Your machine safety experts Emergency Stops Point-of-Operation Shields Helping make machines safer across North America ReiTech Corporation - Shakopee, MN Fax: 952-895-8010 or Email: Sales@ReiTech.Com Visit our website www.reitech.com for more information on our wide range of products and services.
Our EASY GUARD shields are simple, well designed and practical. Mounting is quick and secure, using OEM fasteners and common tools
The EASY GUARD line includes aftermarket guards for popular band saws. These guards help assure full regulatory compliance and operator safety.
Even older scroll saws benefit from improved guarding. The EASY GUARD scroll saw shield mounts with a single OEM fastener and quickly provides required guarding.
The Drill Press EASY GUARD mounts in about 4 minutes and affords a lifetime of protection without hindering the use of the machine. The shield snaps open with one hand to allow quick bit and workpiece changes.
A fully equipped drill press is a real classroom asset. Properly adjusted and used, an EASY GUARD controls drilling chips and broken bits.
An entire classroom equipped with ReiTech EASY ff power controls and EASY GUARD shields is a lesson in safety.
Individual machines benefit from EASY GUARD installation throughout the classroom. The versatile drill press EASY GUARD will fit every post mounted drill press from 8 to 21 size.
Color coding helps warn the user of dangerous machine parts. Guards are coded yellow, drive wheels, pulleys and the area around the point of operation are coded orange.
Even though this new band saw arrived only recently from the manufacturer, it was still necessary to install an EASY GUARD shield and an EASY ff power control to protect the operator and assure regulatory compliance.
The EASY GUARD shields readily fits a wide range of machine sizes.
The new EASY GUARD belt and disc sander shield can be easily adjusted to accommodate either right or left hand rotation. Properly installed, it helps protect the user from inadvertent contact with the unused parts of the abrasive surface.
EASY GUARD -Helping make machines safer across North America
Your machine safety experts Easy guard TM New DELTA Band Saw Lower Blade ReiTech is proud to introduce the first in our new line of EASY GUARD aftermarket guards for common wood and metal working tools. After listening to users and conducting extensive research, we have created practical, economical and unique guarding devices for your power tool. Shown with our new EASY GUARD Band saw Shield EASY GUARD is crafted in the USA with heavy gauge, laser cut, welded steel durable powder coated finish, color-coded for safety comfortable, ergonomic adjustment knobs integrated, guarded dust port with available 4 adapter EASY GUARD meets the most rigid operational requirements provides OSHA compliant protection of lower blade and wheel in any table position when properly installed helps prevent inadvertent lower blade and wheel contact related injuries helps assure proper dust collection Lower wheel door and table adjustment knob removed for clarity EASY GUARD installs easily and quickly on wide range of new model DELTA band saws no welding, drilling, or tapping is necessary installs using common hand tools and OEM fasteners requires no adjustment once installed does not interfere with production lower blade guard removes without tools to change blades WARNING! Do not operate saw with door Hand tools not included We have EASY GUARD guarding kits in stock, ready for shipment that will fit your new model DELTA metal and wood working band saw. Fits Delta 14 Band Saws with following Cat #s 28-243, 28-245, 28-255, 28-263, 28-270, 28-275, 28-278, 28-280, 28-283, 28-293, 28-299, 28-303 To order call 1-800-385-6161 Please have the Serial # and Cat # of your band saw ready when you call. ReiTech Corporation - Shakopee, MN Fax: 952-895-8010 or Email: Sales@ReiTech.Com Visit our website www.reitech.com for more information on our wide range of products and services. EASY GUARD is a trademark of the ReiTech Corporation. DELTA is trademark of the Delta Machinery Company. All ReiTech Corporation products pictured here are Patent Pending. EASY 2003 ff ReiTech and EASY Corporation GUARD are trademarks All rights of reserved the ReiTech Corporation.
Your machine safety experts Easy guard TM Shields ReiTech is proud to introduce our EASY GUARD line of chip shields and guards for band saws, scroll saws and drill presses. After listening to users and conducting extensive research, we created practical and economical point-of-operation guarding devices that are superior to any others available. EASY GUARD is crafted in the USA with heavy gauge, laser cut steel scratch resistant coated, industrial grade polycarbonate for longer shield life comfortable, ergonomic adjustment knobs EASY GUARD meets the most rigid operational requirements provides OSHA compliant protection from chips, broken blades and bits when properly used helps prevent inadvertent point-of-operation contact EASY GUARD installs easily and quickly on drill presses, band saws and scroll saws no welding, drilling or tapping is necessary easily adjustable and stable in use does not interfere with production We have EASY GUARD shields in stock, ready for shipment that will fit most common wood and metal-working band saws, scroll saws and drill presses. Call 1-800-385-6161 to order Please have the make and model of your machine tool ready when you call. ReiTech Corporation - Shakopee, MN Fax: 952-895-8010 or Email: Sales@ReiTech.Com Visit our website www.reitech.com for more information on our wide range of products and services. All ReiTech Corporation products pictured here are All Patent ReiTech Pending. Corporation 2003 ReiTech products Corporation pictured here All rights are Patent reserved Pending. 2003 ReiTech Corporation All rights reserved EASY GUARD is a trademark of the ReiTech Corporation.
Your machine safety experts Easy guard tm ReiTech is proud to announce the EASY GUARD line of chip shields and point-of-operation guards for drill presses. After listening to users and conducting extensive research, we created practical and economical point-of-operation guarding devices that are superior to any others available. EASY GUARD is built in the USA with heavy gauge, laser cut steel scratch resistant coated, industrial grade polycarbonate for longer shield life comfortable, ergonomic adjustment knobs EASY GUARD meets the most rigid operational requirements provides OSHA compliant protection from chips and broken bits when properly used helps prevent inadvertent point-of-operation contact The EASY GUARD opens easily for quick tooling and workpiece changes. The drill press EASY GUARD is just $99 plus S&H. We have EASY GUARD chip shields in stock, ready for shipment that will fit your post mounted drill presses. Call 1-800-385-6161 to order Please have the make and model of your drill press ready when you call. EASY GUARD Installs quickly on your drill press with common tools No welding, drilling or tapping is necessary Readily adjustable and stays put when in use Will not interfere with production like other devices ReiTech Corporation - Shakopee, MN Fax: 952-895-8010 or Email: Sales@ReiTech.Com Visit our website www.reitech.com for more information on our wide range of products and services. EASY GUARD is a trademark of the ReiTech Corporation. All ReiTech Corporation products pictured here are Patent Pending. 2003 ReiTech Corporation All rights reserved
Your machine safety experts EASY GUARD TM Band Saw Shields ReiTech is proud to introduce our new EASY GUARD line of chip shields and guards for band saws. After listening to users and conducting extensive research, we created practical and economical point-of-operation guarding devices that are superior to any others available. The band saw EASY GUARD is just $69 +S&H. EASY GUARD is crafted in the USA with heavy gauge, laser cut steel scratch resistant coated, industrial grade polycarbonate for longer shield life comfortable, ergonomic adjustment knobs EASY GUARD meets the most rigid operational requirements provides OSHA compliant protection from chips and broken blades when properly used helps prevent inadvertent point-of-operation contact Models are available to fit almost any size band saw. All models tilt to accommodate your project. EASY GUARD installs easily and quickly on band saws no welding, drilling or tapping is necessary easily adjustable and stable in use does not interfere with production We have EASY GUARD chip shields in stock, ready for shipment that will fit most common wood and metal-working band saws. Call 1-800-385-6161 to order Please have the make and model of your machine ready when you call. ReiTech Corporation - Shakopee, MN Fax: 952-895-8010 or Email: Sales@ReiTech.Com Visit our website www.reitech.com for more information on our wide range of products and services. EASY GUARD is a trademark of the EASY ReiTech ff and Corporation. EASY GUARD All are ReiTech trademarks Corporation of the ReiTech products Corporation. pictured here are Patent Pending. All ReiTech Corporation products 2003 pictured ReiTech here Corporation are Patent Pending. All rights reserved 2003 ReiTech Corporation All rights reserved
Your machine safety experts Easy guard tm Scroll Saw Shields ReiTech is proud to introduce our new EASY GUARD line of chip shields and guards for scroll saws. After listening to users and conducting extensive research, we created practical and economical point-of-operation guarding devices that are superior to any others available. EASY GUARD is crafted in the USA with heavy gauge, laser cut steel scratch resistant coated, industrial grade polycarbonate for longer shield life comfortable, ergonomic adjustment knobs EASY GUARD meets the most rigid operational requirements provides OSHA compliant protection from chips, and broken blades when properly used helps prevent inadvertent point-ofoperation contact Models are available to fit almost any model scroll saw. All models tilt to accommodate your project. The scroll saw EASY GUARD is just $69 plus S&H EASY GUARD Installs quickly on your scroll saw with common tools No welding, drilling or tapping is necessary Readily adjustable and stays put when in use Will not interfere with production like other devices We have EASY GUARD shields in stock, ready for shipment that will fit your scroll saw. Call 1-800-385-6161 to order Please have the make and model of your scroll saw ready when you call. ReiTech Corporation - Shakopee, MN Fax: 952-895-8010 or Email: Sales@ReiTech.Com Visit our website www.reitech.com for more information on our wide range of products and services. EASY GUARD is a trademark of the ReiTech Corporation. All ReiTech Corporation products pictured here are All ReiTech Corporation products pictured here Patent are Pending. Patent Pending. 2003 ReiTech Corporation All rights reserved 2003 ReiTech Corporation All rights reserved
Your machine safety experts ReiTech Corporation - Shakopee, MN Fax: 952-895-8010 or Email: Sales@ReiTech.Com Visit our website www.reitech.com for more information on our wide range of products and services.