Power upplies HP eries: Heavy Duty Modular Power upplies his new generation of high power, intelligent modular power supplies, range from 500 through 4920 watts and were designed for optimum flexibility. he modular design makes these units easy to customize for unusual voltage and power combinations, and the intelligent modules allow the use of I 2 C or CANBU/R485 communication to monitor and control many attributes of the power supply. All units have power factor corrected inputs, an end mounted fan for cooling and a variety of built-in signals and controls. High reliability and a flexible design make these power supplies an excellent choice for process control and semiconductor fabrication applications. Applications Process Controls emi-conductor Fabrication Automated ervice Equipment Features Available in intelligent and non-intelligent models ingle, dual and triple output modules configurable in combinations up to 24 different outputs ingle phase and three phase inputs I 2 C control in intelligent modules End mounted intelligent fan (speed control/fault status) Voltage adjustment on all outputs (manual or I 2 C) CANBU and R-485 optional interface verload protection on all outputs Power factor correction (.99 typ.) Configurable output UP/DWN sequencing Modular Construction Configurable input and output K signals and indicators Programmable voltage, current limit, inhibit/enable through I 2 C hree year limited warranty Certifications and Compliances U Recognized Component, IE, E37632 - U 60950-/CA C22.2 No. 60950-, 2nd Edition E37632 Related Products urge Protective Devices CD DC to DC Converters Active racking Filters tandard ffering election able Catalog Number utput Voltage utput Current Watts H30-4-0Z 2 V 25 A 500 H30-4N-0Z 5 V 00 A 500 H30-4Q-0Z 24 V 62 A 500 H30-4R-0Z 28 V 53 A 500 H30-4W-0Z 48 V 3 A 500 H45-4Q-3Q-4Z 24 V 92 A 2000 Accessories able Catalog Number Description 73-769-00 UB to I 2 C adapter 70-84-004 Mating Connector Kit for Control & ignals (J Connector) 70-84-023 Mating Connector Kit for I 2 C Interface (J2 Connector) - ow Voltage Directive - IEC/EN 60950-, 2nd Edition RoH Compliant Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions. 7
Power upplies pecifications Description H30 H45 3H3 3H5 Input voltage range 90 264 Vac; 20 300 Vdc; ingle-phase 70-264 Vac; hree-phase Frequency Inrush current Efficiency Power factor urn-on time Hold-up time AC K utput voltage range Input 47 63 Hz 40 A peak maximum (soft start) Up to 85% at full load 0.99 typical AC on.5 s typical, inhibit/enable 50 ms typical, configurable through I 2 C; 50 ms internal turn-on delay (dual output only) 0 ms minimum >5 ms early warning before outputs lose regulation, full cycle ride through at 50 Hz, configurable through I 2 C utput ±0% minimum for all outputs, user-adjustable pot, full adjustment range using I 2 C Factory set point accuracy 0.0 I 2 C output program accuracy ±5% Margining ine/load regulation Ripple Dynamic response Recovery time vercurrent protection hort-circuit protection vervoltage protection hermal protection Remote sense ingle wire parallel DC K Minimum load Housekeeping bias voltage Module inhibit utput/output isolation Global inhibit/enable ±4 6% nominal analog (single output module only) 0.4% or 20 mv maximum (% maximum for 500 W module) RM: 0.% or 0 mv maximum; Pk-Pk:.0% or 50 mv maximum; bandwidth limited to 20 MHz <2% or 00 mv with 25% load step Within % in <300 μs ingle output module and main output of the dual output module 05 20% of rated output current. Aux output of dual output module 05 40% of rated output current. pecial programmable CP delay on 500 W module from 00 ms to 25.5 s with shutdown features. Configurable through I 2 C with load calibration required (except for 500 W module). Protected for continuous short-circuit; recovery is automatic upon removal of short. hutdown mode available on the 500 W module. ingle output module: 2 5.5 V, 22 34%; 6 60 V, 0 20%; Dual output module: 2 6 V, 22 34%; 8 28 V, 0 20% riple output module: No overvoltage protection provided; Configurable through I 2 C All outputs are disabled when the internal temperature exceeds the safe operating range; configurable through I 2 C Up to 0.5 V drop (not available on triple output module) Current share to within 2% of total rated current ±5% of nominal; configurable through I 2 C Not required 5 V dc @.0 A maximum present whenever ac input is applied Configured and controlled through I 2 C > MΩ, 500 V, ogic and ogic 0 ; configurable through I 2 C Environmental perating temperature -40 C to +70 C ambient; derate each output 2.5% per degree from 50 C to 70 C torage temperature -40 C to +85 C Humidity Vibration MBF demonstrated 0% to 95% RH, non-condensing IEC68-2-6 to the levels of IEC72-3-2 >550,000 hr. @ full load, 220 V ac, 25 C ambient Electromagnetic susceptibility EN6000-4-2, EN6000-4-4, EN6000-4-5 evel 3 EMI filter Radiated EMI afety CIPR 22/EN55022 evel B when installed in a properly grounded and shielded metal enclosure CIPR 22/EN55022 evel B when installed in a properly grounded and shielded metal enclosure General Case dimensions H x W x D in (mm) 5 x 5 x (27.0 x 27.0 x 279.4) 5 x 8 x (27.0 x 203.2 x 279.4) 5 x 5 x (27.0 x 27.0 x 279.4) 5 x 8 x (27.0 x 203.2 x 279.4) Case weight 6.2 lbs (2.8 kg) 9.0 lbs (4.08 kg) 6.2 lbs (2.8 kg) 9.0 lbs (4.08 kg) lots available per case 9 4 9 4 imited warranty 3 years 72 Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions.
Power upplies utput Module pecification verview Intelligent Module Code 2 3 4 5 6 Module ype ingle ingle ingle ingle Dual riple Max output power 20 W 360 W 750 W 500 W 44 W 36 W Max output current 2 35 A 60 A 50 A 40 A 0 A 2 A utput voltages available 2-60 V 2-60 V 2-60 V 6-60 V 8-5, 24-28; 8-5, 8-5; 8-5, 2-6; 2-6, 2-6; 24-28, 24-28; 24-28, 2-6 8-5, 8-5, 2-6; 8-5, 8-5, 8-5; 8-5, 8-5, 8-28; 8-5, 8-28, 2-6 tandard voltage increments 25 25 25 8 6 8 Remote sense Yes Yes Yes Yes Yes Yes No Remote margin Yes Yes Yes Yes No No No Program - I 2 C control Yes Yes Yes Yes Yes Yes No Active current share Yes Yes Yes Yes Yes No No Module inhibit - I 2 C control Yes Yes Yes Yes Yes Yes Yes Module inhibit - Analog Yes Yes Yes Yes No No No vervoltage/vercurrent protection Yes Yes Yes Yes Yes Yes Yes Minimum load required No No No No No No No lots occupied in any HP case 2 3 4 Weight 0.6 lbs (0.27 kg).0 lbs (0.45 kg).6 lbs (0.73 kg) 2.0 lbs (0.9 kg) 0.6 lbs (0.27 kg) 0.5 lbs (0.23 kg) Non-Intelligent Module Code 2 3-5 6 Module ype ingle ingle ingle - Dual riple Max output power 20 W 360 W 600 W - 44 W 36 W Max output current 35 A 60 A 20 A - 0 A 2 A utput voltages available 2-60 V 2-60 V 2-60 V - 2-28 V 2-28 V tandard voltage increments 25 25 25-9 8 Remote sense Yes Yes Yes - Yes Yes No Remote margin/program Yes Yes Yes - No No No Module inhibit - isolated Yes Yes Yes - - - - ingle wire active current share Yes Yes Yes - Yes No - vervoltage/vercurrent protection Yes Yes Yes - Yes Yes vercurrent Minimum load required No No No - Yes (0% of load) lots occupied in any HP case 2 3 - Weight 3 0.6 lbs (0.27 kg).0 lbs (0.45 kg) 2.0 lbs (0.9 kg) - 0.6 lbs (0.27 kg) No No 0.5 lbs (0.23 kg) ) For dual & triple output modules: the max output power is the total amount of power for the module. 2) For dual & triple output modules: the max output current is the total max current for each output. 3) o calculate the total weight of the power supply: sum up the weight for each module and add it to the weight of the case given under the pecifications able. Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions. 73
Power upplies Catalog Numbering election Intelligent Model Example: 4500W case with: a 500W module set at 24V @ 62.5A and a 750W module set at 24V @ 30A connected in parallel for a total of 24V @ 92.5A single output. H45-4Q-3Q-4Z Case ize Module Codes Case ptions ingle Phase Input H30 = 500 W - 320 W, 9 lots H45 = 800 W - 4500 W, 4 lots hree Phase Input 3H3 = 320 W, 9 lots 3H5 = 4920 W, 4 lots = 20 W single /P ( slot) 2 = 360 W single /P (2 slot) 3 = 750 W single /P (3 slot) 4 = 500 W single /P (4 lot) 5 = 44 W dual /P ( slot) 6 = 36 W triple /P ( slot) X = Extra 30m hold-up ( slot) utput Voltage Codes ee utput Module Voltage/Current able for Intelligent Modules Module ption Codes = tandard = Module enable U = Constant current V = & U combined W = hutdown mode for 500 W Y = & W combined utput Voltage/Current able for Intelligent Modules 2 Paralleling ptions 0 = No Parallel ption -9 = ee Parallel Code able pecial ptions Z = No ptions R = Reverse air N = Not used G = Global enable F = Fan Idle w/inhibit H = pt R + pt G I = pt R + pt F J = pt G + pt F K = pt R + G + F C = CANBU/R485 (73-544-00) B = UB (73-546-00) HP eries: Intelligent Modules Voltage Voltage I 2 C ingle utput Dual utput Code riple utput Adjustment ingle Ranges 4 Module Code Module Code 2 3 4 5 5 6 6 6 2 V A 35 A 60 A 50 A - 0 A 0 A - - 2 A.8-2.2 V 2.2 V B 35 A 60 A 50 A - 0 A 0 A - - 2 A 2.0-2.4 V 3 V C 35 A 60 A 50 A - 0 A 0 A - - 2 A 2.7-3.3 V 3.3 V D 35 A 60 A 50 A - 0 A 0 A - - 2 A 3.0-3.6 V 5 V E 35 A 60 A 50 A - 0 A 0 A - - 2 A 4.5-5.5 V 20 W 750 W 5.2 V F 35 A 60 A 44 A - 0 A 0 A - - 2 A 4.7-5.7 V 5.5 V G 34 A 58 A 36 A - 0 A 0 A - - 2 A 5.0-6. V 6.0 V H 23 A 42 A 97.5 A 40 A 0 A 0 A - - 2 A 5.4-6.6 V 8.0 V I 20 A 36 A 84.4 A 40 A 0 A 4 A A A A 7.2-8.8 V 0 V J 8 A 32 A 75 A 40 A 0 A 4 A A A A 9.0 -.0 V V K 7 A 3 A 68 A 36.3 A 0 A 4 A A A A 9.9-2. V 2 V 7 A 30 A 62.5 A 25 A 0 A 4 A A A A 0.8-3.2 V 4 V M 4 A 2 A 53.5 A 07 A 9 A 4 A A A A 2.6-5.4 V 360 W 500 W 5 V N 4 A 20 A 50 A 00 A 8 A 4 A A A A 3.5-6.5 V 8 V A 9 A 4.6 A 83.3 A - - - 0.5 A 0.5 A 6.2-9.8 V Dual riple 20 V P 0.5 A 8 A 37.5 A 75 A - - - 0.5 A 0.5 A 8.0-22.0 V 24 V Q 8.5 A 5 A 30 A 62.5 A 4 A 2 A - 0.5 A 0.5 A 2.6-26.4 V 28 V R 6.7 A A 26.8 A 53.5 A 3 A 2 A - 0.5 A 0.5 A 25.2-30.8 V 30 V 6.5 A A 25 A 50 A - - - - - 27.0-33.0 V 33 V 6.2 A 0.9 A 22.7 A 35.8 A - - - - - 29.7-36.3 V 36 V U 5.8 A 0 A 20.8 A 35.8 A - - - - - 32.4-39.6 V 42 V V 4.2 A 7.5 A 6 A 35.7 A - - - - - 37.8-46.2 V 48 V W 4.0 A 7.5 A 5.6 A 3.2 A - - - - - 43.2-52.8 V 44 W 36 W 54 V X 3.7 A 6.0 A 3.9 A 27.7 A - - - - - 48.6-59.4 V 60 V Y 3.5 A 6.0 A 2.5 A 25 A - - - - - 54.0-66.0 V ) Certifications pending. 2) Increments of current not shown can be achieved by paralleling modules. ee Parallel Code able. 3) otal output power on dual and triple modules must not exceed the max output power rating for the module. 4) I 2 C Adjustment Ranges apply to single output modules only. 74 Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions.
Power upplies Catalog Numbering election Non-Intelligent Model Example: 320W case with: a 36W triple output module set at V @ A, 24V @ 0.5A, 5V @ 2A and a 600W module set at 24V @ 23.5A. H30-6KQE-3Q-0Z HP eries: Non-Intelligent Modules ingle Dual 20 W 44 W 360 W Case ize Module Codes Case ptions ingle Phase Input H30 = 500 W - 320 W, 9 lots H45 = 800 W - 4500 W, 4 lots hree Phase Input 3H3 = 320 W, 9 lots 3H5 = 4920 W, 4 lots riple 36 W utput Voltage/Current able for Non-Intelligent Modules 3 Voltage = 20 W single /P ( slot) 2 = 360 W single /P (2 slot) 3 = 600 W single /P (3 slot) 5 = 44 W dual /P ( slot) 6 = 36 W triple /P ( slot) X = Extra 30m hold-up ( slot) utput Voltage Codes ee utput Module Voltage/Current ables for tandard Modules Voltage Code Paralleling ptions 0 = No Parallel ption -9 = ee Parallel Code able pecial ptions Z = No ptions R = Reverse air N = Not used G = Global enable F = Fan Idle w/inhibit H = pt R + pt G I = pt R + pt F J = pt G + pt F K = pt R + G + F C = CANBU/R485 (73-544-00) 2 B = UB (73-546-00) 2 ingle utput Dual utput 4 riple utput Module Code Module Code 2 3 5 5 6 6 6 2 V A 35 A 60 A 20 A - 0 A - - 2 A 2.2 V B 35 A 60 A 20 A - 0 A - - 2 A 3 V C 35 A 60 A 20 A - 0 A - - 2 A 3.3 V D 35 A 60 A 20 A - 0 A - - 2 A 5 V E 35 A 60 A 20 A 0 A 0 A - - 2 A 5.2 V F 35 A 60 A 5 A - 0 A - - 2 A 5.5 V G 34 A 58 A 09 A - 0 A - - 2 A 6.0 V H 23 A 42 A 78 A - 0 A - - 2 A 8.0 V I 20 A 36 A 68 A - - A A A 0 V J 8 A 32 A 60 A - - A A A V K 7 A 3 A 54.5 A - - A A A 2 V 7 A 30 A 50 A 0 A 4 A A A A 4 V M 4 A 2 A 40.5 A 9 A 4 A A A A 5 V N 4 A 20 A 39 A 8 A 4 A A A A 8 V A 9 A 33.3 A - - - 0.5 A 0.5 A 20 V P 0.5 A 8 A 30 A - - - 0.5 A 0.5 A 24 V Q 8.5 A 5 A 23.5 A 4 A 2 A - 0.5 A 0.5 A 28 V R 6.7 A 2.8 A 2.4 A 3 A 2 A - 0.5 A 0.5 A 30 V 6.5 A 2 A 20 A - - - - - 33 V 6.2 A 0.9 A 8.2 A - - - - - 36 V U 5.8 A 0 A 6.6 A - - - - - 42 V V 4.2 A 7.5 A 2.5 A - - - - - 48 V W 4.0 A 7.5 A 2.5 A - - - - - 600 W 54 V X 3.7 A 6.0 A A - - - - - 60 V Y 3.5 A 6.0 A 0 A - - - - - ) Certifications pending. 2) nly the input parameters will have communications capabilities with these options. Non-intelligent modules do not provide communication capabilities on the output side. 3) Increments of current not shown can be achieved by paralleling modules. ee Parallel Code able. 4) otal output power on dual and triple modules must not exceed the max output power rating for the module. Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions. 75
Power upplies Parallel Code able Parallel Code H30 & 3H3 H45 & 3H5 lot No. Possible Configurations (Modules in Watts) lot No. Possible Configurations (Modules in Watts) & 2 20-20; 20-44; 44-44 & 2 AC 4 3 2 0 9 20-20; 20-44; 44-44 2 2 & 3 360-360; 360-20; 360-44; + above 2 & 3 360-360; 360-20; 360-44; + above 3 3 & 4 4 4 & 5 750-360; 750-20; 750-44; 20-20; 20-44; 44-44 500-20; 500-44; 20-20; 20-44; 44-44; 360-20; 360-44 3 & 4 4 & 5 750-750; 750-360; 750-20; 750-44; 20-20; 20-44; 44-44 500-500; 500-750;500-360; 500-20; 500-44; 20-20; 20-44; 44-44; 360-360; 360-20; 360-44 5 3, 4, & 5 750-20-20; 750-20-44; 750-44-44 3, 4, & 5 750-20-20; 750-20-44; 750-44-44 6 4 & 6 500-500; 500-750 - - 7 4, 5, & 6 500-20-20; 500-20-44; 500-44-44 4, 5, & 6 500-20-20; 500-20-44; 500-44-44 8 3 & 6 750-750 4, 5, & 9 500-500-500; 500-500-750; 500-500-360; 500-500-20; 500-500-44 9 & 6 500-500; 500-360; 500-44 4, 5 & 9; 2 & 3 500-500-500-360; 500-500- 500-20; 500-500-500-44 0 3 & 4; 8 & 9 750-20 & 750-20 4 & 5; & 2 500-500 & 750-750 3, 4 & 6 750-360-750 6 & 7; 3, 4, & 2 750, 750, 360, 750, 750 2 3, 4, 6; 8 & 9 750, 360, 750, 20 3, 4,, & 2 750, 750, 750, 750 3 7 & 8 360-360 3 & 4; & 2 750-360 & 750-20; 750-750 & 750-750 4 - - 3,4 & 9 5 - - & 2 750-750-750 750-750 6 - - 4 & 5; 9 & 0 500-20 & 20-500 7 - - & 9; 5 & 2 500-750 & 500-750 8 - - 3 & 4; 7 & 8; 9 & 0 750-20 & 750-20 & 20-500 76 9 - - 3, 4 & 9; 6 & 7 AC 4 3 2 0 9 750, 750, 360, 750 Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions.
Power upplies Connector ables able : AC Input 2 3 N ~ H30, H45 2 3 4 3H3 Pin # H30 & H45 AC neutral (DC -) function ~ 3H3 & 3H5 2 AC line (DC +) 2 Chassis (earth) 3 3 ground 4 3 2 Chassis (earth) ~ 3H5 4 ground Barrier type H30: three #6-32 bh screws, 6 in.-lbs. (0.67 n-m) torque H45: three M4 screws, 7 in.-lbs. (0.79 n-m) torque 3H3: four M3 screws, 6 in.-lbs. (0.67 n-m) torque 3H5: three M3.5 screws, 6 in.-lbs. (0.67 n-m) torque able 2: PFC Input Connector (Control & ignals) 6 Connector J Mates with: molex 9042-000 housing Molex 909-20 terminal Connector kit p/n 70-84-004 5 0 Pin # function Input ac K (emitter) 2 Input ac K (collector) 3 Global dc K (emitter) 4 Global dc K (collector) 5 No connection 6 Global inhibit/optional enable logic 0 7 Global inhibit/optional enable logic 8 Global inhibit/optional enable return 9 +5 VB housekeeping (A max) 0 +5 VB housekeeping return able 3: I 2 C Bus utput Connector 0 5 Connector J2 6 Mates with: J phdr-0vs housing jst sphd-002t-p0.5 terminal (for 24 28 AWG wire) jst sphd-00t-p0.5 terminal (for 24 28 AWG wire) or land win 2050s000 housing land win 2053t0P terminal Connector kit p/n 70-84-023 Pin # function 2 No connection 3 4 erial clock signal (C) 5 erial data signal (DA) 6 Address bit 0 (A0) 7 Address bit (A) 8 Address bit 2 (A2) 9 econdary return (GND) 0 5 VCC external bus (A max) able 4: DC utput Connector (ocated on output modules) 6 Connector J 5 0 Mates with: molex 9042-000 housing Molex 909-20 terminal Connector kit p/n 70-84-004 Pin # function + Remote sense (single or dual o/p main) 2 Remote margin/v. program (single o/p) 3 Margin high (single o/p) 4 - Remote sense/margin low (single or dual o/p main) 5 pare 6 Module isolated inhibit (single or dual o/p) 7 Module inhibit return (single or dual o/p) 8 Current share (WP) (single or dual o/p main) 9 + Remote sense V2 (dual o/p, single is spare) 0 - Remote sense V2 (dual o/p, single is spare) utput Module Connections: M4 x 8mm screws for all single output modules; maximum torque is 0 in.-lb. (.3 N-m). M3 x 8mm screws for dual output module; maximum torque is 5 in.-lb. (0.57 N-m). 36W triple output module connector mates with Molex 09-9-0600 housing and Molex 26-60-5060 terminals. Case pecifications 9 8 7 6 Case Dimensions H30 = 5 x 5 x (27 x 27 x 279.4) 9 available slots, ingle-phase Input 90-264 Vac 70-264 Vac 500 W max. 320 W max. 5 4 3 2 3H3 = 5 x 5 x (27 x 27 x 279.4) 9 available slots, hree-phase N/A 70-264 Vac 320 W max. 4 3 2 0 9 H45 = 5 x 8 x (27 x 203.2 x 279.4) 4 available slots, ingle-phase 90-264 Vac 70-264 Vac 800 W max. 4500 W max. 8 7 6 5 4 3 2 3H5 = 5 x 8 x (27 x 203.2 x 279.4) 4 available slots, hree-phase N/A 70-264 Vac 4920 W max. Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions. 77
Power upplies H30 and 3H3 Dimensional Drawings 5.00 ± 0.02 [27.0 5.00 ± 0.02 0.5] [27.0 ± 0.5] 5.00 ± 0.03 [27.0 5.00 ± ± 0.03 0.9] [27.0 ± 0.9] UB PRGRAMMING CNNECR UB PRGRAMMING CNNECR PFC INPU CNNECR PFC INPU CNNECR I 2 C BU UPU CNNECR I 2 C BU UPU CNNECR J 5 0 J2 6 J 5 0 J2 6 5 6 0 5 6 0 DC K DC K AC K AC K REVERE REVERE AIRFW AIRFW DIRECIN DIRECIN NRMA NRMA AIRFW AIRFW DIRECIN DIRECIN AC AC INPU INPU.00.00 ± ± 0.05 0.05 [279.40 [279.40 ±.27].27] M4 MG HE (4X). ee Connectors able for screw types. 2. Chassis material: aluminum with chemical film coating (conductive). 3. All dimensions are in millimeters and inches, and are typical. 4. Customer mounting - 3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.55 (4.0mm). Max. torque: 5in-lbs. (0.57N-m). 78 Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions.
Power upplies H45 and 3H5 Dimensional Drawings 8.00 ± 0.02 [203.2 ± 0.5] 5.00 ± 0.03 [27.0 ± 0.9] UB PRGRAMMING CNNECR PFC INPU CNNECR I 2 C BU UPU CNNECR 0 J2 6 5 J 5 6 0 DC AC K K REVERE AIRFW DIRECIN NRMA AIRFW DIRECIN.00 ± 0.05 [279.4 ±.27] AC INPU M4 MG HE (4X). ee Connectors able for screw types. 2. Chassis material: aluminum with chemical film coating (conductive). 3. All dimensions are in millimeters and inches, and are typical. 4. Customer mounting - 3 sides M4, bottom also includes 8-32 mounting holes. Max. penetration is 0.55 (4.0mm). Max. torque: 5in-lbs. (0.57N-m). Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions. 79
Power upplies Intelligent Modules Dimensional Drawings ingle 20 Watt.44 (.2) 2x.63.33 (6.0) (8.5) ingle 360 Watt M4x8 screws with conical washer.38 (35.).48 (2.).44 (.2).44" (.4) M4X8 screws with conical washer V Adj Pin DC utput Connector.48 (2x) (2.).38 (2x) (35.2) Pin.32 (8.) V Adj DC utput Connector.32 (8.) ingle 750 Watt ingle 500 Watt.59 (5.0).63 (6.0).3 + 0.8 59.3 + 0.2 (3x) 3.6 + 0.8 (3x) 5.6 + 0.2.6 (5.6) 2x 8.+ 0.8 DC utput Connector (2x) 5.0 + 0.8 (2x) 6.0 + 0.2.24 (.0) 2x.44 (.0) Pin For Factory-Use nly V Adj (2x) 6.0 + 0.2 M4x8 screw w/ conical washer (6x).32 (8.) M4x8 Pin V Adj screws (4x) DC utput Connector.46 (.7) (4x) Dual 44 Watt riple 36 Watt V Adj V2 Adj.30 (7.5) (3x).7 (29.7).42 (0.7).32 (8.) V2+ V2- M3X8 screws with spring washer (4x) V2 Adj V Adj Pin 2.3 Ref. V2+ V3+ V3 Adj V2+ V2- V2- V3- V3+ V3-. utput Module Connections: All single /P modules are M4 x 8mm screws. Maximum torque:0 in.-lbs. (.3 N-m). Dual /P module is M3 x 8mm screws. Maximum torque: 5 in.-lbs. (0.57 N-m). 2. All output modules have a green DC K ED, (except for 36W module). 3. ee Connectors able 4 for mating connector kits. 80 Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions.
Power upplies Non-Intelligent Modules Dimensional Drawings ingle 20 Watt.44 (.2) (2x) M4x8 screws (2x).48 (2.).38 (35.) V Adj.44 (.2) Pin.32 (8.) ingle 360 Watt.33 (8.5).63 (6.0) M4x8 screws (4x).48 (2.) (2x).44 Pin (.2).38 (35.) V Adj.32 (8.). utput Module Connections: All single /P modules are M4 x 8mm screws. Maximum torque:0 in.-lbs. (.3 N-m). Dual /P module is M3 x 8mm screws. Maximum torque: 5 in.-lbs. (0.57 N-m). 2. All output modules have a green DC K ED, (except for 36W module). 3. ee Connectors able 4 for mating connector kits. Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions. 8
Power upplies Non-Intelligent Modules Dimensional Drawings ingle 600 Watt.59 (5.0).63 (6.0) M4x8 screws (4x).6 (5.6) (2x).44 (.2).24 (3.6) (2x) V Adj.32 (8.) Pin Dual 44 Watt riple 36 Watt.46 (.7) (4x) V Adj 30 (7.5) (3x).7 (29.7).42 (0.7).84 (2.3) V2 Adj Pin DC utput Connector V2+ V2- M3x8 screws (4x) V2 Adj V2+ V2- V3+ V3-.32 (8.) V Adj Pin.48 (2.) V3 Adj. utput Module Connections: All single /P modules are M4 x 8mm screws. Maximum torque:0 in.-lbs. (.3 N-m). Dual /P module is M3 x 8mm screws. Maximum torque: 5 in.-lbs. (0.57 N-m). 2. All output modules have a green DC K ED, (except for 36W module). 3. ee Connectors able 4 for mating connector kits. 82 Visit our website at www.emerson.com or contact echnical ervices at (800) 377-4384 with any questions.