, General-purpose Type General-purpose in packages for a wide range of applications Contact form: a (SPST-NO) or b (SPST-NC) Load voltage: 6 V RoHS Compliant Application Examples Note: The actual product is marked differently from the image shown here. SOP Semiconductor test equipment Test & Measurement equipment Communication equipment Security equipment Industrial equipment Power circuit Amusement equipment GVM-6@G@/6VY@ Package (Unit : mm, Average) Model Number Legend.9 4.4. Special. Ordering Information.7 4.55 Note: The actual product is marked differently from the image shown here. GVM-@ @ @ @ @ 4 5. Load voltage 6: 6 V. Contact form : a (SPST-NO) : b (SPST-NC) 4. Additional functions None: Dielectric strength between I/O 5 V Y: Dielectric strength between I/O 75 V. Package G: V: Special 5. Other informations When specifications overlap, serial code is added in the recorded order. Package Contact form Terminals Stick packaging Tape packaging Continuous Load voltage load current (peak value) * (peak value) * Model package Model package quantity quantity (TR) SOP4 4 ma pcs. (TR) 5 pcs. (TR) a (SPST-NO) Surface-mounting 6 V ma (TR) pcs. Special Terminals 5 pcs. (TR5) 5 pcs. 5 ma (TR) pcs. SOP4 b (SPST-NC) pcs. (TR5) 5 pcs. * The AC peak and DC value are given for the load voltage and continuous load current. Note: To order tape packaging for Relays with surface-mounting terminals, add "(TR)" or "(TR5)" to the end of the model number. Absolute Maximum Ratings (Ta = 5 C) Item Symbol Unit Measurement conditions LED forward current IF 5 5 ma LED forward current reduction rate ΔIF/ C.5..5 ma/ C Ta 5 C LED reverse voltage VR 5 6 5 V Connection temperature TJ 5 C Load voltage (AC peak/dc) VOFF 6 V Continuous load current (AC peak/dc) IO 4 5 ma ON current reduction rate ΔIO/ C 4.. 5. ma/ C Ta 5 C Pulse ON current lop 5 ma t= ms, Duty=/ Connection temperature TJ 5 C Dielectric strength between I/O (See note.) VI-O 5 75 5 Vrms AC for min Ambient operating temperature Ta -4 to +85-4 to + -4 to +5 C With no icing or Ambient storage temperature Tstg -55 to +5 C condensation Soldering temperature 6 C s Note:. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Input Output
Electrical Characteristics (Ta = 5 C) Input Output Item Symbol Unit Measurement conditions... LED forward VF Typical.5.7.5 V IF= ma voltage Maximum..4. Reverse current IR Maximum μa VR=5 V Capacitance CT Typical 5 pf V=, f= MHz between terminals Trigger LED forward current Release LED forward current Maximum resistance with output ON Current leakage when the relay is open Capacitance between terminals Capacitance between I/O terminals Insulation resistance between I/O terminals Turn-ON time Turn-OFF time IFT (IFC) (See note ) IFC (IFT) (See note ) RON ILEAK Typical.6.4..6 Maximum.... Typical..5 Typical 5 Maximum 5.5 Typical Maximum COFF Typical pf ma ma Ω na /6G/6G : IO=4 ma : IO= ma : IO=5 ma : IOFF= μa /6G/6G/ 6VY/6VY: IOFF= μa : IO=5 ma :IF=5 ma, IO=4 ma :IF= ma, IO=4 ma :IF=.5 ma, IO=4 ma, t<s :IF= ma, IO= ma, t<s :IF=5 ma, IO=5 ma : IO=5 ma VOFF=6 V /6G/6G/ 6VY/6VY: V=, f= MHz : V=, f= MHz, IF=5 ma CI-O Typical.8 pf f= MHz, VS= V RI-O Typical 8 Typical.8.5.6. Maximum 8 5 Typical...7 Maximum.5 5.5 MΩ ms VI-O=5 VDC, ROH 6% /6G:IF=5 ma, RL= Ω, VDD= V (See note.) :IF= ma, RL= Ω, VDD= V (See note.) :IF=.5 ma, RL= Ω, VDD= V (See note.) :IF= ma, RL= Ω, VDD= V (See note.) :IF=5 ma, RL= Ω, VDD= V (See note.) SOP GVM-6@G@/6VY@ Note:. Turn-ON and Turn-OFF Times /G/G/VY/VY IF 4 RL IF VDD IF VOUT VOUT % 9% VOUT % 9% t ON t OFF t ON t OFF Note:. These values are for Relays with NC contacts Recommended Operating Conditions For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute Maximum Ratings and Electrical Characteristics. Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions. Item Symbol Unit Load voltage (AC peak/dc) VDD Maximum 48 V 5 5 Operating LED forward current IF Typical 7.5.5 5 7.5 ma Maximum 5 5 5 Continuous load current (AC peak/dc) IO Maximum 4 8 5 Ambient operating temperature Ta C Maximum 65 85 Spacing and Insulation Item GVM-6@G@ GVM-6VY@ Creepage distances 4. 5. Clearance distances 4. 5. Internal isolation thickness.. Unit mm
SOP GVM-6@G@/6VY@ GVM-6@G@/6VY@ Engineering Data LED forward current vs. I F - Ta (Maximum value) 6 5 4-4 /6G /6VY - 4 6 8 Continuous load current vs. On-state voltage /6G/6G/6VY/6G I O - V ON Continuous load current IO (ma) 6 5 4 - - - -4-5 -6 On-state resistance vs. /6G/6G/6VY/6G R ON - Ta On-state resistance RON (Ω) Turn ON, Turn OFF time vs. LED forward current /6G/6G t ON, t OFF - I F Turn ON, Turn OFF time, (μs).5.5.5 /6VY: Ta=5 C, IF=5mA : Ta=5 C, IF=mA : Ta=5 C, IF=mA, t<s : Ta=5 C -.5.5 On-state voltage VON (V) -4-4 6 8 : IO=4mA, IF=5mA, t<s : IO=4mA, IF=mA, t<s : IO=4mA, IF=.5mA, t<s : IO=5mA, t<s : IO=5mA, IF=5mA, t<s Ta=5 C VDD=V RL=Ω. Continuous load current vs. I O - Ta (Maximum value) Continuous load current IO (ma) Continuous load current IO (ma) On-state resistance RON (Ω) 6 5 4-5 5-5 - Ta=5 C, IF=5mA, t<s /6VY/6VY t ON, t OFF - I F /6G/6G 4 6 8 I O - V ON -5 - - On-state voltage VON (V) Turn ON, Turn OFF time, (μs) 5 5 5 IO=mA IF=mA t<s R ON - Ta - 4 6 8 GVM- 6VY /6VY: Ta=5 C, VDD=V, RL=Ω : Ta=5 C, VDD=V, RL=Ω. LED forward current vs. LED forward voltage I F - V F Ta=5 C..8..4.6 LED forward voltage VF (V) Trigger LED forward current vs. Trigger LED forward current IFT (ma).5.5.5 I FT - Ta : IOFF=µA The others: IO=Continuous Load Current Ratings, t<s GVM- 6VY GVM- 6VY.5-4 - 4 6 8
Engineering Data Turn ON, Turn OFF time vs. /6G/6G/6VY t ON, t OFF - Ta Turn ON, Turn OFF time, (μs) Current leakage vs. Current leakage ILEAK (na) GVM- 6G /6VY: VDD=V, RL=Ω, IF=5mA : VDD=V, RL=Ω, IF=mA : VDD=V, RL=Ω -4-4 6 8. VOFF=6V I LEAK - Ta.. -4-4 6 8 Turn ON, Turn OFF time, (μs) /6VY t ON, t OFF - Ta : VDD=V, RL=Ω, IF=.5mA : VDD=V, RL=Ω, IF=mA -4-4 6 8 Current leakage vs. Load voltage /6VY I LEAK - V OFF Current leakage ILEAK (na)..8.6.4...8.6.4 Ta=5 C. 4 5 6 Load voltage VOFF (V) SOP GVM-6@G@/6VY@ 4
Appearance/Terminal Arrangement/Internal Connections Appearance SOP (Small Outline Package) Terminal Arrangement/Internal Connections (Top View) /6G/6G/6VY/6VY OMRON logo Pin mark 9 Mold pin mark (See note.) Model name (See note.) LOT.NO. Special (/6VY) Pin mark OMRON logo SOP -6VY 9 Mold pin mark (See note.) LOT.NO. Model name (See note.) Note:. The actual product is marked differently from the image shown here. Note:. GVM does not appear in the model number on the Relay. Note:. The indentation in the corner diagonally opposite from the pin mark is from a pin on the mold. Dimensions (Unit: mm) GVM-6@G@/6VY@ SOP (Small Outline Package) Surface-mounting Terminals Weight:. g 4.4±.5 Actual Mounting Pad Dimensions (Recommended Value, Top View).9±.. max..5 6 to 6.. Note: The actual product is marked differently from the image shown here..4±..54±.5.±..6±. 7.±.4.8.54 Special *(/6VY) Surface-mounting Terminals Weight:. g 4.55±.5 Actual Mounting Pad Dimensions (Recommended Value, Top View).7±.5.±..5 6 to 6...54 * The external dimensions are different from those of the standard, but the mounting pad dimensions are the same. Note: The actual product is marked differently from the image shown here..4±..54±.5.±..5 max. 7.±.4.8 Approved Standards UL recognized Model Approved Standards Contact form File No. UL recognized a (SPST-NO) UL certification is pending E8555 Safety Precautions Refer to the Common Precautions for All for precautions that apply to all. 5
SOP GVM-6@G@/6VY@ Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. K8-E- 86(6)(O) 6