Plywood structural, building & decorative Performance with quality veneers P laminates P plywood P flooring P timber P trade
Performance with quality Amerind is a leading Australian distributor of premium grade plywood products. Amerind PLYWOOD is found in some of Australia s major buildings providing structural support, as cladding, in formwork, as a decorative element and even in designer furniture. It is also used in boat building and caravan manufacturing. A leading Australian company When you choose from the Amerind PLYWOOD range you know you have the support of Australia s leading independent distributor of panel products and manufacturer of decorative architectural finishes. Since 1970, Amerind has manufactured a range of products in Australia as well as selecting a portfolio of products from overseas. Our product range includes: High quality timber veneers Premio architectural panels (HPL) Colorboard melamine panels (LPM) Solid timber and German engineered laminate flooring Furniture and construction grade timber Plywood, MDF, particle board and block board E0 and FSC approved substrates Our environment Amerind is committed to managing its entire operations in an environmentally responsible manner to ensure the protection of the environment for this and future generations. Responsible forestry and use of forest resources, waste minimisation and pollution prevention are the principles underpinning Amerind s environmental policy. Amerind is certified to maintain the chain of custody in the manufacturing of FSC certified products. National support Over the years, Amerind has created a national network of support for professionals in building, cabinet making, architecture and design. Our team of passionate sales professionals operate from warehouses and offices strategically located in capital cities and regional centres. They provide product, finish and colour advice during project planning while our dedicated distribution centres provide rapid response to customer orders. In addition, product samples, data sheets and information are as close as your computer, telephone and fax.
Plywood for every application Amerind PLYWOOD offers an unsurpassed range that meets virtually every need for construction, cabinet making, acoustic panels, caravan manufacturing, decorative and marine applications. Stress graded Plywood manufactured for use in structural, exterior and marine applications is stress graded to the relevant Australian standards or equivalent. This premium product is achieved using superior timber and quality manufacturing practices. Performance warranty At Amerind we stand by our PLYWOOD and other products and provide them free from manufacture or workmanship defects. This commitment is in addition to compliance with all relevant Australian and international standards. For further details refer to the Amerind website. Low emissions The glues used to create plywood emit volatile organic compounds (VOCs) from the finished product. We select glues that have the lowest level possible of VOC emissions, thus maintaining our commitment to having the least possible impact on the environment. For everything you need fast At Amerind, we understand you need to get your PLYWOOD samples and colour reference fast when you are developing concepts for a new project. That s why our product samples, data sheets and information are as close as your computer, telephone and fax. Go online For colour swatches, Material Safety Data Sheets, Product Specifications and order forms for the samples you need, go online at www.amerind.com.au Order samples If you know what you need, simply email the name and finish of the samples to samples@amerind.com.au or fax to 1300 850 677 Ask questions If you have questions about product information, application suitability and distribution timing, please give us a call on 1300 850 477
Building and construction Structural CD Ply AS/NZS 2269 unprimed primed Structural CD Ply uses A bond exterior glue making this product ideal for structural applications. Structural CD Ply in a C grade face finish could have filled splits or knot holes and is sanded. It can be used where aesthetics are not of significant concern. walls, beams, cabinetry, furniture, building, roofing, bins, boxes, crates, hoardings, structural bracing applications F8, F11, F14 C/D or D/D 2400 x 1200 Local: 7mm, 9mm, 12mm, 15mm, 17mm, 19mm, 21mm, 25mm Imported: 6.5mm, 9mm, 12mm, 15mm, 18mm, 21mm, 25mm eg code: PSTRC120I240120 Structural CD Ply (Local) AFS Structural CD Ply (Imported) EO & PEFC SHADOWclad/Evolution AS/NZS 2269 SHADOWclad/Evolution uses A bond exterior glue making this product ideal for cladding applications. SHADOWclad/Evolution can be used both internally and externally to provide a range of design options for architects and designers. SHADOWclad/Evolution can be treated to provide protection against termites. Finish: Sheet size*: decorative internal and exterior claddings, high visual impact cladding/ lining for public areas, residential or commercial buildings unprimed or primed ungrooved or grooved 1800/2440/2745/3050mm x 1200/1216mm 12mm eg code: Grooved PSHGP120X244121 Ungrooved PSHUP120X244121 *NB: Sizes subject to availability from manufacturer. Disclaimer: Timber and Veneer products are comprised of natural timbers and will react to environmental conditions including temperature, light and moisture. Changes to surface colour or appearance is a natural characteristic and not a defect. As with any natural timber product, variations may occur between samples, displays or printed materials and the product you ultimately obtain. Timber from the same species but different logs or different parts of the same log may exhibit noticeable differences. Amerind Pty Ltd does not provide any warranty that products supplied will not exhibit such variations as described above. All products are sold under Amerind Pty Ltd s Terms & Conditions of Trade. Non Structural CD Ply Non Structural BC Ply Non Structural CD Ply uses A bond exterior glue making this product ideal for a wide range of non-structural applications. It is a cost effective solution when a non-structural plywood is required. walls, cabinetry, furniture, building, roofing, bins, boxes, crates, hoardings C/D 2400 x 1200 eg code: PIMCD120X240120 6.5mm, 9mm, 12mm, 15mm, 18mm, 21mm, 25mm Non Structural BC Ply uses A bond exterior glue making this product ideal for a wide range of non-structural applications. paint grade for walls, cabinetry, furniture, building, roofing, bins, boxes, crates, hoardings B/C 2400 x 1200, 2440 x 1220 3.6mm, 6.5mm, 7mm, 9mm, 12mm, 15mm, 18mm, 21mm, 25mm eg code: PIMBC120X244122 PMELE120X244122 EO & PEFC & Melapi T&G Plyfloor AS/NZS 2269 T&G Plyfloor uses A bond exterior glue making this tongue & groove product ideal for structural flooring applications. F11, F14* C/D 2 structural flooring for housing, commercial, stadiums, mezzanines and transportables 2400 x 1200, 2700 x 1200 12mm, 15mm*, 17mm, 18mm* n, 19mm* s, 21mm*, 25mm eg code: PSTRF150I240120 T&G Plyfloor (Local) AFS *T&G Plyfloor Silver Tounge Flooring (Imported) EO & PEFC 2 Treated MTO (Made To Order) n 2400 x 1200 only (Imported) s 2700 x 1200 only (Imported)
FormPly AS/NZS 6669 (Structural Form Ply) BracePly AS 2269 (Bracing Ply) FormPly uses A bond exterior glue making this product ideal for external structural applications. FormPly is used for concrete formwork to provide varying degrees of smooth finish. BracePly uses an exterior glue and is made up of softwood timber. BracePly is used mainly in structural framework. concrete formwork, horse floats and stables F11/F14/F17 eg code: PFORE170X24120 1800mm/2400mm x 1200mm 12mm, 17mm, 18mm, 19mm Sheet size*: Thickness wall bracing, roof bracing F8, F14 2440/2745 x 900/1200mm 7mm eg code: PSTRB070X244120 *Option for H2 & H3 treatment FilmPly (Non Structural Film Face) FSCPly* (Forest Stewardship Council Certified Ply) FilmPly uses an exterior glue making this product ideal for applications that require a smooth and hard surface. This is an imported product for the budget conscious and is best used in non structural applications. walls, floors, trailer floors, horse floats and stables FSCPly is the most environmentally friendly option in our range. FSCPly uses A bond exterior glue and A or B quality face. Suitable for staining and clear lacquer, or for pressing Amerind FSC Veneer, Natural Veneer, Vogue Veneer and Premio Architectural Panels (HPL). If full FSC certification is required on any of these products please contact Amerind. 18mm eg code: PFILE180I244122 Species: Hardwood FSC certified Plywood and Veneers provide a total environmental solution for cabinets, feature walls, ceilings, doors, acoustic panels A/B n B/BB l 2440 x 1220 n, 2500x1250 l BracePly AS 2269 (Imported Bracing Ply) BracePly uses an exterior glue and is made up of a specific hardwood. Braceply is used mainly in structural framework. This imported product has played a vital part in the construction industry for many years. wall bracing, roof bracing Hardwood: 4mm, 6mm, 9mm, 12mm, 15mm, 18mm, 25mm White Birch: 9mm, 12mm, 18mm, 21mm, 24mm, 30mm eg code: pmarm18fx244122 Species: n Hardwood (Marine), l White Birch *NB: Made To Order (MTO). Lead times may apply. F27 Sheet size*: 2440/2745/3050mm x 900/1200mm 4mm eg code: PBRAI040X244120 Species: Hardwood *Option for H2 & H3 treatment
Cabinet Making/Decorative DecoPly (Polyester/Paper Overlay Ply) Special Purpose LightaPly (Lightweight Ply) DecoPly uses an interior glue and a decorative layer, such as a veneer or printed design, pressed on a plywood substrate. DecoPly has a visually appealing finish enabling it to be used by architects and designers for a variety of applications. LightaPly uses an interior and A bond exterior glue and is made from a hardwood species specifically selected for its lightweight yet strong and durable properties. cabinets, feature walls, ceiling panels, furniture, caravans and demountables Lightweight wall, ceiling and acoustic panels, caravan, automobile and boat manufacturing Custom colours available BendiPly eg code: HWSEM036X244122 Species: Hardwood (Bending Ply) 2.7mm, 3.0mm, 3.6mm BendiPly uses an interior glue and is specially made to help create beautiful curves in a room. It provides designers and architects with more design options and is best suited for applications such as reception desks and feature walls/ ceilings. MarinaPly 6mm, 9mm, 12mm, 15mm, 18mm, 25mm eg code: PGHAE120X244122 Species: Chen Chen or Ceiba (depending on availability) E0 for A bond exterior glue only AS 2272 (Local Marine Ply) MarinaPly AS 2272 uses an A Bond exterior glue making it suitable for external structural uses where the plywood is expected to be in constant contact with water and moisture. Appearance Grade Ply Premium exposed edge Easily bent for interior walls and joinery curves such as curved reception tables, decorative feature walls/ceilings and columns 2440 x 1220mm (longband); 1220 x 2440 (crossband) 6mm, 9mm eg code: PBENG060X122244 Species: Chen Chen or Ceiba (depending on availability) The Appearance Grade Ply range of plywoods has a visually appealing, blemish free face and is ideal when you need a plywood where a stain or oil is applied. It can be made with an exterior A bond (black line) or interior (clear line) glue depending on the application or aesthetic required. Premium exposed edge for applications such as cabinets, feature walls, ceilings, doors, acoustic panels and for pressing Amerind Timber Veneers and Premio Architectural Panels A/A, A/C, B/B, or A/D 2400mm x 1200mm, 3mm, 3.6mm, 4mm, 6.5mm, 6mm, 9mm, 12mm, 12.5mm, 15mm, 18mm, 19mm, 25mm, 32mm eg code: PHOPE190A240120 Species: Hoop Pine AFS & PEFC, Radiata EO & PEFC, Lauan & Chen Chen or Ceiba (depending on availability) Premium exposed edge MarinaPly Premium exposed edge Premium exposed edge, exterior & interior high moisture applications such as marine applications, docks, motorhomes, shipyards and for pressing Amerind Timber Veneers and Premio Architectural Panels F14, F17 2400mm x 1200mm eg code: PHOPM090X240120 Species: Hoop Pine AFS & PEFC 7mm, 10mm, 13mm, 16mm, 19mm, 25mm BS 1088 (Imported Marine Ply) MarinaPly BS 1088 uses an A Bond exterior glue making it suitable for external uses where the plywood is expected to be in constant contact with water and moisture. This is an imported product compliant to an internationally recognised British Standard. Premium exposed edge, exterior & interior high moisture applications such as marine applications, docks, motorhomes, shipyards and for pressing Amerind Timber Veneers and Premio Architectural Panels eg code: PMARM120X244122 Species: Hardwood 4mm, 6mm, 9mm, 12mm, 15mm, 18mm, 25mm
www.amerind.com.au samples@amerind.com.au Call 1300 850 477 Fax 1300 850 577 APR 11 veneers P laminates P plywood P flooring P timber P trade