Fortimo LED line high flux Fortimo LED line 2 ft 4000 lm 1R LV1 The Fortimo LED Line high flux systems consist of linear white light LED modules with high flux, high energy efficiency, and high quality of light. These smart systems are completed with the Xitanium drivers, which enable easy generation management (future proof) and offer the flexibility to meet the broad variety of application requirements. The Fortimo LED Line high flux systems are designed to replace fluorescent lighting in higher application heights, such as trunking, high bay and battens in warehouses, factories, and big retail stores. Benefits Enabling luminaires for high application heights High energy efficiency Flexible specification due to smart Xitanium drivers Part of Philips guarantee scheme* Applications Fortimo LED Line high flux system are ideal for application at higher application heights where more light is needed, such as trunking, battens, high-bay applications Typical segments are warehouses, factories, big retail stores, cold storage Features Lumen levels up to 2000 lm/ft Efficiency levels surpassing T5 systems High quality white light Long lifetime * Guarantee scheme only applicable if the Fortimo LED Lines are ordered in multiples of 32 pcs.
Commercial product name EOC 12NC Fortimo LED line 2ft 4000lm 830 1R LV1 8718291 695066 00 9290 008 60103 Fortimo LED line 2ft 4000lm 840 1R LV1 8718291 695080 00 9290 008 60303 Optical characteristics - table per CCT Fortimo LED line 2 ft 4000 lm 830 1R LV1 Luminous flux 3520 3805 4090 lm Module efficiency 114 125 136 lm/w Correlated color temperature (CCT)* 3000 K Correlated color temperature (CCT)** 3070 K Color coordinates (CIEx, CIEy) (0.432, 0.402) - Color consistency*** 3.5 SDCM CRI 80 - Radiation angle 120 deg Note: Tc nom = 55 C I nom = 930 ma * CCT for characterisation ** CCT of target color point *** Note: 3.5 SDCM color consistency specification may not be sufficient for applications that are sensitive to color differences like wall washers, which typically require 2 SDCM. Relative intensity (a.u) 1 0.8 0.6 0.4 0.2 0 380 430 480 530 580 630 680 730 780 830 Wavelength (nm) 2-9
Fortimo LED line 2 ft 4000 lm 840 1R LV1 Luminous flux 3705 4005 4305 lm Module efficiency 120 132 143 lm/w Correlated color temperature (CCT)* 4000 K Correlated color temperature (CCT)** 4030 K Color coordinates (CIEx, CIEy) (0.380, 0.377) - Color consistency*** 3.5 SDCM CRI 80 - Radiation angle 120 deg Note: Tc nom = 55 C I nom = 930 ma * CCT for characterisation ** CCT of target color point *** Note: 3.5 SDCM color consistency specification may not be sufficient for applications that are sensitive to color differences like wall washers, which typically require 2 SDCM. Relative intensity (a.u) 1 0.8 0.6 0.4 0.2 0 380 430 480 530 580 630 680 730 780 840 Wavelength (nm) Beam shape The Philips Fortimo LED Line generates a Lambertian beam shape, which is a pragmatic starting point for OEMs wishing to design secondary optics. 120 180 120 90 90 60 100 60 200 300 30 (cd/1000 lm 30 300 0 L.O.R.= 1.00 0-180 90-270 45-225 lmax 3-9
Electrical characteristics Forward voltage 31.1 32.7 34.3 V Power consumption 28.9 30.4 31.9 W Minimum dimming for performance 10 % Number of parallel modules per chain 1 Bins 2 (D and C) Note: Tc nom = 55 C I nom = 930 ma Lifetime Lumen maintenance B50L70 50,000 hrs Δu'v at 6,000 hours 0.007 - Critical failures no spec known % Note: Tc< 75 C, I<1040 ma Parameter Nominal * Life** Max*** Tc [ C] 55 75 90 Current [ma] 930 1040 1120 * Nominal value at which performance is specified ** Value at which lifetime is specified *** Maximum value for safety Performance at I life and Tc life Flux [lm] Efficiency [lm/w] 3000 K 4065 119 4000 K 4275 126 Abs max ratings Current Imax 1120 ma Case temperature Tc max 90 C ESD (direct contact) 8 kv ESD (air) 15 kv Isolation breakdown voltage 500 Vdc Ambient temperature -20 C Wiring Specification item Value Unit Condition Input wire cross-section 0.2 0.75 mm 2 Solid and fine stranded 18 24 AWG Input wire strip length 6 7 mm Tested cable length* 4000 mm Total length of wiring including LED modules, one way * Note: connector suited for robot wiring 4-9
Mechanical characteristics Length 560.4 560.7 561 mm Width 39.8 40 40.2 mm Height excl. connector 1.5 1.65 1.8 mm Height incl. connector 5.8 6.15 6.5 mm Warpage (IPC-TM-650) 4.2 mm Note: Bow & Twist of the PCB after production tested and released according IPC-TM-650 2.4.22 560.70 16 43.85 36.55 43.45 43.45 36.55 60.50 A (4:1) Ø 0.25 40 22 10 IN IN 8 A 14.30 12.7 7.75 1.5 Ø4.75 42 x 12.7 + 14.3 = 547.7 +/- 0.3 29.85 110 110 30.50 4.34 0.83 1.65 5.99 Hole allows wire feed through Connector, suited for robot wiring Polarity sensitive Screw hole (6x) IN IN Module specific info sticker Tc point Approbation and conformity marks Area suited for clamping (10x) 5-9
Application information September 12, 2013 Compliance and approval IEC / EN 62031, IEC / EN 62471, UL 8750 Environmental RoHS / REACH Application information Zhaga Designation of the ECG housing (book-1 / annex C) BL4 Designation of the Book-7 LLE category L56W4 Luminous Flux category C040 CCT category 4000 K CRI 80 A plain-text-file with a format as defined in Book-7, section 4.5 www.philips.com/technology/ A greyscale image with a format as defined in Book-7, section 4.5 www.philips.com/technology/ The position of the temperature measurement point tp same as Tc point The value of tp, max 75 The value of tp, headroom 22 IP rating Overheating protection Luminaire class No IP rating No protection UL Class 2/ IEC Class II or Class III 6-9
Tuning information September 12, 2013 Flux and efficacy versus current Relative value (%) 120% 110% 90% 80% 70% 60% 50% 40% 0.20 0.40 0.60 0.80 1.00 1.20 LED line current (A) Luminous flux Efficacy Flux and efficacy versus temperature at Tc Relative value (%) 106% 105% 104% 103% 102% 101% 99% 98% 97% 96% 95% 94% 20 30 40 50 60 70 80 Tcase ( C) Luminous flux Efficacy 7-9
Lumen maintenance September 12, 2013 Lumen maintenace B10/B50 Fortimo LED Line 2 ft 4000 lm 1R LV1 Lumen maintenance (%) Ref: 18W T8 B10 B50 Specification cation Min.B50L70 0% Lumen depreciation (%) 30,000 hours proven by certified laboratory 0% The B10 and B50 graphs show expected lumen maintenance at current life and Tc life 0 10,000 20,000 30,000 40,000 50,000 60,000 Operating lifetime (hours) Lumen maintenace T-case Fortimo LED Line 2 ft 4000 lm 1R LV1 Lumen maintenance (%) Tc max 90 C Tc nom 55 C Tc life 75 C Specification cation Min.B50L70 0% Lumen depreciation (%) 30,000 hours proven by certified laboratory 0% The B50 graphs show expected lumen maintenance at current life 0 10,000 20,000 30,000 40,000 50,000 60,000 Operating lifetime (hours) 8-9
2013 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract,is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. Date of release: 09/2013 Data subject to change. www.philips.com