The RD family of LED Downlights takes all of the features that made the RDL the best wet label, vandal resistant downlight on the market and incorporates the energy efficiency and lumen package of the Xicato lumen IP66 rated module.the Xicato module has a CRI > 80 and a rated life of 50,000 hours. The RD family carries a 5 year warranty. Fixtures comply with LM79 and LM80. listed IP65 RD Family of LED Downlights IP65 Vandal Resistant Wet Label lm Xicato Down light RDO RDD RDP RDW RDR RDO /4 7 79 Trenton Avenue Frenchtown, NJ 0885 Tel: (908) 996-770 Fax: (908) 996-704
RDO. Open bottom, sealed top of cone. lm Xicato LED module CRI > 80.8Ga zinc coated steel housing. Low copper alloy die cast trim ring. Nuventix diaphragm cooling device. Integral electronic power supply. 3/6 thick polycarbonate lens. Cone is available in white, black and specular finish.. listed wet label. complies with LM79 and LM80 Series LED Module Lens Cone Optic Ballast Trim Finish RDO 307 = Lum/700K -Standard W-White 5-5 Medium C- 0-77vAC w/ 0-0v Dimming W0-White 3030 = Lum/K B-Black Anodized - Wide Note: 0v only if using 00-Semi Gloss Black 3035 = Lum/3500K 3040 = Lum/4000K S-Specular Alum trailing edge dimmer. Note: Lower lumen packages available. Contact factory for information.
RDD Clear Bottom Lens with Center Diffusing Dot RDD, RDP, RDW. Closed bottom (various options). lm Xicato LED module CRI > 80.8Ga zinc coated steel housing. Low copper alloy die cast trim ring. Nuventix diaphragm cooling device. Integral electronic power supply. 3/6 thick polycarbonate lens. Cone is available in white, black and specular finish.. listed wet label. complies with LM79 and LM80 RDP Clear Polycarbonate Bottom Lens RDW Translucent White Opal Lens Series RDD-Clear Poly Lens w/ Opal Center RDP-Clear Poly Lens RDW-Opal Poly Lens LED Module Lens Cone Optic Ballast Trim Finish 307 = Lum/700K -Standard W-White 5-5 Medium C- 0-77vAC w/ 0-0v Dimming W0-White 3030 = Lum/K B-Black Anodized - Wide 00-Semi Gloss Black Note: 0v only if using 3035 = Lum/3500K S-Specular Alum trailing edge dimmer. 3040 = Lum/4000K Note: Lower lumen packages available. Contact factory for information.
RDR. Retro fit kit for RDL/RHL fixtures. Xicato LED module 700mA 0 lm 9W (083 Delivered lumens). Low copper alloy die cast trim ring. Integral passive heatsink. Integral electronic power supply. 3/6 thick polycarbonate lens. Cone is available in white finish.. listed wet label. Complies with LM79 and LM80 Series LED Module Lens Cone Ballast Trim Finish RDR - CLEAR POLY LENS 307-0 LUM/700K 3030-0 LUM/K 3035-0 LUM/3500K 3040-0 LUM/4000K -Standard W-White C-0-77vAC w/0-0v Dimming W0- White Note: Lower lumen packages available. Consult factory for information.
RDO Open Bottom Wet Label LED Downlight Nuxentix cooling Xicato module Reflector Polycarbonate lens Silicone sealed Cone Die cast trim RDD, RDP, RDW Closed Bottom Wet Label LED Downlight Nuxentix cooling Xicato module Reflector Open top Cone Die cast trim Closed bottom with 3/6 polycarbonate lens
RDO RDD, RDP, RDW
RDR PHOTOMETRICS RDR 3
RDO RDD PHOTOMETRIC FILENAME : RDO LED 5B OPEN BOTT SEALED TOP CONE CLEAR POLY.IES IESNA:LM-63-00 [TESTLAB] Photopia 3..3 see: www.ltioptics.com/ies [TEST] [TESTDATE] Wed Dec 04 :7:08 03 [LUMINAIRE] RDO-3035--W-5-C-XX [LENS] OPEN BOTTOM, SEALED TOP CLEAR POLY LENS PHOTOMETRIC FILENAME : RDO LED 5B OPEN BOTT SEALED TOP CONE CLEAR POLY.IES 5609 407 804 40 PHOTOMETRIC FILENAME : RDD LED 5B CLEAR CLOSED BOTT WITH OPAL CENTER DOT.IES IESNA:LM-63-00 [TESTLAB] Photopia 3..3 see: www.ltioptics.com/ies [TEST] [TESTDATE] Thu Dec 05 4:08:55 03 [LUMINAIRE] RDD-3035--W-5-C-XX [LENS] CLOSED BOTTOM CLEAR POLYCARBONATE LENS WITH OPAL CENTER DOT PHOTOMETRIC FILENAME : RDD LED 5B CLEAR CLOSED BOTT WITH OPAL CENTER DOT.IES 659 06 553 Spacing Criterion (0-80) Spacing Criterion (90-70) Luminous Length (0-80) Luminous Width (90-70) ( lamp) 34 77 % 5.00 0.60 0.58 0.6 w/sides.06 ft 0.53 ft Maximum Candela = 5608.83 Located At Horizontal Angle = 0, Vertical Angle = 0 # - Vertical Plane Through Horizontal Angles (0-80) (Through Max. Cd.) # - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.) Spacing Criterion (0-80) Spacing Criterion (90-70) Luminous Length (0-80) Luminous Width (90-70) ( lamp) 43 75 % 50.00.38.38.4.06 ft Maximum Candela =.63 Located At Horizontal Angle = 67.5, Vertical Angle = 0 # - Vertical Plane Through Horizontal Angles (67.5-47.5) (Through Max. Cd.) # - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.) PHOTOMETRIC FILENAME : RDO LED B OPEN BOTT SEALED TOP CONE CLEAR POLY.IES IESNA:LM-63-00 [TESTLAB] Photopia 3..3 see: www.ltioptics.com/ies [TEST] [TESTDATE] Thu Dec 05 5:5:0 03 [LUMINAIRE] RDO-3035--W--C-XX [LENS] OPEN BOTTOM, SEALED TOP CLEAR POLY LENS PHOTOMETRIC FILENAME : RDO LED B OPEN BOTT SEALED TOP CONE CLEAR POLY.IES 4058 3043 09 04 PHOTOMETRIC FILENAME : RDD LED B CLEAR CLOSED BOTT WITH OPAL CENTER DOT.IES IESNA:LM-63-00 [TESTLAB] Photopia 3..3 see: www.ltioptics.com/ies [TEST] [TESTDATE] Thu Dec 05 4:4:3 03 [LUMINAIRE] RDD-3035--W--C-XX [LENS] CLOSED BOTTOM CLEAR POLYCARBONATE LENS WITH OPAL CENTER DOT PHOTOMETRIC FILENAME : RDD LED B CLEAR CLOSED BOTT WITH OPAL CENTER DOT.IES 80 357 905 Spacing Criterion (0-80) Spacing Criterion (90-70) Luminous Length (0-80) Luminous Width (90-70) ( lamp) 33 77 % 5.00 0.80 0.78 0.74.06 ft Maximum Candela = 4057.59 Located At Horizontal Angle = 0, Vertical Angle = 0 # - Vertical Plane Through Horizontal Angles (0-80) (Through Max. Cd.) # - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.) Spacing Criterion (0-80) Spacing Criterion (90-70) Luminous Length (0-80) Luminous Width (90-70) ( lamp) 07 69 % 46.00.38.38.4.06 ft Maximum Candela = 809.7 Located At Horizontal Angle =, Vertical Angle = 5 # - Vertical Plane Through Horizontal Angles ( - 5) (Through Max. Cd.) # - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.) RDP RDW PHOTOMETRIC FILENAME : RDP LED 5B CLEAR POLY.IES PHOTOMETRIC FILENAME : RDP LED 5B CLEAR POLY.IES PHOTOMETRIC FILENAME : RDW LED 5B OPAL.IES PHOTOMETRIC FILENAME : RDW LED 5B OPAL.IES IESNA:LM-63-00 [TESTLAB] Photopia 3..3 see: www.ltioptics.com/ies [TEST] [TESTDATE] Thu Dec 05 4:44: 03 [LUMINAIRE] RDP-3035--W-5-C-XX [LENS] CLEAR POLY LENS 547 404 736 368 IESNA:LM-63-00 [TESTLAB] Photopia 3..3 see: www.ltioptics.com/ies [TEST] [TESTDATE] Thu Dec 05 4::36 03 [LUMINAIRE] RDW-3035--W-5-C-XX [LENS] OPAL LENS 694 50 347 73 Spacing Criterion (0-80) Spacing Criterion (90-70) Luminous Length (0-80) Luminous Width (90-70) ( lamp) 5 8 % 55.00 0.6 0.58 0.6.06 ft Maximum Candela = 547.3 Located At Horizontal Angle = 0, Vertical Angle = 0 # - Vertical Plane Through Horizontal Angles (0-80) (Through Max. Cd.) # - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.) Spacing Criterion (0-80) Spacing Criterion (90-70) Luminous Length (0-80) Luminous Width (90-70) ( lamp) 80 6 % 40.00..4.34.06 ft Maximum Candela = 693.65 Located At Horizontal Angle =.5, Vertical Angle = 5 # - Vertical Plane Through Horizontal Angles (.5-0.5) (Through Max. Cd.) # - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.) PHOTOMETRIC FILENAME : RDP LED B CLEAR POLY.IES PHOTOMETRIC FILENAME : RDP LED B CLEAR POLY.IES PHOTOMETRIC FILENAME : RDW LED B OPAL.IES PHOTOMETRIC FILENAME : RDW LED B OPAL.IES IESNA:LM-63-00 [TESTLAB] Photopia 3..3 see: www.ltioptics.com/ies [TEST] [TESTDATE] Thu Dec 05 5:55:3 03 [LUMINAIRE] RDP-3035--W--C-XX [LENS] CLEAR POLY LENS 46 3 080 040 IESNA:LM-63-00 [TESTLAB] Photopia 3..3 see: www.ltioptics.com/ies [TEST] [TESTDATE] Thu Dec 05 4::5 03 [LUMINAIRE] RDW-3035--W--C-XX [LENS] OPAL LENS 646 484 33 6 Spacing Criterion (0-80) Spacing Criterion (90-70) Luminous Length (0-80) Luminous Width (90-70) ( lamp) 360 79 % 5.00 0.78 0.76 0.7.06 ft Maximum Candela = 460.9 Located At Horizontal Angle = 90, Vertical Angle = 5 # - Vertical Plane Through Horizontal Angles (90-70) (Through Max. Cd.) # - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.) Spacing Criterion (0-80) Spacing Criterion (90-70) Luminous Length (0-80) Luminous Width (90-70) ( lamp) 709 57 % 38.00.4.4.36.06 ft Maximum Candela = 6.58 Located At Horizontal Angle = 0, Vertical Angle = 5 # - Vertical Plane Through Horizontal Angles (0-80) (Through Max. Cd.) # - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.)
79 Trenton Avenue Frenchtown, NJ 0885 Tel: (908) 996-770 Fax: (908) 996-704