Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 1 of 23 ABE ABEI ARE AUTO BIE (ver FT BIE) BAUTO (ver FT BIE) ABR ABR BLE NBR ABRA2 ABRC ABRCA2 ABPC ABPCA2 ABP NBP BCPZ BCPB BCPN BCPA2 BCPZ BL RSZ TAEZ TAEN ABA FS
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 2 of 23 CHARACTERISTICS Drill point: drill material directly no need for pre-drilled hole. Self-tapping thread. Wide variety of head types, diameters and lengths for different applications: flexibility in installation. Available in zinc plated, black zinc-plated, white zincplated and silver ruspert coatings. Versions in standard commercial lacquered plate colours (RAL colour scheme). Coloured caps available for hexagonal heads. APPLICATIONS For joining metal to wood, joining metallic elements, or plastic, wood or other materials on metallic materials. Versions with galvanized steel-epdm or stainless steel-epdm washer for sealed joints in façades and roofing, in different diameters. BASE MATERIALS APPLICATION EXAMPLES
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 3 of 23 ABE ABEI BIE SELECTION TABLE Code Regulation Head Socket DIN 7504K DIN 7504K DIN 7504K ARE --- AUTO --- BAUTO --- washer washer washer washer washer washer ø EPDM washer (1) Material/Coating (2) Material to be fixed --- 14, 16, 18, 25 Steel / Zinc-plated Steel --- --- Stainless Steel Aluminum --- 16 A2 / Silver ruspert Steel and Stainless Steel --- 16, 18, 25 Steel / Zinc-plated Steel --- 16 Steel / Zinc-plated Steel --- 16 A2 / Silver ruspert Steel and Stainless Steel ABR DIN 7504N Round head Ph --- Steel / Zinc-plated Steel NBR DIN 7504N Round head Ph --- Steel / Black zinc-plated Steel ABR BLE DIN 7504N Round head Ph --- Steel / Zinc-plated + paint Steel ABRA2 DIN 7504N Round head Ph --- Stainless Steel Aluminium ABRC DIN 7504N Round head Square --- Steel / Zinc-plated Steel ABRCA2 DIN 7504N Round head Square --- Stainless Steel Aluminium ABA --- Countersunk Ph --- Steel / Zinc-plated Wood + Steel FS --- washer --- 14 Steel / Zinc-plated Steel + Wood ABP DIN 7504P Countersunk Ph --- Steel / Zinc-plated Steel NBP DIN 7504P Countersunk Ph --- Steel / Black zinc-plated Steel ABPC DIN 7504P Countersunk Square --- Steel / Zinc-plated Steel TAEZ --- Flat head Ph --- Steel / Zinc-plated Steel TAEN --- Flat head Ph --- Steel / Black zinc-plated Steel BCPZ --- BCPN --- BCPB --- BCPZ BL --- BCPA2 --- Extra-flat bevelled Extra-flat bevelled Extra-flat bevelled Extra-flat bevelled Extra-flat bevelled Ph --- Steel / Zinc-plated Steel Ph --- Steel / Black zinc-plated Steel Ph --- Steel / Zinc-plated + paint Steel Ph --- Steel / Zinc-plated + paint Steel Ph --- Stainless Steel Aluminium RSZ --- Flat bevelled Ph --- Steel / Zinc-plated Steel (1) EPMD washer characteristics according to ARVUL Data Sheet (2) Coatings: Zinc-plated 3 µm according to ISO 4042 A1J Black zinc-plated 3 µm according to ISO 4042 A1N Silver ruspert > 500 hours in saline mist chamber according to ISO 9227
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 4 of 23 MATERIALS Characteristic ABE, ARE, AUTO, ABR, ABRBL, NBR, ABRC, ABA, FS, ABP, NBP, ABPC, TAEZ, TAEN, BCPZ, BCPN, BCPB, RS ABRA2, ABRCA2, ABPCA2, BCPA2 BIE, BAUTO (silver ruspert coating) Material Special steel for SAE J403 1022 thermal treatment A2 Stainless Steel A2 Stainless Steel head and shaft. Special steel point for SAE J403 1022 thermal treatment Surface hardness > 500 HV --- Core hardness 240-450 HV --- Head and shaft --- Point > 500 HV Head and shaft --- Point 240-450 HV Depth hardness ST 2.5 3.5: 0.05 0.18 mm. ST 3.9 5.5: 0.10 0.23 mm. ST 6.3: 0.15 0.28 mm. --- Head and shaft --- Point: ST 4.8 5.5: 0.10 0.23 mm. ST 6.3: 0.15 0.28 mm. POINT SELECTION The choice of screw point must be such that the total thickness of materials to be joined (including any intermediate spaces) is lower than the edge of the drill point; otherwise screw breakage may occur during installation.
Drill Speed TECHNICAL DATA SHEET Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 5 of 23 INSTALLATION PARAMETERS Parameter ST 3.5 ST 3.9 ST 4.2 ST 4.8 Maximum installation strength ST 5.5 M 5.5 ST 6.3 [N] 150 200 250 250 350 350 Steel [rpm] 1800-2500 1000-1800 Stainless Steel [rpm] 1000-1500 600-1000 Maximum time [sg] 4 4.5 5 7 11 13 Maximum torque [Nm] 2.8 3.8 4.7 6.9 10.4 16.9 10 N 1 Kg 10 Nm 1Kg m With high drilling times or excessive drilling speed there is a risk of burning the drill bit and therefore not drilling the material.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 6 of 23 MAXIMUM THICKNESS TO BE FIXED Length ST 3,5 ST 3,9 ST 4,2 ST 4,8 ST 5,5 ST 6,3 9,5 2,85 11 4,2 13 6,2 5,8 4,3 3,7 16 9,2 8,8 7,3 5,5 19 12,1 11,7 10,3 8,7 8,7 7 22 15,1 14,7 13,3 11,7 11,7 10 25 18,1 17,7 16,3 14,7 14,7 13 32 25,1 24,5 23 21,5 21,5 20 38 30,5 29 27,5 27,5 26 45 36 34,5 34,5 33 50 41 39,5 39,5 38 60 49,5 49,5 48 63 52,5 52,5 51 73 62,5 62,5 61 75 64,5 64,5 63 80 69,5 68 90 79,5 78 100 89,5 88 110 98 120 108 130 118 140 128 SCREW RESISTANCE CHARACTERISTICS* SIZE TENSION [kn] SHEAR [kn] ST 2.9 2.62 1.31 ST 3.5 3.81 1.91 ST 3.9 4.64 2.32. ST 4.2 5.26 2.63 ST 4.8 7.11 3.56 1 KN 100 Kg ST 5.5 9.63 4.82 ST 6.3 13.36 6.68 For tension loads, the inherent resistance of plates to be fixed must be taken into account, which is usually less than the resistance of the screw itself, as the screw will probably tear the plates.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 7 of 23 SIZE RECOMMENDED TENSION LOAD IN STEEL PLATE RECOMMENDED LOAD e[mm] N[kN] e[mm] N[kN] e[mm] N[kN] ST 3.5 0.8 0.55 1.5 0.89 2.0 1.13 ST 3.9 0.8 0.54 1.5 0.97 2.0 1.50 ST 4.2 2.0 1.63 2.5 1.51 3.0 2.62 ST 4.8 2.0 1.87 3.0 2.77 4.0 3.71 ST 5.5 2.0 1.77 3.5 2.86 5.0 3.43 ST 6.3 2.5 1.44 4.0 3.19 5.0 4.83 SIZE RECOMMENDED TENSION LOAD IN ALUMINIUM PLATE RECOMMENDED LOAD e[mm] N[kN] e[mm] N[kN] e[mm] N[kN] ST 4.8 2.0 0.95 3.0 1.52 4.0 2.10
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 8 of 23 1. ABE Self-drilling screw - hexagonal head with embossed washer Steel Zinc-plated coating Available in different colours Plate assembly Plate profile embossed washer embossed washer Screw point 1.1. Details Code ST 3.5 ST 4.2 ST 4.8 ST 5.5 ST 6.3 d k : washer head diameter [mm] 8 8.5 10 10.5 12.6 k: head thickness [mm] 3.3 4.1 4.3 4.3 6.3 c: washer thickness [mm] 1.2 1.5 1.6 1.9 2 s: spanner [mm] 6 7 8 8 10 D: exterior thread diameter [mm] 3.53 4.22 4.80 5.46 6.25 d: interior thread diameter [mm] 2.64 3.10 3.58 4.17 4.88 p: thread [mm] 1.3 1.4 1.6 1.8 1.8 l: lengths [mm] 9.5-32 13-38 13-38 19-75 19-240 Installation bit code (hexagonal magnetic bit) BOCA006 BOCA007 BOCA008 BOCA008 BOCA010 Drill capacity [mm] 0.70-2.25 1.75-3.00 1.75-4.40 1.75-5.25 2.50-6.00 Zinc-plated finish. For general plate-plate joints. Versions with assembled EPMD washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 9 of 23 2. ABEI Self-drilling screw - hexagonal head with embossed washer Stainless Steel A2 Stainless Steel A2 Plate assembly Plate profile Aluminium embossed washer embossed washer Reduced screw point 1.2. Details Code ST 4.2 ST 4.8 ST 5.5 ST 6.3 d k : washer head diameter [mm] 8.5 10 10.5 12.6 k: head thickness [mm] 4.1 4.3 4.3 6.3 c: washer thickness [mm] 1.5 1.6 1.9 2 s: spanner [mm] 7 8 8 10 D: exterior thread diameter [mm] 4.22 4.80 5.46 6.25 d: interior thread diameter [mm] 3.10 3.58 4.17 4.88 p: thread [mm] 1.4 1.6 1.8 1.8 l: lengths [mm] 13-38 13-38 19-75 19-25 Installation bit code (hexagonal magnetic bit) BOCA007 BOCA008 BOCA008 BOCA010 Drill capacity [mm] 1.75-3.00 1.75-4.40 1.75-5.25 2.50-6.00 Stainless Steel A2. For general plate-plate joints made of aluminum.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 10 of 23 3. ARE Self-drilling screw with reduced point and 8mm hexagonal head Steel Zinc-plated coating Available in different colours Plate assembly Plate profile Aluminium embossed washer embossed washer Reduced screw point 2.1. Details C ST 4.8 ST 5.5 ST 6.3 d k : washer head diameter [mm] 11 11 11 k: head thickness [mm] 4.45 5.45 5.45 c: washer thickness [mm] 1.15 1.25 1.25 s: spanner [mm] 8 8 8 D: exterior thread diameter [mm] 4.80 5.46 6.25 d: interior thread diameter [mm] 3.58 4.17 4.88 p: thread [mm] 1.6 1.8 1.8 l: lengths [mm] 16-19 22 20-80 Installation bit code (hexagonal magnetic bit) BOCA008 BOCA008 BOCA008 Maximum drill capacity [mm] 0.0-1.0 1.0-1.5 1.0-1.5 Zinc-plated finish. Low thickness plate-plate joints, up to 1.5 mm. The point performs a prior drill-hole with a smaller diameter. The thread, with a greater diameter, creates an extrusion in the plate, lengthening and strengthening the threaded area. Drill following the upper part of the rpm range from the table in section 5. Versions with assembled EPDM washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 11 of 23 4. AUTO Self-drilling screw for girders - screw point no.5 - hexagonal head Steel Zinc-plated coating Available in different colours Plate assembly Plate profile IPN embossed washer embossed washer Girder screw point 3.1. Details Code M 5.5 d k : washer head diameter [mm] 11 k: head thickness [mm] 5.3 c: washer thickness [mm] 1.15 s: spanner [mm] 8 Point #5 D: exterior thread diameter [mm] 5.5 d: interior thread diameter [mm] 4.6 p: thread [mm] 1.06 l: lengths [mm] 32-38 Installation bit code (hexagonal magnetic bit) BOCA008 Drill capacity [mm] 4.0 12.0 Zinc-plated finish. For general plate-plate joints for thicknesses up to 12 mm. Versions with assembled EPDM washer for sealed joints in façades and roofing (consult ARVUL Technical Data Sheet).
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 12 of 23 5. ABR, NBR, ABR_BLE, ABRA2 Self-drilling screw - Dome head - Ph socket Steel Available in stainless Plate assembly Plate profile Coatings Zinc-plated coating Black zinc-plated White zincplated Available in different colours Ph Dome head Screw point 4.1. Details Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5 d k : head diameter [mm] 6.9 7.5 8.2 9.5 10.8 k: head thickness [mm] 2.60 2.80 3.05 3.55 3.95 Ph bit nº 2 nº 2 nº 2 nº 2 nº 3 R: head radius [mm] 5.4 5.8 6.2 7.2 8.2 D: exterior thread diameter [mm] 3.53 3.91 4.22 4.80 5.46 d: interior thread diameter [mm] 2.64 2.92 3.10 3.58 4.17 p: thread [mm] 1.3 1.3 1.4 1.6 1.8 l: lengths [mm] 9.5-32 13-32 13-50 13-120 19-73 Installation bit code (Ph bit) PUPHC02 PUPHC02 PUPHC02 PUPHC02 PUPHC03 PUPHL02 PUPHL02 PUPHL02 PUPHL02 PUPHL03 Drill capacity [mm] 0.70-2.25 0.70 2.40 1.75 3.00 1.75 4.40 1.75-5.25 Zinc-plated (code ABR), white zinc-plated (code ABR_BLE) and black zinc-plated (code NBR) finishes. A2 stainless steel version (code ABRA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 13 of 23 6. ABRC, ABRCA2 Self-drilling screw Dome head square socket Steel Zinc-plated coating Available in stainless Plate assembly Plate profile Aluminium Square socket Dome head Screw point 5.1. Details Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5 d k : head diameter [mm] 6.9 7.5 8.2 9.5 10.8 k: head thickness [mm] 2.60 2.80 3.05 3.55 3.95 Squarebit nº 1 nº 1 nº 2 nº 2 nº 3 R: head radius [mm] 5.4 5.8 6.2 7.2 8.2 D: exterior thread diameter [mm] 3.53 3.91 4.22 4.80 5.46 d: interior thread diameter [mm] 2.64 2.92 3.10 3.58 4.17 p: thread [mm] 1.3 1.3 1.4 1.6 1.8 l: lengths [mm] 9.5-32 13-38 13-50 13-100 19-73 Installation bit code (square bit) PUCUC01 PUCUC01 PUCUC02 PUCUC02 PUCUC03 PUCUL01 PUCUL01 PUCUL02 PUCUL02 PUCUL03 Drill capacity [mm] 0.70-2.25 0.70 2.40 1.75 3.00 1.75 4.40 1.75-5.25 A2 stainless steel version (code ABRA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness. Zinc-plated finish (code ABRC). Grooves in the lower part of head which guard against rotation.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 14 of 23 7. ABA / ATA Self-drilling screw with two-wing screw point countersunk head Ph/Tx socket Steel Zinc-plated coating Wood - Steel Ph / Tx Countersunk head Two-wing screw point 6.1. Details CODE ABA ATA Diameter ST 4.8 ST 5.5 ST 6.3 ST 4.8 ST 5.5 ST 6.3 d k : head diameter [mm] 9.50 10.80 12.40 9.50 10.80 12.40 K: head thickness [mm] 3.15 4.27 4.81 3.15 4.27 4.81 Drill length [mm] 10 12 13 10 12 13 D: outer thread diameter [mm] 4.80 5.46 6.25 4.80 5.46 6.25 d: inner thread diameter [mm] 3.58 4.17 4.88 3.58 4.17 4.88 p: pitch [mm] 1.6 1.8 1.8 1.6 1.8 1.8 l: screw length [mm] 32-50 38-65 60-85 32-50 38-65 50-100 Installation bit code (Ph) PUPHC02 / PUPHL02 PUTO025 PUTO025 PUTO030 Recess PH2 PH2 PH2 T25 T25 T30 Drill capacity [mm] 1.75-4.00 1.75-5.00 2.50-6.00 1.75-4.00 1.75-5.00 2.50-6.00
TECHNICAL DATA SHEET Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 15 of 23 Zinc-plated finish. For joining wood (thickness > 12 mm) and plates (> 1.75 mm). The two wings at the point perform a pre-drill hole in the wood to prevent the thread from dulling and the wood from cracking in the area of the drill hole. Grooves in the lower part of head which directly countersink wood, melamine and other materials, at the same time as guarding against rotation. For wood metal fixings when wood thickness is greater than 12 mm a hole is required in the wood with a space which prevents the starting of threading in the wood before finishing drilling the metal. Otherwise the screw point may burn out, the wood may break or, in some cases, there may be ungluing of the wood metal joint. To avoid this, one of the following options must be taken: Pre-drill the wood, with a drillhole of a greater diameter than the thread. Use an extra-long screw point (not usually sold) Use a two-wing point screw: a bore is produced in the wood with a greater diameter than that of the thread, so that this does not come into contact with the wood. The wings will break when they come into contact with the metal and the edge threads in it. Fixing with wood thickness 12 mm Fixing with wood thickness > 12 mm with conventional point screw Solution 1: extra-long point screw Solution 2: Two-wing point screw. a) drilling of wood b) wood boring + metal boring c) threading in metal
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 16 of 23 8. FS Metal-wood roofing screw Steel Zinc-plated coating Available in different colours Metal plate - Wood embossed washer embossed washer Reduced screw point 7.1. Details Code ST 4.8 d k : washer head diameter [mm] 10 k: head thickness [mm] 4.9 c: washer thickness [mm] 1.1 s: spanner [mm] 8 D: exterior thread diameter [mm] 4.80 d: interior thread diameter [mm] 3.30 p: thread [mm] 2.1 l: lengths [mm] 19 35 l G : maximum thread length [mm] Complete Installation bit code (hexagonal magnetic bit) BOCA008 Drill capacity [mm] 1.50 max Zinc-plated finish with lacquered head and washer. For use in metal-wood fixings.
TECHNICAL DATA SHEET Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 17 of 23 9. ABP, NBP Self-drilling screw countersunk head Ph socket Steel Zinc-plated coating Black zinc-plated Plate assembly Metal profile Ph Countersunk head Screw point 8.1. Details Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5 d k : head diameter [mm] 6.8 7.5 8.1 9.5 10.8 k: head thickness [mm] 2.1 2.3 2.5 3.0 3.4 Ph bit nº 2 nº 2 nº 2 nº 2 nº 3 Head countersink angle º 80 80 80 80 80 D: exterior thread diameter [mm] 3.53 3.91 4.22 4.80 5.46 d: interior thread diameter [mm] 2.64 2.92 3.10 3.58 4.17 p: thread [mm] 1.3 1.3 1.4 1.6 1.8 L: lengths [mm] 9.5-25 13-38 13-38 13-50 19-50 Installation bit code (Ph) PUPHC02 PUPHC02 PUPHC02 PUPHC02 PUPHC03 PUPHL02 PUPHL02 PUPHL02 PUPHL02 PUPHL03 Drill capacity [mm] 0.70-2.25 0.70-2.40 1.75-3.00 1.75-4.40 1.75-5.25 Zinc-plated (code ABP) or black-zinc-plated (code NBP) finish. For metal-metal fixings where the screw is required to be level with the material to be fixed. Requires prior countersinking.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 18 of 23 10. ABPC Self-drilling screw countersunk head square socket Steel Zinc-plated coating Available in stainless Plate assembly Plate profile Square socket Countersunk head Screw point 9.1. Details Code ST 3.5 ST 3.9 ST 4.2 ST 4.8 ST 5.5 d k : head diameter [mm] 6.8 7.5 8.1 9.5 10.8 k: head thickness [mm] 2.1 2.3 2.5 3.0 3.4 Square bit nº 1 nº 1 nº 2 nº 2 nº 3 Head countersink angle º 80 80 80 80 80 D: exterior thread diameter [mm] 3.53 3.91 4.22 4.80 5.46 d: interior thread diameter [mm] 2.64 2.92 3.10 3.58 4.17 p: thread [mm] 1.3 1.3 1.4 1.6 1.8 L: lengths [mm] 13-25 19-38 16-38 13-50 19-50 Installation bit code (Square drill) PUCUC01 PUCUL01 PUCUC01 PUCUL01 PUCUC02 PUCUL02 PUCUC02 PUCUL02 PUCUC03 PUCUL03 Drill capacity [mm] 0.70-2.25 0.70-2.40 1.75-3.00 1.75-4.40 1.75-5.25 Zinc-plated finish (code ABPC) and A2 Stainless steel version (code ABPCA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness. For metal-metal fixings where the screw is required to be level with the material to be fixed. Requires prior countersinking. With 4 grooves in the lower part of head which directly countersink wood, melamine and other materials, at the same time as guarding against rotation.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 19 of 23 11. TAEZ, TAEN Self-drilling screw low dome head Ph socket with embossed washer Steel Zinc-plated coating Black zinc-plated Metal plate assembly Plate profile Ph Low dome head Screw point 10.1. Details Code ST 4.2 d k : head diameter [mm] 11.17 Head thickness [mm] 2.55 Ph bit nº 2 k: point length 4.4 5.2 D: exterior thread diameter [mm] 4.22 d: interior thread diameter [mm] 3.10 p: thread [mm] 1.4 l: lengths [mm] 13-32 Installation bit code (Ph bit) PUPHC02 PUPHL02 Drill capacity [mm] 0.75-2.50 Zinc-plated (code TAEZ) or black zinc-plated (code TAEN) finish. For use in fixings where an even distribution of pressure is required, without the need for assembling additional flat washers, and without the head protruding excessively: o For fixing soft materials on metal (methacrylate, plastic, chipboard, thin metallic plates, etc). o Large or oversized holes.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 20 of 23 12. BCPZ, BCPN, BCPB, BCPZ_BL, BCPA2 Self-drilling screw extra-flat head Ph socket Steel Available in stainless Metal plate assembly Plate profile Coatings Zinc-plated coating Black zinc-plated White zincplated White head only BCPZ BL Ph Extra-flat head Screw point 11.1. Details Code ST 4.2 d k : head diameter [mm] 8.0 k: head thickness [mm] 0.7 Ph bit nº 2 Point length [mm] 4 D: exterior thread diameter [mm] 4.22 d: interior thread diameter [mm] 3.10 p: thread [mm] 1.4 l: lengths [mm] 14-23 Head countersink angle º 65 Installation bit code (Ph bit) PUPHC02 PUPHL02 Drill capacity [mm] 0.7-2.0 Zinc-plated (code BCPZ), black zinc-plated (code BCPN) or completely white painted RAL 9010 (code BCPB) finishes. Bevelled head to prevent snagging on sliding parts. For joints on metal which require a low head (sliding doors and windows, inlaid locks, etc.). May be used as a substitute for rivets in many applications, with the advantage of being removable. Reduced cone under head to improve finish on flat surfaces. A2 Stainless steel version (code BCPA2) for use exclusively with aluminium (does not produce corrosion by galvanic coupling). Do not use screw in stainless steel to drill steel, as point will burn out due to lack of hardness.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 21 of 23 13. RS Self-drilling screw - rivet head Steel Zinc-plated coating Metal plate assembly Plate profile Aluminium Ph Extra-flat head Screw point 12.1. Details CODE ST 3.5 ST 4.2 ST 4.8 d k : head diameter [mm] 6.7 8 9.3 k: head thickness [mm] 1.2 1.3 1.5 d: exterior thread diameter [mm] 3.5 4.2 4.8 p: thread [mm] 1.3 1.4 1.6 l: lengths [mm] 9-16 13-32 13-38 Ph bit nº 2 nº 2 nº 2 Installation bit code (Ph bit) PUPHC02 PUPHL02 PUPHC02 PUPHL02 PUPHC02 PUPHL02 Drill capacity [mm] 0.7 2.25 1.75 3.00 1.75 4.40 Self-drilling screw with reduced head height. This reduced head height gives it special characteristics: o Avoids interference with moving elements. o Aesthetic finish as screw is rounded and is concealed once installed. o May be used as a substitute for rivets. o Wide range of thicknesses to be drilled - from 0.70 mm to 4.40 mm. o Wide range of measurements. o Cone between thread and head to ensure piece sits perfectly. o Complete thread. o Annular groove at the bottom of the head which allows the material originated in the drilling process to stay in this area, allowing the screw to sit better.
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 22 of 23 Drilling process, breaking shavings Perfect piece finish Different views of the screw:
Denomination: Reference: FT BRO-en Date: 18/05/18 Revision: 11 Page: 23 of 23 COLOURS All self-drilling screws may be supplied painted in the following options (RAL colour scheme codes): Head only or head and EPDM washer o White RAL 9010 o Pyrenean white RAL 9002 o Oyster white RAL 9018 o Bidasoa cream RAL 1000 o Sand RAL 1001 o Ivory RAL 1015 o Copper RAL 1007 o Tile red RAL 3011 o Coral red RAL 3003 o Burgundy RAL 3005 o Blue RAL 5009 o Lake blue RAL 5019 o Navarre green RAL 6028 o Light green RAL 6021 o Moss green RAL 6005 o Metallic grey RAL 9006 o Grey RAL 7035 o Black RAL 9005 Measurements: from 3.9x13 to 6.3x140. Consult Sales Department for minimum quantity, price and delivery time. Farmer Screw (FS) Colours: o Tile red RAL 3009 o Dark blue RAL 5010 o Olive green RAL 6005 o Light brown RAL 8004 o Dark brown RAL 8017 o Grey RAL 9006 o White RAL 9010 o Black RAL 9011 Fully painted o White RAL 9010 o Black RAL 9005 o Burgundy RAL 3005 o Moss green RAL 6005 o Blue RAL 5009 Measurements: from 2.9x6.5 to 5.5x 32. Minimum quantity: 15 kg Consult Sales Department for price and delivery time. ATAP Codes: decorative plastic caps for 8 mm (ABE 4.8, ABE 5.5 and ARE) and 10 mm (ABE 6.3) hexagonal head screws. o Pyrenean white RAL 9002 o Oyster white RAL 9018 o Sand RAL 1001 o Tile red RAL 3011 o Coral red RAL 3003 o Navarre green RAL 6028 o Black RAL 9005