Our technology. Your success. Pumps n Valves n Service Calio SI First and only circulator designed and produced in Turkey
02 Introduction Made in Turkey: Save costs with Calio SI and KSB KSB offers you a unique full-range programme for heating, ventilation and air-conditioning. Our range comprises pumps, valves, automation solutions, drives and actuators. From our perfectly matched high-efficiency components we will select the right solution for your requirements and offer you all the services you may need. Best technology, best price/performance ratio Get to know Calio SI, our unique high-efficiency circulator, developed in close cooperation with OEMs as a perfect match for your requirements. KSB is the first and only manufacturer to produce a high-efficiency circulator in Turkey for the Turkish market. You will not only benefit from this established high-quality KSB pump but also from an exclusive price advantage saving all customs duties and import taxes. Trust in a reliable partner and a powerful product: the only stand-alone OEM high-efficiency circulator designed and produced in Turkey.
03 113,7 137,8 98 104 130 G1" Applications: Heating and air-conditioning systems, industrial plants: One-pipe and two-pipe systems Underfloor heating systems Boiler or primary circuits Storage tank circuits Solar power systems Heat pumps Kit systems Technical data Flow rate Up to 3.6 m 3 /h Head Up to 7.5 m Fluid temperature 0 to +110 C Ambient temperature in the boiler 0 to +70 C Operating pressure Up to 10 bar Sound pressure level < 45 db Pipe connections R 1/2, R1
04 Flexibility Three pump variants, one benefit: maximum flexibility Experience the best in flexibility Calio SI has three different modes of operation: automatic mode with constant-pressure or proportional-pressure control, open-loop control with manual setpoint input, and closed-loop control with PWM. As a pump which has been designed precisely for your needs, Calio SI meets all requirements of HVAC applications. Depending on the mode of operation, KSB s stand-alone high-efficiency circulators come with different control options. They can be controlled via an easily accessible control panel or via a PWM signal. This selection ensures that the product is easy to operate and suited to a large range of applications. Calio SI can be installed in pre-assembled pump groups as well as on the supply side of heating systems. Pump sizes at a glance Size Motor Length (mm) EEI < Calio SI HMI/Dual/EcoMatch 15-50-130 33 W 130 0.20 Calio SI HMI/Dual/EcoMatch 15-70-130 52 W 130 0.20 Calio SI HMI/Dual/EcoMatch 25-50-130 33 W 130 0.20 Calio SI HMI/Dual/EcoMatch 25-50-180 33 W 180 0.20 Calio SI HMI/Dual/EcoMatch 25-70-130 52 W 130 0.20 Calio SI HMI/Dual/EcoMatch 25-70-180 52 W 180 0.20
05 Overview of pump variants with different control options Pump Control options Characteristics Modes of operation Calio SI HMI Control panel The reliable solution with manual control settings: The pump is controlled via buttons and LEDs on the control panel. 4 proportional-pressure control curves 4 constant-pressure control curves 5 constant curves Automatic proportional-pressure control Automatic constant-pressure control External control mode with 0-10 V This flexible solution unites two control concepts: Calio SI Dual PWM and control panel Pump is controlled by PWM or via buttons and LEDs on the control panel. PWM return signal for power input, alarm messages and operating status. External control mode with PWM signal or 0-10 V Calio SI EcoMatch PWM and control panel The smart solution with EcoMatch function for automatic, energy-efficient operation: Pump is controlled by PWM or via buttons and LEDs on the control panel. EcoMatch automatically determines the optimum characteristic curve. 4 proportional-pressure control curves 4 constant-pressure control curves 5 constant curves Automatic proportional-pressure control Automatic constant-pressure control Automatic adaptation with proportional-pressure control Automatic adaptation with constant-pressure control External control mode with PWM signal or 0-10 V All Calio SI pump variants are designed with automatic and manual functions for a flexible and dependable pump operation. Automatic functions: Continuous output adjustment depending on the mode of operation Soft start Full motor protection with integrated trip electronics Automatic rotor deblocking system Manual functions: Setting the mode of operation Setting the differential pressure setpoint Setting the level (open-loop control) Vent plug Deblocking the rotor
06 Benefits Reliable. Efficient. User-friendly. Calio SI is bound to impress Cost-efficient: Made in Turkey: no customs duties and import taxes Maximum savings of operating costs by high-efficiency technology combined with speed control Equipped with a 3-phase stator winding with aluminium wire Easy to operate: 0 to 10 V input to realise a closed-loop control operating mode as standard feature Easy to integrate in Building Management Systems (BMS) Plug & pump: easy to install and operate Control panel with two pushbuttons: move up and down to select the mode of operation One connector for all external control modes Several pump control options (control panel, PWM, 0-10 V, EcoMatch function) Automatic rotor deblocking system Designed with a soft start function Error messages with PWM (standard return signal) Low noise due to 6-pole rotor and optimised minimum cogging torque Economical: High-efficiency wet rotor motor: EEI < 0.2 Future-proof by maximum energy efficiency, exceeding the requirements of energy efficiency regulations such as ErP 2015 Motor efficiency higher than 80 % Maintenance-free
07 Being a reliable full-range supplier, KSB is very familiar with the challenges of HVAC applications. We continuously optimise our products for even better solutions. Calio SI is not only easy to use, it also combines maximum efficiency with top reliability and flexibility. Matched to your requirements, designed for top results: with many decisive benefits for you. Reliable: Use of ferrite magnets to avoid magnetite problems Increased corrosion protection through totally enclosed rotor Full motor protection with integrated trip electronics Glandless pump: no shaft sealing and low friction torque Electric, sensorless, speed-controlled motor, variable speed 2000-4000 rpm Self-cooling rotor assembly Long service life thanks to ceramic bearings High availability due to manual and integrated protective functions Flexible: Broad product range: different pressures and threaded connections 4 constant-pressure curves and 4 proportionalpressure curves Fast supply EcoMatch function for Calio SI EcoMatch: automatic adaptation to system for energy-efficient operation Space-saving: Minimal footprint with electronics, pump and motor forming one assembly
Technology that makes its mark The KSB newsletter don t miss out, sign up now: www.ksb.com/newsletter Your local KSB representative: KSB Aktiengesellschaft Johann-Klein-Strasse 9 67227 Frankenthal (Germany) www.ksb.com You can also visit us at www.ksb.com/socialmedia 1157.0214-EN / 04.16 / KSB Aktiengesellschaft 2016 Subject to technical modification without prior notice.