ArioPrint
ArioPrint The Digital Revolution ArioPrint is the digital textile printing machine designed and produced by Arioli. The ongoing research for new technical solutions, combined with Arioli experience in finishing process, has enabled the production of a scan machine for digital textile printing, designed for printers needs. Technical Specifications Printable width Media thickness Print-head type Head configuration Resolution Ink type Number of colors Rip Software Belt glue type Belt washing Belt drying Electrical power installed Voltage Frequency Nominal compressed air pressure Maximum water flow rate Up to 2000 mm Up to 40 mm Kyocera double color 300 dpi native resolution 16 heads (4 lines, 8 colors per line) From 300 to 1200 dpi Reactive, acid, disperse Till 8 colors Open specifications to all Rip software-houses Permanent Inverter controlled brush Double squeegees and air blade 28 kw 380 V 50 Hz three phases 6 bar 18 20 l/min 2944 mm 114 mm 880 mm 2460 mm 780 mm 3986 mm* 1257 mm 10813 mm * Dryer: two industrial chambers, with single pass (3986 mm length) Dryer can be supplied with one industrial chamber, with triple pass (1986 mm length)
ArioPrint The Digital Revolution ArioPrint is the digital textile printing machine designed and produced by Arioli. The ongoing research for new technical solutions, combined with Arioli experience in finishing process, has enabled the production of a scan machine for digital textile printing, designed for printers needs. Beam Printing carriage Fixed to the monolithic structure by means of joints and extremely resistant tie-rods, the beam guarantees maximum linearity in the printing carriage movement and precision in the fabric/printing head distance across the printing area. The stiffness of the steel monolithic structure ensures essential precision for optimum printing results guaranted over time. The printing carriage is designed to support Kyocera Bi-Colour heads (KJ4B), arranged in four rows. The possible modes are: Mono-Directional, Bi-Directional and Multi-pass. The complete configuration of the printing carriage covers a 45 cm print step. The possible resolutions vary from 300x300 dpi to 1200x1200 dpi, passing through all the possible combinations. The Multi-pass mode also allows printing the most critical patterns that usually bring out defects (for example banding). Technical Specifications Printable width Up to 2000 mm Aramidic fiber belt Media thickness Up to 40 mm Print-head type Kyocera double color 300 dpi native resolution Head configuration 16 heads (4 lines, 8 colors per line) The aramidic fiber belt and its unique positioning system by means of a very high resolution encoder, guarantees highly precise fabric feeding enabling achievement of high quality printing. Resolution From 300 to 1200 dpi Ink type Reactive, acid, disperse Number of colors Till 8 colors Rip Software Open specifications to all Rip software-houses Belt glue type Permanent Belt washing Inverter controlled brush Belt drying Double squeegees and air blade Electrical power installed 28 kw Voltage 380 V Inlet system Frequency 50 Hz three phases Nominal compressed air pressure 6 bar Maximum water flow rate 18 20 l/min The Arioli fabric feed device is versatile and compact, capable of handling both knitted fabric (with light dance roll) and woven fabric (with pneumatic piston dance roll). Furthermore the system is able to handle the small roll (Ø max 38 cm) as well as the jumbo roll by means of a specific de-roller. Color cabin The ink tanks are positioned laterally on the machine in order to facilitate the refilling activities. Speed is nothing without PRECISION Washing and Blowing system 2944 mm The air blade blow system acting on the aramidic belt is studied and positioned to avoid drops of water falling on the surface of the fabric. Optical fibers 114 mm 880 mm 2460 mm 780 mm 10813 mm * Dryer: two industrial chambers, with single pass (3986 mm length) Dryer can be supplied with one industrial chamber, with triple pass (1986 mm length) 3986 mm * 1257 mm The use of optical fibers permits obtaining high speed as well as high quantity data transfer between the PC and the printing heads. Moreover, thanks to the technology used, ArioPrint is not affected by classical electromagnetic interferences, thus avoiding possible data transmission problems and consequent interruptions/printing errors. Hardware and software programming Developed internally by Arioli, the hardware and software planning and programming system allow an easy and intuitive use of the ArioPrint machine.
ArioPrint productivity Resolution [dpi] 300x300 600x600 900x900 1200x1200 Printing mode Mono-Directional/Bi-Directional/Multi-pass Productivity [m 2 /h] 30 khz 1000 433 218 122 20 khz 900 346 148 90 Printing width [mm] 2000 Printed width: 1.5 mt Frequency 30 KHz maximum drop 12* picoliter Frequency 20 KHz maximum drop 18* picoliter Resolution mt / h mt / h 300x300 535 474 600x600 250 200 900x900 144 107 1200x1200 90 60 300x600 320 280 300x900 230 305 300x1200 185 160 600x300 440 360 600x900 180 145 600x1200 145 110 900x300 370 285 900x600 205 155 900x1200 110 78 1200x300 310 230 1200x600 175 120 1200x900 120 80 * Drop size 5/7/12/18 pl
ArioPrint- Arioli - Eng - 12-2017 briefinglab.com Arioli is part of Arioli Group Design and manufacturing of textile finishing, dyeing and printing machinery From local companies, to an attractive international group Arioli S.p.A. via G. P. Clerici, 2-21040 Gerenzano (Va) - Italy +39 02 9639931 +39 02 96399399 arioligroup.com info@arioligroup.com