ semi-adjacent channel (+/-50 KHz) Spurious < -9 Overall gain, max 25 db Adjustable gain range 20 db range Maximum output power Maximum input power, no damage Overload protection Yes, self recovery 1.5:1 max Noise figure <4 db at max gain Alarms Yes, LNA failure, Main Power Supply failure, Backup Power Supply failure, Overload, Excessive Input Power Alarms output LEDs and Dry Contacts SMA (f) Programming Via USB I/O ports, communications Via RS232 (optional) 12 to 48 VDC 5W Dimension 8 x 6 x 1 inches 203 x 152 x 25 mm 2.2 lbs 1.0 kg
UHF PROGRAMMABLE ACTIVE CRYSTAL FILTER* 380-512 MHz ACF4 Series Crystal filter based filtering system, 12.5KHz, 25KHz and 50KHz BW Software programmable tuning, 3.125 KHz steps Sharp filtering response Front end LNA included for low noise figure User adjustable gain Transmitter Bypass (TXBP) available for transceivers applications N(f) to SMA(m) jumpers included, 1 ft, 2 pcs P25, DMR, NXDN, TETRA, Conventional and others Repeaters sites, mobile and base station High RF congested environments Mobile applications like trains and cars / trucks Programmable Active Crystal Filter (US Patent protected) DOC TW049.06 11122017 Fiplex is a registered trademark of Fiplex Communications, Inc. Fiplex Communications, Inc. reserves the right to change specifications without prior notice. Programmable Crystal Filter* Frequency bands and Bandwidths ACF41-50 380 430MHz range & 50KHz BW ACF42-12.5 450 470MHz range & 12.5KHz BW ACF42-25 450 470MHz range & 25KHz BW ACF43-12.5 465 485MHz range & 12.5KHz BW ACF43-25 465 485MHz range & 25KHz BW ACF44-12.5 485-512MHz range & 12.5KHz BW ACF44-25 485-512MHz range & 25KHz BW Programmable steps 3.125 KHz Rejection 12.5KHz BW 30 dbc min @ adjacent channel (+/-12.5 KHz 60 dbc min @ semi-adjacent channel (+/-25 KHz) 25KHz BW 30 dbc min @ adjacent channel (+/-25 KHz) 60 dbc min @ semi-adjacent channel (+/-50 KHz) 50KHz BW 16 dbc min @ adjacent channel (+/-50 KHz) 40 dbc min @ semi-adjacent channel (+/-100 KHz) Overall gain, max 25 db (+/-2 db) Adjustable gain range 20 db range Maximum output power Maximum input power, no damage Overload protection Yes, self recovery 1.5:1 max Noise figure <4 db at max gain Alarms Yes, LNA failure, Main Power Supply failure, Backup Power Supply failure, Overload, Excessive Input Power Alarms output LEDs and Dry Contacts SMA (f) Programming Via USB 12 to 48 VDC 5 W Dimension 8 x 6 x 1 inches 203 x 152 x 25 mm 2.2 lbs 1.0 kg Tx Bypass Yes, option TXB4, up to 50W
TRANSMITTER BYPASS Aeronautical, 118 to 869 MHz TXBP Series PIN diode based switch, no mechanical parts Allows the use of the Fiplex Active Crystal Filter* (ACF) Series in half duplex and simplex applications Low insertion loss High Tx/Rx isolation Small size Ready to be installed with Active Crystal Filters* (DC and RF cable jumpers included) Transmitter Bypass (TXBP) Mobile, base station, portable and any other radio equipment with single Tx/Rx antenna port TETRA, P25, DMR, NXDN, Conventional and others Air-to-Ground and Ground Communications Systems Mobile applications including Vehicles Highly congested RF environments Available for Aeronautical, VHF and UHF bands Connection TXBP DOC TW051.01 01122014 Fiplex Communications, Inc. reserves the right to change specifications without prior notice. Tx/Rx ACF OUT Active Crystal Filter (ACF) Antenna ACF IN Active Crystal Filter* (ACF) + Transmitter Bypass (TXBP) Active Crystal Filter* (ACF) + Transmitter Bypass (TXBP)
TRANSMITTER BYPASS Aeronautical, 118 to 869 MHz TXBP Series Transmitter Bypass Frequency band See table below Insertion loss See table below Maximum input power 50 W 1.31:1 max Tx/Rx and antenna ports: N(f) ACF IN and ACF out: SMA(f) 12 VDC 5 W Dimension 9 x 9 x 1.3 inches 227 x 228 x 34 mm 4 lbs 1.8 kg Model Frequency band Insertion loss TXBP-A1 118-137 MHz 0.4 db TXBP-11 136-155 MHz 0.5 db TXBP-12 155-174 MHz 0.5 db TXBP-41 380-430 MHz 0.7 db TXBP-42 430-490 MHz 0.7 db TXBP-43 480-527 MHz 0.8 db TXBP-71 763-806 MHz 1.2 db TXBP-82 806-869 MHz 1.2 db DOC TW051.01 01122014 Fiplex Communications, Inc. reserves the right to change specifications without prior notice.
Fiplex Communications, Inc. develops, designs and manufactures a wide line of passive and active products for the Telecommunications Industry, which includes standard and customized solutions. Our product line offers solutions for site equipment, coverage enhancement and RF conditioning, from 25MHz to 2.5GHz, to be applied in: Conventional Two Way Radio systems Trunked radio systems like P25, TETRA, iden, TETRAPOL, MPT1326, among others. Cellular systems like GSM, GPRS/EDGE, CMDA, 1X, WCDMA, HSDPA TV and FM, analog and digital Our main goal is the total customer satisfaction, based on a high quality product commitment. Combined with our engineering experience and reputation, we become one of the most important high tech manufacturer for private and public sectors, such as military, police and civil defense. info@fiplex.com FIPLEX Headquarters 2101 NW 79th Avenue. FL 33122. US Ph: +1 305 884 8991 Fax: +1 305 884 4041 EMEA Office Calle Medes, 4-6, Local. 08023 Barcelona. Spain europe.sales@fiplex.com Ph: +34 93 551 9746 www.fiplex.com