Manufacturer & Exporter of: Cleaning Equipments such as Flexible Shafts, Brushes, Cutters, Expanders, Construction Equipments Concrete Vibrators, Flexible shaft Grinders & Accessories.
SERRATING / GROOVING TOOL BST SERIES FOR GROOVING IN TUBE SHEETS High production tool. Ideal for use where tool is needed per bore. One piece cryogenically treated tool bit ensures maximum life. Its suited for CNC application on account of piece mandrel construction & short design. Note: Grooving tools are available for MM bore sizes also, please enquire. Sizes Available : /8 O.D. to./ O.D. Tool Bit /8 x /8 x/8 or /8 x /4 x /8 /8 ½ 5/8 /4 7/8./4././ 9.5.70 5.87 9.05. 5.40.75 8.0 Tool BST-75-970 BST-500-70 BST-65-588 BST-750-900 BST-875-0 BST-000-540 BST-50-75 BST-500-80 BST-000-5080 BST-500-650 /8 x/4 x/8 /8 x /8 x /8 Special Spacing BST-70-S BST-70 BST-70-SPEC BST-500-S BST-500 BST-500-SPEC BST-60-S BST-60 BST-60-SPEC SERRATING / GROOVING TOOL BNW SERIES Note : Serrating Tools are available for MM bore sizes also. Please enquire. Simple to change cutter for different groove shapes. Changing of pilot nose & cutter allows one tool to cover a range of hole diameters. Location & depth of cut easy to adjust. Only light pressure required to cut precision grooves. Ready to fit CNC drill machines, lathe and boring machines. The life of the cutter extendable by re- shapening. Sizes Available : /8 O.D. To./ O.D. Bore Range /8-./4 5/8-./4 /4-.7/8./-4 9-6-45 9-48 8-0 Tool BNW- MT BNW- MT 4 BNW-4 MT 6 BNW-5 MT Pilot Nose BNW - PN BNW - PN 4 BNW - PN 6 BNW - PN Circular Form Cutter BNW - CF BNW - CF 4 BNW - CF 6 BNW - CF Tool Bit Holder BNW - TBH BNW - TBH 4 BNW - TBH 6 BNW - TBH Spare Tool Bit BNW - TB BNW - TB 4 BNW - TB 6 BNW - TB Note : Specify whether you need Circular Form Cutter (one piece HSS construction ) or Tool Bit, when ordering. Refer to operation manual for spare parts list.
SERRATING / GROOVING TOOL BSGT SERIES Simple to change cutter for different groove shapes. Changing of pilot nose & cutter allows one tool to cover a range of hole diameters. Location & depth of cut easy to adjust. Only light pressure required to cut precision grooves inside holes or cylinders. The life of the cutter extendable by reshapening. Sizes Available : /8 O.D. To O.D. Bore Range Tool Pilot Nose / Brushing Tool Bits 0.40-0.5 0 - BSGT - 0 BSGT - 0 - PN BSGT - 0 - TB 0.50-0.6.7-6 BSGT - BSGT - - PN BSGT - - TB 0.6-0.79 6-0 BSGT - 6 BSGT - 6 - PN BSGT - 6 - TB 0.75 -.6 9 - BSGT - 9 BSGT - 9 - PN BSGT - 9 - TB.8 -.05 0-5 BSGT - BSGT - - PN BSGT - - TB.97 -.07 50-78 BSGT - 504 BSGT - 504 - PN BSGT - 504 - TB PLEASE SUPPLY FOLLOWING INFORMATION WHEN ORDERING GROOVING TOOLS OR SPARE CUTTERS. A) Bore Dia after reaming with Tolerances D B) Plate Thickness T C) Distance of First Groove L D) Total Number of Grooves N E) Spacing of Grooves L,L F) Groove Width W G) Diameter of Grooves D H) Groove undercut Depth G
TUBE SHEET HOLE REAMER Ideal for heat exchanger and condenser tube sheet reaming. High speed steel, cryogenically treated & coated with Titanium, Nitride for long life. Reamers are available in MM sizes also. For larger diameters, please enquire. /8 9.5 Reamer Size To TEMA Specification.80 9.65 /.70.505.8 5/8 5.87.6 6.0-6.00.66 6.6 /4 9.05.758 9.5-0.00.795 0.0 -.00.875. 7/8..88.4-5.00.994 5.5 5.40.00 5.65./8 8.57.6 8.86./4.75.6.07 Model No BRM-095/66 BRM-095/0 BRM-095/5 BRM-7/76 BRM-7/0 BRM-7/5 BRM-58/87 BRM-58/5 BRM-58/0 BRM-60/5 BRM-60/0 BRM-60/5 BRM-90/00 BRM-90/5 BRM-90/0 BRM-00/00 BRM-00/5 BRM-00/0 BRM-0/07 BRM-0/5 BRM-0/0 BRM-/07 BRM-/5 BRM-/0 BRM-50/5 BRM-50/0 BRM-50/54 BRM-54/5 BRM-54/0 BRM-54/54 BRM-85/4 BRM-85/0 BRM-85/54 BRM-7/ BRM-7/0 BRM-7/54 Flute Length.60.97.99.97.4.4.90.90 4. 4. 4.5 0.00 66 0 5 76 0 5 87 5 0 87 5 0 00 5 0 00 5 0 07 5 0 07 5 0 5 0 54 Inch 5.70 7. 9. 6.4 7. 9. 7.6 9.9 7.87 9.9 7.87 9.9 8.5 9.9 8.5 9.9 8.5 9.9 9.5.99 5.00 OAL Mm 46 8 56 8 87 5 87 5 00 5 00 5 07 5 07 5 4 0 8 4.5 5 9.5 4 0.99 0 0.00 54 5.00 8 4.88 4 9.88 5 0.99 0 0.00 54 5.00 8 5..5 9 0 4.9 6 0.00 54 6.0 44 Shank Morse Taper # 4
TUBE END FACER- BTEF SERIES Tool bits are coated with Titanium Nitride to give times the life of conventional tool bits. Ideal for quick facing of projecting tube ends in heat exchanger, condensers & boilers. One size of tool is suitable for use on multiple tube thickness by interchanging pilot. (TEF- 75 is the exception with the tool suitable for one tube ID only.) Each tool is supplied with a set of multiple pilots to cover tube thickness. end facers for MM sizes of tubes also available. Please enquire. /8 9.5 ½.07 5/8 5.87 /4 9.05 7/8. 5.40./8 8.57./4.75./8 4.9./ 8.0.5/8./4.7/8./4./ 4.7 44.45 47.6 57.5 Bwg 6-5-0 4-8 0-8 -8 BTEF-75 BTEF-500 BTEF-65 BTEF-750 BTEF-875 BTEF-000 BTEF-5 BTEF-50 BTEF-75 BTEF-500 BTEF-65 BTEF-750 BTEF-875 BTEF-000 BTEF-50 BTEF-500 Non-Ferrous or Carbon Stainless Steel s Steel s BTEF-76 BTEF-76 SS BTEF-506 BTEF-506 SS BTEF-66 BTEF-66 SS BTEF-756 BTEF-756 SS BTEF-876 BTEF-876 SS BTEF-006 BTEF-006 SS BTEF-6 BTEF-6 SS BTEF-56 BTEF-56 SS BTEF-76 BTEF-76 SS BTEF-506 BTEF-506 SS BTEF-66 BTEF-66 SS BTEF-756 BTEF-756 SS BTEF-876 BTEF-876 SS BTEF-006 BTEF-006 SS BTEF-56 BTEF-56 SS BTEF-506 BTEF-506 SS TUBE END FACER- BFB SERIES High speed production tools. Titanium Nitride coated tool bit can be reversed and used. Doubles tool bit life. /8 9.5 ½.07 5/8 5.87 /4 9.05 7/8. 5.40./8 8.57./4.75./8 4.9./ 8.0.5/8./4.7/8./4./ 4.7 44.45 47.6 57.5 Bwg 6-5-0 4-8 0-8 -8 BFB-75 BFB-500 BFB-65 BFB-750 BFB-875 BFB-000 BFB-5 BFB-50 BFB-75 BFB-500 BFB-65 BFB-750 BFB-875 BFB-000 BFB-50 BFB-500 Non-Ferrous or Carbon Stainless Steel s Steel s BFB-76 BFB-76 SS BFB-506 BFB-506 SS BFB-66 BFB-66 SS BFB-756 BFB-756 SS BFB-876 BFB-876 SS BFB-006 BFB-006 SS BFB-6 BFB-6 SS BFB-56 BFB-56 SS BFB-76 BFB-76 SS BFB-506 BFB-506 SS BFB-66 BFB-756 BFB-876 BFB-006 BFB-56 BFB-506 BFB-66 SS BFB-756 SS BFB-876 SS BFB-006 SS BFB-56 SS BFB-506 SS
TUBE END FACER- BFC SERIES / WELD REMOVAL TOOL./.5/8./4.7/8./4././4./4././4 8.0 4.7 44.45 47.6 57.5 69.85 76.0 8.55 88.90 95.5 Facer Fitted With Tool Bits BFC-500 BFC-65 BFC-750 BFC-875 BFC-000 BFC-50 BFC-500 BFC-750 BFC-00 BFC-50 BFC-500 BFC-750 BFC-500-TB BFC-65-TB BFC-750-TB BFC-875-TB BFC-000-TB BFC-50-TB BFC-500-TB BFC-750-TB BFC-00-TB BFC-50-TB BFC-500-TB BFC-750-TB 4 0.6 BFC-4000 BFC-4000-TB Tool uses cutting blades which can be configured for tube end facing or weld removal as step in the removal of welded tubes from the tube sheet. Tool fitted with MT shank for use with standard air or electric drills. Cutting blades are titanium Nitride coated to give times the life of conventional cutting blades. Ideally suited for work on larger diameter boiler tubes. Tools available for MM sizes of tubes also. Please enquire FLARING TOOL: BEADING TOOL Model bwg. No. /.70 6- BFT- 4-5 BFT- 5/8 5.87 6- BFT- 4-5 BFT-4 /4 9.05 6- BFT-5 4-5 BFT-6 7/8./8./4./8./. 5.40 8.57.75 4.9 8.0 6- -5 6- -5 6-8-4 BFT-7 BFT-8 BFT-9 BFT-0 BFT- BFT- 5- BFT- 8-4 BFT-4 5- BFT-5 8-4 BFT-6 5- BFT-7 Note : Fitted with Type round shank for use with standard pneumatic chipping hammer. Other shanks on request. / 5/8.70 5.87 /4 9.05 7/8. 5.40 bwg. 6-7 8-9 0-6-7 8-9 0-6-7 8-9 0-6-7 8-9 0- Model No. BBDT- BBDT- BBDT- BBDT-4 BBDT-5 BBDT-6 BBDT-7 BBDT-8 BBDT-9 BBDT-0 BBDT- BBDT- 6-7 BBDT- 8-9 BBDT-4 0- BBDT-5 Note : Fitted with Type round shank for use with standard pneumatic chipping hammer. Other shanks on request.
BELLING TOOL In many condensers the inlet end of tubes are required to be seated into the sheet (Not projecting). The contour is a Bell End or Trumpet Mouth of special shape. TUBE SHEET HOLE RADIUS CUTTER MM sizes and cutter with other radii are also available. Please enquire. High speed steel tool used in preparing tube sheets to suit the flaring or beading of tube ends outside of or flush with the tube sheet. Sizes Available : ½ O.D. TO./4 O.D. TUBE GUIDE To pilot tubes through the tube sheet & baffle plates during tube insertion. NOTE: For intermediate or larger size please contact us. Sizes Available : ½ O.D. TO./ O.D. TUBE SHEET HOLE BRUSH To clean tube sheet bores, prior to tube installation Can be used with any standard pneumatic or electric drill NOTE: For intermediate or larger size please contact us. Sizes Available : /4 O.D. TO O.D. NOTE: FOR MODEL NOS OF ABOVE TOOLS PLEASE CONTACT US. TIY INDUSTRIES WORKS: PLOT NO. 68, DIGVIJAY INDUSTRIAL ESTATE NO.. UPAVAN, POKHARAN ROAD NO., THANE (W) M.S. INDIA - 40060. OFFICE: G-0, USHA COMPLEX, KHANDELWAL MARG, BHANDUP (W.), MUMBAI -400078, INDIA PH.: +9--585 4509, 6505 6400, 566 64 FAX: +9--585 4509. Website: www.bharatflex.com, www.bharatiyaindustries.com, E-mail : bharatflex@yahoo.com Authorised Dealer