GAI-TRONICS A Hubbell Company Call/Talk GAI-Tronics Call/Talk communication systems provide paging and party-line capabilities in a durable, easy-to-operate package. Plant personnel use the paging capability to locate individuals throughout the facility, Further communication then occurs over the party line, allowing two or more people to converse without being heard over the speakers. GAI-Tronics offers two variations of Call/Talk: Single-Party (one party line), or Multi-Party (five party lines for up to five simultaneous two-way conversations). The GAI-Tronics Call/Talk System is a distributed amplifier system. Each indoor, outdoor, or hazardous area wall station contains a speaker amplifier for driving speakers. GAI-Tronics Call/Talk System is completely modular: every station consists of an enclosure, a cover plate, a power supply, and a speaker amplifier module. In addition, Desktop, Desk-Edge, and Flush-Mount stations include a separate subset equipped with a cable to plug into the remote enclosure. All Call/Talk station amplifiers are electrically paralleled; systems may be expanded by extending cable from the nearest amplifier or junction box. A single resistance load is required for each page and party line circuit to establish line impedance and minimize effects of stray induced hum or noise signals. For ease of load adjustment, a GTC line balance assembly should be placed near the electrical center of the system, and near an indoor handset station in a quiet area.
HAZARDOUS AREA DIVISION 2 STATIONS All Hazardous Area Division 2 Stations are available in indoor and outdoor design. Indoor Stations are rated NEMA 12; weatherproof stations are housed in a durable fiberglass enclosure, rated NEMA 4. The enclosure is equipped with a highly-durable velcro closure. This feature ensures that the station inside is protected from harsh environments. For areas not requiring a handset station, we offer a speaker amplifier station capable of powering remote speakers. B01B & B04 Cover Plates MOD5410 Outdoor Multi-Party Handset/Speaker Station Consists of * Part Number Description Enclosure Cover Plate Power Supply Speaker Amplifier MOD5300A Indoor Single-Party Handset/Speaker Station A01B B01B C01B D01B MOD5400A Indoor Multi-Party Handset/Speaker Station A01B B02B C01B D01B MOD5500A Outdoor Speaker/Amplifier Station A01B B04 C01B D01B MOD5310 Outdoor Single-Party Handset/Speaker Station A02B&F01 B01B C01B D01B MOD5410 Outdoor Multi-Party Handset/Speaker Station A02B&F01 B02B C01B D01B All models listed above are FM Approved as Non-incendive for Class I, Div. 2, Groups A,B,C,D; Suitable for Class II, Division 2, Group G. * Components are packaged separately for shipment. Available with 220VAC power supply. See Ordering Information.
Call/Talk SPECIFICATIONS AND ORDERING INFORMATION Cover Assembly (B01B, B02B, B04, B07A, B08A, B09A, B13) Handset Amplifier Circuit and Handset Assembly (B01B, B02B, B07A, B08A) Output Level.......................................................... 1.5 Vrms nominal into 33 ohm load Output Limiter...................................................................... 1.5 Vrms nominal Frequency Response............................................................. 300-6500 Hz. +/- 1.5dB Distortion....................................................... 1.5% max. THD @ 1kHz at 1.25V output Controls................................................. Transmitter level, receiver volume, handset pressbar Microphone.................................................................. Noise-cancelling dynamic Receiver.................................................. High efficiency dynamic; Hearing aid compatible Cable.................................................................... Retractile, 7 ft. extended PVC External Controls..... B02B, B08A............................... Party Line Selector Switch: 5 switch positions Dimensions......... B01B, B02B........... 7.75(196.9)W x 8.25(209.6)H x 9.75(95.3)D with handset; inches (mm)................... B04, B13.............................................. 7.75(196.9)W x 8.25(209.6)H................... B07A, B08A....................... 7.75(196.9)W x 9.75(247.7)H x 4(101.6)D with handset................... B09A................................................. 7.75(196.9)W x 9.75(247.7)H Material/Finish...... B01B, B02B, B04, B13....................... 16-gauge cold-rolled steel/light gray enamel................... B07A, B08A, B09A............................................. Sand cast aluminum Shipping Weight..... B01B, B02B....................................................... 4 lbs. (1.8 kg)................... B04, B13.......................................................... 2 lbs. (0.9kg)................... B07A, B08A...................................................... 9 lbs. (4.09 kg)................... B09A............................................................. 6 lbs. (2.7 kg) Speaker Amplifier Circuit (D01B) Output.............................................................. 12 watts min. into 8 or 16-ohm load Amplifier Sensitivity............................................................. 0.5VAC, at rated output Frequency Response..................................................................... 250-6500Hz. Distortion.............................................................. Less than 1% THD at 12W, 1kHz Input Impedance.................................................................. 25,000 ohms (NOM) Controls............................................... Speaker volume (adjustable by removing cover plate) Dimensions............................................ 3.75(95.3)W x 2.69(68.3)H x 2.06(52.3)D inches(mm) Shipping Weight........................................................................ 1 lb. (2.2 kg) Power Supply (C01B, C03) Voltage............ C01B...................................................... 105-130VAC, 50/60Hz................... C03........................................................... 220VAC, 50/60Hz Power Consumed: Zero/Max signal................................................... 3W, 4VA/30W, 35VA Dimensions......................................... 3.75 (95.3)W x 2.69 (68.3)H x 2.75(69.85)D; inches (mm) Shipping Weight........................................................................ 2 lb. (1.1 kg) Enclosures (A01B, A02B, F01, F02, A08B, A09) Material/Finish................... A01B, A02B, A08B........................... 16-gauge cold-rolled steel/light gray enamel............................................................. (A01B, A02B, NEMA 12)(A08B NEMA 1A)................... F01, F02...................................... Weatherproof gray fiberglass (NEMA 4)................... A09......................................................... Sand cast aluminum Mounting........... A01B, A02B, A08B.................................. Four (4) 0.38 dia, mounting holes................... F01, F02..................... Four (4) 0.38 dia. mounting holes; 4 bolts for indoor backbox................... A09..................................... Four (4) mounting feet at corners of enclosure Connections......... A01B, A02B, A08A.................. Dual bottom hubs, 1.25(31.8) and 1(25.4); inches(mm)..................................................... internal screw-type (single row) barrier terminal blocks................... F01, F02.................. Bottom 2 (50.8) and 1.5 (38.1); inches(mm) conduit and openings;..................................................... internal screw-type (single-row) barrier terminal blocks................... A09................... Bottom 1.25 (31.8) and.75 (19.1); inches(mm) conduit and openings;..................................................... internal screw-type (single row) barrier terminal blocks Temperature Range.................................................................... -30 C to +70 C Shipping Weight...... A01B, A02B, A08B.................................................. 6 lb. (2.7 kg)................... F01.............................................................. 16 lb. (7.2 kg)................... F02.............................................................. 12 lb. (5.4 kg)................... A09.............................................................. 19 lb. (8.6 kg) Dimensions......... A01B, A02B, A08B................. 8.75(222.3)H x 7.5(190.9)W x 3.5(88.9)D; inches (mm)................... F01, F02......................... 14.88(378)H x 7.4(190.5)W x 8.88(225.6)D; inches (mm)................... A09............................. 14.88(378)H x 10.25(260.4)W x 9(228.6)D; inches (mm)
SPECIFICATIONS AND ORDERING INFORMATION Subsets (E01, E02, E03, E04, E05A, E06A) Call/Talk Handset Amplifier Circuit and Handset Assembly................................... See Cover Assembly Section Construction......... E01, E02, E03, E04.......................... 16 - gauge cold-rolled steel/light gray enamel Mounting........... E01, E02:................... Two 0.3 (7.62mm) mounting holes; can be mounted right ot left Mounting........... E03, E04........................ Panel cut out: 2.75(69.85)H x 5.85(148.59)W; inches (mm) Dimensions.......... E01, E02....................................... 5(127)H x 4.5(114.3)W x 4.5(114.3)D;................................................. 10(254)H x 4.5(114.3)W x 5.75(146)D overall; inches (mm)................... E03, E04:........................... Panel: 3.7(94)H x 6.75(171.5)W; Overall: 9.25(235H;................................................................... Behind Panel: 2(50.8)D; inches (mm)................... E05A, E06A.................................... 8(203.2)W x 8.25(209.6)L x 4(101.6)H Connections......... All Models............ All connections to subset are made through a 9 ft. multi-conductor cable.............................. terminated by a 15-pin connector that plugs into the bottom of the amplifier enclosure External Adjustments:.. E05A, E06A............................................. Speaker Volume Adjustment Shipping Weight...... E01, E02........................................................... 5 lb. (2.3 kg)................... E03, E04........................................................... 4 lb. (1.8 kg)................... E05A, E06A......................................................... 6 lb. (2.7 kg) Speaker Amplifier..... E05A, E06A................... Output................................................... 5W to 8 ohm speaker load................... Gain.............................................................. 0.5V for 0.5W................... Frequency Response................................................... 250-6500 Hz................... Distortion................................................... 4% max THD @ 0.5W................... Input Impedance.................................................. 10K ohms (MIN) External Controls..... E04, E02, E06A............................. Party Line Selector Switch 5 switch positions Order Number Description -15 / -25 15-foot / 25-foot Thermoplastic Elastomer Handset Cord -TR Tropicalization (conformal coating) of PC Boards -TG Special Tagging -EXT Extended Subset Cable Cable (max. length 200 ft.) -220 220VAC Power Supply Option Accessories 305-001 Line Balance Unit (one required per system) Note: To order options listed above, add the Order Number to the end of the appropriate station number. For information about CAble used in Call/Talk system, please reference GAI-Tronics Cable Selection Guide. For information about junction boxes and options listed above, please reference GAI-Tronics Accessories Guide.
HAZARDOUS AREA DIVISION 1 STATIONS Call/Talk Hazardous Area Division 1 stations are available in indoor and outdoor design and are completely modular. All electronics are contained in a single enclosure for easy installation and simple operation. The enclosures are constructed so that if an explosion occurs within the enclosure, the flame will be cooled before exit, prevented ignition of the surrounding atmosphere. In addition to the enclosures, the handsets are also intrinsically-safe for us in hazardous, Division 1 areas. B07A & B09A Cover Plates MOD5411A Outdoor Multi-Party Handset/Speaker Station Consists of * Part Number Description Enclosure Cover Plate Power Supply Speaker Amplifier 5301A Indoor Single-Party Handset/Speaker Station A09 B07A C01B D01B 5401A Indoor Multi-Party Handset/Speaker Station A09 B08A C01B D01B 5501 Outdoor Speaker/Amplifier A09 B09A C01B D01B MOD5311A Outdoor Single-Party Handset/Speaker Station A09&F02 B07A C01B D01B MOD5411A Outdoor Multi-Party Handset/Speaker Station A09&F02 B08A C01B D01B MOD5511A Outdoor Speaker Amplifier A09&F02 B09A C01B D01B Stations listed above are FM Approved as Suitable for Class I, Div. 1, Groups B,C,D; Dust ignition proof for Class II, III, Div. 1, Group E,F,G, and meet requirements for mobile offshore drilling units as specified in Title 46, Part III of the Code of Federal Regulations. * Components are packaged separately for shipment. Available with 220VAC power supply. See Ordering Information.
DESKTOP, DESK-EDGE, AND FLUSH-MOUNT STATIONS Call/Talk stations are available in desktop, flush-mount and desk-edge configurations. With these models, the subset is placed in a convenient location and is connected to the enclosure assembly via a 9-foot cord. The enclosure can be mounted under a desk, or in the ceiling. From left to right: E06A, E02, E04 Multi-Party Subsets From left to right: C01B, A08B, D01B, B13 Consists of * Part Number Description Subset Enclosure Cover Plate Power Supply Speaker Amplifier MOD5320A Desktop Single-Party Station E05A A08B B13 C01B * MOD5420A Desktop Multi-Party Station E06A A08B B13 C01B * MOD5340 Desk-Edge Single-Party Station E01 A08B B13 C01B D01B MOD5440 Desk-Edge Multi-Party Station E02 A08B B13 C01B D01B MOD5350 Flush-Mount Single-Party Station E03 A08B B13 C01B D01B MOD5450 Flush-Mount Multi-Party Station E04 A08B B13 C01B D01B The stations listed above are FM Approved as Non-incendive for Class I, Div. 2, Groups A,B,C,D areas. *D01B module can be used with Desktop Station to power additional speakers. D01B is not included with these stations. ** Components are packaged separately for shipment. Available with 220VAC power supply. See Ordering Information. GAI-Tronics - USA Toll Free: 1 (800) 492-1212 Tel: (610) 777-1374 Fax: (610) 796-5954 www.gai-tronics.com GAI-Tronics Limited, UK Tel: +44 (0)1283 500500 Fax: +44 (0)1283 500400 www.gai-tronics.co.uk GAI-Tronics S.r.l, Italy Tel: +39 02 48601 460 Fax: +39 02 4585 625 www.gai-tronics.it GAI-Tronics - Malaysia Tel: +60-3-8945-4035 / 8945-7348 Fax: +60-3-8945-4675 Quality Management Systems Certified - ISO9001:2000 The policy of GAI-Tronics is one of continuous improvement, therefore the company reserves the right to change specifications without notice Pub F930801 7/98