83 HAMMER chisels & breaker steels HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels
SDS plus chisels 84 MORTAR RAKING DP-SDS-MRC DESCRIPTION ; Mortar Raking Chisel - Allows mortar removal without damaging brick - up to window and door frames and behind external pipework. Debris is in chunks as opposed to dust. Carbide tipped for long life with cranked body. USE ME FOR ; All types of mortar and all depths of mortar. Use in conjunction with an SDS Plus machine with roto-stop. WITH CARbIDE TIPS COPPER brazed TIPS BRICK REMOVAL DP-SDS-BRC DESCRIPTION ; brick Removing Chisel - allows removal of whole bricks without damaging them and the bricks around them. Long blade allows penetration to full brick depth with carbide tips for long life and a flat narrowed end. USE ME FOR ; All types of mortar and all depths of mortar. Use in conjunction with an SDS Plus machine with roto-stop. WITH CARbIDE TIPS COPPER brazed TIPS TILE REMOVAL DP-SDS-TRC DESCRIPTION ; Tile Removing Chisel - Angled blade ensures impact energy is exerted underneath the tile and not into the floor / wall. Can be used to remove adhesive and plaster. Cranked - wide head. USE ME FOR ; All types of tile, plaster and adhesives. Use in conjunction with an SDS Plus machine with roto-stop. haer chisels for masonry materials DESCRIPTION PART NO / LIST MORTAR RAkING CHISEL DP-SDS-MRC 31.45 brick REMOVING CHISEL DP-SDS-bRC 52.45 TILE REMOVING CHISEL DP-SDS-TRC 26.96 CHANNELLING CHISEL - 30MM DP-SDS-CC30 60.39 CHANNELLING CHISEL - 55MM DP-SDS-CC55 66.86 CHANNELLING CHISEL - 20MM DP-SDS-CC20-EXT 62.62 RAkING CHISEL - 30MM DP-SDS-RC30 64.70 RAkING CHISEL - 55MM DP-SDS-RC55 70.89 SCUTCH COMb HOLDER - 30MM DP-SDS-SC-HOLDER 48.25 SCUTCH COMb DP-SDS-SC 1.73 ORDER LINE; 01909 552470 www.duro-diamonds.com
SDS plus chisels85 CHANNELLING DP-SDS-CC30 / 55 / 20-EXT DESCRIPTION ; Channelling Chisels - quickly produce channels for cable runs etc. Dust doesn t become airborne as tends to be in chunks. Can be used in conjunction with a wall chasing machine. USE ME FOR ; Medium density block and soft brick. Options for standard conduit (30) / capping runs (55) and channelling behind skirting with long neck version (20). Use in conjunction with an SDS Plus machine with roto-stop. - HAMMER ACTION MACHINED HEAD 30MM, 55MM AND 20MM RAKING DP-SDS-RC30 / 55 DESCRIPTION ; Carbide Tipped Raking Chisels - for general masonry work in hard materials e.g channel chasing in engineering bricks. Carbide tipped for long life. 30 and 55 options with flat - narrowed ends. USE ME FOR ; All types of brick and masonry including engineering brick. Also concrete. Use in conjunction with an SDS Plus machine with roto-stop. WITH CARbIDE INSERT COPPER brazed INSERT bond SCUTCH COMB DP-SDS-SC / SC-HOLDER DESCRIPTION ; Scutch Comb Chisel - Allows scutching operations using SDS plus machines instead of hand held. Interchangeable scutch ends mean no sharpening is necessary. Can also be used with droves. USE ME FOR ; All types of masonry - dressing, chasing etc. Multi purpose tool, extremely versatile. Use in conjunction with an SDS Plus machine with roto-stop. SEPARATE SCUTCH INSERTS SDS PLUS CHISELS USER HINTS & TIPS 1 2 3 4 5 6 ALWAYS GREASE SDS PLUS SHANkS before AND DURING USE. THIS WILL REDUCE HEAT build UP AND REDUCE WEAR ON THE MACHINE AND THE CHISEL ITSELf. before USING ANY SDS PLUS MACHINE - CHECk THAT IT HAS A HAMMER ACTION ONLY MODE AND ENSURE THIS IS ENGAGED before USING THE CHISEL. DO NOT USE ON A MACHINE THAT DOES NOT HAVE THIS OPTION. CHANNELLING CHISELS (DP-SDS-CC30/55/20) CAN be RESHARPENED If THEY become blunt. USE A GRINDER OR A GOOD QUALITY file. RAkING CHISELS ARE DESIGNED TO HAVE A SHORTER LENGTH IN ORDER TO TRANSMIT AS MUCH POWER AS POSSIbLE. for SCUTCH COMb HOLDERS - keep SCUTCH COMb TEETH (OR DROVES) IN CONTACT WITH THE MATERIAL AT ALL TIMES TO STOP THE COMb being LEVERED OUT Of THE COMb HOLDER. MORTAR RAkING, TILE REMOVING AND CHANNELLING CHISELS INCORPORATE CRANkED SHAfTS TO ENSURE THAT THE MACHINE IS ANGLED AWAY from THE MATERIAL being WORkED ON.
SDS plus POINTs & chisels 86 CHISEL DP-SDS-CHISEL DESCRIPTION ; SDS Plus Chisel - General purpose masonry work, 20 wide with 250 overall length USE ME FOR ; All types of brick and masonry including engineering brick. Also concrete. flat CHISEL HEAD - 20MM wide CHISEL DP-SDS-SCHISEL DESCRIPTION ; SDS PLUS Scaling Chisel - General purpose masonry work, 40 wide with 250 overall length. USE ME FOR ; All types of brick and masonry including engineering brick. Also concrete. flat CHISEL HEAD - 40MM EXTRA WIDE CHISEL DP-SDS-EWC DESCRIPTION ; Extra wide 80 blade for general purpose masonry work including chopping out electrical back boxes to size. 150 overall length. USE ME FOR ; Medium density block, soft brick through to engineering brick. WIDE flat CHISEL HEAD - 80MM haer chisels for masonry materials DESCRIPTION PART NO / LIST SDS PLUS CHISEL DP-SDS-CHISEL 7.24 SDS PLUS SCALING CHISEL DP-SDS-SCHISEL 9.40 SDS PLUS EXTRA WIDE CHISEL DP-SDS-EWC80 23.45 SDS PLUS POINT DP-SDS-POINT 7.24 ORDER LINE; 01909 552470 www.duro-diamonds.com
SDS plus POINTs & chisels87 POINT DP-SDS-POINT DESCRIPTION ; SDS Plus Point - General purpose masonry work, especially useful for chopping out drilled core holes. 250 overall length. USE ME FOR ; All types of brick and masonry including engineering brick. Also concrete. STRAIGHT CHISEL POINT SDS PLUS CHISELS USER HINTS & TIPS 1 2 3 4 5 6 ALWAYS GREASE SDS PLUS SHANkS before AND DURING USE. THIS WILL REDUCE HEAT build UP AND REDUCE WEAR ON THE MACHINE AND THE CHISEL ITSELf. before USING ANY SDS PLUS MACHINE - CHECk THAT IT HAS A HAMMER ACTION ONLY MODE AND ENSURE THIS IS ENGAGED before USING THE CHISEL. DO NOT USE ON A MACHINE THAT DOES NOT HAVE THIS OPTION. CHANNELLING CHISELS (DP-SDS-CC30/55/20) CAN be RESHARPENED If THEY become blunt. USE A GRINDER OR A GOOD QUALITY file. RAkING CHISELS ARE DESIGNED TO HAVE A SHORTER LENGTH IN ORDER TO TRANSMIT AS MUCH POWER AS POSSIbLE. for SCUTCH COMb HOLDERS - keep SCUTCH COMb TEETH (OR DROVES) IN CONTACT WITH THE MATERIAL AT ALL TIMES TO STOP THE COMb being LEVERED OUT Of THE COMb HOLDER. MORTAR RAkING, TILE REMOVING AND CHANNELLING CHISELS INCORPORATE CRANkED SHAfTS TO ENSURE THAT THE MACHINE IS ANGLED AWAY from THE MATERIAL being WORkED ON.
SDS MAX chisels 88 point DP-SMAX-POINT DESCRIPTION ; Point. General purpose masonry work, especially useful when chopping out drilled core holes. Option 1-360 overall length / Option 2-500 overall length. USE ME FOR ; All types of brick and masonry including engineering brick. Also concrete. Use in conjunction with an SDS Plus machine with roto-stop. STRAIGHT - CHISEL POINT chisel DP-SMAX-CHISEL DESCRIPTION ; CHISELS - general purpose masonry work. 25 wide chisel end. Option 1-360 overall length / Option 2-500 overall length. USE ME FOR ; All types of brick and masonry including engineering brick. Also concrete. Use in conjunction with an SDS Plus machine with roto-stop. STRAIGHT - flat CHISEL EXTRA WIDE CHISEL DP-SMAX-EWC DESCRIPTION ; Extra Wide Chisel - Extra wide 50 & 80 blade for general purpose masonry work including chopping out electrical back boxes to size. (80 only). USE ME FOR ; Medium density block / Soft brick through to engineering brick (50 options - 400 overall length / 80 options - 300 overall length) STRAIGHT - flat WIDE CHISEL haer chisels for masonry materials DESCRIPTION PART NO / LIST SDS MAX POINT - 360MM DP-SMAX-POINT360 13.54 SDS MAX POINT - 500MM DP-SMAX-POINT500 19.14 SDS MAX CHISEL - 360MM DP-SMAX-CHISEL360 13.54 SDS MAX CHISEL - 500MM DP-SMAX-CHISEL500 19.14 SDS MAX WIDE CHISEL - 50MM DP-SMAX-EWC50 23.90 SDS MAX WIDE CHISEL - 80MM DP-SMAX-EWC80 26.15 SDS MAX brick REMOVING CHISEL DP-SMAX-bRC 70.09 SDS MAX CLAY SPADE DP-SMAX-CSPADE 91.66 SDS MAX SCUTCH COMb HOLDER DP-SMAX-SCHOLDER 58.23 SDS SCUTCH COMbS DP-SDS-SC 1.73 ORDER LINE; 01909 552470 www.duro-diamonds.com
SDS MAX chisels89 BRICK REMOVAL DP-SMAX-BRC DESCRIPTION ; brick Removing Chisel. Allows removal of whole bricks without damaging them and the bricks around them. Long blade allows penetration to full brick depth with carbide tips for long life. USE ME FOR ; All types of mortar and all depths of mortar. Use in conjunction with an SDS Max machine with roto-stop. - CARbIDE INSERTS COPPER brazed flat - NARROWED END CLAY spade DP-SMAX-CSPADE DESCRIPTION ; Purpose designed blade for cutting / digging of bolder clay. USE ME FOR ; favoured by tunnelling contractors and companies specialising in under pinning in clay conditions. Also excellent for general garden and landscaping. flat - WIDE SHOVEL HEAD SCUTCH HOLDER DP-SMAX-SC-HOLDER DESCRIPTION ; Allows scutching operations using SDS MAX machines instead of hand held. Interchangeable end mean no sharpening is necessary. Can also be used with droves. USE ME FOR ; All types of masonry - dressing, chasing etc. Multi purpose tool, extremely versatile. SEPARATE SCUTCH INSERTS SDS MAX CHISELS USER HINTS & TIPS 1 2 3 4 ALWAYS GREASE SDS MAX SHANkS before AND DURING USE. THIS WILL REDUCE HEAT build UP AND REDUCE WEAR ON THE MACHINE AND THE CHISEL ITSELf. before USING ANY SDS MAX MACHINE - CHECk THAT IT HAS A HAMMER ACTION ONLY MODE AND ENSURE THIS IS ENGAGED before USING THE CHISEL. DO NOT USE CHISELS ON A MACHINE THAT DOES NOT HAVE THIS OPTION. for SCUTCH COMb HOLDERS - keep SCUTCH COMb TEETH (OR DROVES) IN CONTACT WITH THE MATERIAL AT ALL TIMES TO STOP THE COMb being LEVERED OUT Of THE COMb HOLDER. SDS MAX POINTS, CHISELS AND EXTRA WIDE CHISELS CAN be RESHARPENED.
SDS MAX STEM & ADAPTOR 90 stem DP-SMAX-STEM DESCRIPTION ; floor Cleaning Pad - Stem - To be used in conjunction with tamping pads. USE ME FOR ; Attaching to the type of pad selected to suit the compaction operation required, whether this be for back filling following emergency repairs to services or compaction of mould in industrial applications. STRAIGHT WITH k-taper STEM END MAX TO PLUS DP-SMAX-SDS-AD DESCRIPTION ; SDS MAX TO SDS PLUS ADAPTOR - Allows SDS Plus drill bits, chisels and accessories to be used in SDS Max machines - giving it flexibility of user options. USE ME FOR ; Dependent on drill or accessory inserted. HAMMER AND ROTARY ACTION haer chisels for masonry materials DESCRIPTION PART NO / LIST SDS MAX STEM DP-MAX-STEM 34.51 SDS MAX PLUS TO MAX ADAPTOR DP-SMAX-SDS-AD 61.50 ORDER LINE; 01909 552470 www.duro-diamonds.com
BREAKER STEELS - KEY91 CODE DESCRIPTION CODE 1 MOIL POINT 2 DESCRIPTION NARROW CHISEL Drop forged from high grade steel, this Haer Iron with heat treated work areas is used for demolition work and starting holes in the centre of a concrete slab. The most coon of the demolition steels used for general breaking where there is not a requirement to control the line of fracture. 3 WIDE CHISEL / BOLSTER CHISEL 4 Narrow chisel used in a similar way to the moil point but the line of fracture is controlled along the line of the chisel end. Used on applications where it is important to have a clean edge retained on the work-piece to be broken. 115 WIDE TARMAC CUTTER Wide chisel or bolster chisel used in a similar way to the moil point but the line of fracture is controlled along the line of the chisel end. Used on applications where it is important to have a clean edge retained on the work-piece to be broken. 5 CLAYSPADE 6 Tarmac Cutter used for cutting of coated stone. The wedge shape of the side profile is preferred by many operators as it facilitates easy removal of the blade after each cut. WIDE ASPHALT CUTTER Clayspade is a purpose designed blade for cutting / digging of boulder clay. The geometry facilitates the cutting action to return to an open face. If the edge is damaged during use it will destroy the natural scooping action. This tool is favoured by tunnelling contractors and companies specialising in underpinning in clay conditions. Also excellent for general garden and landscaping. 7 TAMPING PAD - 180 dia 8 Asphalt Cutter similar in application to the Tarmac Cutter but has the benefit of a thinner parallel side profile and radius on the blade allowing faster penetration in the cutting action. Suitable for lighter weight and less powerful breakers. STEM - Use with 180 dia tamping pad Floor compaction tool. 9 POINT 10 These tools need to be used together the stem can have a number of shank configurations to suit both Pneumatic and Electric powered breakers. The pad is selected to suit the type of compaction operation required whether this be for back filling following emergency repairs to services or compaction of mould in industrial applications. SCUTCH COMB HOLDER The most coon of the demolition steels used for general breaking where there is not a requirement to control the line of fracture. 11 FLOOR CLEANING TOOL 12 Allows scutching operations using power tools instead of hand held. Interchangeable scutch ends mean no sharpening is necessary. Can also be used with droves. Stem - Use with floor cleaning tools and pads Floor Cleaning Tool used in conjunction with a shank to suit the type of breaker to be used. It has a flexible replacement blade held in place by retaining bolts and can be used for the removal of lino tiles or debris spilt on to concrete floors prior to finishing. Stem for floor cleaning tool is available with different shank types and facilitates the use of the smaller electric tamping pads and especially the floor cleaning tool. HOW TO SELECT YOUR DURO BREAKER STEEL 1 2 CHOOSE THE KIND OF APPLICATION YOU NEED TO UNDERTAKE AND THEREFORE THE BREAKER STEEL TYPE YOU NEED TO ACHIEVE THIS FROM THE LIST ABOVE. THEN SELECT THE MACHINE TYPE YOU WILL BE USING FROM THE SELECTION OF PNEUMATIC AND ELECTRIC ACROSS PAGES 90-94 FOR EXAMPLE: 75MM WIDE CHISEL REQUIRED TO BE USED WITH A 32X160 HEX SHANK BREAKER
PNEUMATIC AND HYDRAULIC - hex shank breaker steels 92 32 X 160MM (1-¼" x 6-¼") HEX SHANk Moil point - 380 under collar 32.0x160HX-MP380 27.72 Moil point - 450 under collar 32.0x160HX-MP450 29.66 Narrow chisel - 380 under collar 32.0x160HX-NC380 27.72 Narrow chisel - 450 under collar 32.0x160HX-NC450 29.66 75 wide chisel 32.0x160HX-75WC380 49.29 115 wide Tarmac Cutter 32.0x160HX-115WTC300 56.40 Clayspade - 135 x 205 blade 32.0x160HX-135x205S 95.54 Stem for use with 180 Pad 32.0x160HX-STEM 56.99 28 X 160MM (1-1/8" x 6-¼") HEX SHANk Moil point - 380 under collar 28.0x160HX-MP380 27.72 Moil point - 450 under collar 28.0x160HX-MP450 29.66 Narrow chisel - 380 under collar 28.0x160HX-NC380 27.72 Narrow chisel - 450 under collar 28.0x160HX-NC450 29.66 75 wide chisel 28.0x160HX-75WC380 49.29 115 wide Tarmac Cutter 28.0x160HX-115WTC300 56.40 25 X 108MM (1" x 4-¼") HEX SHANk Moil point - 380 under collar 25.0x108HX-MP380 27.72 Moil point - 450 under collar 25.0x108HX-MP450 29.66 Narrow chisel - 380 under collar 25.0x108HX-NC380 27.72 Narrow chisel - 450 under collar 25.0x108HX-NC450 29.66 Tarmac cutter - 115 wide 25.0x108HX-115WTC300 56.40 22 X 82MM (7/8" x 3-¼") HEX SHANk Moil Point - 380 under collar 22.0x82HX-MP380 27.72 Moil Point - 450 under collar 22.0x82HX-MP450 29.66 Narrow chisel - 380 under collar 22.0x82HX-NC380 27.72 Narrow chisel - 450 under collar 22.0x82HX-NC450 29.66 125 Wide Asphalt Cutter - 300 under collar 22.0x82HX-125WTC300 56.40 Clayspade - 100 X 160 blade 22.0x82HX-CS 84.74 MOIL POINT NARROW CHISEL WIDE / BOLSTER CHISEL WIDE TARMAC CUTTER TAMPING PAD tamping pad STEM ORDER LINE; 01909 552470 www.duro-diamonds.com
PNEUMATIC AND HYDRAULIC - hex & ROUND shank BREAKER STEELS 93 19 X 50MM (¾" x 2") HEX SHANk Moil point - 250 under collar 19.0x50HX-MP250 18.88 Narrow chisel - 250 under collar 19.0x50HX-NC250 18.88 60 Wide Chisel - 230 under collar 19.0x50HX-60WC230 29.05 25 X 75MM ROUND SHANk Moil point - 330 under collar 25.0X75RS-MP330 27.72 Narrow chisel - 330 under collar 25.0X75RS-NC330 27.72 CP9S SHANK ball RETAINER CHUCk Point - 250 o/a length CP9S-P250 13.85 Narrow chisel - 250 o/a length CP9S-NC250 13.85 75 wide chisel - 250 o/a length CP9S-WC250 32.35 an extensive range of breakers available from our sister company yokota uk unrivalled quality and market leading tool life supported by comprehensive service and support three exclusive brands lightweight haers heavy duty haers paving breakers rock drills POINT WIDE ASPHALT CUTTER SCUTCH Comb holder CLAYSPADE FLOOR CLEANING TOOLS floor cleaner STEM
KANGO & HILTI ELECTRIC breaker steels 94 KANGO 900/950 Moil point - 380 o/a length k900/950-mp380 11.86 Moil point - 450 o/a length k900/950-mp450 13.48 Narrow chisel - 380 o/a length k900/950-nc380 11.86 Narrow chisel - 450 o/a length k900/950-nc450 13.48 50 wide chisel - 300 o/a length k900/950-50wc300 20.49 75 wide chisel - 300 o/a length k900/950-75wc300 21.57 Stem for floor cleaning tool - 275 o/a k900/950-stem 24.80 Clayspade - 100 x 165 blade k900/950-cspade 70.09 Scutch comb holder k900/950-scholder 48.53 HILTI 905 & 1000 Moil point - 500 o/a length H905/1000-MP500 29.66 Narrow chisel - 500 o/a length H905/1000-NC500 29.66 75 wide chisel - 300 o/a length H905/1000-75WC300 52.31 Clayspade - 100 x 165 blade H905/1000-CSPADE 80.13 Stem for floor cleaning tool 275 o/a length H905/1000-STEM 40.44 150 HILTI 3000 28 Moil point - 520 o/a length H3000-MP520 52.31 Narrow chisel - 520 o/a length H3000-NC520 52.31 MOIL POINT NARROW CHISEL WIDE / BOLSTER CHISEL WIDE TARMAC CUTTER TAMPING PAD tamping pad STEM ORDER LINE; 01909 552470 www.duro-diamonds.com
BOSCH ELECTRIC BREAKER STEELS 95 75 BOSCH 11205 37 35 16.5 Moil point - 380 o/a length b11205-mp380 15.10 Narrow chisel - 380 o/a length b11205-nc380 15.10 65 85 28 BOSCH 11304 USH 27 Moil point - 450 o/a length b11304-mp450 25.56 Narrow chisel - 450 o/a length b11304-nc450 25.56 Tarmac cutter 115 wide b11304-115wtc 77.64 an extensive range of breakers available from our sister company yokota uk unrivalled quality and market leading tool life supported by comprehensive service and support three exclusive brands lightweight haers heavy duty haers paving breakers rock drills POINT WIDE ASPHALT CUTTER SCUTCH Comb holder CLAYSPADE FLOOR CLEANING TOOLS floor cleaner STEM
KANGO & HILTI ELECTRIC breaker steels 96 ACCESSORIES PADS / BUSH HAMMER HEADs / TOOLS 180 dia k-taper tamping pads for electric haer stems 180MM DIAMETER PAD 123.26 floor cleaning tool for use with electric haer stems floor CLEANING TOOL 140.19 Spare 2 blade for floor cleaning tool CLEAN TOOL blade 30.74 bush Haer Head for use with 50 bush Haer H d 24.60 H905 / SMAX / k900 Stems N.b Not to be used with a HILTI TE500 or equivalent power machine - these machines are too powerful for this product an extensive range of floor scrapers available from our sister company yokota uk unrivalled quality and market leading tool life supported by comprehensive service and support three exclusive brands ORDER LINE; 01909 552470 www.duro-diamonds.com