Contents Introduction Markets and Applications... 10-2 Internal Standard Documents Compliance... 10-2 Features and Benefits... 10-2 Product Range Overview... 10-2 S-Light Features... 10-3 Key Parameters... 10-3 Available Options... 10-3 to 10-4 Part Number Builder... 10-5 D-Light Key Parameters... 10-6 Available Options... 10-6 to 10-7 Part Number Builder... 10-8 to 10-10 Evaluation Boards and Tooling... 10-11 SECTION 10 TABLE OF CONTENTS 10-1
active OPTICS Introduction MARKETS AND APPLICATIONS D-Lightsys devices are robustly designed for use in harsh environment applications such as: With its D-Lightsys range, Radiall offers optical transceiver components dedicated to harsh environments within the aerospace, space and defense markets. The optoelectronic D-Lightsys modules are among the best performing in the world with very low power consumption and a minimum footprint. A complete range, from the transceiver to multichannel products, allows these devices to meet performance requirements in a large number of stringent applications. They are dedicated to high speed data communications and provide data rates from 0.1 to 10 Gbps. D-Lightsys modules offer high performance at very low consumption levels. Operational temperature from -55 C to +125 C and highly resistant to shock and vibrations, they can withstand the most demanding environments with unrivaled reliability. Modules are qualified per various MIL-AERO standards (ARINC 804) and are 100% tested over the whole operating temperature range. A full range of evaluation boards are also available for testing the D-Lightsys modules. Civil Aerospace Airframe, avionics, In-Flight Entertainment (IFE), Heads Up Display (HUD), Power and flight management, pressurized/unpressurized areas transmissions, sensors Military Aerospace Avionics, weapons systems, power and flight management, sensors Data Transmissions High speed data networking Radars Remote antennas, phase array radar, satellite Navy & Shipboard Missile systems, communication Geophysics Oil and gas, mining, exploration with streamers arrays, roofers and shearing equipment Aerospace Defense Industrial Medical INTERNATIONAL STANDARD DOCUMENTS COMPLIANCE - IEEE standard 802.3z Gigabit Ethernet 1000 Base-Sx PMD - ARINC 804, 815, and 818 standards - Control and monitoring compliant with SFF-8472 standard FEATURES AND BENEFITS - Data rate up to 10 Gbps - Use 850 nm VCSEL emitters - Control and monitor compliant with MSA SFF-8472 - Monitoring of the optical power of emitters over the temperature range - Low power consumption - Standard electrical SMT interface or solderless interface option - Pigtailed optical interconnect solutions (MultiMode fibers) - Very small form factor PRODUCT RANGE OVERVIEW D-lightsys products are divided in two main families: - S-light: single channel modules - D-light: multichannel modules 10-2
S-Light FEATURES - Uses 850 nm VCSEL'S - Controls and monitoring compliant with SFF-8472 standard - Monitoring of the optical power over the temperature range - Standard electrical SMT interface or pluggable interface option - Provided with 50/125 μm or 62.5/125 μm optical fiber The S-Light range includes single channel optical transceivers for harsh environment applications available in transmitter, receiver and transceiver modules. Several package options are offered from surface mount, pluggable and custom packages. All the D-Lightsys devices can be fully monitored and/or controlled through a I 2 C 2-wire serial interface and are suitable for a variety of applications: - Average and modulation currents of the VCSEL laser are both digitally programmable through the 2-wire serial interface. - A versatile input stage allows 100 Ω differential or 50 Ω to ground termination resistors to comply with CML or LVDS signaling levels. - Analog outputs allow the monitoring of the module state and performance. ACTIVE OPTICS KEY PARAMETERS Parameters Value Units Notes Data rate (max) 10 Gbps 2 ranges available 0.1-4.25 Gbps 0.5-10 Gbps Transceiver case operating temperature -55/+125 C Qualified temperature range -40 C/+90 C Power supply voltage 3.3 V Transceiver power consumption (max) <300 mw Over the full temperature range Average output power (min) -4 dbm Optical extinction ratio 9 db Optical sensitivity -20 dbm S-Light family transmitters are Class 1M laser products according to IEC 60825-1 standard @2.5 Gbps ER= 5 db @10 Gbps @2.5 Gbps, for BER=10-12 measured with a 2 7-1 PRBS signal -10 dbm @ 10 Gbps Detailed technical datasheets are available upon request. Please contact your local representative. AVAILABLE OPTIONS Part Definition Available Options Description Module type Transmitter Receiver Transceiver 1 emitting channel (1 fiber) 1 receiving channel (1 fiber) 1 emitting channel + 1 receiving channel (2 fibers) For any additional information, please contact your local Radiall representative. Reliability and qualification reports are available upon request. 10-3
active OPTICS S-Light Available Package Options 48 pin LCC package (Direct board soldering) 10 pin SFF package 40 pin SAMTEC YFT (Socket pluggable) Dimensions 40 pin SAMTEC YFT (Narrow socket) Available termini/connectors: - LuxCis ARINC 801/EN4639 - ABS1379/EN4531 - LC - FC - ST - SC Available optical fibers: - MultiMode 50/125 μm OM2 - MultiMode 62.5/125 μm For any additional information, please contact your local Radiall representative. 10-4
S-Light SINGLE-channel OPTICAL TRANSMITTERS, RECEIVERS AND TRANSCEIVERS FOR HARSH ENVIRONMENTS Part number builder SLx-www-Ix-Pyz-Lvv vv: Pigtail length z: Optical cable Length in cm N: Nexans 132574 (62.5/125/900 µm) G: Gore FON1307 (50/125/1200 µm) H: Gore FON1371 (62.5/125/1200 µm) ACTIVE OPTICS y: Pigtail termini X: 2 LuxCis Termini (ARINC801) E: 2 ABS1379 Termini Contact sales for additional connector options x: Packaging option L: 48-Pin LCC package GY: 8x5 YFT-08-05-H-05-SB socket GN: 8x5 YFT-08-05-H-05-SB socket _ smaller package Contact sales for additional connector options www: data rate 251: Up to 4.25 Gbps 1001: Up to 10 Gbps x: Module type T: Transmitter R: Receiver M:Transceiver To validate your part number please contact your local Radiall representative. Technical datasheets are available upon request. 10-5
active OPTICS D-Light KEY PARAMETERS Parameters Value Units Notes Data rate (Max) 10 Gbps Transceiver case operating temperature Power supply voltage 3.3 V Transceiver power consumption (Max) Average output power (min/channel) Several ranges available For emitters & receivers: 0.1-4.5 Gbps (per channel) 0.5-10 Gbps (per channel) For transceivers: 0.1-3.25 Gbps (per channel) 0.5-10 Gbps (per channel) -55/+100 C Qualified temperature range -40 C/+85 C 125 mw Over the full temperature range per channel -4 dbm Optical extinction ratio 9 db The D-Light range includes multi channel optical transceivers for harsh environment applications available in transmitter, receiver and transceiver modules with 4 channels (4 Rx + 4 Tx). Several package options are offered from surface mount to pluggable packages. D-Light family transmitters are Class 1M laser products according to IEC 60825-1 standard @2.5 Gbps Optical sensitivity -19 dbm @2.5 Gbps, for BER=10-12 measured with a 2 7-1 PRBS signal -16 dbm @ 3.25 Gbps -12 dbm @ 10Gbps AVAILABLE OPTIONS Part Definition Available Options Description Module type Transmitter Receiver Transceiver 2 or 12 emitting channels 2 or 12 receiving channels 4 emitting channels + 4 receiving channels Reliability and qualification reports are available upon request. For any additional information, please contact your local Radiall representative. 10-6
D-Light Available Package Options 48 pin LCC package 100 pins package Dimensions ACTIVE OPTICS Available termini/connectors: - 12 channels optical connector: MPO and/or connector compliant with IEC Standard 61754-7 and TIA 604-5 - 12 channels optical ferrule: MT ferrule only or MT ferrule with Radiall MT cartridge Available optical fibers: - MultiMode 50/125 μm OM2 - ribbon 12 fibers (single fiber cable is available for DLR-02/DLT-02) - MultiMode 62.5/125 μm - ribbon 12 fibers (single fiber cable is available for DLR-02/DLT-02) For any additional information, please contact your local Radiall representative. 10-7
active OPTICS D-Light MULTI-CHANNEL OPTICAL TRANSMITTERS FOR HARSH ENVIRONMENTS Part number builder DLT-cc-www-Ix-Pyz-Lvv vv: Pigtail Length z: Fiber Diameter Length in cm 1: 50/125 μm bare ribbon fiber 2: 62.5/125 μm bare ribbon fiber y: Connector Type N: MT ferrule only O: MPO connector C: MT ferrule with MT-Cis Contact sales for additional connector options x: Packaging Option L: 48-Pin LCC package GM: 100-Pin Meg-Array socketed package GN: 8x5 YFT-08-05-H-05-SB socket (only for 2 channels) www: Data Rate 251: Up to 4.25 Gbps 1000: Up to 10 Gbps cc: Number of Channels 02: 2 channels 04: 4 channels 12: 12 channels To validate your part number please contact your local Radiall representative. Technical datasheets are available upon request. 10-8
D-Light MULTI-CHANNEL OPTICAL RECEIVERS FOR HARSH ENVIRONMENTS Part number builder DLR-cc-www-Ix-Pyz-Lvv vv: Pigtail Length Length in cm z: Fiber Diameter 1: 50/125 μm bare ribbon fiber 2: 62.5/125μm bare ribbon fiber ACTIVE OPTICS y: Connector Type N: MT ferrule only O: MPO connector C: MT ferrule with MT-Cis Contact sales for additional connector options x: Packaging Option L: 48-Pin LCC package GM: 100-Pin Meg-Array socketed package GN: 8x5 YFT-08-05-H-05-SB socket (only for 2 channels) www: Data Rate 251: Up to 4.25 Gbps 1000: Up to 10 Gbps cc: Number of Channels 02: 2 channels 04: 4 channels 12: 12 channels To validate your part number please contact your local Radiall representative. Technical datasheets are available upon request. 10-9
active OPTICS D-Light MULTI-CHANNEL OPTICAL TRANSCEIVERS FOR HARSH ENVIRONMENTS Part number builder DLM-cc-www-Ix-Pyz-Lvv vv: Pigtail Length Length in cm z: Fiber Diameter 1: 50/125 μm bare ribbon fiber 2: 62.5/125 μm bare ribbon fiber y: Connector Type N: MT ferrule only O: MPO connector C: MT ferrule with MT-Cis Contact sales for additional connector options x: Packaging Option L: 48-Pin LCC package GM: 100-Pin Meg-Array socketed package www: Data Rate 251: Up to 4.25 Gbps 1000: Up to 10 Gbps cc: Number of Channels 04: 4 channel transceiver (4Tx + 4Rx) To validate your part number please contact your local Radiall representative. Technical datasheets are available upon request. 10-10
Evaluation Boards and Tooling general evaluation board specifications Radiall offers a full range of evaluation boards enabling full monitoring of S-Light and D-Light modules, either for the pluggable package or for the LCC package. A Windows PC-Based software is available for complete module monitoring and control. Application notes for layout considerations are also available. Please contact your local representative for more information. Parameter Symbol Min Type Max Unit External supply voltage VCC 1.2 7.0 15 V Supply voltage noise NVCCx - - 150 mv Supply current (Tx + Rx) ICC - - 500 ma Operating temperature Top -40 - +100 C ACTIVE OPTICS 10-11
NOTES Notes 10-12