Microwave Gain Equalizers 50Ω DC to GHz EQY-SERIES The Big Deal Excellent Return Loss, 0dB typ. Wide bandwidth, DC - GHz Small Size, mm x mm CASE STYLE: MC131-1 Product Overview EQY series of absorptive Gain Equalizers are fabricated using highly repetitive GaAs IPD* MMIC process incorporating resistors, capacitors and inductors having negative insertion loss slope. EQYs are available with nominal attenuation slope of 1,,3,,5,, & 10 db. They are packaged in tiny x mm -Lead MCLP TM package. Key Features Feature Negative Insertion Loss Slope vs. Frequency Advantages Useful for compesating negative gain slope of amplifiers, receivers, transmitters to achieve flat gain versus frequency. Wide range of values 1,,3,,5,, & 10 db Enables circuit designer to change nominal insertion loss values without motherboard redesign making the EQY series ideal for select at test application. Wideband operation, DC to GHz Supports a wide array of applications including wireless cellular, microwave communications, satellite, defense and aerospace, medical broadband and optic applications. Excellent Power Handling Capability 31/3 dbm Enables its use at the output of a variety of amplfiers Small Size and simple to use ( mm x mm) As a single chip solution, the EQY series occupies less board space than a lumped element approach, minimizes component count and ensures repeatable performance over wide frequency range. *GaAs IPD (Gallium Arsenide Integrated Passive Device) Page 1 of 5
Microwave Gain Equalizer 50Ω db DC to GHz Product Features.5 db Slope Small Package x mm MCLP Wide Bandwidth, DC- GHz Excellent Return Loss, 0 db typ. Typical Applications Cellular PCS Communications Radar Defense CASE STYLE: MC131-1 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications General Description is an absorptive Gain Equalizer fabricated using highly repetitive GaAs IPD MMIC process incorporating resistors, capacitors and inductors having negative insertion loss slope. has a nominal attenuation slope of.5 db and is packaged in tiny x mm, -Lead MCLP TM package. simplified schematic & pad description TOP VIEW GND 1 7 GND 3 5 Function Pad Number Description RF-Input pad 7 RF-Output pad GND 1, & Paddle Ground 3- No connection, ground externally REV. OR M157 EQY--3+ GY/RS/CP 10 Page of 5
Electrical Specifications 1 at 5 C, 50Ω, unless otherwise noted. Parameter Condition (GHz) Min. Typ. Max. Units Frequency Range DC GHz Insertion Loss 0.01.7 7.0 7.3 db 1.1. 3.3. 3.0 1.5 5 0. 0. 0.5 1.0 0.01-1 1.0 :1 1-1.1-3 1. 3-1. - 5 1. 5-1. 1. Measured on Mini-Circuits Characterization Test Board TB-101--3+. See Characterization Test Circuit (Fig. 1) Absolute Maximum Ratings Operating Case Temperature -0 C to 5 C Storage Temperature -5 C to 150 C RF Input Power 3 dbm. Permanent damage may occur if any of these limits are excedeed. Characterization Test Circuit 1 3 DUT 7 5 Fig 1. Block Diagram of Test Circuit used for characterization. Test Board TB-101--3+ Conditions: Attenuation & Return Loss Pin=-10 dbm Product Marking index over pad 1 MCL EQ black body model family designation Marking may contain other features or characters for internal lot control Page 3 of 5
Typical Performance Data at 5 C Frequency (MHz) insertion Loss (db) Input (:1) Output (:1) 10.9 1.01 1.01 50.9 1.01 1.01 100.9 1.01 1.01 500.73 1.0 1.0 1000.0 1.0 1.0 150 5. 1.10 1.10 1750. 1.1 1.13 50 3.7 1.13 1.1 750.93 1.1 1.13 3000.57 1.1 1.1 350. 1.13 1.1 000 1.1 1.1 1.13 500 1.0 1.1 1.13 5000 0.73 1.1 1.1 5500 0.57 1.1 1.1 000 0.53 1.3 1. INSERTION LOSS 1. INSERTION LOSS (db) 1.3 1. 1.1 Input Output 0 0 1000 000 3000 000 5000 000 FREQUEY (MHz) 1.0 0 1000 000 3000 000 5000 000 FREQUEY (MHz) Page of 5
Additional Detailed Technical Information additional information is available on our dash board. To access this information click here Performance Data Case Style Tape & Reel Standard quantities available on reel Suggested Layout for PCB Design Evaluation Board Environmental Ratings Data Table Swept Graphs MC131-1 Plastic package, Lead finish: Matte-tin F 7 reels with 0, 50, 100, 00, 500,1K or K devices PL-57 TB-101--3+ ENV0T1 ESD Rating Human Body Model (HBM): Class (Pass 000V) in accordance with ANSI/ESD STM 5.1-001 Machine. MSL Test Flow Chart Start Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 0 C Soak 5 C/5RH 1 hours Bake at 15 C, hours Visual Inspection Electrical Test SAM Analysis Finish Additional Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, Standard Terms ); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits website at www.minicircuits.com/mclstore/terms.jsp Page 5 of 5