300W C-Band Second Generation 3RU SSPA Chassis with 1RU N+1 Power Supply Teledyne Paradise Datacom s Indoor 3RU Solid State Power Amplifiers represent the latest in High Power Microwave Amplifier Technology. The SSPA chassis achieves the highest power density in the industry along with enhanced maintainability. The power supply, fan trays and controller card connector plate are all removable for easy maintenance. At 25.25 deep, and only 3RU high, this chassis is perfect for SNG applications, or other configurations where rack space is at a premium. The SSPA front panel features an easy-to-navigate display and menu structure. Dedicated LEDs are provided for alarm condition indication. Teledyne Paradise Datacom rack mount power amplifiers have a wide range of monitor and control functionality, including: RS-232/RS-485 (4-wire) serial communication Ethernet port supporting UDP, SNMP and web browser-based control Form C contacts for output monitor ports and optoisolated input ports Free Windows M&C software Variety of third party M&C drivers available FEATURES Extremely High Power Density: to 300 W X-Band to 200 W C-Band to 125 W Ku-Band 1RU N+1 Power Supply Removable Fan Tray and M&C Card Assembly Remote Communication via RS232/485 or Ethernet RF Output Sample Port 20 RF Gain Adjustment True RF Output Power Measurement Built-in Maintenance Switch Controller OPTIONS Removable RF Module L-Band Input operation Reflected Power Monitor Input Sample Port Exhaust Duct Adapters Remote Control Panel System Configurations Teledyne Paradise Datacom LLC Teledyne Paradise Datacom Ltd. 328 Innovation Blvd., Suite 100 2&3 The Matchyns, London Road, Rivenhall End State College, PA 16803 USA Witham, Essex CM8 3HA United Kingdom Tel: (814) 238-3450 Tel: +44(0) 1376 515636 Fax: (814) 238-3829 www.paradisedata.com Fax: +44(0) 1376 533764 PAGE 1 OF 9 214576 REV C ECO 18515
Frequency Range Indoor Rack Mount Specifications, C-Band SSPAs Output Power Typical, P sat Guaranteed minimum, P 1 Power Requirements Line Frequency Line Power (Voltage) (typical @ 220 VAC) Frequency selection L Frequency selection H Frequency selection C 1 Frequency selection A Frequency selection B 1 Frequency selection D HPAC3050ARXXXXP2 HPAC3075ARXXXXP2 HPAC3100ARXXXXP2 HPAC3140ARXXXXP2 HPAC3200ARXXXXP2 HPAC3250ARXXXXP2 HPAC3300ARXXXXP2 power factor HPAC3050ARXXXXP2 HPAC3075ARXXXXP2 HPAC3100ARXXXXP2 HPAC3140ARXXXXP2 HPAC3200ARXXXXP2 HPAC3250ARXXXXP2 HPAC3300ARXXXXP2 4.400 to 5.000 5.715 to 5.790 5.750 to 6.670 5.850 to 6.425 5.850 to 6.725 6.425 to 7.025 P sat / P 1 47.0 (50) / 46.8 (48) 48.8 (76) / 48.5 (70) 50.0 (100) / 49.5 (89) 51.5 (150) / 51.0 (125) 53.0 (200) / 52.3 (170) 54.0 (250) / 53.0 (200) 54.7 (300) / 54.0 (250).98 47 to 63 P sat 400 (90 to 265) 450 (90 to 265) 650 (90 to 265) 850 (90 to 265) 1000 (90 to 265) 1300 (180 to 265) 2 1700 (180 to 265) 2 Hz Receive Band Noise Power Density without filter -155 W / 4 khz Note 1: Output power decreases over the extended portion of the frequency range. Both P sat and P 1 de-rate by 1 from 5.85 to 5.75 and from 6.425 to 6.725. Note 2: For 90 to 180 VAC operation, consult factory. Specifications, X-Band SSPAs Frequency Range Output Power Typical, P sat Guaranteed minimum, P 1 Power Requirements Line Frequency Line Power (Voltage) (typical @ 220 VAC) Receive Band Noise Power Density Frequency selection F Frequency selection D 1 Frequency selection A HPAX3060ARXXXXP2 HPAX3075ARXXXXP2 HPAX3100ARXXXXP2 HPAX3140ARXXXXP2 HPAX3200ARXXXXP2 power factor Line frequency HPAX3060ARXXXXP2 HPAX3075ARXXXXP2 HPAX3100ARXXXXP2 HPAX3140ARXXXXP2 HPAX3200ARXXXXP2 without optional filter with optional filter 7.10 to 7.40 7.70 to 8.40 7.90 to 8.40 P sat / P 1 47.5 (60) / 47.3 (54) 48.8 (76) / 48.3 (68) 50.0 (100) / 49.5 (89) 51.4 (140) / 50.8 (120) 53.0 (200) / 51.8 (151).98 47 to 63 P sat 650 (90 to 265) 700 (90 to 265) 750 (90 to 265) 1225 (90 to 265) 1370 (180 to 265) 2-85 -155 Hz W / 4 khz W / 4 khz Note 1: Output power decreases over the extended portion of the frequency range. Both P sat and P 1 de-rate by 1 linearly from 7.90 to 7.70. Note 2: For 90 to 180 VAC operation, consult factory. PAGE 2 OF 9 214576 REV C ECO 18515
Specifications, Ku-Band SSPAs Frequency Range Output Power Typical, P sat Guaranteed minimum, P 1 Power Requirements Line Frequency Line Power (Voltage) (typical @ 220 VAC) Frequency selection F Frequency selection B 1 Frequency selection A Frequency selection C Frequency selection D HPAK3025ARXXXXP2 HPAK3035ARXXXXP2 HPAK3040ARXXXXP2 HPAK3050ARXXXXP2 HPAK3070ARXXXXP2 HPAK3100ARXXXXP2 HPAK3125ARXXXXP2 power factor Line frequency HPAK3025ARXXXXP2 HPAK3035ARXXXXP2 HPAK3040ARXXXXP2 HPAK3050ARXXXXP2 HPAK3070ARXXXXP2 HPAK3100ARXXXXP2 HPAK3125ARXXXXP2 12.75 to 13.25 13.75 to 14.50 14.00 to 14.50 14.50 to 14.70 15.10 to 15.40 P sat / P 1 44.0 (25) / 43.0 (20) 45.5 (35) / 44.5 (28) 46.0 (40) / 45.0 (31) 47.0 (50) / 46.0 (40) 48.5 (70) / 47.5 (56) 50.0 (100) / 49.0 (80) 51.0 (125) / 50.0 (100).98 47 to 63 P sat 320 (90 to 265) 350 (90 to 265) 500 (90 to 265) 500 (90 to 265) 650 (90 to 265) 1100 (90 to 265) 1200 (90 to 265) Hz Receive Band Noise Power Density 2-155 W / 4 khz Note 1: Output power decreases over the extended portion of the frequency range. Both P sat and P 1 de-rate by 1 linearly from 14.00 to 13.75. Note 2: All Ku-Band SSPAs are fitted with a receive band reject bulkhead filter, standard. An optional pressure window is available. PAGE 3 OF 9 214576 REV C ECO 18515
Gain Gain Flatness Indoor Rack Mount Common Electrical Specifications Gain Slope Gain Variation vs. Temperature Gain Stability Gain Adjustment Intermodulation Distortion (Two-tone, 5 MHz spacing) AM/PM Conversion Spurious Harmonics (SSPA only) Input/Output VSWR range full band full band (Extended C-Band) per 40 MHz 0 C to +50 C at constant temperature 0.1 resolution 55-75 ± 1.0 ± 1.5 ± 0.3 ± 1.0 ± 0.25 20 /40 MHz /24 hours 3 back off relative to P 1-25 c @ rated P 1 @ rated P 1-3 @ rated P 1 @ rated P 1-3 Extended C-Band Output VSWR: Ku-Band with bulkhead filter 3.5 1.0-65 -50 1.30:1 1.50:1 1.40:1 Noise Figure at maximum gain 12 Group Delay (per 40 MHz segment) Transmit Band Noise Output Power Density Residual AM Noise, typical Residual Phase Noise, typical (SSPA only) True RF Power Detector Linear Parabolic Ripple 0.01 0.003 1.0 o / o / c c ns/mhz ns/mhz 2 ns p-p TX Band -75 W/4 KHz Offset frequency from carrier 1 Hz 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz Offset frequency from carrier 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz Range Accuracy -110-120 -130-135 -140-140 -140-90 -100-110 -120-125 -130 P sat to (P sat - 20) ± 0.5 m 1RU N+1 Redundant Power Supply The combination of a separate, fully redundant power supply is an excellent means of obtaining the ultimate in system reliability. The power supply is an N+1 redundant configuration, meaning that there is one more power supply module available than required to operate the SSPA. A failure of one power supply module will not take the amplifier off the air. PAGE 4 OF 9 214576 REV C ECO 18515
Electrical Specifications for 3RU RM GaN SSPA with zbuc converter Gain Gain Flatness Gain Slope Gain Adjusted Range Gain Stability Phase Noise Spurious Nominal setting full band (C-,X-,Ku-bands) per 40 MHz (C-,X-,Ku-bands) Range Typical C-Band Adj. Range Typical Ku-Band Adj. Range 0 to +50 C Offset frequency from carrier 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz L-Band Operation Teledyne Paradise Datacom amplifiers are available with an integrated L-Band Block Up Converter. L-Band units utilize Teledyne Paradise Datacom s proprietary zbuc technology. The addition of a zbuc converter to the SSPA typically increases the gain by 2-4. The advantages of zbuc technology include: zbuc converter can detect and switch to an extenally supplied reference. Optional internal high stability (10MHz) reference. zbuc converter can lock to an externally supplied reference of 5, 10, 20, 25, or 50 MHz without modification. zbuc converter can accept a wide range of external reference power (-10 to +5 m). Available Frequency Plans Band Model Number* IF Input LO Frequency RF Output C Sub-Band A 950-1525 MHz 4.900 5.850-6.425 C Sub-Band B 950-1825 MHz 4.900 5.850-6.725 C Sub-Band C 950-1870 MHz 4.800 5.750-6.670 C Sub-Band E 950-1250 MHz 5.475 6.425-6.725 C Sub-Band F 950-1250 MHz 5.775 6.725-7.025 C Sub-Band G 950-1675 MHz 4.800 5.750-6.475 X Sub-Band A 950-1450 MHz 6.950 7.900-8.400 Ku Sub-Band A 950-1450 MHz 13.050 14.00-14.50 Ku Sub-Band B 950-1700 MHz 12.800 13.75-14.50 Absolute max. -30-60 -70-80 -90-90 In-Band Signal Related (C-/Ku-Band) (Extended C-Band) Close to Carrier Spurious ( 20 MHz) Local Oscillator C-band (typ.) -60-74 -84-100 -105-125 75 ± 2.0 ± 0.5 20 60-80 57-77 ± 1.5 X-band (typ.) -58-70 -80-94 -97-122 Ku-band (typ.) -56-67 -78-91 -94-120 /40 MHz c c c m Noise Figure At Maximum gain 20 Transmit Band Noise Output Power Density Tx Band at Maximum gain -65 W/4kHz Input VSWR L-Band 1.5 : 1 Internal Reference Option Reference Accuracy (initial) Aging per day (after 30 days) ± 1 10-8 ± 1 10-9 Aging per year (after 30 days) ± 6 10-8 Reference Stability over Temperature (-40 to +40 C, ambient) ± 1 10-8 PAGE 5 OF 9 214576 REV C ECO 18515-50 -40-50 -30
Outline Drawing, typical, 2nd Generation 3RU Ku-Band SSPA with N+1 Redundant Power Supply PAGE 6 OF 9 214576 REV C ECO 18515
Mechanical Specifications Size (SSPA) width X height X depth 19.0 x 5.22 x 24.13 483 x 133 x 613 Size (Power Supply) width X height X depth 19.0 x 1.75 x 15.97 483 x 45 x 406 Weight (SSPA) Typical (± 3%) With integrated zbuc converter 75 (34) +1.7 (+0.8) inches mm inches mm lbs. (kg) lbs. (kg) Weight (Power Supply) with four (4) power supply modules 29 (13.2) lbs.(kg) Finish Paint Gray; powder coat Connectors RF Input RF Output (C-Band) RF Output (X-Band) RF Output (Ku-Band) RF Output Sample Type N WR137 Waveguide WR112 Waveguide WR75 Waveguide Type N Female CPR137G Flange (PDR-70) CPR112G Flange (PDR-84) Grooved flange (PBR-120) Female Environmental Specifications Operating Temperature Storage Temperature Ambient 0 to +50-20 to +75 Operating Relative Humidity Non-condensing 95 % Cooling System Forced Convection Air Cooling Front Panel - Intake Rear Panel - Exhaust Audible Noise Measured 1m from unit, at P sat 71 A Altitude No temperature de-rating up to 10,000 ft, (3000 m) De-rate maximum temperature by 2 C per 1,000 ft (300 m) beyond 10,000 ft. C C Receive Band Filter Options S-Band A 1.75 B 0.81 1.38 0.69 2.020-2.120 (Band A) : Filter L205250-S3-TX Dimensions: A=9.972, B=8.500 2.200-2.300 (Band B) : Filter L205250-S4-TX Dimensions: A=12.222, B=10.750 1.750-2.120 (Band G) : Filter L205250-S11-TX Dimensions: A=4.730, B=3.250 X-Band 2.42 0.79 8.26 1.96 0.98 1.28 9.83 PAGE 7 OF 9 214576 REV C ECO 18515
Redundant and Phase Combined Systems Teledyne Paradise Datacom s 3RU Rack Mount SSPAs can be configured in a variety of redundant and phase combined configurations. 1:1 Redundant System with Internal Redundancy Control 1:1 Redundant System with RCP2-1100 Redundant System Controller 1:1 Fixed Phase Combined System with FPRC-1100 Phase Combined System Controller 1:2 Redundant System with Internal Redundancy Control 1:2 Redundant System with RCP2-1200 Redundant System Controller 1:2 Fixed Phase Combined System with FPRC-1200 Phase Combined System Controller System Output Power Capacity Due to residual losses inherent in redundant system configurations (waveguide bends; switch and coupler losses), reduce the typical output power specification of a single amplifier by approximately 0.2 for 1:1 and by 0.4 for 1:2 systems. In phase combined systems, these same losses result in slightly less than the ideal addition of 3 to the output power of a single HPA unit. For 1:1 phase combined systems, the typical additive output power is approximately 2.70 above the output power of a single HPA. For 1:2 phase combined systems, the typical additive output power is approximately 2.50 above the output power of a single HPA. Actual system losses will vary based on the system options. System Controllers The RCP2/FPRC-1100/1200 system controller provides an extremely user friendly interface for complete monitor and control of the amplifier system. RCP2-1100 Redundant System Controller The front panel mimic display shows the on-line amplifiers and the switch positions. Fault lights are provided for easy identification of system status. All system monitor and control is available locally at the front panel LCD display, as well as remotely by the RS232, RS485, or Ethernet interface ports. Audible alarms and a full compliment of parallel I/O signal are available at the rear panel of the controller. PAGE 8 OF 9 214576 REV C ECO 18515
Part Number Configuration Matrix MODEL: HPA C 3 3 0 0 A R M X X X P 2 Band C-Band X-Band C X Ku-Band K C-Band Rack Height 3RU 3 Power Level (Watts) 050, 075, 100, 140, 200, 250, 300 X-Band 060, 075, 100, 140, 200 Ku-Band A 1 B 1 C 1 E 1 F 1 G 1 A 1 B C D F A 1 B 1 025, 035, 040, 050, 070, 100, 125 Frequency Sub Band C-Band 5.850 to 6.425 5.850 to 6.725 5.750 to 6.670 6.425 to 6.725 (Palapa) 6.725 to 7.025 (Insat) 5.750 to 6.475 X-Band 7.90 to 8.40 7.50 to 8.50 9.50 to 10.50 7.70 to 8.40 7.10 to 7.40 Ku-Band 14.00 to 14.50 13.75 to 14.50 1 Available with optional BUC Standalone Unit R Standalone amplifier Block Up Converter M Internal Reference P External Reference X No BUC Generation 2 2nd Generation Configuration Modifier 3 P Standard (External N+1 Power Supply) L External N+1 Power Supply + Rear Exhaust Adapters Configuration Modifier 2 X Standard P Front Panel Power Switch R 1 Rx Band Reject Filter V Reflected Power Monitor A 1 P + R (see above) B P + V (see above) C 1 V + R (see above) P + R + V (see above) D 1 1 X-Band units only Configuration Modifier 1 X Standard K 110 VAC Input S Input Sample Port C K + S (see above) System Configuration X Standalone amplifier See the following datasheets for system options: Indoor Rack Mount Redundant SSPA Systems (203583) Indoor Rack Mount Phase Combined SSPA Systems (203584) Use and Disclosure of Data The items described herein are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations. Proprietary and Confidential The information contained in this document is the sole property of Teledyne Paradise Datacom. Any reproduction in part or as a whole without the written permission of Teledyne Paradise Datacom is prohibited. Specifications are subject to change without notice. PAGE 9 OF 9 214576 REV C ECO 18515