Proportional Directional Control Valves Size 6 Direct controlled, electrically adjustable Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 750055.06.02.06 Description (standard units) Design The proportional directional control valve size 6 is based on the 5chamber system, and is in the form of a slide valve. Application The proportional directional control valve can be used to control the direction and speed of hydraulic cylinders and hydraulic motors and is employed in cases wherer a servo valve would be too expensive and a normal directional control valve would not offer a sufficient range of functions. The electrical control allows the wide variety of motions to be executed simply and extremely precisely by means of the continouslycontrollable signal. Using the pressure balance as intermediate component, the proportional directional control valve can taken over a flow control function. Mounting The units are screwed to subplates and sealed by means of Orings. Line connection Subplate, interface to DIN 2 30A 6 and ISO 0AB03A. Features Speed and direction control in accordance with setpoint specification Program control, remote control Springcentred robust design Inexpensive system solution With pressure balance, loadcompensated speed control. Type key Proportional directional control valve 2 Code No.: 20 See characteristic curve S 6 UP 0 G......... O... 205 See characteristic curve 206 See characteristic curve 2 3 0 See characteristic curve 05 See characteristic curve 06 See characteristic curve Symbol: 87 3 Engineering version: Sealing material: V FKM (e.g. Viton) 233 93 Subplate P S 6 G......... O O 2 3 22 Line connection: 200 G / (Internal thread 300 G 3/8 to DIN ISO 228/) 2 Code No.: 02 G / 00 G 3/8 3 Engineering version: 200 HERION Systemtechnik GmbH Untere Talstraße 65 D7263 Weil der StadtMerklingen Tel.: +9 (0) 70 33/30 80 Fax: +9 (0) 70 33/30 80 www.herionsystemtechnik.de info@herionsystemtechnik.de
Parameters Type designation S 6 UP... 0 G... S 6 UP... 0 G... General parameters Description Proportional directional control valve Symbol See type key Design Spooltype valve, pilot operated Type of mounting Flange Line connection Subplate Mounting position Valve axis horizontal (See installation drawings) Type of actuator Proportional solenoid Weight of valve with solenoid [kg].8 with 2 solenoids 2. Weight of pressure balance as intermediate component, [kg] :0 ports A, B, T Weight of pressure balance as intermediate component, [kg] 2.8 ports A and B Weight of subplate G / [kg] 0.7 G 3/8 [kg].0 Ambient temperature range ϑ u [ C] 20... +50 Size NG 6 Hydraulic parameters Operating pressure range at ports P, A p max [bar] up to 35 and B Operating pressure range at port T p max up to 60 Temperature of pressure fluid ϑ m max. [ C] +70 Viscosity range ν [mm 2 /s] 2... 500 Zero flow (Vp = 00 bar) [cm 3 /min] 20 Flow rate with pressure balance II and V Q min [cm 3 /min] 50 with pressure balance III und VI 00 drop with pressure balance II and V Vp [bar] 5 per control edge with pressure balance III and VI Vp [bar] 0 Repeatability with dither ) at Q min [%] 0 at I=500 ma [%] Hysteresis with pressure balance (with dither ) ) I N [%] 2 without pressure balance (with dither ) ) I N [%] 2 Sensitivity of response, with dither ) I N [%] 0. Width of backlash, with dither ) I N [%] 0. Floating time Q = 0%...00% [ms] 35 Q = 00%...0% [ms] 70 Filteration, absolute [μm] 25 Electrical parameters of proportional solenoid Solenoid Cat. No. 7297 7298 Rated current I N [ma] 800 600 Resistance R 20 [Ω] 2.3 5.7 Duty cycle ED [%] 00 00 Electrical connection Connector to DIN 3 650 A Degree of protection to DIN 0 050 IP 65 (with connector) Drive electrics DC 05 / DC 05LT pq, pq 2 see Page 6 see Page 6 ) Dither: Frequency 50 Hz, amplitude 20 ma ss 2 Subject to alteration 750055.06.02.06
Characteristic curves Directional Control Valve Code 05 and 205 Vp valve = 00 bar with pressure balance III and VI with pressure balance II and V Directional Control Valve Code 0, 20, 06 and 206 Power limits without pressure balance Code 05 and 206 Code 0, 20, 06 and 206 drop accross valve without pressure balance, fully open Directional Control Valve Code 0, 20, 06 and 206 balance II and V balance III and VI 750055.06.02.06 Subject to alteration 3
Ordering The units are designated by their type number. The composition of this number can be drawn from the type code. The standard versions are listed in the type survey. When ordering any of the standard versions, please state type number as well as catalog number to preclude possible misinterpretations. When inquiring about or ordering units not listed in our type survey of this publication, the type number made up by you by means of the type code, however, will do. The corresponding catalog number will then be stated in our confirmation of order. Orings are enclosed with flanged units. balance, subplate, drive electronics and mounting screws must be ordered separately. Example of order Proportional directional control valve, size 6, for flange mounting, Symbol 87, with Code 205, pressure balance, mating subplate G / and drive electronics. Proportional directional control valve: Type: S 6 UP 0 G 87 205 O V Cat. No.: 520807.7298 balance: Cat. No.: 60590 Subplate: Type: P S 6 G 2 02 2 O O Cat. No.: 06573 Mounting screws: ( pcs. required) Socket head screw (M 5 x 70 DIN 920.9) Cat. No.: 066235 Drive electronics to be ordered separately, see Page 6. Installation drawing Manual override Subject to alteration 750055.06.02.06
Equipment survey and possibilities of combination (standard designs) Designation Symbol SymbolNo. Type Cat. No. Combination 2) Proportional directional control valve 87 233 S 6 UP 0 G 87 20 O V S 6 UP 0 G 87 205 O V S 6 UP 0 G 233 20 O V S 6 UP 0 G 233 205 O V 520789.7298 520807.7298 5208.7298 52082.7298 93 S 6 UP 0 G 93 206 O V 520808.7298 22 S 6 UP 0 G 22 20 O V S 6 UP 0 G 22 205 O V 520809.7298 52080.7298 87 S 6 UP 0 G 87 0 O V S 6 UP 0 G 87 05 O V 520827.7297 520828.7297 233 S 6 UP 0 G 233 0 O V S 6 UP 0 G 233 05 O V 520829.7297 520830.7297 93 S 6 UP 0 G 93 06 O V 520833.7297 22 S 6 UP 0 G 22 0 O V S 6 UP 0 G 22 05 O V 52083.7297 520832.7297 balance II balance III balance port P 60589 60590 balance II balance port B C T (return) 07233 balance II balance III balance port AC B 07236 0723065 balance V balance VI balance port AC T; BC T (return) 605532 605533 Subplates G / G 3/8 P S 6 G 2 02 2 O O P S 6 G 3 00 2 O O 06573 06583 Mounting Socket head screws (M 5 x 30 DIN 920.9) screws 3) Socket head screws (M 5 x 70 DIN 920.9) Socket head screws (M 5 x 0 DIN 920.9) 0700387 066235 06666 ) Port designation at symbol: Index G = valve side, Index P = plate side 2) Possibilities of combination between proportional directional control valve, pressure balance, subplate and mounting screws. 3) Tightening torque = 7.6 Nm ) See 2way proportional flow control valves, Publication 7502022 750055.06.02.06 Subject to alteration 5
Drive electronics Drive electronics DC 05 / DC 05LT Digital amplifier with constant current regulator PWM Power supply: 8... 30 VDC, incl. residual ripple Ambient temperature ϑu: 0... +50 C Weight: 0, kg Mounting position: Upright Free air circulation must be ensured Space requirement for installation of 9" card rack: 50 mm European format: 00 x 60 mm Type Setpoint input (switchable) Internal setpoints Pcs. Ramps Pcs. For proportional directional control valves Rated current IN : 0... 600 ma DC 05 [V] [ma] 2x0...±0V 0()...20 ma Terminal strip Form F DIN 62 Number of pins 8 PID controller for external control loops / Cat. No. 550000 ) For Further information, see script 7503503 (switchable) DC 05LT 0...±0V 2 8 55000 ) 750350 Functional compatible to pq 03 ) Preparametrred electronics on request. Drive electronics pq Plugin amplifier with constant current regulator PWM Degree of protection: IP 65 Power supply: 8... 32 VDC, Residual ripple: 0 % Ambient temperature ϑu: 20...+50 C Mounting position: Optional Setpoint input (switchable) [V] [ma] Type of connection Connecting cable, 2 m Connector acc. to DIN 365 Weight For proportional valves with 2 solenoids 2 pq necessary Rated current IN: 0... 200 ma, allowed resistance of solenoid R20: 2,5...,5 Ω [kg] Cat. No. For Further information, see script HERION 750296 0... 0 0... 0 0 ()...20 0 ()...20 0,8 0,8 5980085 598008 ) Mark in table: without, with ) Cable connector to be ordered separately. Cat. No. 0660689 Drive electronics pq 2 Amplifier module with constant current regulator PWM Degree of protection: IP 65 Power supply: 8... 32 VDC, Residual ripple: 0 % Ambient temperature ϑu: 20...+50 C Mounting position: Optional For attachment on mounting rail acc. to EN 50022 Setpoint input (switchable) [V] [ma] Output currents Cat. No. For Further information, see [ma] script For proportional valves with 2 solenoids 2 pq necessary 0... 0 0 ()...20 0... 600 / 200 598026 HERION 750309 6 Subject to alteration 750055.06.02.06
Dimensional drawings [mm] Proportional directional control valve S 6 UP 0 G 87... O V S 6 UP 0 G 233... O V S 6 UP 0 G 22... O V S 6 UP 0 G 93... O V Proportional directional control valve with pressure balance in port P to B C T S 6 UP 0 G 87... O V S 6 UP 0 G 233... O V S 6 UP 0 G 22... O V 750055.06.02.06 Subject to alteration 7
Proportional directional control valve pressure balance in port A C T to B C T (return flow) S 6 UP 0 G 22... O V 80 Proportional directional control valve in port A C B S 6 UP 0 G 93... O V 8 Subject to alteration 750055.06.02.06
Dimensional drawings [mm] Subplate with interface to DIN 2 30A6 and ISO 0AB03A G / G 3/8 750055.06.02.06 Subject to alteration 9
Spare parts drawings Proportional directional control valve S 6 UP 0 G 87... O V S 6 UP 0 G 233... O V With pressure balance in port P Proportional directional control valve S 6 UP 0 G 22... O V With pressure balance in port A C T or B C T (return flow) Spare parts (number of pieces) for proportional directional control valve Part Description S 6 UP 0 G 87... O V S 6 UP 0 G 233... OV S 6 UP 0 G 22... O V S 6 UP 0 G 22... O V Cat. No. 2 3 Oring (9.2 x.8) Connector Connector With pressure balance in port P With pressure balance in port B C T With pressure balance in port A C T; B C T 070728 0657859 0570275 for pressure balance balance II balance III balance II balance V balance VI Oring (9.2 x.8) 60589 60590 07233 605532 605533 070728 0 Subject to alteration 750055.06.02.06
Spare parts (number of pieces) for proportional directional control valve Part 2 Description Oring (9.2 x.8) Connector for pressure balance S 6 UP 0 G 93... O V With plate type pressure balance in port A Cat. No. 070728 0657859 Part Description balance II balance III Cat. No. 3 balance II balance III Oring (9.2 x.8) 2 2 07236 0723065 070728 750055.06.02.06 Subject to alteration