Product Summary McLaren Technology Centre Chertsey Road Woking Surrey GU21 4YH UK Suite 115 Bostick Building 9801 West Kincey Avenue Huntersville NC 28078 USA 2014 Revision Date: 24 Oct 2011 Page 1 of 7
The K-type alternator has a specially wound stator to achieve high power output in a small, low weight package. High current diodes are used in the rectifier and internal fans provide forced air cooling. The output is controlled by a regulator inside the alternator. The units are assembled with stiff brush springs and extra flexible wire to connect the stator to the rectifier. The stator is pegged to the body and all screws are locked. High quality bearings are used to enable the alternators to run at high speeds (up to 18,000 rpm). The standard mounting method is intended for a belt drive, but the alternator may also be driven directly, if required. Please request our installation datasheet for further details. Electrical Output voltage 13.5V DC Nominal output current High 200A (cut in speed 2500rpm) Medium 165A (cut in speed 2000rpm) Standard 110A (cut in speed 1300rpm) Ignition quiescent current 300mA * A detailed performance chart is shown later in this document. * If alternator is continuously connected to the battery this quiescent current draw may drain the battery Mechanical Aluminium alloy body Maximum speed 18000rpm Clockwise or anti clockwise rotation available Weight <4.9kg Potted elastomer boot for strain relief of cable Design and manufacture is in-house, so if our existing designs do not suit your application, we can provide cost effective customised parts to suit even the most demanding application. For example: Through bored mounting holes High accuracy machining of mounting flanges Alternative cable entry locations Alternative connectors The regulator/rectifier unit may be rotated through 90, 180 or 270 Hard-wire back-up of the regulator is also available if requested. Please contact our technical consultancy service who will be pleased to help. Connection Definition 22AWG cable (where fitted) Cable length is shown on the order details but any length is available on request Various automotive and military standard connectors are available Positive power output M8 stud (B+ terminal) Ground connection for power and regulator is through the case. Ensure that the case has a high current, low resistance connection to vehicle ground. Cable connection: USA: 2014 Revision Date: 24 Oct 2011 Page 2 of 7
Green wire Pin A Pin 1 Ignition Red wire Pin B Pin 2 Sense White wire Pin C Pin 3 Lamp Single connection The Ignition and Sense connections for the single connection alternators are through the power output stud (B+ terminal) Environmental Splash resistant to standard motorsport fluids Viton jacketed cable Continuous ambient operating temperature -30 to +90 C Maximum ambient temperature 110 C short term, providing the following temperatures are not exceeded: Stator 200 C Diodes 175 C Regulator 115 C Bearings 150 C Output in Amps Nominal Current Rating Standard 110A Medium 165A High 200A Cut in Speed 1300rpm 2000rpm 2500rpm Ambient Temperature 25 C (@13.5V) 90 C (@12.5V) 25 C (@13.5V) 90 C (@12.5V) 25 C (@13.5V) 90 C (@12.5V Speed (rpm) 2500 60 50 20 27 0 0 3000 80 70 50 55 45 50 5000 100 90 125 123 135 125 7500 110 90 148 140 175 155 10000 120 90 165 147 200 180 12500 120 90 178 157 220 190 15000 120 90 190 170 235 200 McLaren Electronics can service and repair alternators. Please contact our technical consultancy service for more information. USA: 2014 Revision Date: 24 Oct 2011 Page 3 of 7
Standard K-Type 110A Clockwise 300mm ASL6-06-05PN-HE O 030 650 013 017 Standard K-Type 165A Clockwise 300mm ASL6-06-05PN-HE O 030 650 013 000 Standard K-Type 200A Clockwise 300mm None O 030 650 013 030 Standard K-Type 200A Clockwise 300mm ASL6-06-05PN-HE O 030 650 013 001 Standard K-Type 165A Anti-clockwise 300mm ASL6-06-05PN-HE O 030 650 013 019 Standard K-Type 165A Anti-clockwise 300mm None O 030 650 013 022 Standard K-Type 200A Anti-clockwise 300mm ASL6-06-05PN-HE O 030 650 013 004 Standard K-Type 110A Anti-clockwise 300mm ASL6-06-05PN-HE O 030 650 013 051 Standard K-Type 200A Clockwise 500mm None O 030 650 013 080 USA: 2014 Revision Date: 24 Oct 2011 Page 4 of 7
Standard K-Type 165A Clockwise 500mm None O 030 650 013 002 Standard K-Type 200A Clockwise 500mm None O 030 650 013 016 Standard K-Type 200A Clockwise 300mm ASL6-06-05PN-HE O 030 650 013 005 Standard K-Type 200A Anti-clockwise 300mm ASL6-06-05PN-HE O 030 650 013 006 Standard K-Type 165A Anti-clockwise 200mm AS6-07-98PB-HE O 030 650 013 039 Standard K-Type 200A Anti-clockwise 300mm AS6-07-98PB O 030 650 013 050 USA: 2014 Revision Date: 24 Oct 2011 Page 5 of 7
Standard K-Type 165A Clockwise 500mm None O 030 650 013 014 Standard K-Type 165A Anti-clockwise 500mm None O 030 650 013 033 Standard K-Type 200A Clockwise 500mm None O 030 650 013 083 Standard K-Type 165A Clockwise 500mm None O 030 650 013 026 Standard K-Type 165A Clockwise 600mm None O 030 650 013 045 Standard K-Type 200A Anti-clockwise 500mm None O 030 650 013 060 Standard K-Type 165A Anti-clockwise 500mm None O 030 650 013 079 USA: 2014 Revision Date: 24 Oct 2011 Page 6 of 7
Standard K-Type 200A Anti-Clockwise 300mm AS6-07-98PB O 030 650 013 054 Standard K-Type 200A Clockwise 300mm AS6-07-98PB O 030 650 013 087 Description Output Rotation Connector Ordercode Single Connection K- Type 200A Clockwise None O 030 650 013 036 USA: 2014 Revision Date: 24 Oct 2011 Page 7 of 7