NETWORK CONNECTIVITY SYSTEMS
Installation Cable KS-STP Category 7 Installation Cable Certificates 10GBaseT FTP Category 6 Installation Cable UTP Category 6 Installation Cable UTP Category 5E Installation Cable FTP Category 5E Installation Cable
S-STP Category 7 Installation Cable Signamax Category 7 shielded installation cable complies with the most stringent parameters with significant headroom for installation safety. Selected design goes hand-in-hand with the best quality which, with strictly controlled production, guarantees the highest performance. The shielded Category 7 installation cable is produced in S-STP configuration (PimF Pair in metal foil) and is tested up to 900 MHz. Its excellent performance ensures full compatibility with all new high-speed data protocols, such as 10GBaseT. Foamed PE insulated conductors in the cable have the pairs shielded by aluminum foil (each pair separately) and copper braid (all four pairs). Sheath material is supported by fire retardant halogen free compound. Signamax Category 7 shielded installation cable complies with the latest standards as specified in EN 50173-1 and ISO/IEC 11801:2002. BC7-4DS-HF Construction, Mechanical and Electrical Properties Minimum bending radius, installation 8 x D Minimum bend radius, installed 4 x D Tensile strength Maximum tensile load, installation Maximum tension load, installed Temperature limits Installation Operation Heat release LSOH 100 N No stretch 0 to +50 C -20 to +60 C Fire classification LSOH IEC 60332-1 500 MJ/km Insulation resistance > 5,000 MΩ/km Resistance unbalance, maximum 2% NVP 79% 20 ns/100 m Diameter of copper conductor AWG 23 Outer diameter 7.0 mm Weight 65 kg/km Transfer impedance, nominal IEC96-1 1 MHz 1.1 MΩ/m 10 MHz 1.0 MΩ/m Transmission characteristics acc. to CAT 7 (at 20 C) Frequency Attenuation, NEXT ACR (MHz) nom. (db/100 m) (db) (db) 1.00 1.9 118 116 10.00 5.8 105 99 16.00 7.1 100 93 20.00 8.0 99 91 31.25 10.0 98 88 62.50 14.7 94 79 100.00 18.5 90 71 300.00 29.0 83 54 600.00 48.7 77 28 750.00 54.0 75 21 900.00 57.0 74 17 S-STP Category 7 Installation Cable PART NO. BC7-4DS-HF DESCRIPTION Category 7 S-STP Installation Cable, 500 m reels, LSOH K1 NETWORK CONNECTIVITY SYSTEMS
Certificates 10GBaseT Signamax Permanent Link Certificate Signamax Channel Certificate TM K2
FTP Category 6 Installation Cable Signamax Category 6 shielded installation cable BC6-4S is a high-performace data cable that is designed to meet the demands of today's most advanced voice and data networks. Category 6 cables support 1000Base-T/TX protocols for data rates up to 1 Gb/s and exceed the requirements of ANSI/TIA/EIA-568-B.2-1, ISO 11801:2002 and EN 50173-1:2002 standards. The Signamax Category 6 cable conductor is AWG 23 bare copper wire with high density polyethylene insulation. The non-metallic cross separator inside the cable ensures the best crosstalk elimination between individual pairs. The jacket of the BC6-4S horizontal cable is produced with PVC compound and its color is grey, the halogen-free version is also available. BC6-4S Mechanical Properties > 20 mm without load > 40 mm with load Temperature range, during operation -20 up to +60 C during installation 0 up to +50 C Electrical Properties (at 20 C ± 5 C) DC loop resistance 176 Ω/km Resistance unbalance 2% Insulation resistance (500 V) > 5,000 MΩ *km Capacitance at 800 Hz nom. 48 nf/km Capacitance unbalance 1,500 pf/km (pair to ground) (1-100 MHz) (100 ± 22) Ω Nominal velocity of propagation approx. 67% Propagation delay 535 ns/100 m 20 ns/100 m Test voltage (DC, 1 min) Core/Core and Core/Screen 1,000 V Construction Conductor Insulation Twisting bare copper wire O 0.56 mm (AWG23) Polyethylene, O 1.0 mm 2 cores to the pair Transmission characteristics acc. to Category 6 (at 20 C) f Attenuation NEXT ACR Return loss (MHz) (db/100 m) (db) (db/100 m) (db) max. nom. min. nom. min. nom. min. 1 2 2 74 90 71.8 88 23 4 3.8 3.8 65 89 61.2 85.2 23 10 6 6 59 89 53 82.8 23 16 7.6 7.6 56 86 48.4 78.1 23 20 8.5 8.5 55 84 46.5 75.8 23 31.2 10.7 10.7 52 81 41.3 70.7 23 62.5 15.5 15.1 47 77 31.5 61.8 23 100 19.9 19.1 44 74 24.1 54.7 23 125 22.5 21.3 43 72 20.5 51 21 155.5 25.4 23.8 42 71 16.6 47.1 21 175 27.1 25.3 41 70 13.9 44.9 21 200 29.2 27 40 69 10.8 42.3 21 250 33 32.6 38 68 5 35.2 19 Technical Data Product code Outer diameter Fire load Weight Copper content Tensile force mm MJ/km kwh/m kg/km kg/km N BC6-4S 6.2 329 0.091 42 18 80 FTP Category 6 Installation Cable PART NO. BC6-4S BC6-4S-HF DESCRIPTION Category 6 FTP Installation Cable, 500 m reels, PVC Category 6 FTP Installation Cable, 500 m reels, LSOH K3 NETWORK CONNECTIVITY SYSTEMS
UTP Category 6 Installation Cable Signamax Category 6 unshielded installation cable is designed to provide the highest level of transmission performance to meet the needs of today's most advanced voice and data networks. Category 6 cables support 10Base-T through 1000Base-T/TX protocols for data rates up to 1 Gb/s and exceed the requirements of TIA/EIA-568-B.2-1, ISO 11801:2002 and EN 50173-1 standards. The Signamax Category 6 cable conductor is AWG 23 bare copper wire with high density polyethylene insulation. The non-metallic cross separator inside the cable ensures the best crosstalk elimination between individual pairs. BC6-4 Mechanical Properties Temperature range, during operation during installation > 20 mm without load > 40 mm with load -20 up to +60 C 0 up to +50 C Electrical Properties (at 20 C ± 5 C) DC loop resistance 176 Ω/km Resistance unbalance 2% Insulation resistance (500 V) > 5,000 MΩ *km Capacitance at 800 Hz nom. 48 nf/km Capacitance unbalance 1,500 pf/km (pair to ground) (1-100 MHz) (100 ± 22) Ω Nominal velocity of propagation approx. 67% Propagation delay 535 ns/100 m 20 ns/100 m Test voltage (DC, 1 min) Core/Core and Core/Screen 1,000 V Construction Conductor Insulation Twisting Sheath bare copper wire O 0.56 mm (AWG23) Polyethylene, O 1.0 mm 2 cores to the pair non metallic cross separator (spline) PVC Transmission characteristics acc. to CAT 6 (at 20 C) f Attenuation NEXT ACR Return loss (MHz) (db/100 m) (db) (db/100 m) (db) max. nom. min. nom. min. nom. min. 1 2 2 74 90 71.8 88 23 4 3.8 3.8 65 89 61.2 85.2 23 10 6 6 59 89 53 82.8 23 16 7.6 7.6 56 86 48.4 78.1 23 20 8.5 8.5 55 84 46.5 75.8 23 31.2 10.7 10.7 52 81 41.3 70.7 23 62.5 15.5 15.1 47 77 31.5 61.8 23 100 19.9 19.1 44 74 24.1 54.7 23 125 22.5 21.3 43 72 20.5 51 21 155.5 25.4 23.8 42 71 16.6 47.1 21 175 27.1 25.3 41 70 13.9 44.9 21 200 29.2 27 40 69 10.8 42.3 21 250 33 32.6 38 68 5 35.2 19 Technical Data Product code Outer diameter Fire load Weight Copper content Tensile force mm MJ/km kwh/m kg/km kg/km N BC6-4 6.2 329 0.091 39 18 80 UTP Category 6 Installation Cable PART NO. DESCRIPTION BC6-4 Category 6 UTP Installation Cable, 500 m reels, PVC Halogen free cable available on request. TM K4
UTP Category 5E Installation Cable The Category 5E unshielded installation cable is mostly used cable for data transmission where no electromagnetic disturbance is a problem. Supplied as part of complete Signamax Category 5E solution, the cable represents one of the key elements for safety and economical data transfer. Sophisticated cable design ensures very low electromagnetic emitency and low crosstalk. All parameters exceed requirements specified by TIA/EIA 568-B.2-1, ISO/IEC 11801:2002, and EN 50173-1 standards. The Signamax Category 5E cables are suitable for the high-speed 1000BaseT Ethernet protocol. Sheath material is supported by fire retardant PVC and halogen free compound. BC5E-4 Construction Conductor bare copper wire O 0.51 mm (AWG 24) Insulation Polyethylene, O 0.95 mm Twisting 2 cores to the pair Sheath PVC alt. FRNC Electrical Properties (at 20 C ± 5 C) DC loop resistance 192 Ω/km Resistance unbalance 2% Insulation resistance (500 V) > 2,000 MΩ *km Capacitance at 800 Hz nom. 48 nf/km Capacitance unbalance 1,500 pf/km (pair to ground) Nominal velocity of propagation approx. 67% Propagation delay 535 ns/100 m 20 ns/100 m Test voltage (DC, 1 min) Core/Core and Core/Screen 1,000 V Mechanical Properties > 20 mm without load > 40 mm with load Temperature range, during operation -20 up to +60 C during installation 0 up to +50 C Transmission characteristics acc. to Category 5e (at 20 C) f Attenuation NEXT ACR Return loss (MHz) (db/100 m) (db) (db/100 m) (db) max. nom. min. nom. min. nom. min. 1 2 1.9 65 71 63.3 69.1 23 4 3.9 3.7 56 62 52.4 58.3 23 10 6.3 6.0 50 56 44.0 50.0 23 16 8.0 7.6 47 53 39.3 45.3 23 20 9.0 8.5 46 51 36.8 43.0 23 31.2 11.4 10.7 43 49 31.5 37.9 23 62.5 16.5 15.7 38 44 21.9 28.4 23 100 21.3 19.8 35 41 14.0 21.2 23 Technical Data Product code Outer diameter Fire load Weight Copper content Tensile force mm MJ/km kwh/m kg/km kg/km N BC5E-4 5.9 336 0.093 35 17.5 80 UTP Category 5E Installation Cable PART NO. DESCRIPTION BC5E-4 Category 5E UTP Installation Cable, 305 m boxes, PVC Halogen free cable available on request. K5 NETWORK CONNECTIVITY SYSTEMS
FTP Category 5E Installation Cable The Category 5E shielded installation cable is mostly used cable for data transmission where electromagnetic disturbance is a problem. Supplied as part of complete Signamax Category 5E solution, the cable represents one of the key elements for safety and economical data transfer. Sophisticated cable design ensures very low electromagnetic emitency and low crosstalk. All parameters exceed requirements specified by TIA/EIA 568-B.2-1, ISO/IEC 11801:2002, and EN 50173-1 standards. The Signamax Category 5E cables are suitable for the high-speed 1000BaseT Ethernet protocol. BC5E-4S Construction Conductor bare copper wire O 0.51 mm (AWG 24) Insulation Polyethylene, O 0.95 mm Twisting 2 cores to the pair Sheath PVC alt. FRNC Electrical Properties (at 20 C ± 5 C) DC loop resistance 192 Ω /km Resistance unbalance 2% Insulation resistance (500 V) > 2,000 MΩ *km Capacitance at 800 Hz nom. 48 nf/km Capacitance unbalance 1,500 pf/km (pair to ground) Nominal velocity of propagation approx. 67% Propagation delay 535 ns/100 m 20 ns/100 m Test voltage (DC, 1 min) Core/Core and Core/Screen 1,000 V Mechanical Properties > 20 mm without load > 40 mm with load Temperature range, during operation -20 up to +60 C during installation 0 up to +50 C Transmission characteristics acc. to CAT 5E (at 20 C) f Attenuation NEXT ACR Return loss (MHz) (db/100 m) (db) (db/100 m) (db) max. nom. min. nom. min. nom. min. 1 2 1.9 65 71 63.3 69.1 23 4 3.9 3.7 56 62 52.4 58.3 23 10 6.3 6.0 50 56 44.0 50.0 23 16 8.0 7.6 47 53 39.3 45.3 23 20 9.0 8.5 46 51 36.8 43.0 23 31.2 11.4 10.7 43 49 31.5 37.9 23 62.5 16.5 15.7 38 44 21.9 28.4 23 100 21.3 19.8 35 41 14.0 21.2 23 Technical Data Product code Outer diameter Fire load Weight Copper content Tensile force mm MJ/km kwh/m kg/km kg/km N BC5E-4S 5.9 336 0.093 35 17.5 80 FTP Category 5E Installation Cable PART NO. DESCRIPTION BC5E-4S Category 5E FTP Installation Cable, 305 m boxes, PVC Halogen free cable available on request. TM K6