CANADA S CUTTING EDGE ADVANCED CONTROL SYSTEMS CORP. Paisley Lane, Stouffville, Ontario L4A 7X4 Tel: 905-64-056 Fax: -866-45-574 www.acspowersports.ca
90 CARBIDES ACS LIGHTI ACS SPORTI ACS MAXI Less steering pressure Entry level carbide Safer casual riding Works with minimal studding (50-75) 5 6 bolts on host bar of 6 cutting carbide edge in centre wear pad at each end Works well with minimal studding (50-98) 5 6 bolts on host bar 9 of 6 90 cutting carbide edge, 5 in centre at each end Everyday rider ideal for trails Works with average studding (96-44) 8 bolts on host bar 7 of 6 cutting carbide 4 in centre at each end ACS PROI ACS TWIN 4 I ACS GRIPPER SKII Perfect for high hp sleds Long lasting Works with aggressive studding (44-40) 8 bolts on host bar 0 of 6 cutting carbide egde, 7 in centre at each end Reduces darting as it makes its own groove Provides truer tracking on rutted trails Two 7 6 steel bars welded onto a steel flat plate 4 Twin Runner 4 of 8 90 carbide on each host bar Designed for the Polaris Gripper Ski 5 6 bolts on 8 square host bar Comes in 4, 6, and 8 of 8 cutting carbide edge POWER SPORTS PARTS 60 CARBIDES ACS CHAMPI Aggressive rider & cross country racer Works with aggressive studding (44+) 8 bolts on host bar 5 of 60 cutting carbide edge 4 wear pad ACS FORMULAI Ultimate cutting carbide Super aggressive Works with aggressive studding (44+) 8 bolts on host bar 7 of 60 cutting carbide edge 4 wear pad ACS USII Designed for use on USI skis 8 bolts on host bar Available in 7, 9, of 8 cutting carbide edge wear pad ACS TWIN 6 & 8 I Reduces darting as it makes its own groove Provides truer tracking on rutted trails Two 7 6 steel bars welded onto a steel flat plate 6 Twin Runner 6 of 6 60 carbide on each host bar 8 Twin Runner 8 of 6 60 carbide on each host bar All runners supplied with Nyloc nuts & washers. Runners can be used with ski skins or plastic skis.
BULLDOG CLUTCH PULLER ACS pullers are made from a high grade alloy steel which resists stress, the same material that is used for drill collars, trailer axles and hydraulic machinery shafts. Our pullers are heat treated to increase durability and strength. NOTE: Apply a small amount of grease when using the puller. ACS-0 /4 x 6 NF Polaris 500/600 XC/RMK 700/800 XCR/RMK ACS- /4 x 6 NF Polaris Sport Touring, 440XCR, all 550 98-00, 440 98-99 ACS-05 4 x mm Skidoo, All Formula 88-95, Formula III 95-96, Safari 90-95 and all 58 motors ACS-5 /4 x 6 NF OEM Polaris Indy 98 Newer ACS-6 4 x.5mm Arctic Cat 000cc 007 Newer (4 Tower Clutch) ACS-7 /4 x 6 NF Polaris ATV 985 Newer All primary clutches ACS-8 4 x.5mm Arctic Cat 650/V 4x4 004-006 Kawasaki Prairie 700 KFX All Kawasaki 700 V-Force All Kawasaki Brute Force 650/750 All Kawasaki Mule 000 Series All Suzuki 700 Twin Peaks 4x4 004-007 Please visit www.acspowersports.ca for a complete Application Guide.
BLACK MAX HELIX SKI-DOO We offer a large number of angles and will custom cut to your specs upon request. 4 4 Radius edge for less hang up and wear Spring holes are chamfered to prevent spring bind Aerospace coating for optimum smooth performance and durability Tapered Lead in Edge for easier installation Angles are progressive cut Reverse helixes available PROUDLY MADE IN CANADA
BLACK MAX HELIX POLARIS We offer a large number of angles and will custom cut to your specs upon request. 4 4 Radius edge for less hang up and wear Spring holes are chamfered to prevent spring bind Aerospace coating for optimum smooth performance and durability Tapered Lead in Edge for easier installation Angles are progressive cut Reverse helixes available PROUDLY MADE IN CANADA
BLACK MAX HELIX SKI-DOO QRS We offer a large number of angles and will custom cut to your specs upon request. Radius edge for less hang up and wear Tapered Lead in Edge for easier installation Angles are progressive cut STRAIGHT PROGRESSIVE 44 50 44/4 47/4 50/44 5/46 60/48 44/6 48/40 50/46 54/44 44/8 48/4 50/4 55/45 44/40 48/4 5/44 55/49 46/40 48/44 5/46 56/46 46/4 50/8 5/48 58/44 46/44 50/40 5/4 58/46 PROUDLY MADE IN CANADA
BLACK MAX HELIX SKI-D00 RER We offer a large number of angles and will custom cut to your specs upon request. Radius edge for less hang up and wear Spring holes are chamfered to prevent spring bind Aerospace coating for optimum smooth performance and durability Angles are progressive cut Reverse helixes available STRAIGHT 56 46 54 44 5 4 50 40 48 8 47 6 PROGRESSIVE 40/44 46/40 48/40 50/4 5/46 54/4 40/47 46/4 48/4 50/44 5/47 54/44 44/7 46/50 48/44 50/46 5/48 54/46 44/40 46/5 48/5 50/47 5/40 54/48 44/48 47/40 48/54 50/54 5/44 54/50 44/50 47/4 50/8 5/8 5/47 56/44 46/8 47/44 50/40 5/44 5/50 56/50 PROUDLY MADE IN CANADA
BLACK MAX HELIX SKI-DOO ROLLER We offer a large number of angles and will custom cut to your specs upon request. 4 4 Radius edge for less hang up and wear Spring holes are chamfered to prevent spring bind Aerospace coating for optimum smooth performance and durability Tapered Lead in Edge for easier installation Angles are progressive cut Reverse helixes available STRAIGHT 44 40 4 46 PROGRESSIVE 40/6 44/8 46/4 48/4 40/8 44/40 46/44 50/40 4/8 46/9 47/4 50/4 44/6 46/0 47/4 50/44 44/0 46/8 48/8 44/6 46/40 48/40 PROUDLY MADE IN CANADA
BLACK MAX HELIX ARCTIC CAT We offer a large number of angles and will custom cut to your specs upon request. Longer ramp for maximum shifting Aerospace coating for optimum smooth performance and durability Angles are progressive cut Reverse helixes available STRAIGHT 4 55 45 57 47 59 49 6 5 6 5 65 PROGRESSIVE 56/40 58/4 60/44 6/4 56/4 58/44 60/46 6/44 56/44 58/46 60/48 6/48 56/46 58/48 60/50 6/50 56/48 60/40 60/5 6/5 58/40 60/4 60/54 6/54 PROUDLY MADE IN CANADA
POWER SPORTS PARTS ALUMINUM WASHERS The Original ACS Washer! Thickness The washers are 0.00 thick for optimal strength. Dimensions The washer inside diameter is 5/6. There are two available outer diameters.75 and.75. Minimum weight. Maximum strength. Original ACS washer they are said to be the BEST on the market today! Made of a high strength aluminum alloy. Back side is counter-bored to insure a flat, snug fit against the track. Machined, not stamped, keeping material s strength at its best. PART # QUANTITY HOLE DIA. OUTER DIA. BW0-AL-0 0 /4.75 BW0-AL-96 96 /4.75 BW0-AL-500 500 /4.75 BW0-7AL-0 0 7mm.75 BW0-7AL-96 96 7mm.75 BW0-7AL-500 50 7mm.75 BW0-5AL-0 0 5/6.75 BW0-5AL-96 96 5/6.75 BW0-5AL-500 500 5/6.75 BW0-5AL-0 0 5/6.75 BW0-5AL-96 96 5/6.75 BW0-5AL-500 500 5/6.75 OTHER PRODUCTS Flexible Ice Scratcher Kit includes: carbide stud nut 5/6 x 8 Hex Bolt 0mm x 40 Hex Bolt 8mm X 5 mm The ACS Flexible Ice Scratcher is cutting edge with a design that allows the snowmobiler to reverse without snapping it. It has a replaceable carbide tip. It is easily bolted on and combines superb durability and universal fit for a great value. Reversible made from an aggregate polymer RMDS material that is both incredibly strong and extremely flexible allowing you to go forward or in reverse. No more breaking your scratchers. Replaceable Tips allows you to easily replace your Ice Scratchers tips at a minimum cost. Universal Quick and easy installation on virtually any snowmobile. 4 Nyloc Nut /4 4 Washer /4 4 Flat Head Bolt /4 x 0 x Lock Washer 5/6 Hex Head Bolt /8 x 6 x /4 Flat Washer /8 Nyloc Nut /8
Universal Ice Scratcher Kit The ACS Universal Ice Scratcher will fit on any sled and will drag along hard packed conditions to turn up the snow and ice to keep sliders and heat exchangers cool. When not needed the ice scratchers can be lifted and placed onto the skid frame so they are out of the way. Universal Ice Scratchers are sold in pairs. Design The ice scratcher is designed with spring tensioned super strong steel. Universal ACS Universal Ice Scratchers can be installed on virtually any snowmobile. Comes with clear installation instructions for a quick and easy fit. Kit includes: Right and left scratcher Two /8 Nyloc nuts Two /8 x -/ NCT bolts Two /8 lock washers Two /8 collars Spring Puller Tunnel Protectors This handy spring tool will remove exhaust pipe springs, tank or seat holding springs, cotter pins and many other hard to access parts. ACS Spring Pullers are made of steel and are zinc plated to resist rusting. Handling The ACS Spring Puller is designed with a T-handle to ensure a solid grip while removing springs. Length It has a length of 7-/ to reach those distances that are difficult to get to.
More than just powersports products Advanced Control Systems Corp. is a full service machine shop manufacturing high precision machined parts for use in the following industries: Powersports, Hydro, Swingstage, Refractory and Industrial. ACS equipment includes skin packaging, induction heating, CNC lathes from bar capacity and 5 to 0 chucks, CNC mills, welding and bending capabilities and includes full Quality Control facilities. We machine various types of material Steel, Aluminum, Copper, Stainless, Plastic or Brass. We do short or long runs, with a high degree of quality at a competitive price. POWER SPORTS PARTS ADVANCED CONTROL SYSTEMS CORP. Paisley Lane, Stouffville, Ontario L4A 7X4 Tel: 905-64-056 Fax: -866-45-574 www.acspowersports.ca For your next project, give ACS a call!