Flooring Accessories Issue 6 CARPET GRIPPER CARPET & VINYL FLOOR EDGINGS WOOD & LAMINATE FLOOR EDGINGS STAIR NOSINGS & PVC ACCESSORIES FLOORING UNDERLAYS FLOORING ADHESIVES HEAT SEAMING TAPES SINGLE & DOUBLE SIDED TAPES TOOLS, BLADES & FIXINGS RETAIL PACKAGED PRODUCTS love your floor
Welcome...... to the sixth issue of the Interfloor flooring accessories catalogue, containing approximately 500 Gripperrods and Stikatak products. All of our products are designed to ensure a quick, cost effective and high quality installation. On page 15 we have created a new section for selfadhesive metals and on pages 6-13 we have improved the descriptions of our metal edgings by giving the full profile and dimensions of each product. Our range is dedicated to meet the developing needs of the professional installer and so we have introduced new products and improved some existing ones. We have improved the Clip system and updated its colour options. We have also updated the colour options for our floor thresholds and Floor Edge Trim to reflect changing tastes. We want you to be able to find the information you need quickly and easily, so we have improved some of our catalogue sections. We continue to offer some unique and exclusive products such as the Stikatak Speed Catt, Trim Master and Floor Edge Trim again all designed in collaboration with professional installers. We also remain the only UK manufacturer of carpet gripper. We are constantly striving to improve our range and if you have any suggestions or comments please contact us. If you need a downloadable PDF version of the catalogue visit www.interfloor.com. Contents 2 CARPET GRIPPER The range now consists of Gripperrods Golden, Tackfast and Contract gripper and Stikatak s Regular gripper in specifications suitable for every carpet and sub-floor. In addition, Floorworks gripper and tapes are for the tension fitting of felt backed carpets and Blind Gripper is designed to give a neat edge to single and double stick installations. CARPET & VINYL 5 An edging for every textile and hard floor covering. Available in a variety of options for that perfect finish - Polished FLOOR EDGINGS Aluminium, Anodised Gold, Matt Gold, Matt Silver and Solid Brass. 11 WOOD & LAMINATE FLOOR EDGINGS An edging to suit all wood and laminate floors. Available in a variety of metal and wood effect finishes to complement floor covering décors. Our unique Clip system is suitable for joining 2 floor types of level or differing heights. Maximum height of higher flooring is 28mm and covers level flooring up to 18mm. Self adhesive Floor Edge Trims are now an important part of our range, offering greater flexibility for the flooring installer. 16 STAIR NOSINGS & PVC ACCESSORIES Stikatak s range of stair nosings and PVC accessories consist of both slimline and heavy duty aluminium profiles. Available with PVC inserts in a choice of 3 colours and a complementary range of PVC nosings, skirtings and cove formers. 18 FLOORING UNDERLAYS A range of light polyethylene and high density rubber underlay for use under laminate, solid timber and engineered wooden floors. 20 FLOORING ADHESIVES The range includes multipurpose adhesives and tackifiers for direct stick down, single and double stick installations for carpet and carpet tiles. Acrylic adhesives are available for the installation of vinyl flooring. We also offer a wide range of spray and cartridge adhesives for fixing gripper and edgings. 28 HEAT SEAMING TAPES A range of different specification heat seaming tapes to suit various requirements. All are designed to give a strength of finished seam in excess of British Standards. 30 SINGLE & DOUBLE SIDED TAPES Double sided contact tape for upstands including flexible vinyls. Underlay joining tapes for stretch and single/double stick applications. Double sided tapes for all carpets and vinyls. Vapour barrier tape and strip for joining underlays beneath wood and laminate floors. 32 TOOLS, BLADES & FIXINGS A broad selection of tools for floor preparation, adhesive and screed application, measuring and marking, cutting and trimming, fixing, seaming, stretching and vinyl installation. Blades and fixings for all applications. Tool kits and carpet carriers. RETAIL PACKAGED 38 A range of retail packaged flooring accessories, designed to help the retailer when presenting in store. PRODUCTS Contact UK Sales on: 01706 238 810
Featured Products STICK DOWN The Clip System NEW Ideal for fitting laminate, wood and ceramics, vinyl or, indeed, any type of floor covering up to 28mm. It s never been easier to fit the Clip System, now with one self adhesive base, no screws needed and with two profiles (38mm and 50mm) to choose from. It s never been simpler! Each pack includes small, medium and large clips to accommodate different flooring heights. The varying height of the clips allow a wide range of floors of different or same levels to be bridged. Rapidbond & Super Blue Stick Down Metals Rapidbond and Super Blue are ready to use solvent free, rapid set gripper adhesives in a gunnable cartridge. For the permanent bonding of carpet gripper, metal edgings and stair nosings to concrete, timber, metal, caramic and terazzo floors. All Stikatak stick down metals are provided with an integral self adhesive strip along the base of the profile, allowing the user to simply peel away the protective film and stick the profile into position on the sub-floor. This eliminates the need for traditional drilling and screwing methods. Floor Edge Trims STICK DOWN STICK DOWN The Floor Edge Trim has been designed to bridge an expansion gap up to 15mm between wood or laminate flooring and the skirting. It is self adhesive, easy to fit and sits flat to the floor giving a clean smart finish. Available in 6 colours. Contact Export Sales on: +44 (0) 1706 238 825 1
Carpet Gripper CARPET GRIPPER The Gripperrods brand is synonymous with carpet gripper. We are the only company manufacturing gripper in the UK and now offer the most complete choice of gripper available, giving a range of products to suit any stretch-fit installation. Our range consists of Golden, Tackfast and Regular Gripper which are used in both contract and domestic installations. We also offer a Contract specification which is a specialist product used for particularly heavy stretch installations. In addition to products for traditional stretch carpet fitting we also offer specialist items for the tension fitting of felt backed carpets. Custom Printed Gripper We can supply gripper printed to your own personal requirements. Available in Golden and Tackfast specifications in medium pin only. Please contact Interfloor Sales for more information. Golden Gripper Golden Gripper is manufactured in the UK from 5 ply Russian Birch plywood, a hardwood plywood of consistent density, and has a wider 25mm (1 ) strip than both Tackfast and Regular gripper. This gives greater stability on the floor in nail down applications. It also has 10% more floorholding nails and a greater number of precision pins than Tackfast and Regular, which gives better holding in all types and qualities of sub-floor and higher strength in heavy stretch installations. s. Tackfast Gripper Tackfast Gripper is also produced in the UK from 5 ply Russian Birch plywood and has a 22.5mm strip with a pronounced bevel edge for an easy and consistent roll edge finish. The nails are made to exacting hardness standards to penetrate and hold in any sub-floor and the precision pins are designed for the carpet holding strength required. It is available in all three pin heights and floor nail specifications. Regular Gripper Regular Gripper has a 20mm strip with a pronounced bevel edge and is made of 5 ply Poplar plywood, which gives a good quality alternative to Russian Birch plywood. The zinc plated nails and galvanised pins are precision made to hold in any sub-floor and give the carpet holding strength required. Available with wood, concrete and dual purpose nails and medium pin. Contract Gripper Contract Gripper is manufactured in the UK from 5 ply Russian Birch plywood and is a specialist product for particularly heavy stretch installations. It is 42mm wide and has 3 rows of carpet holding pins compared to the two rows in other gripper specifications. Floorworks Felt Back Carpet Gripper Custom Print Available Custom Print Available 100 x 1.52m (5 ) Lengths 152.3m (500 ) Per Carton Golden Gripper 2110 Golden Gripper 2120 Golden Gripper 2140 Tackfast Gripper 3110 Tackfast Gripper 3120 Tackfast Gripper 3140 Tackfast Gripper 3170 Manufactured in the UK from 5 ply Russian Birch plywood. Designed for use with underlay to give the best finished appearance and wear characteristics to a Felt Back carpet installation. Microplast tape top surface and dual purpose floor pre-nails for fast, neat, tension fit installation on underlay. The recommended installation method for fitting underlay with felt back carpets Wood Neat Edge (Blind Gripper) This gripper enables the installer to create the perfect finished appearance around the wall for single and double stick installations. Based on Tackfast Gripper, it is manufactured in the UK from 5 ply Russian Birch plywood with dual purpose pre-nails, but no pins. 2 Contact UK Sales on: 01706 238 810
Carpet Gripper Long Pin / ) For heavy reinforced backed carpets used in commercial situations. 100 x 1.52m (5 ) Lengths 152m (500 ) Per Carton Medium Pin / ) The more usual pin length, suitable for most types of carpets. 100 x 1.52m (5 ) Lengths 152m (500 ) Per Carton Short Pin / For cord carpeting and some low tuft carpets. 100 x 1.52m (5 ) Lengths 152m (500 ) Per Carton CARPET GRIPPER Golden Gripper Long Pin / ) Medium Pin / ) Short Pin / Stick Down Our top quality stick down Golden Gripper is ideal for use on modern wooden staircases where fixing by nails is unsuitable. It is ideal for applications where special fixing methods are required. 25mm wide strip. 2110 Medium Pin & No Nail Pre-Nailed for wood floors Pre-nailed for ease and speed of installation when fitted to boarded or suspended timber floors, with specially tempered nails (threaded for holding power), pre-driven into the gripper. 25mm wide strip, 10% more nails and a greater number of pins than Tackfast or Regular Gripper. 2220 Long Pin & Wood Nail 2120 Medium Pin & Wood Nail 2020 Short Pin & Wood Nail Grippercrete Designed for ease of installation on concrete floors. Pre-nailed with high quality masonry nails for a firm fixing. 25mm wide strip, 10% more nails and a greater number of pins than Tackfast or RegularGripper. 2240 Long Pin & Masonry Nail 2140 Medium Pin & Masonry Nail Tackfast Gripper Long Pin / ) Medium Pin / ) Short Pin / Stick Down Stick down Tackfast is ideal for use on modern wooden staircases where fixing by nails is unsuitable. It is ideal for applications where special fixing methods are required. 22.5mm wide strip. 3110 Medium Pin & No Nail Pre-Nailed for wood floors Pre-nailed for ease and speed of installation when fitted to boarded or suspended timber floors, with specially tempered nails (threaded for holding power), pre-driven into the gripper. 22.5mm wide strip. 3220 Long Pin & Wood Nail 3120 Medium Pin & Wood Nail 3020 Short Pin & Wood Nail Grippercrete Designed for ease of installation on concrete floors. Pre-nailed with high quality masonry nails for a firm fixing. 22.5mm wide strip. 3240 Long Pin & Masonry Nail 3140 Medium Pin & Masonry Nail 3040 Short Pin & Masonry Nail Dual Purpose Pre-nailed with dual purpose nails. Suitable for most wood and concrete based floors. 22.5mm wide strip. 3270 Long Pin & Dual Purpose Nail 3170 Medium Pin & Dual Purpose Nail Regular Gripper Medium Pin / ) Pre-Nailed for wood floors Pre-nailed for ease and speed of installation when fitted to boarded or suspended timber floors, with specially tempered nails (threaded for holding power), pre-driven into the gripper. 20mm wide strip. REG-WP Medium Pin & Wood Nail Grippercrete Designed for ease of installation on concrete floors. Pre-nailed with high quality masonry nails for a firm fixing. 20mm wide strip. REG-CP Medium Pin & Masonry Nail Dual Purpose Pre-nailed with dual purpose nails. Suitable for most wood and concrete based floors. 20mm wide strip. REG-DP Medium Pin & Dual Purpose Nail Contact Export Sales on: +44 (0) 1706 238 825 3
Carpet Gripper CARPET GRIPPER Contract Gripper Gripperrods Contract gripper is manufactured in the UK from 5 ply Russian Birch plywood and is a specialist product for particularly heavy stretch installations. It is 42mm wide and has 3 rows of carpet holding pins compared to the two rows in other gripper specifications. It is available in medium pin height only and without floor nails. This allows the fitter to install by nailing or adhering the gripper to the floor, depending on the installation. 6942 Medium Pin & No Nail TOP TIP Gripper Fixings 50 x 1.52m (5 ) Lengths 76m (250 ) Per Carton A wide range of extra nails and screws packs are available on page 35. Wood Neat Edge (Blind Gripper) r) This gripper enables the installer to create the perfect finished appearance around the wall for single and double stick installations. Based on Tackfast Gripper, it is manufactured in the UK from 5 ply Russian Birch plywood and, with dual purpose pre-nails, but no pins. 3370 No Pins & Dual Purpose Nail 100 x 1.52m (5 ) Lengths 152m (500 ) Per Carton Floorworks Felt Back Carpet Gripper Floorworks Carpet Gripper For Flat Areas Designed for use with underlay to give the best finished appearance to the installation and the best wear characteristics. Microplast tape top surface and dual purpose floor pre-nails for fast, good finish, tension fit installations on underlay. The recommended installation method for fitting underlay with felt back carpets. FW007 Microplast Tape & Dual Purpose Nail 100 x 1.52m (5 ) Lengths With the growth in felt backed carpets, retailers 152m (500 ) Per Carton should still aim to benefit from the additional profit margin of an underlay sale. Felt backed carpet installations benefit from the use of underlay in the same way that traditional carpets do. The Floorworks System allows the installer to achieve a tension fit resulting in better appearance retention and wear characteristics. Consumers also benefit from distinctly improved carpet appearance, retention and walking comfort when underlay is used beneath a felt backed carpet. Floorworks Easy Gripper is designed for the installation of felt backed carpets with underlay in all areas. Mushroom tape is available for fitting felt backs without underlay (see page 31). Floorworks Carpet Gripper For Stairs Specially designed for use on stairs. A combination of Microplast tape and standard profile gripper pins. The pins prevent the aggressive Microplast tape from gripping the felt back prematurely prior to the carpet being tucked into the stair gully. Once tucked in, the pins combine with the Microplast tape to give the high holding strength required on stairs. The recommended installation method for fitting underlay with felt back carpets. FW008 Microplast Tape, Pins & Dual Purpose Nail For further advice on suitable underlays please contact Interfloor Sales. 100 x 1.52m (5 ) Lengths 152m (500 ) Per Carton 4 Contact UK Sales on: 01706 238 810
Carpet & Vinyl Floor Edgings A comprehensive range of high quality edgings with a choice of finishes CARPET & VINYL FLOOR EDGINGS Finishes available Polished Aluminium. Gold Anodised gives a hard wearing anodised finish, simulating a brass effect. TOP TIP Protective film & fixings Matt Silver and Matt Gold gives a hard wearing anodised finish. Stikatak metals are provided with a branded, removable protective film for the showface of the edging or sleeved. Where necessary each product has fixings provided. Polished Solid Brass for top quality domestic and contract use. Wood effect finish is available in various colours on most wood and laminate profiles. Contact Export Sales on: +44 (0) 1706 238 825 5
Carpet & Vinyl Floor Edgings CARPET & VINYL FLOOR EDGINGS Vinyl Edge Vinyl Edge - Small For resilient floor coverings up to 4mm thick. Has a high lustre finish in both gold anodised and polished aluminium. Includes fixings. 4.3mm 27.7mm 6mm 2.70m x 15 Per Tube Aluminium: M02.9A M02.9G 0.90m x 45 Per Carton Aluminium: M02.3A M02.3G Vinyl Edge - Medium For resilient floor coverings up to 5mm thick. Has a high lustre finish in both gold anodised & polished aluminium. Includes fixings. 5.7mm 31mm 7.5mm 2.70m x 15 Per Tube Aluminium: M03.9A M03.9G 0.90m x 45 Per Carton Aluminium: M03.3A M03.3G Coverstrip Vinyl Coverstrip Conceals and protects joins between all grades and thicknesses of resilient floor coverings. High lustre finish in both gold anodised and polished aluminium. Includes fixings. 25mm 2.70m x 15 Per Tube Aluminium: M01.9A M01.9G 0.90m x 45 Per Carton Aluminium: M01.3A M01.3G Carpet Coverstrip The angled ribs extruded on the underside lock into the carpet pile and draw the two edges together when the strip is screwed to the floor. Suitable for use with all types of carpet. High lustre finish in both gold anodised and polished aluminium. Includes fixings. 37mm 2.70m x 15 Per Tube Aluminium: M10.9A M10.9G 0.90m x 45 Per Carton Aluminium: M10.3A M10.3G Contract Coverstrip Designed for use with low pile carpets, carpet tiles or resilient floor coverings. High lustre finish in both gold anodised and polished aluminium. Includes fixings. 37mm 2.70m x 15 Per Tube Aluminium: M11.9A M11.9G 0.90m x 45 Per Carton Aluminium: M11.3A M11.3G Extra Wide Coverstrip The widest Coverstrip in the range to cover difficult joins between any floor coverings. Includes fixings. 61mm 2.70m x 15 Per Tube Aluminium: M12.9A M12.9G 0.90m x 45 Per Carton Aluminium: M12.3A M12.3G Solid Brass Coverstrip High quality, solid brass profile suitable for heavy traffic areas on carpet or resilient floors. Includes fixings. 38mm Solid Brass: 1759 6 Contact UK Sales on: 01706 238 810
Carpet & Vinyl Floor Edgings Single Edges Carpet Edge - Narrow High lustre finishes in both gold anodised and polished aluminium. The lighter version of Carpet Edge - Standard. Carpet Edge - Standard High lustre finishes in both gold anodised and polished aluminium. 9mm 9mm 31mm 2.70m x 15 Per Tube Aluminium: M29.9A M29.9G 2.70m x 15 Per Tube Aluminium: M20.9A 0.90m x 45 Per Carton Aluminium: M29.3A M29.3G 0.90m x 45 Per Carton Aluminium: M20.3A CARPET & VINYL FLOOR EDGINGS 37mm M20.9G M20.3G Carpet Edge - Fluted As Carpet Edge Standard, but with fluting to give a rich tone against the carpet. 8.3mm 2.70m x 15 Per Tube Aluminium: M22.9A 38mm M22.9G Carpet Edge - Heavy Duty Heavy duty version of the carpet edge with wider base for use with thicker carpets. 10.5mm 40mm 2.70m x 15 Per Tube Aluminium: M28.9A M28.9G Carpet Edge - Heavy Duty Raised Base This heavy duty version of the Carpet Edge is designed to secure the heavier grade of contract carpet. The wider base & the high lustre gold anodised finish gives a quality look to the flooring installation. 10.5mm 40mm 2.70m x 15 Per Tube Aluminium: M21.9A M21.9G 0.90m x 45 Per Carton Aluminium: M21.3A M21.3G Carpet Edge - Solid Brass For the highest class finish, polished natural brass. 8.5mm Solid Brass: 1259 39.5mm Foam Edge For use with felt and foam backed carpets. 10mm 2.70m x 15 Per Tube Aluminium: M24.9A M24.9G 26.5mm Carpet Tile Edging Specifically designed to protect the exposed edges of loose laid carpet tiles where no wall line exists. 28mm 2.70m x 15 Per Tube Aluminium: M25.9A M25.9G Square Edge Can be used for a variety of installations, as a carpet capping or finishing to open plan areas, easily mitred to form an access panel. Finished with a fine ribbed design which will keep its appearance even when subjected to heavy traffic. 12mm 32mm 2.70m x 15 Per Tube Aluminium: M72.9A M72.9G 0.90m x 45 Per Carton Aluminium: M72.3A M72.3G Contact Export Sales on: +44 (0) 1706 238 825 7
Carpet & Vinyl Floor Edgings CARPET & VINYL FLOOR EDGINGS Dualgrip Dualgrip - Standard The industry standard with a full 20mm top and 50mm base, available in high lustre finishes in both gold anodised and polished aluminium. 6.8mm 20mm 50mm 2.70m x 15 Per Tube Aluminium: M30.9A M30.9G 0.90m x 45 Per Carton Aluminium: M30.3A M30.3G Dualgrip - Raised Base Raised base the best type of double edge for carpets fitted with underlay, which is cut to butt up to the lips of the profile giving the smoothest transition to the finished installation. 6.8mm 20mm 50mm 2.70m x 15 Per Tube Aluminium: M37.9A M37.9G Dualgrip - Heavy Duty Heavy duty version of M30 with 28mm top and 62mm base. 7.5mm 28mm 62mm 2.70m x 9 Per Tube Aluminium: M31.9A M31.9G 0.90m x 27 Per Carton Aluminium: M31.3A M31.3G Dualgrip - Heavy Duty Raised Base This heavy duty version of the raised base Dualgrip is designed to secure the heavier grade of contract carpet. Recommended for the best installations. The wider top and the high lustre gold anodised finish gives that quality look that can t be achieved using the standard product. 7.5mm 28mm 62mm 2.70m x 9 Per Tube Aluminium: M32.9A M32.9G 0.90m x 27 Per Carton" Aluminium: M32.3A M32.3G Dualgrip - Raised Base Solid Brass 7.5mm 20mm 2.70m x 6 Per Tube Solid Brass: 4469 A high quality solid brass profile for the highest class finish. 55mm Karpetedge Karpetedge Used in conjunction with carpet gripper, Karpetedge provides a perfect, rolled edge finish to the carpet on flush surfaces in low traffic areas. It is ideal for providing a finish to open landings or coved skirtings. 11mm 30mm 1.21m x 10 Per Tube Aluminium: 7011 8 Contact UK Sales on: 01706 238 810
Carpet & Vinyl Floor Edgings Zig Zag Zig Zag - 9mm The 9mm Zig Zag gives a neat transition between laminate/hard flooring and adjacent stretch carpet installation. 8.4mm 42mm 28mm 2.70m x 15 Per Tube Aluminium: M34.9A M34.9G Matt Silver: M34.9AM Matt Gold M34.9GM 0.90m x 45 Per Carton Aluminium: M34.3A M34.3G Matt Silver: M34.3AM Matt Gold M34.3GM CARPET & VINYL FLOOR EDGINGS Zig Zag - 14mm The 14mm Zig Zag gives a neat transition between laminate/hard flooring and adjacent stretch carpet installation. 14mm 54mm 40mm Aluminium: M33.9A M33.9G TOP TIP Fitting Zig Zag Zig Zag - 19mm Zig Zag 19mm without teeth. Gives a neat transition between two sections of hard flooring. 45mm Aluminium: M35.9A M35.9G Zig Zag should be lightly dressed down using a rubber mallet after fitting, to ensure a snug fit to the edges of both floor coverings. 19mm 30mm Finishing Edges Angle Section - Small For applications requiring a right angled finish. Plain one edge, ribbed on the other. Undrilled. 23.5mm 23mm 2.70m x 15 Per Tube Aluminium: M70.9A M70.9G Matwell Edging For any application where a right angled edging is required and offering a higher quality finish than the small angle section. Particularly suitable for mat wells, where the ridged surface provides a non-slip finish to the installation. Undrilled. 15.9mm 42mm 2.70m x 15 Per Tube Aluminium: M71.9A M71.9G Stair Nosing TOP TIP Stair Nosings Stair Nosing - With Seperate Insert Stair nosings with anti slip black ribbed vinyl insert; ideal for light commercial or domestic use. Inserts included separately in the tube, to be fitted after the metal nosing has been fixed to the stair. 14mm 42mm 19mm Aluminium: 19419 19439 See page 16 for our full range of slimline and heavy duty stair nosings. Contact Export Sales on: +44 (0) 1706 238 825 9
Carpet & Vinyl Floor Edgings CARPET & VINYL FLOOR EDGINGS Stair Rods Stair Rods Beautiful, stylish, simple and secure, stair rods allow you to combine the traditional elegance of individual stair rods with wall-to-wall carpeting or stair runner. Stair rods will add a really distinctive touch to any staircase. Hollow Stair Rods Constructed from 16mm quarter round aluminium extrusion with a lustrous gold anodised finish. 8 x 3.125m (12 3 ) 6062 Brackets Polished, die cast, solid brass brackets designed for use with Hollow Stair Rods. Hinged top plate to enable easy fitting and securing of rods. Pack of 10 Pairs 6548 10 Contact UK Sales on: 01706 238 810
Wood & Laminate Floor Edgings Angle Edge Angle Edge - 8mm Gives a smooth transition down to resilient floorings. Drilled, and supplied with screws. Angle Edge - 8mm Self adhesive Self adhesive version of the 8mm Angle Edge. 8mm 8mm 32mm 32mm 9.8mm 9.8mm 2.70m x 15 Per Tube Aluminium: M04.9A M04.9G Matt Silver: M04.9AMA Matt M04.9GMA Oak: M04.9WOA STICK DOWN WOOD & LAMINATE FLOOR EDGINGS Angle Edge - 14mm Self adhesive 14mm self adhesive version of the Angle Edge 14.3mm 43mm 16.3mm Matt Silver: M05.9AMA Matt M05.9GMA Oak: M05.9WOA STICK DOWN Angle Edge - 22mm Self adhesive 22mm self adhesive version of the Angle Edge 22mm 23.8mm Matt Silver: M06.9AMA Matt M06.9GMA STICK DOWN 53.5mm Euro Coverstrip Euro Coverstrip - 38.5mm Self Adhesive High quality self adhesive coverstrip for use with most flooring types of equal levels. 38.5mm Matt Silver: M13.9AMA Matt M13.9GMA Beech: M13.9WBA Oak: M13.9WOA STICK DOWN Roundedge - 8.5mm TOP TIP Self Adhesive Edgings Roundedge - 8.5mm Gives a smooth transition down to adjacent resilient flooring. Fits over edge of laminate. Allows for expansion. No screws or fixings required. 8.5mm 48.5mm Matt Silver: M83.9AM Matt M83.9GM For a full list of our self adhesive (stick down) range of edgings go to page 15. 48.5mm Contact Export Sales on: +44 (0) 1706 238 825 11
Wood & Laminate Floor Edgings WOOD & LAMINATE FLOOR EDGINGS Zig Zag Zig Zag - 9mm Gives a smooth transition between hard flooring and an adjacent stretch carpet installation. Top of section should be lightly dressed down using a rubber mallet after fitting, to ensure a snug fit to edges of both floor coverings. Zig Zag - 14mm 14mm version of 9mm Zig Zag Section. Gives a smooth transition between a hard flooring and an adjacent stretch carpet installation. Top of section should be lightly dressed down using a rubber mallet after fitting, to ensure a snug fit to edges of both floor coverings. 14mm 8.4mm 28mm 42mm 40mm 54mm 2.70m x 15 Per Tube Aluminium: M34.9A M34.9G Matt Silver: M34.9AM Matt M34.9GM Oak: M34.9WO Aluminium: M33.9A M33.9G 0.90m x 45 Per Carton Aluminium: M34.3A M34.3G Matt Silver: M34.3AM Matt M34.3GM Zig Zag - 19mm Zig Zag 19mm without teeth. Gives a smooth transition between two sections of hard flooring. Top of section should be lightly dressed down using a rubber mallet after fitting, to ensure a snug fit to edges of both floor coverings. 19mm 45mm Aluminium: M35.9A M35.9G 30mm TOP TIP Self Adhesive Edgings Nosings For a full list of our self adhesive (stick down) range of edgings go to page 15. Nosings - 9mm Self Adhesive Ideal for use on wood / laminate flooring where a self adhesive fixing is required. 9mm 25mm Matt Silver: M74.9AMA Matt M74.9GMA STICK DOWN Oak: M74.9WOA Nosings - 15mm Self Adhesive 15mm version of the 9mm nosing Ideal for use on wood / laminate flooring where a self adhesive fixing is required. 15mm 25mm Matt Silver: M75.9AMA Matt M75.9GMA Oak: M75.9WOA STICK DOWN Nosings - 20mm Self Adhesive 20mm version of the 9mm nosing Ideal for use on wood / laminate flooring where a self adhesive fixing is required. 20mm 25mm Matt Silver: M76.9AMA Matt M76.9GMA Oak: M76.9WOA STICK DOWN Nosings - 23mm Self Adhesive Heavy duty version of the 20mm nosing. With slight bull nose. 23mm 44.62mm Matt Silver: M78.9AMA Matt M78.9GMA STICK DOWN 12 Contact UK Sales on: 01706 238 810
Wood & Laminate Floor Edgings Doubledge Doubledge - 8.5mm Gives a pleasing finish covering the join between two areas of laminate. Fits over two adjacent laminate edges allowing for expansion. No screws or fixings required. Squaredge 8.5mm 31.5mm 45mm Matt Silver: M84.9AM Matt M84.9GM 0.90m x 30 Per Carton Matt Silver: M84.3GM WOOD & LAMINATE FLOOR EDGINGS Squaredge - 8.5mm To give a neat square edge against which to butt other floor coverings. Also effective for finishing around French windows or raised thresholds. Fits over edge of laminate. No screws or fixings required 8.5mm 32mm 16.5mm M85.9G Matt Silver: M85.9AM Matt M85.9GM Squaredge - 14.5mm 14.5mm version of the 8.5mm Squaredge. Gives a neat square edge against which to butt other floor coverings. Also effective for finishing around French windows or raised thresholds. Fits over edge of laminate. No screws or fixings required 14.5mm 32mm Matt Silver: M82.9AM Floor Edge Trims The Floor Edge 2m x 2 Lengths (5 Per Pack) STICK DOWN The Floor Edge Trim is a patented product which has been designed to bridge the expansion gap between wood / laminate flooring and the skirting (up to 15mm gap). It is self adhesive, easy to fit and sits flat to the floor giving a clean smart finish. Available in 6 colours. Simply place The Floor Edge Trim over the perimeter edge of a Wood or Laminate flooring installation. With the drop edge facing the skirting, remove the self adhesive protective strip and press the adhered edge onto the skirting. Hold in place for 1 to 2 minutes until the adhesive has grabbed to the skirting. Random Slate: WFT002R-5 Silver Blue Slate: WFT002S-5 White Slate: WFT002W-5 Travertine: WFT002T-5 Oak: WFT002O-5 Light Oak: WFT002LO-5 Contact Interfloor Sales for the latest Floor Edge Trim colour range. Contact Export Sales on: +44 (0) 1706 238 825 13
The Clip System WOOD & LAMINATE FLOOR EDGINGS Ideal for fitting laminate, wood and ceramics, vinyl or, indeed, any type of floor covering up to 28mm. It s never been easier to fit the Clip System, now with one self adhesive base, no screws needed and two profiles to choose from. It s never been simpler! Easy to fit Self adhesive base NEW TOP TIP Fitting Clips Each pack includes small, medium and large clips to accommodate different flooring heights, if you are unsure about the size of clip required then start from the smallest and work upwards until best fit is achieved. No drilling required STICK DOWN Standard Clip System STICK DOWN Deluxe Clip System 38mm wide PVC Foil Finish 50mm wide Real Wood Veneer Finish 38mm standard version for joining any two floor types of the same or differing heights. Available in a variety of metalic effect and wood effect finishes. 38mm 50mm Deluxe version for joining any two floor types of the same or differing heights. Available in a variety of real wood veneer finishes. 50mm Suitable where difference in height between floorcoverings is up to 14mm Suitable where height of the flooring is up to 24mm Suitable for flooring of the same level from 5mm up to 18mm 0.90m x 38mm - 10 Per Box 1.80m x 38mm - 5 Per Box M60 Available in wood effect and metalic effect finishes. For the current range of available colours, contact Interfloor Sales. Suitable where difference in height between floorcoverings is up to 23mm Suitable where height of the flooring is up to 28mm Suitable for flooring of the same level from 5mm up to 18mm 0.90m x 50mm - 10 Per Box 1.80m x 50mm - 5 Per Box M50 Available in real wood veneer finishes. For the current range of available colours, contact Interfloor Sales. 38mm Wide 50mm Wide The varying height of the clips allow a wide range of floors of different or same levels to be bridged. Each clip can be used for both same height and varying height floors. 14 Contact UK Sales on: 01706 238 810
Self Adhesive Metals STICK DOWN Angle Edge Angle Edge - 8mm Self adhesive Self adhesive version of the 8mm Angle Edge. Angle Edge - 14mm Self adhesive 14mm self adhesive version of the Angle Edge 14.3mm 8mm 32mm 9.8mm 16.3mm Matt Silver: M04.9AMA Matt M04.9GMA Oak: M04.9WOA Matt Silver: M05.9AMA Matt M05.9GMA STICK DOWN WOOD & LAMINATE FLOOR EDGINGS 43mm Oak: M05.9WOA All Stikatak stick down metals Angle Edge - 22mm Self adhesive 22mm self adhesive version of the Angle Edge 22mm 23.8mm Matt Silver: M06.9AMA Matt M06.9GMA are provided with an integral self adhesive strip along the base of the profile, allowing the user to simply peel away 53.5mm the protective film and stick the profile into position on the STICK DOWN Euro Coverstrip sub-floor. This eliminates the need for traditional drilling and screwing methods. Euro Coverstrip - 38.5mm Self Adhesive High quality self adhesive coverstrip for use with most flooring types of equal levels. 38.5mm Matt Silver: M13.9AMA Matt M13.9GMA Beech: M13.9WBA Euro Coverstrip Self Adhesive Strips Oak: M13.9WOA STICK DOWN Nosings Nosings - 9mm Self Adhesive Ideal for use on wood / laminate flooring where a self adhesive fixing is required. 9mm 25mm Matt Silver: M74.9AMA Matt M74.9GMA Oak: M74.9WOA Nosings - 15mm Self Adhesive 15mm version of the 9mm nosing Ideal for use on wood / laminate flooring where a self adhesive fixing is required. 15mm 25mm Matt Silver: M75.9AMA Matt M75.9GMA Oak: M75.9WOA Nosings - 20mm Self Adhesive 20mm version of the 9mm nosing Ideal for use on wood / laminate flooring where a self adhesive fixing is required. 20mm 25mm Matt Silver: M76.9AMA Matt M76.9GMA Oak: M76.9WOA Nosings - 23mm Self Adhesive Heavy duty version of the 20mm nosing. With slight bull nose. 23mm 44.62mm Matt Silver: M78.9AMA Matt M78.9GMA Contact Export Sales on: +44 (0) 1706 238 825 15
Stair Nosings & PVC Accessories STAIR NOSING & PVC ACCESSORIES Our range of Stair Nosings consists of both slimline and heavy duty aluminium profiles available with PVC inserts in a choice of 3 colours along with a range of PVC nosings, skirtings and cove formers. Slimline Stair Nosings Slimline Aluminium Single Square Nose Ideal for vinyl linoleum and needle punch carpets. 32mm 56mm 10 Per Carton BLACK PVC insert GREY PVC insert WHITE PVC insert 2.44m lengths: W01244BLK WO1244GRY WO1244WHT 2.75m lengths: W01275BLK W01275GRY W01275WHT 3.22m lengths: W01322BLK W01322GRY W01322WHT Slimline Aluminium Single Raked Back Ideal for vinyl linoleum and needle punch carpets. 32mm 57mm 10 Per Carton BLACK PVC insert GREY PVC insert WHITE PVC insert 2.44m lengths: W07244BLK WO7244GRY WO7244WHT 2.75m lengths: W07275BLK W07275GRY W07275WHT 3.22m lengths: W07322BLK W07322GRY W07322WHT Slimline Aluminium Bull Nose Ideal for vinyl linoleum and needle punch carpets. 30mm 53mm 10 Per Carton BLACK PVC insert GREY PVC insert WHITE PVC insert 2.44m lengths: W06244BLK WO6244GRY WO6244WHT 2.75m lengths: W06275BLK W06275GRY W06275WHT 3.22m lengths: W06322BLK W06322GRY W06322WHT Heavy Duty Stair Nosings Heavy Duty Aluminium Single Square Nose Ideal for medium to heavy duty carpets, carpet tiles and heavy duty hard flooring. 32mm 60mm 10 Per Carton BLACK PVC insert GREY PVC insert WHITE PVC insert 2.44m lengths: W04244BLK WO4244GRY WO4244WHT 2.75m lengths: W04275BLK W04275GRY W04275WHT 3.22m lengths: W04322BLK W04322GRY W04322WHT Heavy Duty Aluminium Single Raked Back Ideal for medium to heavy duty carpets, carpet tiles and heavy duty hard flooring. 32mm 63mm 10 Per Carton BLACK PVC insert GREY PVC insert WHITE PVC insert 2.44m lengths: W03244BLK WO3244GRY WO3244WHT 2.75m lengths: W03275BLK W03275GRY W03275WHT 3.22m lengths: W03322BLK W03322GRY W03322WHT Heavy Duty Aluminium Bull Nose Ideal for medium to heavy duty carpets, carpet tiles and heavy duty hard flooring. 32mm 60mm 10 Per Carton BLACK PVC insert GREY PVC insert WHITE PVC insert 2.44m lengths: W08244BLK WO8244GRY WO8244WHT 2.75m lengths: W08275BLK W08275GRY W08275WHT 3.22m lengths: W08322BLK W08322GRY W08322WHT 16 Contact UK Sales on: 01706 238 810
Stair Nosings & PVC Accessories Flexible PVC Nosings Flexible PVC Bull Nose Easy to use slip resistant stair edging for light traffic areas, easily cut and fixed with contact adhesive (pg 26). Flexible PVC Square Nose Easy to use slip resistant stair edging for light traffic areas, easily cut and fixed with contact adhesive (pg 26). 3mm 38mm 2.5mm 30mm 65mm 50mm BLACK 10 Per Carton 3.20m lengths: WFN1 BLACK 10 Per Carton 3.20m lengths: WFN2 STAIR NOSING & PVC ACCESSORIES PVC Capping Strip PVC Cove Formers PVC Sit on Skirting 40mm Capping Strip Double Lip To protect and finish the edge of the floor covering. 20mm 20mm Cove Former 20mm Used to support floor coverings formed from floor to wall. Sit on Skirting Fixed to the wall with impact tape or contact adhesive and on top of the floor covering. 2mm 30 Per Carton BLACK 40 Per Carton BLACK WHITE 2m lengths: WCF3 100mm 75mm 2m lengths: WCAP1BLK WCAP1WHT 40mm Capping Strip Single Lip To protect and finish the edge of the floor covering. 20mm Cove Former 32mm Used to support floor coverings formed from floor to wall. 20mm 17mm 2mm 20mm 30 Per Carton BLACK 40 Per Carton 2m lengths: BLACK WHITE WCAP4BLK WCAP4WHT 30 Per Carton 2m lengths: BLACK WCF2 100mm x 2m lengths: 40 Per Carton 75mm x 2m lengths: WSO100BLK WSO75BLK PVC Vinyl to Tile Aluminium Flexi Edge 45mm 6mm to 9mm Vinyl to Tile Single Part Used to finish and seal vinyl to ceramic tile. For further details contact Interfloor Sales. 20mm 20mm Cove Former 38mm Used to support floor coverings formed from floor to wall. Flexi Edge Ideal for use with ceramic tiles when forming unusual floor shapes. Stikatak bending machine is also available. For further details contact Interfloor Sales. 50 Per Carton WHITE 30 Per Carton BLACK 10 Per Carton 6mm x 2.5m lengths: ALUMINIUM WFEA06 2.44m lengths: WVT1 2m lengths: WCF1 8mm x 2.5m lengths: WFEA08 Contact Export Sales on: +44 (0) 1706 238 825 17
Wood & Laminate Underlays FLOORING UNDERLAYS Silentfloor Gold Timbermate Excel Duratex Timbermate Silentfloor Gold is the ultimate solution to noisy wood or laminate flooring. Silentfloor Gold offers the highest specification acoustic performance, highest density rubber underlay, with a built in Vapourstop barrier. Silentfloor Gold will protect against moisture, eliminating the need for polythene sheeting when used with Vapour Tape or Vapourstop sealing strip. Timbermate Excel is the UK s premier underlay for wood and laminate floors. With a built in Vapourstop barrier, Timbermate Excel will protect against moisture; eliminating the need for polythene sheeting, when used in conjunction with Vapour Tape or Vapourstop sealing strip. Drum sound emission of 56 Sone Drum Sound classification SL30 The traditional high density rubber underlay for use under laminate, solid timber and engineered wooden floors. Drum sound emission of 57 Sone Drum Sound classification SL30 Noise reduction of 24 db Drum sound emission of 53 Sone Drum Sound classification SL30 Noise reduction of 24 db Noise reduction of 23 db 11 m x 1.37m * 15.07 m 2 * 3.60 mm 11 m x 1.37m * 15.07 m 2 * 4.20 mm 11 m x 1.37m * 15.07 m 2 * 3.60 mm TOP TIP Vapour Tape For a vapour barrier self adhesive seaming tape for use with Timbermate Underlays. See page 31. All In One Silverlay Plastifoam White All In One underlay is composed of a light 3mm polyethylene with an integral damp proof membrane whose thermal and sound insulation qualities are ideal for wood and laminate floors. Atoxic, odourless and chemically inert, All In One does not leave stains and offers an efficient resistance to pressure, repeated shocks and chemicals. 3 mm Polyethylene Noise reduction of 20 db Excellent thermal and shock insulator Integral damp proof membrane Integral self-adhesive fixing tape Odourless & non staining 2 mm polyethylene foam underlay with built-in silver foil moisture barrier and self adhesive overlap. Silverlay wood & laminate underlay is composed of a polyethylene foam, which is laminated with an integral overlapping silver metalised polypropylene film damp proof membrane of 20 micron. 2 mm Polyethylene Noise reduction of 18 db Excellent thermal and shock insulator 10cm overlapping moisture barrier membrane Integral self-adhesive fixing tape Odourless & non staining A light polyethylene underlay suitable for use under wood or laminate floors. 1.8mm Polyethylene Noise reduction of 18 db Easy to fit Pack of 8 rolls Pack of 8 rolls 10m x 1m 10.00 m 2 3.00 mm Pack of 8 rolls 10m x 1m 10.00 m 2 2.00 mm 10m x 1m 10.00 m 2 1.80 mm *The nominal roll dimensions and area have been quoted. 18 Contact UK Sales on: 01706 238 810
Flooring Protection Paper Felt - Floor Lining Paper Rug Anti-Kreep DUAL ACTION RETAIL STAND AVAILABLE FLOORING UNDERLAYS Paper Felt prevents foam backed carpets and underlays from adhering to the sub-floor. It increases insulation and prevents dust from rising through floorboards. Available in a range of weights and roll sizes to suit all needs. Paper Felt - Heavy Duty 50m x 2m 100m 2 Paper Felt - Medium 100m x 2m 200m 2 Grey side down for rugs on hard flooring. Black side down for rugs on carpet. Suitable for use on carpets, ceramics & tiles, wood & laminates and vinyl. Rug Anti-Kreep - Roll 25cm x 92cm 23m 2 1 roll per pack (merchandising stand available on pg 44) Interlay Rug Anti-Kreep - Pre-Pack 110cm x 80cm 0.88m 2 Pack of 6 Rug Anti-Kreep - Pre-Pack 140cm x 80cm 1.12m 2 Pack of 6 Rug Anti-Kreep - Pre-Pack 170cm x 110cm 1.87m 2 Paper Felt - Medium 100m x 1m 100m 2 Paper Felt - Light 100m x 1m 100m 2 Interlay prevents foam backed carpets & underlays from adhering to the sub-floor, increases insulation and prevents dust from rising through floorboards. Available in a range of weights and roll sizes to suit all needs. 200m x 1.5m 300m Vinyl Carpet Protector RETAIL STAND AVAILABLE TOP TIP For a complete guide to the full range of our underlays please contact Interfloor Sales on 01706 238 810 or contact your local Sales Representative. Quality carpet protector, with studded underside, to protect carpets from soiling and wear in heavy traffic areas. 30m x 69cm 20.7m 2 1 roll per pack (merchandising stand available on pg 44) Contact Export Sales on: +44 (0) 1706 238 825 19
Flooring Adhesives FLOORING ADHESIVES Our adhesives manufacturing plant in Haslingden produces a range of high quality, environmentally friendly, low VOC adhesives and our R&D and Technical teams ensure that our products are suitable for use with the latest trends in floorcoverings and health and safety requirements. MSDS/COSHH and technical data sheets for all our adhesives are available upon request or via our website www.interfloor.com STK100 Low Emission Acrylic Flooring Adhesive STK200 Very Low Emission Pressure Sensitive Flooring Adhesive STK 100 is a solvent free, high performance water-based acrylic adhesive which has very good bond strength and Low Emissions (EC2) (including tiles) high density foam backings underlayments surface membranes should be treated with at least a 3mm coating of smoothing compound before applying adhesive. STK 200 is a high performance, Very Low Emissions (EC1) water-based acrylic adhesive which represents the highest level of environmentally friendly adhesives currently available. substrates sanded backings high density foam backings underlayments If a surface membrane is in place and in suitable condition STK 200 can be applied directly onto it when used as a pressure sensitive adhesive. Otherwise a minimum 3mm coating of smoothing compound should be applied prior to application of the adhesive. STK 200 also contains both an in-can and dry film preservative. Pack Size: Coverage: Storage: Open Time: 15kg Approx 45 sq mtrs per 15kg 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost 15 45 mins. Storage: 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost Pack Size: Coverage: Open Time: 15kg Approx 40-70 sq mtrs per 15kg Wet: 15 45 mins. Pressure sensitive when completely dry 20 Contact UK Sales on: 01706 238 810
Flooring Adhesives FLOORING ADHESIVES STK300 STK400 STK500 STK525 Fast Grab Multi-Purpose Flooring Adhesive Very Low Emission Carpet Adhesive Very Low VOC Release Tackifier STK 300 is a versatile, water-based, synthetic latex, multi-purpose adhesive which has exceptional bond strength, fast grab, is easy to trowel and is non staining. STK 400 is a solvent-free, versatile, waterbased, synthetic latex which is easy to trowel, has fast grab and is non staining. It has Very Low Emissions (EC1), which represents the highest level of environmentally friendly carpet adhesives currently available. STK 500/525 is a solvent free, high performance, water based acrylic dispersion, with very low emissions (EC1). open time is not required coverings in normal traffic areas whilst allowing easy removal when required Rubber, Felt, Jute, Gel & Latex backed carpets open time is not required carpet and carpet tiles in heavy traffic areas backed carpets underlayments underlayments underlayments surface membranes should be treated with at least a 3mm coating of smoothing surface membranes should be treated with compound before applying adhesive. at least a 3mm coating of smoothing compound before applying adhesive. Pack Size: Coverage: 15kg Approx 45 sq mtrs per 15kg Pack Size: Coverage: 15kg Approx 45 sq mtrs per 15kg Pack Size: 10kg (STK500) 25kg (STK525) Coverage: Approx 5-7 sq mtrs per 1kg Storage: Open Time: 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost 10 20 mins. Storage: Open Time: 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost 10 20 mins. Storage: 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost Contact Export Sales on: +44 (0) 1706 238 825 21
Flooring Adhesives FLOORING ADHESIVES STK600 STK700 STK800 High Performance Flexible Wood Flooring Adhesive Contact Adhesive Latex Seaming Adhesive STK 600 is a high performance, low emission, water and solvent-free, elastic one-component adhesive for wood flooring. It has good resistance to humidity, weathering and temperatures of -40 C to +90 C. STK 700 is a brushable solvent-based synthetic rubber resin solution. STK 700 is highly versatile and fast drying. STK 800 is a water-based solvent-free natural rubber latex. It is easy to apply by either brush or a suitable applicator when applying a bead of adhesive to act as a seam sealant (see double stick installations on page 24). STK 600 is particularly suitable for problematic wooden flooring and can be used over normal underfloor heating systems. self-smoothing underlayments If a surface membrane is in place and in suitable condition STK 600 can be applied directly onto it. Otherwise a minimum 3mm coating of smoothing compound should be applied prior to application of the adhesive. STK 700 is not suitable for use on expanded polystyrene. of a seam on carpets and underlays. paper card and fabrics. Pack Size: 4 x 5kg Coverage: Approx 4 sq mtrs per kg one way, 2-3 sq mtrs per kg two way Storage: 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost. TOP TIP Handy Glue Wipes Industrial strength quick and easy- Pack Size: Coverage: Storage: Open Time: 15kg 15 sq mtrs per 15kg 6 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost 30 mins. Pack Size: Coverage: Storage: 4 x 5ltr 12 sq mtrs per 5ltr (depending on porosity) 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost to-use hand cleaning wipes specially formulated to remove glue, paint, ink, grease, grout and oils. See page 26 22 Contact UK Sales on: 01706 238 810
Double Stick Installations FLOORING ADHESIVES STK900 STK950 Double Stick Carpet Adhesive Double Stick Tackifier STK 900 is a water based rubber / resin adhesive which has a long open time designed to give a permanent bond to a wide range of floor coverings. It has low odour and is easy to trowel. This product has been specifically formulated for use with double stick systems where a long open time is required and is particularly suitable for use in warm climates. underlayments surface membranes should be treated with at least a 3mm coating of smoothing compound before applying adhesive. STK950 is a permanently tacky water based acrylic dispersion adhesive which is solvent-free and has a low odour. STK 950 is now packaged in a rectangular bucket for ease of application when applying with a roller. Storage: 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost Pack Size: Coverage: Open Time: 15kg Approx 45 sq mtrs per 15kg Up to 30 mins. Pack Size: Coverage: Storage: 15kg 45-135 sq mtrs per 15kg 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost THE DOUBLE STICK ADHESIVE SOLUTION With a double stick system, the dimensional stability of the carpet is considerably improved thanks to the additional weight and horizontal stiffness which results from the combination of carpet and underlay. The end product can be compared with a huge tile, a room-size macrotile, which, unlike, conventional tiles, is comfortable to walk on; an advantage normally only offered by stretched installations. An installation which offers the walking comfort and increased protection against wear that stretch fitting offers, and the stability provided by direct sticking is therefore the ideal solution for the fitting of carpets in commercial areas. CARPET STK 900 / 300 / 400 ADHESIVE DOUBLE STICK UNDERLAY STK 950 TACKIFIER ADHESIVE SUB-FLOOR Contact Export Sales on: +44 (0) 1706 238 825 23
Double Stick Installations FLOORING ADHESIVES Double Stick Installation Method The sub-floor must be level, sound, dry and free from dust, grease and other contaminants. It must be free from excessive moisture with a relative humidity not exceeding 75% (in accordance with BS 5325). A moisture indicator test should be performed in all new buildings to check for excessive levels of humidity. Lay out the underlay onto the sub-floor (rubber side down) ensuring seams in the underlay are closely butted and run at 90 to any carpet seams. Check the underlay joins are level and of the same height. Sub-Floor Preparation All aspects of sub-floor preparation should be in accordance with the latest version of BS 5325 code of practice for the installation of textile floorcoverings. Although some of the salient points contained within the Standard are summarised below, the installer should be familiar with the Standard and fully understand the recommendations made therein. Existing floorcoverings such as sheet vinyl, linoleum or any textile floorcovering should be removed and the sub-floor made good prior to commencing with the installation. The sub-floor must be sound, level, dry and Cut the underlay approximately 50mm oversize around the perimeter of the room. Roll back the lengths of underlay to expose the sub-floor. free from dust, grease or other contaminants. It is recommended that a moisture indicator test be performed on all new cementitious sub-floors with the installation only proceeding once the relative humidity of the floor has fallen below 75%. A room temperature of at least 18 C and a Apply STK 950 tackifier adhesive to the sub-floor using a roller or tackifier trowel. Once the adhesive has touch dried to a tacky state, roll the underlay back onto the adhesive, ensuring all seams are closely butted. Repeat the procedure for the whole installation. Cut the underlay to approx 6mm from the skirting board or wall to leave a gap for a tuck finish. sub-floor temperature of at least 10 C should be maintained for the duration of the installation. If underfloor heating is present, this should be switched off for 48 hrs prior to and 48 hrs after installation. Uneven surfaces should be smoothed with a proprietary smoothing compound. Non-absorbent sub-floors such as ceramic tiles, terazzo and power-floated concrete slabs should be skimmed with a minimum 3 mm of a proprietary smoothing compound. Very absorbent or dusty sub-floors should be Unroll the carpet and manoeuvre into the correct position, cutting approximately to size. Fold the carpet back on itself and apply STK 900 adhesive using a 2mm x 6mm notched trowel (see page 33). Lay the carpet into this and smooth out any fullness or air bubbles with a Gripperrods Glider (see page 33). Always glide from the centre of the room to the perimeter. Repeat this process for the remaining carpet ensuring that STK900 is wet when carpet is laid into it. If any seaming of the carpet is required it is important to seal any cut edges with a proprietary seam sealant (STK 800, see page 22) prior to laying the two sections of carpet into wet adhesive. Note that heat seaming tape is not required in a double stick installation. The tuck finish around the perimeter may be achieved by cutting the carpet slightly oversize and tucking this into the 6mm gap between the underlay and the wall. When all cutting and seaming is complete, use the glider over the installation again to ensure a perfectly smooth surface and to maximise the bond strength between the carpet and the underlay. primed with STK 1100 flooring primer (see page 27). Wooden floors must be structurally sound, level, smooth, dry and clean. Wooden floors showing signs of warping, shrinkage, excessive unevenness or wear must be rectified before proceeding. Wax or varnish coatings may react adversely with adhesive and so any such treatment should be removed. Parquet floors must be structurally sound, with any missing or damaged blocks replaced and loose blocks repaired. Again, any wax or glazing treatments must be removed. Metal floors may have a coating of protective grease which should be completely removed. Galvanised steel floors should be primed with STK 1100 flooring primer (see page 27). 24 Contact UK Sales on: 01706 238 810
Adhesive Selector Chart Carpets STK100 STK200 STK300 STK400 STK500 (10kg) STK525 (25kg) STK600 Woven P P P P P Actionbac P P P P P Gel Foam P P P P P Needlepunch P Secondary backed P P P P P Unitary backed P P P P P Felt P P P P P Latex P P P P P Hessian P P P P P STK700 STK900 Double Stick STK950 Double Stick FLOORING ADHESIVES Underlays Duralay Durafit P P P R Duralay System Ten P P P R Tredaire Technics P P P R Duralay Counterflame P P P R Duralay HT Contract 475 P P P R Tredaire Contract 7 & 9 P P P R Tredaire FR7 P P P R Carpet Tiles Bitumen backed P R PVC P R Gel backed P R PVC Vinyl composition tile P P P P PVC P P V/P Cushioned P P P P Coving/Skirting V/P Cork PVC backed P P Wood Block Plank P P Rubber Up to 2.5mm P P P = Permanent R = Release V/P = Vertical & Permanent Contact Export Sales on: +44 (0) 1706 238 825 25
Spray & Cartridge Adhesives FLOORING ADHESIVES Superspray Adhesive General purpose aerosol adhesive DCM and CFC free for perimeter fixing of felt and foam backed carpets, underlays and tiles. Can also be used with foam, floor lining paper, textiles and fabrics to wood, stone, tiles and concrete (not to be used for expanded polystyrene and vinyls). Vinyl Spray Adhesive Vinyl Spray Adhesive for temporary or permanent bonding on most surfaces including vinyls (not to be used for expanded polystyrene). Superspray Contact Adhesive Spray Contact Adhesive with a high strength two-way bond and fast tack. Ideal for capping, coving, sit-on and set-in skirting. Variable nozzle can be adjusted to suit differing applications. Designed for fixing wood, carpet upstands, most metals, leather, cork, vinyl upstands, semi-flexible PVC nosings, rubber, textiles, PU foam, rigid unplasticised PVC (not suitable for expanded polystyrene, linoleum and soft plasticised PVC). 500ml x 12 per pack Coverage: Approx. 3-4 m 2 per 500ml 250ml x 12 per pack Coverage: Approx. 1-2 m 2 per 250ml 750ml x 12 per pack Coverage: 4.5-10.5 m 2 per 750ml single sided application Super Blue (Rapid Set Gripper Adhesive) Gripper Adhesive Rapidbond Super Blue is a ready to use solvent free, rapid set gripper adhesive which allows carpet to be stretched within one hour. This product revolutionises fixing carpet gripper, metal trims and stair nosings to concrete, wood, chipboard and ceramic floors. Gap filling synthetic rubber based mastic adhesive for fixing gripper and metal edgings to sub-floors and nosings to stair treads. Bonds most common building surfaces including wood, masonry, metal and some plastics. Can also be used for wall panels, skirtings, cladding and door frames (not suitable for expanded polystyrene). A solvent free, one component, exceptionally fast curing, polyurethane adhesive in a gunnable cartridge. Permanently bonds carpet gripper, metal edgings and stair nosings to concrete, timber, metal and terazzo floors. 310ml x 12 per pack Coverage: Approx. 44 linear m per 310ml @ 3mm bead 310ml x 12 per pack Coverage: Approx. 11 linear m per 310ml @ 6mm bead 310ml x 12 per pack Coverage: Approx. 44 linear m per 310ml @ 3mm bead Hand Cleaning Glue Wipes Safe, heavy-duty double-sided cleaning wipes that combine a textured wipe with a hand cleaning solution. Specially formulated to remove glue, paint, grease, grout, oils and inks. Smooth side may be used to absorb contamination. DUAL ACTION Removes glue easily from hands. Removes light areas of glue from carpet and flooring. 4 x 100 wipes Textured side allows for the removal of oils, greases, resins, adhesives, sealants and inks. 26 Contact UK Sales on: 01706 238 810
Primer & Moisture Suppression STK1000 Epoxy Damp Proof Membrane STK1100 Universal Primer Concrete Sand/Cement Diluted Diluted FLOORING ADHESIVES Stone Diluted Anhydrite (Calcium Sulphate) Diluted Terrazzo and Quarry Tiles Neat Old Adhesive Residue Not Recommended STK 1000 is an epoxy damp proof membrane which chemically cures to suppress residual construction moisture. STK 1000 suppresses rising dampness (where no DPM is installed) in concrete and sand/ cement screeds. This permits the early installation of moisture sensitive flooring in fast track building programmes. STK 1000 suppresses the passage of construction moisture and rising damp up to 90% in one coat and 95% in 2 coats and is coloured blue to aid coverage uniformity. STK 1100 is a ready to use, water-based polymer, priming and bonding agent. STK 1100 can be used undiluted for the treatment of internal floors prior to the application of smoothing compounds. When diluted 1:1 STK1100 will consolidate friable (crumbly) surfaces, reduce porosity and provide improved adhesion. STK 1100 should also be used to prime STK 1000 (surface DPM) prior to the application of smoothing compounds. Old Bituminous Residue Not Recommended Asphalt Neat STK 1000 DPM Neat Pack Size: 4 x 5kg Coverage: 50 sq mtrs depending on application Storage: 12 months, protect from frost It is packaged in a unique plastic bucket, with insert containing hardener, to make mixing and storage more convenient. Joint Sealant For Wood & Laminate Flooring Pack Size: Coverage: Storage: TOP TIP 6.4kg 3-4 sq mtrs per kg 1st coat, 5 sq mtrs per kg 2nd coat (depending on sub-floor) 12 months if stored between 5-25 C in a cool dry area, in original unopened containers. Protect from frost. Floor Preparation Wood & Laminate Flooring Gap Sealant Flexible, water resistant sealant and gap filler in medium or dark colours for sealing around wood and laminate flooring. It has a silk finish and is resistant to mould and household cleaners. Laminate Joint Moisture Guard Clear, Flexible, water resistant joint sealer for glueless laminate floors. For use in moisture prone areas such as kitchens, bathrooms and utility areas. For our range of floor stripping and preparation tools see page 32. Colour: Medium Colour: Dark 125ml x 12 per pack Coverage: Approx. 5 linear m per 125ml 125ml x 12 per pack Coverage: Approx. 10 linear m per 125ml Contact Export Sales on: +44 (0) 1706 238 825 27
Heat Seaming Tapes - Heatac HEAT SEAMING TAPES Gripperrods tapes are manufactured in our UK factory in a quality controlled environment, which ensures the very high standards that have made Gripperrods the market leader in this product sector. All tapes feature a woven scrim with a glass fibre weft and a polyester warp. The glass fibre gives maximum strength across the seam, The polyester allows some stretch along the length but none along the width as the glass fibre ensures stability. We offer a range of different specification tapes to suit your various requirements. All are designed to give a strength of finished seam in excess of British Standards. The finished seam strength will also depend on selecting the right tape for the job and using the best of tools. Gold Line Seamwell Our top of the range tape is recommended for use in high traffic areas. Instead of the regular crepe paper backing it features a metallised gold foil that offers additional installation benefits: the iron is applied and a faster seaming speed if required for pattern matching. and backings This tape offers an adhesive formulation and weight designed for high traffic installations and particularly for more difficult backings such as Action-Bac. The adhesive system is designed specifically to achieve good overall contact with these more rigid, uneven textured backings. 20m x 10 Per Carton 20m x 10 Per Carton 100m x 2 Per Carton Standard Gold Seamwell Flat A lower cost alternative to Gold Line tape. It offers the same installation benefits but is designed for light traffic areas only. This tape is designed for the same heavy wear areas and difficult backings as Seamwell but is for those installations where a flat adhesive profile is preferred. 20m x 10 Per Carton 20m x 10 Per Carton 100m x 2 Per Carton 28 Contact UK Sales on: 01706 238 810
Heat Seaming Tapes - Heatac 6736B 6-7 Foil Supreme Ribbed High Traffic High Traffic High Traffic Not Recommended 6734/5B 6-7 Crepe Paper Supreme Ribbed High Traffic High Traffic High Traffic Not Recommended 6727/8B 6-7 Crepe Paper Supreme Flat High Traffic High Traffic High Traffic Not Recommended 6712/3B 5-6 Crepe Paper Standard Ribbed Moderate Traffic Moderate Traffic Not Recommended Not Recommended 6730B 3-4 Foil Standard Ribbed Light Traffic Light Traffic Not Recommended Not Recommended HEAT SEAMING TAPES 6702B 3-4 Crepe Paper Super LT & Special Ribbed Light Traffic Light Traffic Not Recommended Moderate Traffic H11-25/100 7-8 Crepe Paper Contract Ribbed Light/Medium Traffic Light/Medium Traffic Light/Medium Traffic Not Recommended In some cases of secondary backings and heat set yarns, the heat transfer from seaming can cause delamination and/or pile reversal. If in doubt, a sample test should be carried out prior to installation. Multiline Standard Designed for traditional backed carpets installed in moderate traffic areas. This tape is designed for use in the fitting of felt backed carpets. The lower melt temperature of the adhesive prevents damage to the carpet backing. The ribbed adhesive profile is designed specifically for use with the Super Heat Seam Iron. (See Page 37). This enables the tape to be centred automatically and ensures that the exact amount of adhesive is delivered for seam sealing. This tape also provides a lower cost alternative to Multiline tape for seaming conventional woven or secondary jute backed carpets in light traffic areas 20m x 10 Per Carton 100m x 2 Per Carton 20m x 10 Per Carton Unstitched Seaming Tape TOP TIP Heat SeamIng Tools For our full range of heat seaming installation tools go to page 37. An unperforated seam tape that can install a wide variety of carpet backings in areas of light to medium traffic. 25m x 8 Per Carton 100m x 2 Per Carton Contact Export Sales on: +44 (0) 1706 238 825 29
Double Sided Tapes SINGLE & DOUBLE SIDED TAPES We are pleased to offer a comprehensive range of tape systems. Premier Double Sided Tapes Double sided pressure sensitive tapes for every floor covering requirement, including display packed products Single sided underlay tapes Specialist composite tapes for the tension fitting of felt backed carpets Vapour barrier tapes for wood and laminate underlay Double sided PMR contact tape for fixing covings and upstands Premier Gold A contract grade double sided tape with a very heavy coating of aggressive synthetic rubber resin adhesive and easily tearable woven cotton carrier, providing high initial tack and subsequent bond strength. Flexible and conformable to all floor surfaces. Excellent gap fill and adhesion to heavily textured carpet backings. Suitable for installing rubber, foam-backed carpets, traditional, polyurethane and woven polypropylene backings. Premier Silver A heavy domestic grade tape with a high coating of synthetic rubber resin adhesive on a woven cotton scrim and siliconised kraft paper liner which can be easily removed. Flexible and conformable to all floor surfaces. Good gap fill and adhesion to textured surfaces. Suitable for foam-backed and polyurethane backed carpets. 50mm x 50m / 5 Per Carton 6492P 50mm x 50m / 5 Per Carton 6493P Premier Bronze A medium duty carpet tape with a thin film carrier and outstanding tack and adhesion. Suitable for flat, even subfloors. No ridges or tramlines on thin floor coverings. Suitable for use with carpets and carpet tiles. 50mm x 50m / 5 Per Carton 6494P Premier Green PMR A high technology product formulated from a special adhesive system to withstand the rigours of plasticiser attack. Specified by many manufacturers of PVC backed textile and PVC resilient floor coverings. 50mm x 25m / 5 Per Carton 6495P DIY PMR Vinyl Floor Tape A high technology product formulated from a special adhesive system to withstand the rigours of plasticiser attack. Specified by many manufacturers of PVC backed textile and PVC resilient floor coverings. 50mm x 5m / 24 Per Carton GR6544 Double Sided Tapes Heavy Duty Cloth Tape A high quality cloth carrier with a heavy spread of white coloured hot melt adhesive. The release paper is an easy release silicone paper. Can be used on all types of floorcoverings excluding Vinyl Sheet and Tiles and any product that has plasticiser in its backing. 50mm x 50m / 20 Per Carton B3-50/50 Vinyl Floor Tape A quality double sided tape produced specially for vinyls and floorcoverings with plasticisers in their backings. The adhesive used on this product is acrylic based to aid the prevention of plasticiser migration caused by an adverse reaction between the adhesive and the floorcovering backing. 50mm x 50m / 12 Per Carton B4-50/50 Carpet Tape A highly aggressive double sided tape, hot melt coated with a paper carrier, for use with carpets other than vinyl backed. 48mm x 50m / 12 Per Carton B8-48/50CB 48mm x 25m / 12 Per Carton B8-48/25CB Printed Exhibition Tape A unique quality tape specially designed to peel up from a surface without leaving a residue of adhesive. Simple and easy to use with light but aggressive adhesion. Recommended by major exhibition centres such as NEC at Birmingham and Earls Court, Olympia and the Excel centre in London. 50mm x 50m / 36 Per Carton B7-50/50 38mm x 50m / 48 Per Carton B7-38/50 30 Contact UK Sales on: 01706 238 810
Single & Double Sided Tapes PMR Contact Tape The Gripperrods range of contact tapes are Plasticiser Migration Resistant (PMR) for the rapid and trouble free application of flexible vinyl and other dimensionally stable, smooth backed upstands to a variety of wall surfaces (plaster, concrete, ceramic tile, wood, metal). 25mm x 50m / 5 Per Carton 6470P Double Sided PMR Contact Tapes A construction grade impact adhesive coating giving a fast tack, high strength two way bond The PMR properties of our adhesive make this tape the only recommended application method for soft PVC covings and upstands. A very fine web carrier that leaves no ridges or tramlines when applying thinner materials A white easy release liner Can be applied precisely to the surfaces required without any overspray, unlike wet adhesives SINGLE & DOUBLE SIDED TAPES 50mm x 50m / 5 Per Carton 6471P Low odour and non-hazardous in normal use Available in three widths to suit all heights of upstand Felt Back Carpet Fixing Tape Mushroom Tape The professional way to fit felt back carpet. Specially designed to hook grip and secure your carpet. 50mm x 10m / 20 Per Carton BF10 Solvent free adhesive Fast and easy to fit Easy to re-position and lift carpet after fitting No additional adhesive required Re-useable FELT BACK CARPET MUSHROOM TAPE FLOOR 50mm x 25m / 10 Per Carton BF25 Single Sided Tapes Water Proof Cloth Tape A good quality single sided tape for joining underlay in stretch installations. 50mm x 50m / 24 Per Carton Silver: C2-50/50-7 Black: C2-50/50-2 Vapour Barrier Tapes Vapour Tape A self adhesive seaming tape for use with Timbermate Excel, Silentfloor Gold and Boardwalk Underlays. The tape creates a vapour barrier and strengthens underlay joins. 75mm x 25m / 24 Per Carton 6450 Vapourstop Sealing Strip Creates a new moisture resistant sub-floor when used with Timbermate Excel or Silentfloor Gold underlays for wood and laminate floors. 250mm x 50m Per Roll 6929 Contact Export Sales on: +44 (0) 1706 238 825 31
Tools, Blades & Fixings TOOLS, BLADES & FIXINGS The Interfloor tool range has been compiled by choosing the very best of the Gripperrods and Stikatak products, enabling us to offer a comprehensive portfolio of quality tools for use by the professional flooring installer. TOP TIP Tool Kit For a complete carpet fitting tool kit, including all the tools required for a professional carpet fitter see page 37. Floor stripping & Preparation Hand Scraper Long Handled Floor Scraper Grinding Stone and Handle Tack & Moulding Lifter Robust scraper with soft comfortable grip, suitable for all kinds of stripping on floors and walls. The blade is set at an angle for maximum efficiency. A very stable and heavy duty floor scraper, ideal for removing all types of adhered floor covering. Length: 1.53m (5 ). A 20cm x 10cm grinding stone with a D-shaped handle which allows the installer to work more quickly and efficiently to remove trowel marks or high spots from screeds. Manufactured from high carbon forged steel. Ideal for removing gripper, metals or timber mouldings. Notched at both ends for removal of tacks and nails. Spare blade 102mm (10 pieces) Spare blade (1 piece) 32 Contact UK Sales on: 01706 238 810
Adhesive & Screed Applications TOOLS, BLADES & FIXINGS Adhesive Trowel B1 Notching Adhesive Trowel B2 Notching Screed Trowel Traditional tempered steel trowel, notched four sides with hard wood handle. Notches 1.5mm deep x 5mm centres. 5mm Traditional tempered steel trowel, notched four sides with hard wood handle. Notches 2mm depth x 6mm centres. 6mm Traditional tempered steel trowel with hard wood handle. Box of 5 Spare blade B1 notching Box of 10 Box of 5 Spare blade B2 notching Box of 10 Box of 5 Wood Adhesive Trowel Adhesive Cartridge Gun TEC 3200 Hot Melt Glue Gun TEC 810-12 Hot Melt Glue Gun Specifically designed for the application of wood adhesive. 7mm notched trowel Box of 12 For use in the application of cartridge based adhesives. A heavy duty Hot Melt Glue Gun, TEC 3200, which uses 43mm x 50mm Glue Cartridges. This gun is used by professional floorcovering contractors where extensive gluing is required on site with materials such as gripper, metal edgings and nosings. The TEC 810-12 is exceptionally comfortable and easy to use with a full hand lever trigger, narrow profile handle and soft feel grip. A highly efficient melt chamber gives a warm up time of only 2 to 3 minutes. The temperature is accurately controlled by a preset thermostat. 43mm glue cartridge (5kg Pack) Glue gun stick (5kg Pack) Glider Applicator Bottle TOP TIP Flooring Adhesives Heavy metal glider ensuring perfect adhesion of underlay to subfloor & floor coverings to underlay backing in stick-down installations. This handy 8oz dispenser bottle enables the installer to apply adhesives quickly and accurately especially when seam sealing see pages 22 & 24. You will find our full range of flooring adhesives on page 20 to 27. Box of 10 Contact Export Sales on: +44 (0) 1706 238 825 33
Cutting & Trimming TOOLS, BLADES & FIXINGS Small Napping Shears Large Napping Shears Super Carpet Shears 10 Super Carpet Shears 12 Wide blade, blue cushion grip handle, for fast trimming. Now with enlarged finger ring. Offset blue cushion comfort grip handle with large bottom ring to minimise hand and wrist fatigue. Blue cushion grip handle and durable knife edges ensure easy cutting of textile floor coverings. Blue cushion grip handle and durable knife edges ensure easy cutting of textile floor coverings. Lightweight Carpet Shears 10 A 10 lightweight shear pressed from stainless steel with comfortable, large ring handles. Gripper Cutting Shears Ideal for fast, accurate cutting of wooden gripper to fit the contours of any room. The anvil blade provides a firm base on which to rest the gripper when cutting. Moulded, plastic coated handles for a firm comfortable grip. Scotia Cutters / Gripper Mitre Shears High quality gripper shears with mitre guide for accurate cutting to any angle. Metal Snips Built with powerful leverage to provide effortless metal cutting. Well designed, vinyl covered handles assure comfort and protection. Box of 6 Trim Master Designed by master fitters for professional use, the unique design of the Trim Master ensures a precise cut together with a professional finish when trimming carpet or vinyl. Trim Master is extremely light in weight and comfortable to hold resulting in greater accuracy and precision. Adjustment to both the angle and the depth of the blade is extremely easy and Trim Master also allows long lengths of the floor covering to be trimmed both accurately and easily. Standard Stikatak hooked or straight blades can be used easily and quickly fitted. Loop Pile Cutter A very versatile carpet cutter. Cuts from front or back of carpet with two blade positions. Adjustable stainless steel nose plate allows row tracking and cutting for any depth of pile. Spare blade Dolphin Knife The most popular knife. Comfortable, positive grip. Easy blade replacement with thumbscrew opening, integral blade holder and magnetic blade retainer to hold blade in place whilst closing and locking. Supplied with belt clip and holder. Lino Knife / Tucker For those who prefer the traditional tucker, this must be the best one around. Thick resilient blade. Comfortable rubberised handle. Single 34 Spare blade Contact UK Sales on: 01706 238 810
Measuring & Fixing 7.5m Heavy Duty Tape Measure Roll Up Straight Edge 2.1m Cutting Blades Heavy Duty Blades For use with TCT001 TOOLS, BLADES & FIXINGS A 7.5m heavy duty tape measure with rubber outer case and plastic inner case. It has both Imperial and Metric measurements and a locking device. Flexible steel rule manufactured from 0.5mm thick flat steel. Can be rolled up by using the clip fastener provided. Length: 2.1m (6 10 ) Width: 80mm (3' 3 /16 ) Pack Size: 2000 Pack Size: 500 Hooked Blades For use with TCT001 & N2100S Box of 24 Pack Size: 500 10 dispensers of 5 blades Super Hooked Blades For use with TCT001 & N2100S 10 dispensers of 10 blades Electric Staple Gun Roll Up Straight Edge T-Square 4.1m Loop Pile Cutter Blades For use with NR91655 Heavy duty staple gun for use in both domestic and contract situations. This tool is highly balanced & ergonomically designed for continuous fastening tasks. The rule is made from creased, 0.5mm tempered steel. The head (600mm x 40mm x 5mm) is attached firmly at 90 using the knurled screw clamp. 10 dispensers of 10 blades Concave Blades (10x1000) 8mm Divergent Point Staples. For use with TCT001 & N2100S Pack Size: 500 Nails & Screws Nails Tack Hammer 6-10mm Hand Tacker 6-14mm Concrete nails - 20mm Pack of 5 x 1kg tubs Designed specifically for stapling underlay to timber floors with ease and speed. Only four moving parts, with good balance and comfortable vinyl hand grip. Rear loaded magazine holds 150 staples. Powerful tacker for use with a range of staple sizes. Concrete nails - 25mm (1 ) Pack of 4 x 1kg tubs Ring shank nails - 20mm Pack of 4 x 1kg tubs Screws Zinc screws - 25mm (1 ) Pack of 4 x 1kg tubs (5000) 8mm Staples 8mm Staples 10mm Staples 12mm Staples Blue tacks - 20mm Pack of 20 x 1kg boxes Brass plated screws - 25mm (1 ) Pack of 4 x 1kg tubs Contact Export Sales on: +44 (0) 1706 238 825 35
Stretching, Creasing & Tucking TOOLS, BLADES & FIXINGS Swivel-Lock Power Stretcher A power stretcher is a big investment for any installer. Rather than have a basic stretcher at the lowest price, it must be worth spending more for the most versatile stretcher around. We are pleased to offer the Swivel-Lock Power Stretcher. Swivel-Lock Power Stretcher Built in swivel lock. The head has a 60 range of free swivel for stretching patterned carpet. By depressing the built-in lock pin, you can lock the swivel in five convenient positions. Lock in the straight position for square stretching or at 15 for most angle stretching. There s even a 30 setting for extreme angles found in L-shaped rooms. Adjustable locking power head. Just a touch with your finger and the power head locks in place to allow you to take partial stretches. Gives you complete control over the amount of stretch applied. 30 lock for extreme angles found in living rooms or dining rooms. Speed roller rail block. A unique 14 wide tail block that is equipped with wheels to run along the skirting. Also features tension control on the tail block to aid control 60 of free swing for pattern matching. 15 locks parallel to wall for normal angle stretches. Pin adjustment bar. Set-up the pin depth exactly to suit each installation. Comes complete with three extension tubes, auto lock tube and one transfer tube. These make up to 7m maximum length. SpeedCatt Super Knee Kicker This knee kicker features the widest head, the largest bumper pad and one of the longest extensions of any kicker on the market. This combination allows you to move one third more carpet with every kick. The rubber hand grip and large rubber bumper pad also make this the most comfortable kicker to use. However, the big secret is in the head. Unique, hardened stainless steel teeth replace the traditional pin plate. These allow vastly improved bite into the carpet with negligible clogging up with yarn fibre. It has simple extension and tooth depth adjustment Conventional Knee Kicker Our standard extendable knee kicker is of robust precision diecast construction, with an easy extension mechanism, three Nap Grip inserts and adjustable pin plate with hardened steel pins. Pin depth is easily but precisely adjusted by turning the dial. Moulded buffer pad. Lino Knife / Tucker For those who prefer the traditional tucker, this must be the best one around. Thick resilient blade. Comfortable rubberised handle. The SpeedCatt is a revolutionary tool for the professional floor layer. It has been specifically developed by master fitters who have created the tool with wheels to revolutionise the carpet fitting trade by speeding up the process of creasing and tucking carpets into place saving time and money. An ideal product for the flooring distributor, the SpeedCatt will complement Stikatak s Trim Master (see pg 34) Wide Stair Tool Forged chrome steel stair tool with a 90mm (3 1 /2 ) blade to drive the carpet into the stair crotch. 36 Contact UK Sales on: 01706 238 810
Heat Seaming TOOLS, BLADES & FIXINGS Super Heat Seam Iron Heat Seam Iron Grooved Grooming Roller Invisiseamer An exceptional seaming iron with many features that make it ideal for seaming all carpet types, including felt backs. 900W heating element for fast heat up. Tough, non-stick coating on a ribbed base. Patented Teflon Carpet Guard system prevents distortion of sensitive backings. Cut away at the front of the iron to ensure backing is pre-heated. Two light safety indicators; red light caution, power on, iron is hot. Green indicator lights up when selected temperature is reached. Easily adjusted, top mounted dial for setting temperature with table showing setting and temperature. Three position cable controller allowing trailing cable to be kept out of the way. Super cool handle and sturdy steel tray. Heat Seaming Tape (item 6702B) is designed specifically for use with this iron when seaming felt backs. Seams and seals in one operation. From the same source as our Super Heat Seam Iron, this is a robust, well designed iron. 900W heating element for fast heat up Thermostat with five settings Three position cable controller allowing trailing cable to be kept out of the way Light indicating when iron is up to temperature Sturdy steel tray Helps produce a better seam when using Heatac tapes. When used behind the iron, angled roller wheels tend to pull the nap of the carpet together, achieving better penetration between carpet backing and hot thermoplastic adhesive. TOP TIP Heat Seaming Tapes Ideal for any carpet seam in even the heaviest traffic conditions, Gripperrods Gold Line Heat Seaming Tape is the top of our heat seam tape range. Supreme quality adhesive with high density glass fibre yarn combine to give the strongest possible seam The definitive tool for cutting carpets prior to seaming. Invaluable for borderwork. Supplied with a 73cm (2 5 ) base. Longer bases available. 1.83m (6 ) base only 3.66m (12 ) base only Gold foil enables close control of the seaming process (temperature and speed) for more difficult carpets For details of this and our full range of Heat Seaming Tapes see pages 28 & 29. Gripperrods Tool Kit Carpet Carrier Kit includes: NJ42 Conventional Knee Kicker TST011 Wide Stair Tool NJ51 Tack Hammer NJ54 8mm Staples TCT001 Dolphin Knife A complete carpet fitting tool kit, including all the tools required for a professional carpet fitter. This comprehensive kit is supplied in a handy Gripperrods toolbag as featured above. TSP010 TCT018 NJ23A NJ50 Tack & Moulding Lifter Gripper Shears 7.5m Tape Measure Gripperrods Tool Bag Sturdy, tubular steel frame, large pneumatic tyres and smooth roller bearings absorb heavy loads in the warehouse or showroom. Maximum safe working load 400 kilos. Complete Tool Kit Contact Export Sales on: +44 (0) 1706 238 825 37
Retail Packaged Products RETAIL PACKAGED PRODUCTS Contents A range of retail packaged flooring accessories, designed to help the retailer when presenting in store. Carpet Gripper Floor Edge Trims The Clip System Metal Edgings Adhesives & Tapes Floor Cleaning Products Carpet & Rug Protection Wrapping & Packing Tidypipes Carpet Gripper Merchandising Stands Display Packed Gripper Medium pin carpet gripper, display packed for retail display. Supplied pre nailed with dual purpose nails for use on most wood and concrete floors. 12 x (8 x 1.52m Lengths) 146m (480 ) Per Carton Medium Pin & Dual Purpose Nail Floor Edge Trims Floor Edge Trims The new Floor Edge Trim is a patented product which has been designed to bridge the expansion gap between wood / laminate flooring and the skirting (up to 15mm gap). It is self adhesive, easy to fit and sits flat to the floor giving a clean smart finish. Available in 6 colours. STICK DOWN Simply place The Floor Edge Trim over the perimeter edge of a Wood or Laminate flooring installation. With the drop edge facing the skirting, remove the self adhesive protective strip and press the adhered edge onto the skirting. Hold in place for 1 to 2 minutes until the adhesive has grabbed to the skirting. Random Slate Silver Blue Slate White Slate Contact Interfloor Sales for the latest Floor Edge Trim colour range. Travertine Oak Light Oak 2m x 2 Lengths (5 Per Pack) Oak 38 Contact UK Sales on: 01706 238 810
The Clip System Ideal for fitting laminate, wood and ceramics, vinyl or, indeed, any type of floor covering up to 28mm. It s never been easier to fit the Clip System, now with one self adhesive base, no screws needed and two profiles to choose from. It s never been simpler! Easy to fit Self adhesive base NEW TOP TIP Fitting Clips Each pack includes small, medium and large clips to accommodate different flooring heights, if you are unsure about the size of clip required then start from the smallest and work upwards until best fit is achieved. RETAIL PACKAGED PRODUCTS No drilling required STICK DOWN Standard Clip System STICK DOWN Deluxe Clip System 38mm wide PVC Foil Finish 50mm wide Real Wood Veneer Finish 38mm standard version for joining any two floor types of the same or differing heights. Available in a variety of metalic effect and wood effect finishes. 38mm 50mm Deluxe version for joining any two floor types of the same or differing heights. Available in a variety of real wood veneer finishes. 50mm Suitable where difference in height between floorcoverings is up to 14mm Suitable where height of the flooring is up to 24mm Suitable for flooring of the same level from 5mm up to 18mm 0.90m x 38mm - 10 Per Box 1.80m x 38mm - 5 Per Box M60 Available in wood effect and metalic effect finishes. For the current range of available colours, contact Interfloor Sales. Suitable where difference in height between floorcoverings is up to 23mm Suitable where height of the flooring is up to 28mm Suitable for flooring of the same level from 5mm up to 18mm 0.90m x 50mm - 10 Per Box 1.80m x 50mm - 5 Per Box M50 Available in real wood veneer finishes. For the current range of available colours, contact Interfloor Sales. 38mm Wide 50mm Wide The varying height of the clips allow a wide range of floors of different or same levels to be bridged. Each clip can be used for both same height and varying height floors. Contact Export Sales on: +44 (0) 1706 238 825 39
Retail Packaged Metal Edgings RETAIL PACKAGED PRODUCTS Vinyl & Carpet Edgings Vinyl Edge Small For resilient floor coverings up to 4.5mm thick. Has a high lustre finish in both gold anodised and polished aluminium. Includes fixings. 4.55mm 27.7mm 1.80m x 5 Per Tube Aluminium: M07P6A-5 M07P6G-5 0.90m x 10 Per Carton Aluminium: M07P3A M07P3G Vinyl Coverstrip Conceals and protects joins between all grades and thicknesses of resilient floor coverings. High lustre finish in both gold anodised and polished aluminium. Includes fixings. 25mm 1.80m x 5 Per Tube Aluminium: M01P6A-5 M01P6G-5 0.90m x 10 Per Carton Aluminium: M01P3A M01P3G Carpet Coverstrip The angled ribs extruded on the underside lock into the carpet pile and draw the two edges together when the strip is screwed to the floor. Suitable for use with all types of carpet. High lustre finish in both gold anodised and polished aluminium. Includes fixings. 34mm 1.80m x 5 Per Tube Aluminium: M19P6A-5 M19P6G-5 0.90m x 10 Per Carton Aluminium: M19P3A M19P3G Contract Coverstrip Designed for use with low pile carpets, carpet tiles or resilient floor coverings. High lustre finish in both gold anodised and polished aluminium. Includes fixings. 37mm 0.90m x 10 Per Carton Aluminium: M11P3A M11P3G Extra Wide Coverstrip The widest Coverstrip in the range to cover difficult joins between any floor coverings. Includes fixings. 61mm 1.80m x 5 Per Tube Aluminium: M12P6A-5 M12P6G-5 0.90m x 10 Per Carton Aluminium: M12P3A M12P3G Carpet Edge High lustre finishes in both gold anodised and polished aluminium. The lighter version of Carpet Edge - Standard. 9mm 31mm 1.80m x 5 Per Tube Aluminium: M29P6A-5 M29P6G-5 0.90m x 10 Per Carton Aluminium: M29P3A M29P3G Dualgrip Designed to givea neat join across the doorway in stretch carpet to carpet installations. 6.5mm 17.5mm 44mm 1.80m x 5 Per Tube Aluminium: M39P6A-5 M39P6G-5 0.90m x 10 Per Carton Aluminium: M39P3A M39P3G Zig Zag Gives a neat transition between a hard flooring and adjacent stretch carpet installation. Top of section should be lightly dressed down using a rubber mallet after fitting, to ensure a snug fit to edges of both floor coverings. 8.4mm 42mm 28mm 1.80m x 5 Per Tube Aluminium: M34P6A-5 M34P6G-5 0.90m x 10 Per Carton Aluminium: M34P3A M34P3G 40 Contact UK Sales on: 01706 238 810
Retail Packaged Metal Edgings Wood & Laminate Edgings Angle Edge - 8mm Self Adhesive Gives a smooth transition down to resilient floorings. 8mm 32mm 9.8mm 0.90m x 10 Per Carton Matt Silver: M04P3AMA Matt M04P3GMA Oak: M04P3WOA STICK DOWN RETAIL PACKAGED PRODUCTS Euro Coverstrip - 38.5mm Self Adhesive High quality coverstrip for use with most flooring types of equal levels. 38.5mm 0.90m x 10 Per Carton Matt Silver: M13P3AMA Matt M13P3GMA STICK DOWN Beech: M13P3WBA Oak: M19P3WOA Zig Zag Gives a neat transition between laminate / hard flooring and adjacent stretch carpet installation. Top of section should be lightly dressed down using a rubber mallet after fitting, to ensure a snug fit to edges of both floor coverings. 8.4mm 42mm 28mm 0.90m x 10 Per Carton Aluminium: M34P3A Gold M34P3G Matt Silver M34P3AM Matt Gold M34P3GM Beech M34P3WB Oak M34P3WO Nosings - 9mm Self Adhesive Ideal for use on wood / laminate flooring where a self adhesive fixing is required. 9mm 25mm 0.90m x 10 Per Carton Matt Silver: M74P3AMA Matt M74P3GMA STICK DOWN Beech: M74P3WBA Oak: M74P3WOA Roundedge - 38.5mm Gives a smooth transition down to adjacent resilient flooring. Fits over edge of laminate. Allows for expansion. No screws or fixings required. 8.5mm 39.5mm 45mm 0.90m x 10 Per Carton Matt Silver: M83P3AM Matt M83P3GM Oak: M83P3WO Doubledge - 8.5mm Gives a pleasing finish covering the join between two areas of laminate. Fits over two adjacent laminate edges allowing for expansion. No screws or fixings required. 8.5mm 31.5mm 45mm 0.90m x 10 Per Carton Matt Silver: M84P3AM Matt M84P3GM Oak: M84P3WO TOP TIP Self Adhesive Edgings For a full list of our self adhesive (stick down) range of edgings go to page 15. Contact Export Sales on: +44 (0) 1706 238 825 41
Adhesives & Tapes RETAIL PACKAGED PRODUCTS Vinyl, Carpet & Cork Adhesive Wood Flooring Tongue & Groove Adhesive Vinyl Floor Tape DIY PMR Vinyl Floor Tape A solvent free, low V.O.C., acrylic based adhesive with excellent bond strength. Suitable for use with carpet backings and both plasticised and non-plasticised vinyls. 6 x 1kg Approx. 3m 2 coverage 4 x 2.5kg Approx. 7m 2 coverage A solvent free, specialist PVA dispersion water resistant to D3 for wood and laminate flooring, plastic laminates and general woodworking applications. 500ml x 12 per pack Approx. 10-15 linear m per 500ml A quality double sided tape produced specially for vinyls and floorcoverings with plasticisers in their backings. The adhesive used on this product is acrylic based to aid the prevention of plasticiser migration caused by an adverse reaction between the adhesive and the floorcovering backing. 48mm x 15m 12 per pack A high technology product formulated from a special adhesive system to withstand the rigours of plasticiser attack. Specified by many manufacturers of PVC backed textile and PVC resilient floor coverings. 50mm x 5m 24 per pack Floor Cleaning Products Carpet Stain Remover Laminate Clean & Shine Wood Floor Cleaner Wood Floor Polish Proven instant results on carpets and upholstery in the home, car and workplace. With the instant foaming action stains are drawn out in seconds and wiped away. No water or rinsing required - just rub with a damp cloth. Pleasant smell, anti-static, easy, safe and effortless to use. No build up of polish. Dries to a sparkling shine. Enhances wood grain look. Cleans your laminate floor safely. Polymer film protects laminate from wear. Floor Pro wood floor cleaner is a sprayable cleaner specifically formulated for use on solid wooden floors. Regular use will keep floors free from dust and dirt. Floor Pro wood polish is a ready to use polymer dispersion providing a high gloss protective finish for all types of wood flooring. The dry film provides slip resistant protection for both sealed and unsealed wood flooring (except for oiled wood floors). 400ml - 12 per pack 500ml - 6 per pack 500ml - 6 per pack 500ml - 6 per pack 42 Contact UK Sales on: 01706 238 810
Carpet & Rug Protection Vinyl Carpet Protector Quality carpet protector, with studded underside, to protect carpets from soiling and wear in heavy traffic areas. Vinyl Carpet Protector 30m x 69cm 1 roll per pack (merchandising stand available on pg 44) RETAIL STAND AVAILABLE Floor Lining Paper (Paper Felt) Paper Felt prevents foam backed carpets and underlays from adhering to the sub-floor, increase insulation and prevent dust from rising through floorboards. CARPET RETAIL PACKAGED GRIPPER PRODUCTS Rug Anti-Kreep DUAL ACTION Rug Anti-Kreep Pre-Pack 110cm x 80cm Pack of 6 Grey side down for rugs on hard flooring. Black side down for rugs on carpet. Paper Felt Display Pack 1m x 20m 9 per pack Rug Anti-Kreep Pre-Pack 140cm x 80cm Pack of 6 Rug Anti-Kreep Pre-Pack 170cm x 110cm Pack of 6 Suitable for use on carpets, ceramics & tiles, wood & laminates and vinyl. Rug Anti-Kreep Roll 25m x 92cm (23m 2 ) 1 Roll (merchandising stand available on pg 44) RETAIL STAND AVAILABLE Tidypipe Wrapping & Packing Tidypipe Real Wood Handywrap - 17 micron Layflat Polythene Tubing - 250 Gauge Dispensable protective wrapping Provides protection for rolls of carpet and vinyl. Real wood Tidypipe which covers the exposed gap around 15mm radiator pipes. Refill Pack (with free handle) 17 micron 150m x 100mm 10 rolls Per Pack Layflat Polytube 250 Gauge 302m x 508mm (20 ) 1 Roll Per Pack Layflat Polytube 250 Gauge 232m x 660mm (26 ) 1 Roll Per Pack Oak 2 per Pack 12 per Carton Light Oak 2 per Pack 12 per Carton Contact Export Sales on: +44 (0) 1706 238 825 43
Merchandising Stands RETAIL PACKAGED PRODUCTS Rug Anti-Kreep Stand Accessories & Floorcare Stand Ideal way to display flooring accessories in a retail environment. Floor Fitting Accessories & Floorcare Stand Height 2050mm Width 1030mm Depth 500mm Y8 Extension Unit for longer lengths of edgings Height: 1880mm Width: 520mm Depth: 460mm Double sided Rug Anti-Kreep prevents the movement of rugs on both carpet and hard floorings Helps to prevent accidents by holding rug in place Works on both carpet and hard floorings No staining, does not leave an adhesive residue Place black side down onto carpet, grey side down on to hard flooring e.g. vinyl or laminate Carpet Protector Stand Ideal way to display two rolls of carpet protector in a retail environment. Allows rolls to be cut to length easily. Rug Anti-Kreep Stand Carpet Protector Stand Height 1750mm Width 640mm Depth 640mm Height: 1320mm Width: 815mm Depth: 110mm 44 Contact UK Sales on: 01706 238 810
Index A Accessories & Floorcare Stand 44 Adhesive - Cartridge Gun 33 Adhesive & Screed Applications 33 Adhesive Applicator Bottle 33 Adhesive Selector Chart 25 Adhesive Trowel B1 Notching 33 Adhesive Trowel B2 Notching 33 Adhesive Wipes 26 All in One Underlay 18 Aluminium Flexi Edge 17 Aluminium Stair Nosings 16 Angle Edge 11,15,41 Angle Section - Small 9 Architectural Gripper 4 B Blades 35 Blind Gripper 2,3 Blue Tacks 35 Brackets 10 Brass Plated Screws 35 Bull Nose 16,17 C Capping Strip 17 Carpet & Rug Protection 43 Carpet & Vinyl Floor Edgings 5 Carpet & Vinyl Trimmer 34 Carpet Adhesive 20 Carpet Carrier 37 Carpet Coverstrip 6 Carpet Edge 7,40 Carpet Floor Edgings 5 Carpet Gripper 2,38 Carpet Protection 19 Carpet Protector Stand 44 Carpet Shears 34 Carpet Stain Remover 42 Carpet Tape 30 Carpet Tile Edging 7 Cartridge Adhesive 26 Cartridge Gun 33 Clip System 14,39 Concave Blades 35 Concrete Nail gripper 3 Concrete Nails 35 Contact Adhesive 22 Contact Tapes 31 Contract Gripper 2,3 Conventional Knee Kicker 36 Cord Carpeting Gripper 2 Cove Formers 17 Coverstrips 6,40 Creasing Tools 36 Custom Printed Gripper 2 Cutting & Trimming Tools 34 Cutting Blades 35 D Damp Proof Membrane 27 Deluxe Clip System 14,39 Display Packed Gripper 38 Divergent Point Staples 35 DIY Metal Edgings 40,41 DIY Packed Gripper 38 DIY PMR Tape 42 DIY PMR Vinyl Floor Tape 30 Dolphin Knife & Holder 34 Double Sided Tapes 30 Double Stick Carpet Adhesive 23 Double Stick Floor Preparation 24 Double Stick Installation 24 Double Stick Tackifier 23 Doubledge 13,41 Dual Purpose Gripper 2 Dualgrip 8,40 Duratex 18 E EC1 20,21 EC2 20,42 Electric Staple Gun 35 Epoxy Damp Proof Membrane 27 Euro Coverstrip 11,15 Exhibition Tape 30 Extendable Knee Kicker 36 F Fast Grab Flooring Adhesive 21 Felt Back Carpet Fixing Tape 31 Felt Back Carpet Gripper 2,3 Finishing Edges 9 Fitting Clips 14,39 Fitting Tools 32 Fixing 37 Flexi Edge 17 Flexible PVC Nosings 17 Flexible Wood Flooring Adhesive 22 Floor Care 42 Floor Cleaning 42 Floor Edge Trims 13,38 Floor Edgings 4 Floor Scraper 32 Floor Scraper Blades 32 Floorworks Gripper 3 Foam Edge 7 G Gap Sealant 27 GEV Emicode 20,21,22,42 Glider 33 Glue Gun 33 Glue Gun Cartridges 33 Glue Sticks 33 Glue Wipes 26 Gold Line Heat Seaming Tape 28 Golden Gripper 2 Grinding Stone & Handle 32 Gripper 2,3,4,38 Gripper Adhesive 26 Gripper Cutting Shears 34 Gripper For Double Stick 4 Gripper Mitre Shears 34 Grippercrete Gripper 2 Gripperrods Tool Kit 37 Grooming Roller 37 H Hand Scraper 32 Hand Scraper Blades 32 Hand Tacker 35 Handywrap 43 Heat Seam Iron 37 Heat Seam Iron Grooved 37 Heat Seaming 37 Heat Seaming Selector Chart 29 Heat Seaming Tapes 28 Heatac 28 Heavy Duty Blades 35 Heavy Duty Cloth Tape 30 Heavy Duty Stair Nosings 16 Hollow Stair Rods 10 Hooked Blades 35 Hot Melt Glue Gun 33 I Interlay 19 Invisiseamer 37 K Karpetedge 8 Knee Kicker 36 L Laminate Clean & Shine 42 Laminate Floor Cleaner 42 Laminate Joint Moisture Guard 27 Laminate Joint Gap Sealant 27 Latex Seaming Adhesive 22 Layflat Polythene Tubing 43 Lightweight Carpet Shears 34 Linoleum Knife 34,36 Long handled Floor Scraper 32 Long Pin Gripper 2 Loop Pile Cutter 34 Loop Pile Cutter Blades 35 Low Emission Acrylic Flooring Adhesive 20 Low Tuft Carpet Gripper 2 M Matwell Edging 9 Measuring & Fixing 37 Medium Pin 2 Merchandising Stands 44 Metal Edgings 40 Metal Snips 34 Microplast Gripper 4 Microplast Tape 3 Moisture Guard 27 Moisture Suppression 27 Multi-Purpose Flooring Adhesive 21 Multiline Heat Seaming Tape 29 Mushroom Tape 31 N Nails 35 Napping Shears 34 Neat Edge Gripper 4 New Products 1 Nosings 12,15,17,41 O Own Print Gripper 2 P Packing 43 Paper Felt - Floor Lining Paper 19,43 Plastifoam White 18 PMR Contact Adhesive Tape 31 PMR Tape 30,31 Polythene Tubing 43 Power Stretcher 36 Pre-Nailed Gripper 2 Pre-Nailed Gripper 3,4 Pre-Packed Gripper 38 Premier Bronze Tape 30 Premier Gold Tape 30 Premier Green PMR Tape 30 Premier Silver Tape 30 Pressure Sensitive Flooring Adhesive 20 Primer 27 Printed Exhibition Tape 30 Professional Carpet Fitting Kit 37 Protective Film 5 PVC Insert 16 PVC Nosings 17 R Raked Back 16,17 Rapid Set Gripper Adhesive 26 Rapidbond 26 Regular Gripper 2 Reinforced Backed Carpets Gripper 2 Retail Packaged Products 38 Retail Packed Metal Edging 40 Ring Shank Nails 35 Roll up Straight Edge & T-Square 35 Roundedge 11,41 Rug Anti-Kreep 19,43 Rug Anti-Kreep Stand 44 S Safety Equipment 37 Scotia Cutters 34 Screed Trowel 33 Screws 35 Seamwell Flat Tape 28 Seamwell Heat Seaming Tape 28 Self Adhesive Angle Edge 15 Self Adhesive Euro Coverstrip 15 Self Adhesive Metals 15 Self Adhesive Nosings 15 Short Pin 2 Short Pin Gripper 3 Silentfloor Gold 18 Silverlay 18 Single Edges 7 Single Sided Tape 31 Sit on Skirting 17 Slimline Stair Nosings 16 Smooth Edge Gripper 3,4 Solid Brass 6,7,8 Spare Blades 35 SpeedCatt 36 Spray Adhesive 26 Square Edge 7 Square Nose 16,17 Squaredge 13 Stain Remover 42 Stair Nosings 9,16 Stair Rods 10 Standard Clip System 14,39 Standard Gold Heat Seaming Tape 28 Standard Heat Seaming Tape 29 Staple Gun 35 Staples 35 Stick Down Gripper 2 Stick Down Metals 15 STK100 20 STK1000 27 STK1100 27 STK200 20 STK300 21 STK400 21 STK500 21 STK525 21 STK600 22 STK700 22 STK800 22 STK900 23 STK950 23 Straight Edge 35 Stretch Fit 2 Stretch Fitting Tools 36 Sub-Floor Preparation 24 Super Blue 26 Super Carpet Shears 34 Super Heat Seam Iron 37 Super Hooked Blades 35 Super Knee Kicker 36 Superspray Adhesive 26 Superspray Contact Adhesive 26 Swivel-Lock Corner Support 36 Swivel-Lock Power Stretcher 36 T T-Square 35 Tack & Moulding Lifter 32 Tack Hammer 35 Tackfast Gripper 2 Tackifier Adhesive 21,23 Tape Measure 35 TEC 3200 - Hot Melt Glue Gun 33 TEC 810-12 - Hot Melt Glue Gun 33 The Clip System 14,39 The Floor Edge 13 Tidypipe 43 Tile Edging 7 Timbermate Excel 18 Tongue & Groove Adhesive 42 Took Kit 37 Tools, Blades & Fixings 32 Trim Master 34 Trowel 33 Tucker 34,36 Tucking Tools 36 U Underlay 18 Universal Primer 27 Unstitched Seaming Tape 29 V Vapour Barrier Tapes 31 Vapour Tape 31 Vapourstop Sealing Strip 31 Very Low Emission Flooring Adhesive 20,21 Very Low VOC Release Tackifier 21 Vinyl Carpet protector 19,43 Vinyl Coverstrip 6 Vinyl Edge 6,40 Vinyl Floor Edgings 5 Vinyl Floor Tape 30 Vinyl Spray Adhesive 26 Vinyl To Tile 17 Vinyl, Carpet & Cork Adhesive 42 W Wide Stair Tool 36 Wood & Laminate Floor Edgings 11 Wood & Laminate Floor Underlay 18 Wood & Laminate Gap Sealant 27 Wood Adhesive Trowel 33 Wood Floor Cleaner 42 Wood Floor Gripper 2 Wood Floor Polish 42 Wood Flooring Adhesive 22,42 Wood Nail Gripper 3 Wood Neat Edge Gripper 2,3 Wrapping 43 Z Zig Zag 9,12,40 Zinc Screws 35 CARPET INDEX GRIPPER Contact Export Sales on: +44 (0) 1706 238 825 45
Flooring Accessories Issue 6 Head Office: Interfloor Limited, Broadway, Haslingden, Rossendale, Lancashire BB4 4LS United Kingdom UK Sales: Tel: 01706 238 810 Fax: 01706 214 737 CARPET GRIPPER CARPET & VINYL FLOOR EDGINGS WOOD & LAMINATE FLOOR EDGINGS STAIR NOSINGS & PVC ACCESSORIES FLOORING UNDERLAYS Export Sales: Tel: +44 (0)1706 238 825 Fax: +44 (0)1706 225 114 FLOORING ADHESIVES HEAT SEAMING TAPES Email: sales@interfloor.com SINGLE & DOUBLE SIDED TAPES TOOLS, BLADES & FIXINGS Web: www.interfloor.com RETAIL PACKAGED PRODUCTS love your floor