INSTRUCTION MANUAL PS4 JUGGERNAUT VER 7.0

INSTRUCTION MANUAL PS4 JUGGERNAUT VER 7.0 Congratulations, welcome to the GamerModz Family! You are now a proud owner of a GamerModz Custom Modded Controller. The JUGGERNAUT - VER 7.0 FOR PS4 has been completely redesigned from the ground up to maximize your gameplay experience. It includes a much faster processor allowing you turn mods on and off much quicker than previous releases. Additionally, we have added many new mods as well as an on/off feature that allows you to use the controller as standard controller without the possibility of accidently turning a mod on. Your new GamerModz JUGGERNAUT Controller includes the following mods (Note you must be in the Juggernaut Mode to enable these mods. See Page 2): Rapid Fire (15 Pre-Set Modes)... Page 2 Adjustable Rapid Fire (5 Programmable Modes)... Page 4 Left Trigger Rapid Fire... Page 6 Akimbo Mod... Page 6 Jitter Mod... Page 7 Auto Break... Page8 Auto Reload... Page 9 Jump Shot... Page 9 Boost Shot... Page 10 Max Boost Shot... Page 10 Auto Drop... Page 11 Drop Shot... Page 11 Slide Shot... Page 11 Auto Run... Page 12 Double Tap... Page 12 Auto Burst (4 Modes)... Page 13 Auto Aim... Page 14 Auto Breath... Page 14 Quick Scope (5 Programmable Modes)... Page 15 Fast Reload (5 Programmable Modes)... Page 17 Zombie Mode... Page 20 Toggle L1/R1 and L2/R2... Page 21 Remappable Pro Buttons (Optional Add On)... Page 22 IMPORTANT: Verify that your GamerModz Juggernaut Controller is Version 4 by following the instructions below. The LED will flash 7 times indicating Version 7., then

*** IMPORTANT *** TOP LEVEL MODES All GamerModz Controllers have been redesigned to have a top level on/off feature. Your JUGGERNAUT controller is designed with the following top level modes: Mode 1: Juggernaut Mod Mode 2: Zombie Mode Mode 3: Off (All Mods Disabled) IMPORTANT: When you first power on your controller, you will begin in Mode 3. To change modes, hold down the Left Thumbstick and tap the Right on the D-Pad the number of times corresponding to the mode you would like, then release the Left Thumbstick. The LED will flash the number of times corresponding to the mode selected. RAPID FIRE MODES Your GamerModz Controller comes with 20 Rapid Fire Modes. Modes 1 thru 5 are custom programmable modes that are user re-programmable for quick access. Modes 6 thru 20 are preset modes ranging from 6 shots per second to 20 shots per second.

SELECTING A RAPID FIRE MODES To enter a rapid fire mode, Hold Down the Right Trigger, and tap Up on the D-Pad the amount of times corresponding to the mode you would like to enter, then Release the Right Trigger. The PS4 Controller LED will flash the number of times corresponding to the mode you selected. X times, then Mode # MODE 1 ---------------- X 1 CUSTOM MODE 11 ----------------- X 11 11 SHOTS PER SECOND MODE 2 ---------------- X 2 CUSTOM MODE 12 ----------------- X 12 12 SHOTS PER SECOND MODE 3 ---------------- X 3 CUSTOM MODE 13 ----------------- X 13 13 SHOTS PER SECOND MODE 4 ---------------- X 4 CUSTOM MODE 14 ----------------- X 14 14 SHOTS PER SECOND MODE 5 ---------------- X 5 CUSTOM MODE 15 ----------------- X 15 15 SHOTS PER SECOND MODE 6 ---------------- X 6 6 SHOTS PER SECOND MODE 16 ----------------- X 16 16 SHOTS PER SECOND MODE 7 ---------------- X 7 7 SHOTS PER SECOND MODE 17 ----------------- X 17 17 SHOTS PER SECOND MODE 8 ---------------- X 8 8 SHOTS PER SECOND MODE 18 ----------------- X 18 18 SHOTS PER SECOND MODE 9 ---------------- X 9 9 SHOTS PER SECOND MODE 19 ----------------- X 19 19 SHOTS PER SECOND MODE 10 ------------- X 10 10 SHOTS PER SECOND MODE 20 ----------------- X 20 20 SHOTS PER SECOND TURN ON/OFF RAPID FIRE QUICKLY To enable/disable Rapid Fire, Hold Down the Right Trigger, Tap Down on D-Pad, then Release the Right Trigger. Note: If you turn Rapid Fire on this way, the Juggernaut Controller will default to the last Rapid Fire Mode enabled.

ADJUSTABLE RAPID FIRE MODES Your GamerModz Juggernaut Controller comes with 5 Programmable Modes - Modes 1 thru 5. To program a Mode, you must first select the mode (Reference Toggle Between Rapid Fire Modes on Page 2). Once you are in the Mode you wish to Program (Only applies to Modes 1 thru 5) follow the instructions below to Program that Mode. Your GamerModz Juggernaut Controller will remember the Re-Programmable Mode settings even after you turn your controller off. PROGRAMMING ADJUSTABLE RAPID FIRE MODES Once you are in the Mode you wish to Program, Hold Down the Right Trigger, then Hold Up on D-Pad until the LED begins to flash. Release both the Right Trigger and Up on D-Pad., then Until LED Begins to Flash, then Once in Programming Mode you can adjust your shots per second by Tapping Up on D-Pad to Increase Shots per Second and by Tapping Down on the D-Pad to Decrease Shots per Second. Note: Each time you Tap the D-Pad, your Rate of Fire will Increase or Decrease 1 Shot per Second. To test the Rapid Fire Rate, fire your weapon by pulling the Right Trigger. Adjust your Rapid Fire Rate by Tapping Up or Down on the D-Pad until the desired smoothness and rate of fire is achieved. Please see graph on Page 4 for Reference. Once you have the desired Rapid Fire Setting, Tap Right on D-Pad to lock in the rate of fire. The PS4 LED will flash the number times corresponding to your rate of fire. For Example: 12 Shots per Second, The LED will flash 12 times. = Increase Rate of Fire = Decrease Rate of Fire = Lock Rate of Fire

OPTIMIZING ADJUSTABLE RAPID FIRE The below graph is a visual representation on how Adjustable Rapid Fire works for your GamerModz Juggernaut Controller. This will help you manually adjust your Rapid Fire to the optimal rate of fire by understanding how GamerModz Rapid Fire works. Faster than Max Fire Rate Weapon is Stuttering or Not Firing at All MAX Weapon Fire Rate Weapon is Firing too Slowly Slower than MAX Fire Rate Notes: It is possible for the Rapid Fire to be so fast that it does not register in the game. If this occurs, try slowing it down at times. Slowing automatic weapons down to reduce recoil and increase accuracy can be effective too.

LEFT TRIGGER RAPID FIRE MOD Left Trigger Rapid Fire allows you to assign rapid fire to your left trigger only. Note: You must first have a Rapid Fire Mode turned on (See Page 2) to enable Left Trigger Mod. To enable/disable Left Trigger Rapid Fire, Hold Down the Left Trigger and Tap Down on the D-Pad. Then Release Left trigger. The PS4 Controller LED will flash one time to indicate that the Left Trigger Rapid Fire Mode has been toggled on/off. AKIMBO MOD The Akimbo Mod allows you to fire both weapons with a single trigger pull. This mod will work with Rapid Fire on or off for greater flexibility. To enable/disable the Akimbo Mod, Hold Down the Left Trigger and Right Trigger and Tap UP on the D-Pad. Then Release Both Triggers. The PS4 Controller LED will flash one time to indicate that the Akimbo Mod has been toggled on/off.

JITTER MOD The Jitter Mod Is designed for specific releases of Call of Duty. It allows you to hip fire various weapons as fully automatics. Please note you must have the Juggernaut Mod Enabled before being able to use Jitter. Important Notes: 1. For Infinite Warfare, you must have Dexterity and Gung Ho Perks in your Class 2. You must have a Tactical to use Jitter for Infinite Warfare and we recommend Trophy System 3. You must have the Slight Of Hand Perk for Black Ops 2 and Modern Warfare Remastered 4. When Jitter is enabled, Auto Reload and Auto Break is also enabled. 5. Enabling a Mod that does not work with Jitter (See Page 17) will disable Jitter. 6. The Jitter Mod is a Glitch and the very nature of the glitch is that sometimes it will be glitch during use. 7. Holding down Left Trigger will temporarily disable Jitter. This feature allows you to pick up enemy guns and scope in and use when needed. To select a Jitter Mode, Hold Down the Button and Tap the D-Pad in the direction and the number of times (See Below) corresponding to the desired mode. Then Release the Button. The PS4 Controller LED will flash the number of times corresponding with the mode enabled. Note: You can switch between Jitter Modes without disabling the current Jitter Mode by selecting the mode you want to use. Modern Warfare Remastered MODE D-PAD DIRECTION WEAPONS MODE 1 D-PAD RIGHT, 1 TIME W1200 Black Ops 2 MODE D-PAD DIRECTION WEAPONS MODE 1 D-PAD LEFT, 1 TIME MOST SEMI AUTOMATICS AND BURST WEAPONS Infinite Warfare MODE D-PAD DIRECTION WEAPONS MODE 1 D-PAD UP, 1 TIME REAVER MODE 2 D-PAD UP, 2 TIMES BANSHEE MODE 3 D-PAD UP, 3 TIMES DCM-8 MODE 4 D-PAD UP, 4 TIMES RACK 9, S-RAVAGE

TURNING OFF THE JITTER MOD To disable the Jitter Mod, Hold Down the Button and Tap Down on the D-Pad. Then Release the Button. The XBOX One Controller LED will flash one time to indicate that the mod has been disabled. AUTO BREAK MOD The Auto Break Mod allows you to instantly break your reload by simply pulling the Right Trigger. There are 3 modes of auto break allowing versatility between different versions of Call of Duty as well as other games! To enable Auto Break Mod, Hold Down the Square Button, Tap Right on D-Pad, then Release the Square Button. The Controller LED will flash the amount of times corresponding to the Auto Break mode you entered. Example: If you held square and tapped the D-Pad right 3 times, the LED would flash 3 times confirming you entered mode 3. MODE D-PAD DIRECTION WEAPONS MODE 1 D-PAD RIGHT, 1 TIME SPECIALIST BREAK INFINITE WARFARE MODE 2 D-PAD RIGHT, 2 TIMES SPRINT BREAK MODE 3 D-PAD RIGHT, 3 TIMES YY BREAK (ALL COD GAMES & MANY OTHERS)

AUTO RELOAD MOD The Auto Reload Mod will automatically put you in to a reload when you are done shooting and/scoping. This would normally be dangerous however, enabling this feature will also automatically enable the Auto Break Mod guaranteeing you won t get caught in a reload! There are 3 modes of auto break allowing versatility between different versions of Call of Duty as well as other games! To enable/disable Jump Shot, Hold Down the Square Button, Tap Right on D-Pad, then Release the Square Button. The Controller LED will flash one time to indicate that the Jump Shot Mod has been toggled on/off. MODE D-PAD DIRECTION WEAPONS MODE 1 D-PAD RIGHT, 1 TIME SPECIALIST BREAK INFINITE WARFARE MODE 2 D-PAD RIGHT, 2 TIMES SPRINT BREAK MODE 3 D-PAD RIGHT, 3 TIMES YY BREAK (ALL COD GAMES & MANY OTHERS) JUMP SHOT MOD The Jump Shot Mod allows you to jump and fire at the same time by simply pulling the Right Trigger. To enable/disable Jump Shot, Hold Down the X Button, Tap Right on D-Pad, then Release the X Button.

BOOST SHOT MOD The Boost Shot Mod allows you to boost jump using 50% of your boost and fire at the same time by simply pulling the Right Trigger. To enable/disable Boost Jump Shot, Hold Down the X Button, Tap Up on D-Pad, then Release the X Button. The PS4 Controller LED will flash one time to indicate that the Boost Jump Shot Mod has been toggled on/off. MAX BOOST SHOT MOD The Max Boost Shot Mod allows you to boost jump using 100% of your boost and fire at the same time by simply pulling the Right Trigger. To enable/disable Max Boost Jump Shot, Hold Down the X Button, Tap Left on D-Pad, then Release the X Button. The PS4 Controller LED will flash one time to indicate that the Jump Shot Mod has been toggled on/off.

AUTO DROP MOD The Auto Drop Mod allows you to drop to the ground quickly by simply tapping the O Button. To enable/disable Auto Drop, Hold Down the O Button, Tap Right on D-Pad, then Release the O Button. The PS4 Controller LED will flash one time to indicate that the Auto Drop Mod has been toggled on/off. DROP SHOT MOD The Drop Shot Mod allows you to drop to the ground and fire at the same time by simply pulling the Right Trigger. To enable/disable Drop Shot, Hold Down the O Button, Tap Right on D-Pad, then Release O Button The PS4 Controller LED will flash one time to indicate that the Drop Shot Mod has been toggled on/off. SLIDE SHOT MOD The Drop Shot Mod allows you to drop to the ground and fire at the same time by pulling the Right Trigger. To enable/disable Slide Shot, Hold Down the O Button, Tap Left on D-Pad, then Release O Button The PS4 Controller LED will flash one time to indicate that the Slide Shot Mod has been toggled on/off. NOTE: You must be either walking or running forward to perform slide shot. If you are standing still you will perform drop shot.

AUTO RUN MOD The Auto Run Mod allows you to run without pressing in the Left Stick Left Stick normally.. To use Auto Run, simply use the To enable/disable Auto Run, Press In & Hold the Left Thumbstick, Tap Up on D-Pad, then Release the Left Thumbstick. The PS4 Controller LED will flash one time to indicate that the Auto Run Mod has been toggled on/off. Note: Certain button presses will temporarily disable Auto Run, ). To quickly re-enable, Press In on the Left Stick and Release. DOUBLE TAP MOD The Double Tap Mod fires your weapon one time when you press the Right Trigger and fires again when you release the Right Trigger. To enable/disable Double Tap, Hold Down Right Trigger, Tap Right on D-Pad 1x, then Release the Right Trigger. The PS4 Controller LED will flash one time to indicate that the Double Tap Mod has been toggled on/off.

BURST MODE Burst Mode allows you to set the number of shots fired with each trigger pull. Your GamerModz Juggernaut Controller comes with 4 Settings for Burst Mode. To enable Burst Mode - Rapid Fire must first be enabled (See Page 2 Toggle Between Rapid Fire Modes ) Hold Down the Right Trigger and Tap Right on the D-Pad the number of times corresponding to the Burst Mode below. Then Release the Right Trigger. The PS4 Controller LED will flash the number of times corresponding to the mode selected, indicating that Burst Mode has been toggled on. To disable Burst Mode Hold Down the Right Trigger and Tap Right on the D-Pad 6 or more times, then Release the Right Trigger. The PS4 Controller LED will flash one time to indicate that Burst Mode has been toggled off., then X Mode #, then MODE 2 ----------------- X 2 MODE 3 ----------------- X 3 MODE 4 ----------------- X 4 MODE 5 ----------------- X 5 TURN OFF -------------- X 6 2 ROUND BURST 3 ROUND BURST 4 ROUND BURST 5 ROUND BURST DISABLE BURST MODE Notes: You must have Rapid Fire Enabled to Enable Burst Mode. If Rapid Fire is not Enabled, Enabling Burst Mode will fail. Gameplay Tips: Combine Burst Mode with a Weapon s Optimal Max Fire Rate to increase accuracy and save on Ammo.

AUTO AIM MOD The Auto Aim Mod automatically pulls up your scope when you pull the Right Trigger to fire. To enable/disable Auto Scope, Hold Down the Left trigger and Right Trigger, then Tap Left on the D- Pad. Then Release the Left Trigger and Right Trigger. The PS4 Controller LED will flash one time to indicate that the Auto Aim Mod has been toggled on/off. + + AUTO BREATH MOD The Auto Breath Mod steadies the aim, by automatically holding your breath when you are scoped in with a sniper rifle. Note: You can still run out of breath! To enable/disable Auto Breath, Hold Down the Left trigger and Press In Left Thumbstick, then Tap Down on the D-Pad. Then Release the Left Trigger and Left Thumbstick. The PS4 Controller LED will flash one time to indicate that Auto Breath has been toggled on/off. + +

QUICK SCOPE MOD CHOOSING A MODE The Quick Scope Mod has 5 Programmable Modes. Quick Scope Mod allows the user to time perfectly the function of scoping in and firing the weapon at the exact moment accuracy is achieved by simply tapping the Left Trigger. To enable a Quick Scope Mode, Hold Down on the Left Trigger, then Tap Left on the D-Pad the number of times corresponding the Mode you would like to select. Then Release the Left Trigger. The PS4 Controller LED will flash the number of times corresponding to the Mode you have Enabled. To disable Quick Scope, Hold Down the Left trigger, Tap Right on the D-Pad, then Release the Left Trigger. The PS4 Controller LED will flash one time to indicate that Quick Scope has been disabled., then X Mode #, MODE 1 ----------------- X 1 MODE 2 ----------------- X 2 MODE 3 ----------------- X 3 MODE 4 ----------------- X 4 MODE 5 ----------------- X 5 CUSTOM CUSTOM CUSTOM CUSTOM CUSTOM

QUICK SCOPE MOD PROGRAMMING A MODE The Quick Scope Mod has 5 Programmable Modes. Once you are in the Mode you wish to Program, Hold Down the Left Trigger and Hold Down Left on D-Pad until the LED Begins Flashing, then Release the Left Trigger. The PS4 Controller LED will flash 5 times letting you know that you are now in Programming Mode. Until LED, then Begins to Flash X 1, then Once in Programming Mode you can adjust the timing of the Quick Scope Mod. Please follow the steps below to optimize the timing for quick scope. Step 1: Go into a game; choose a load out with the sniper rifle you want to configure and locate a wall in the game that you can fire at. Be aware that perks that change the weapon ready speed, different scopes, etc. - will affect optimal timing of the Quick Scope Mod. Step 2: Enable the Quick Scope Mode you would like to Program (Refer to Page 10 Quick Scope Mod Choosing a Mode ) Step 3: Enter Programming Mode (See Above) Step 4: Tap Up on the D-Pad to Increase or Down on the D-Pad to Decrease the time between how long the scope takes to come up and when the firing happens. After every adjustment you can test the setting by Tapping the Left Trigger. What you are looking for when testing is finding the setting where every time you tap the Left Trigger, the scope comes up, the gun fires and all the rounds hit the same spot on the wall. By default, all 5 Modes are configured for the L115 in Call of Duty Ghosts with no perks on that affect the timing. Step 5: Once you have found the ideal setting, Tap Left on the D-Pad and the LED will flash the corresponding amount of times for that setting. For example, a Setting of 50, will flash the LED 50 times. Note: To setup a different Quick Scope Mode, simply enter the mode and repeat the programming process above.

FAST RELOAD MOD CHOOSING A MODE The Fast Reload Mod has 5 Programmable Modes. Fast Reload cuts out the animation time and speeds up the reloading process. To enable a Fast Reload Mode, Hold Down on the Square Button, then Tap Up on the D-Pad the number of times corresponding the Mode you would like to select. Then Release the Square Button. The PS4 Controller LED will flash the number of times corresponding to the Mode you have enabled. To disable Fast Reload, Hold Down the Square Button, Tap Down on the D-Pad, then Release the Square Button. The PS4 Controller LED will flash one time to indicate that Fast Reload has been disabled., then X Mode #, MODE 1 ----------------- X 1 MODE 2 ----------------- X 2 MODE 3 ----------------- X 3 MODE 4 ----------------- X 4 MODE 5 ----------------- X 5 CUSTOM CUSTOM CUSTOM CUSTOM CUSTOM

FAST RELOAD MOD PROGRAMMING A MODE The Fast Reload Mod has 5 Programmable Modes. Note: Start around a setting of 22 and go from there! Once you are in the Mode you wish to Program, Hold Down the Square Button and Hold Down Up on D- Pad until the PS4 LED begins to flash, then Release the Square Button. The PS4 Controller LED will flash 5 times letting you know that you are now in Programming Mode. Until LED Begins to Flash Once in Programming Mode you can adjust the timing of the Fast Reload Mod. Please follow the steps below to optimize the timing for Fast Reload. Step 1: Go into a game; choose a load out with the weapon you want to configure Fast Reload for. Be aware that perks like slight-of-hand cannot be used with the Fast Reload Mod. Step 2: Choose the Fast Reload Mode you would like to Program (Refer to Page 12 Fast Reload Mod Choosing a Mode ) Step 3: Enter Programming Mode (See Above) Step 4: Tap Up on the D-Pad to Increase or Down on the D-Pad to Decrease the time to optimize Fast Reload timing. After every adjustment you can test the setting it by Tapping the Square Button. The way Fast Reload works is by eliminating animation time. You are trying to set Fast Reload timing at the point where he puts the clip in, the swap weapons glitch happens and your clip ends up fully loaded without waiting for the extra animation of the reload. Increase the speed (Up on D-Pad ) and keep testing until the full reload does not happen. Then decrease the speed (Down on D-Pad ) until it's fully reloading your clip again. This will bring you to the fastest possible speed for the mod. Remember, every weapon is different so there is no "one size fits all setting. By default, all 5 Modes of Fast Reload are configured for the SVU in Call of Duty Ghosts with no perks on that affect the timing. Step 5: Once you have found the ideal setting, Tap Right on D-Pad to save the setting and the LED will flash the corresponding amount of times for that setting. For example, a Setting of 22, will flash the LED 22 times. Note: To setup a different Fast Reload Mode, simply enter the mode and repeat the programming process above.

Quick reference Guide Below is a quick reference chart showing what mods work with each other as well as some additional information on the functionality of your GamerModz Juggernaut controller. Rapid Fire Left Trigger Rapid Fire Dual Trigger Rapid Fire Jitter Slide Shot Drop Shot Auto Drop Max Boost Shot Boost Shot Jump Shot Auto Run Double Tap Auto Burst Auto Aim Auto Breath Quick Scope Fast Reload Rapid Fire Left Trigger Rapid Fire Dual Trigger Rapid Fire Jitter Slide Shot Drop Shot Auto Drop Max Boost Shot Boost Shot Jump Shot Auto Run Double Tap Auto Burst Auto Aim Auto Breath Quick Scope Fast Reload

ZOMBIE MODE The Juggernaut 6.0 comes with a new mode called Zombie Mode (Mode 2). Zombie Mode is beneficial on Single Player Zombie where Auto Aim can be utilized. Zombie Mode has the following Mods: Auto Run (Ref. Page 9) Rapid Fire with Auto Aim To change to Zombie mode, hold down the Left Thumbstick and tap Right on the D-Pad 2 times, then release the Left Thumbstick. The LED will flash 2 times corresponding to the mode selected., then 2x, then ENABLE/DISABLE RAPID FIRE WITH AUTO AIM To enable/disable Rapid Fire with Auto Aim, Hold Down the Right Trigger, Tap Down on D-Pad, then Release the Right Trigger. The PS4 Controller LED will flash one time to indicate that the Rapid Fire with Auto Aim has been toggled on/off.

TOGGLING BETWEEN L1/R1 AND L2/R2 Your GamerModz Controller is set up where you can choose to use the default layout of L2/R2 as your primary buttons or Flip the layout to L1/R1 to Zoom and Shoot. To change modes, hold down the Left Thumbstick and hold down Down on the D-Pad until the main LED flashes. The LED flashing indicates that the layout was changed for the mods. IMPORTANT: Your GamerModz controller comes default as L2/R2 as primary. If you would like to flip the layout to L1/R1 you must follow the instructions below as well as flip your layout in the controller layout options of the console. ***If you flip mode to L1/R1 all instructions that call for R2/L2 will need to be replaced with R1/L1, respectively.

INSTRUCTION MANUAL LED PRO BUTTONS FOR PS4 (OPTIONAL ACCESSORY) The GamerModz LED Pro Buttons allows you to remap the following buttons to either of the Pro Buttons: A, B, X, Y, LB, RB, LT, RT, L3, R3, D-Pad Up, D-Pad Down, D-pad Left, D-Pad Right NOTE: Guide Button, Menu Button and View Button Cannot be Remapped Additionally, you we have given you the ability to have 5 Modes (Profiles) allowing you program 5 different scenarios. The controller will save the profiles for you, even when you turn the controller off. You can change any of the profiles at any time using the instruction below. CYCLING THROUGH PRESETS To cycle through the Presets hold the Left Thumbstick and Tap Left on the D-Pad the number of times corresponding to the mode/preset you want. The Main LED will flash the number of times corresponding to the mode/preset chosen. Additionally, if presets 1-5 are chosen, the LED Pro Mods will Light Up., then, X Times TAP UP ON D-PAD PRESET 1 TIME PRESET 1 2 TIMES PRESET 2 3 TIMES PRESET 3 4 TIMES PRESET 4 5 TIMES PRESET 5 6 TIMES OFF

DISABLING PRO BUTTONS To disable the Pro Buttons, Left Thumbstick and Tap Left on the D-Pad 6 Times. The PS4 Controller LED will flash one time to indicate that the Pro Buttons have been off., then, 6 Times PROGRAMMING A PRESET FOR BUTTON REMAPPING To program a Pre-Set, first cycle to the Preset you wish to program (Refer to Instructions Above). Once you are in the Preset you want to Program, hold the Left Thumbstick and Left on D-Pad until the Main LED begins to flash indicating you are in programming mode. Once you are in programming mode, simply hold the button you want to remap, tap the Pro Button you would like to remap it to, then release. The Main LED will flash once letting you know that the remap was successful. Repeat this step to assign another button to the other Pro Button. Once you have finished assigning remaps to the Pro Buttons, hold the Left Thumbstick and Left on D-Pad to save the Preset. The Main LED will flash 5 times, letting you know that you have successfully saved the Preset. You can then repeat the above steps to Program all of your presets. Note that your presets will be saved even after you turn your controller off. ****** Important! Read Below! ****** The GamerModz LED Pro Buttons allows you to remap the following buttons/actions: S, O, T, X, L1, R1, L2, R2, L3, R3, D-Pad Up, D-Pad Down, D-pad Left, D-Pad Right NOTE: Guide Button, Menu Button and View Button Cannot be Remapped

FREQUENTLY ASKED QUESTIONS Q: My Controller is acting crazy! How do I get it to stop? If you notice your controller is inputting all kinds of commands that you do not want, you may want to deactivate the unnecessary mods that may be active. If you are unsure what mods are active, simply perform the Master Reset below. Q: I ve See GamerModz Controllers shoot really, really fast! But my Rapid Fire is really slow. What s the deal? If your weapon is firing too slowly, it that either your weapon is not compatible with rapid fire (e.g. Rocket Launcher) or it could mean that you do not have the Rapid Fire Shots per Second set high enough. Q. My Rapid Fire is jumping or stuttering, how do I get it to stop? If your rapid fire is not shooting consistently and seems to be stuttering, you have set the Shots per Second too high. This means the controller is trying to fire your weapon at a speed that is not compatible with the particular game and weapon. Try decreasing your shots per second. Q. What if I have a question that isn t listed here! That s no problem, we re happy to help. You can find us on Facebook, YouTube, Twitter, LiveChat via our Site or by Phone. Give us a call Monday thru Friday, 9:00 am to 5:00 PM (EST) and a customer service representative will assist you ASAP! MASTER RESET If you are experiencing problems with your controller and would like to reset to factory default settings, turn your controller off and then back. Then simply Hold Down the Right Trigger and Left Trigger, Tap the sequence below, then Release Left Trigger and Right Trigger, then