Passion Passion in high in high frequency Passion Passion in high in high frequency Coaxial, connectors adaptors for radio communications Your dealer SSB-Electronic GmbH Ostenfeldmark 59557 Lippstadt/Germany +49 29 41/9 33 85-0 Fax +49 29 41/9 33 85-1 www.eclex-usa.com Specifications are subject to change. You need the best connection!
10 Plus Stred center conductor Technical data with aluminium core Plus weldet shield Typ. attenuation (db/100 m @ C) Centre conductor...... Hybrid, aluminium core 7 x 1.0 mm 5 MHz... 0.9 1000 MHz...14.0 Centre conductor Ø... 2.85 mm 10 MHz... 1.3 1296 MHz...16.2 50 MHz... 2.85 1500 MHz...6 Dielectric... PE, low-loss compound ex 10 Dielectric Ø... 7.25 mm Ecl Outer conductor 1... foil, PE-coated Shielding factor... 100 % 10 Plus - ultraflexible low loss coaxial Outer conductor 2... braid Shielding factor... 72 % 10 Plus15 ultraflexible low Plus - the innovative 10 is a flexible, low-loss coaxial specifically desigloss coaxial ned for use up to 6 GHz. Advanced techniques themanufacturing latest generation Coaxial 10 Plus Cable - ultraflexible low combined with the use a low-loss PE-LLC dielectric yields a 10 Plus is a flexible, low-loss coaxial specifically loss coaxial foaming rate more than 70%. This results in very low attenu- designed The for use to 8 GHz. Advanced manufacturing tech-specifica15 Plus has remarkably improved newup Sheath... black heatex PVC, UV-resistant 10 Plus characteristics Diameter... 10.2 mm Impedance... 50 15 Plus... characteristics Attenuation @ 1 GHz/100m 14.0 db fmax... 8 GHz ation. 10 sets stards among flexible coaxial s. Diameter...14.6 mm niques combined withlow-loss the use a low-loss PE-LLC dielectric 10 is a flexible, coaxial specifically desigtions, electricalmechanical-wise: 15 Plus takes 10 Plus characteristics The flexibility 10 is further enhanced through the Impedance... 50 Diameter... 10.2 mm ned forause up to 6rate GHz. manufacturing yields foaming than 70%. This techniques results very advantage Advanced amore high-precision-hybrid inner in conductor with use a stred, oxygen-free center conductor. Use Attenuation @ 1 GHz/100 m...9.1 db Impedance... 50 combined with the use a low-loss PE-LLC dielectric yields a low attenuation. Plus sets stards among flexible aluminium core10 welded proprietary techniques, continuous center shield. conductor calibratifmax... 8 GHz Attenuation @ 1 GHz/100m... 14.0 db foamings. rate more This results in flexible very 10 low Plus attenuguacoaxial The high flexibility 15than Plus70%. isasanwell extremely low-loss 50 Ohm coon compression asthe application a is precoating fmax... 8 GHz ation. 10 sets stards among flexible coaxial s. ranteed results by a 7-wire Hybrid inner conductor with axial for an operation range up to 8aluminium GHz. Most modern in low losses good impedance matching. Further adthe flexibility 10 is further enhanced through the themethods include use double shielding PE-LLC which dielcore vantages welded shield. Use proprietary techniques, production the usage a low-loss use a stred, oxygen-free center conductor. Use is ectric constructed foil plus an additional tight continuous center conductor calibration compression with a overlapping gas proportion more than 70%as allow very proprietary techniques, continuous center conductor calibratiwoven braid. well as thefavourable application aasprecoating results in low losses on compression as loss well values. the application a precoating AThe screening efficiency >structure 90 dbadvantages @ 1 GHz is realized. The good impedance matching. Further the 15 Pluscopcombines innovative results in low losses good impedance matching. Further ad- per foil has an applied PE coating, which prevents foil cracking include use loss double shielding, which is constructed low characteristics 1/2 s with fixed inner vantagesthe the the include the use double shielding which due to short radius bends. The black PVC sheath 10 overlapping foilwith plus an additional woven conductors the mechanical attributes flexible, but is constructed overlapping foil plus antight additional tight is UV stabilized. In addition to a full compliment stard woven braid. stard-coaxial s with stred inner conbraid. high-loss connectors, an easy to use solder free N-connector has been A screening screening efficiency >> 90 dbdb @ represents 1@GHz is realized. The copa efficiency 90 110. GHz is an realized. The cop-only The ductor. Sothis ideal combination. specially developed for Connector installation per foil has an applied PE coating, which prevents foil cracking per foil has anaapplied PE coating, which prevents foil cracking 15 no Plus is guaranteed by 10 a 7-wire high flexibility takes few minutes requires special tools. due to short radius bends. The black PVC sheath 10 due to short bends. The black PVC sheath 10 welded conductor core is Hybrid theradius rightinner choice when a lowwith loss, aluminium highly flexible microwave is UV stabilized. In addition to a full compliment stard Plus is UV stabilized. In addition to a full compliment stan Using precise production steps, the inner conrated shield. is required. connectors, an easy to use solder free N-connector has been available fromsolder stock in the following stard dard connectors, anis easy use free N-connector has finally ductor10has to beto stred, compressed, calibrated specially developed for 10. Connector installation only drum sizes: 25 m, 50 m, 100 m, 0 m, 400 m 500 m. been specially developed 10 The the connector provided with a for precoating, to Plus. achieve excellent values takes a few minutes requires no special tools. 10 Outer diameter Ø... 10.2 mm Min. bending radius.. one single bending... 40 mm 15 repeated bendings... 80 mm Temperature range... storage...-70 to +85 C installation...-40 to +60 C operation...-55 to +85 C Electrical specifications 144 MHz... 5.0 00 MHz...6 0 MHz... 5.9 2400 MHz...22.9 300 MHz... 7.4 3000 MHz...26.0 432 MHz... 8.9 4000 MHz...30.7 500 MHz... 9.6 5000 MHz...35.1 800 MHz... 12.4 6000 MHz... 39.1 8000 MHz...46.6 Max. power hling (W @ 40 C) 10 MHz... 3860 3000 MHz...190 100 MHz... 1190 4000 MHz...160 500 MHz...510 5000 MHz...140 1000 MHz...350 6000 MHz...130 00 MHz...240 8000 MHz...1?? Typ. attenuation (db/100 m) @ C Impedance... 50 Improvements, compared to ECOFLEX 15 (stard): Capacity... 78 pf/m Exped frequency range: 6 GHz up to 8 GHz Velocity factor...0,85-7% @1 GHz fmax... 8 GHz - 11% @6 GHz Screening efficiency @ 1 GHz... > 90 db Higher power hling capacit + 9% @1 GHz DC-resistance: Centre conductor... 5.4 /km Reduced weight - 22% Outer conductor... 8.4 /km Considerable lower attenuation 1800 MHz...19.5 Weight... 103 g/m Pulling strength... 4 dan Remarkable electrical mechanical qualities! 100 MHz... 4.1 100 db 10 db Improved return loss Higher flexibility, even better to hle RF peak voltage... 1kV 1 db 0.1 db 30 installation only aa few minutes doesn t require any losstakes matching. is the rightfor choice when low loss, highly flexible microwave 100 1000 6000 Frequency (MHz) special tools. 10 Plus is the rightshielding: choice when a low Aisfurther Plus is the double an overlapping coprated required. loss, highly microwave is required. foil a braid above ensure a high shielding 10per isflexible available from stockrated in the following stard 10 Plus drum sizes: 25 m, 50 m, 100dB m, at 0 400 m 500 m. 10factor Plus is available from stock in the following stard > 90 1 m, GHz. The black PVC outer cover RG 3/U RG 58/U Capacity... 78 pf/m...101 pf/m.. 102 pf/m drum sizes: 25 m, 15 50 Plus m, 100 m, 0 m, 400For m,a 500 m. installation is UV-resistant. simplified we developed solderless connectors in the stards N, Velocity factor... 0.85... 0.66... 0.66 UHF 7-16DIN, which can be assembled in a short Attenuation (db/100 m) time without any special tools. Grounding clamp 10 Plus, part. no. 6810 Plusforis a modern coaxial for 15 all HF applica- tions: low-loss, flexible, stray radiation safe suitable up into the microwave range. Available in stard lengths 10 MHz... 1.3... 2.0... 5.0 Grounding clamp for 15 Plus, part. no. 6915 25 m, 50 m, 100 m, 0 m, 500 m 1000 m. 100 MHz... 4.1... 7.0....0 500 MHz... 9.6....0... 39.0 1000 MHz... 14.0...... 54.6 3000 MHz... 26.0... 58.5... 118 Typ. return loss -100 db - 5 db -15-10 db - -15 db -25 - db -30-25 db -35-30 db -35 db -40-400.0 db 0.0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.5 4.0 4.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 5.0Frequency 5.5 [GHz] 6.0 Frequency (GHz) Due to production tolerances the return loss may have different characteristics. Grounding clamp for 10 Plus, part. no. 6810 2 3
15 Plus 15 Plus Stred center conductor with aluminium core weldet shield Technical data Centre conductor...hybrid, aluminium core,... shield, 7 x 1.55 mm Centre conductor Ø...4.5 mm Dielectric... PE, low-loss compound Dielectric Ø... 11.3 mm Outer conductor 1... foil, PE-coated Shielding factor... 100 % Outer conductor 2... braid Shielding factor... 72 % Sheath... black heatex PVC, UV-resistant Outer diameter Ø... 14.6 mm Typ. attenuation (db/100 m @ C) 5 MHz... 0. 58 1000 MHz...9.1 10 MHz... 0.83 1296 MHz...10.5 50 MHz... 1.87 1500 MHz...11.4 100 MHz... 2.67 1800 MHz...12.6 144 MHz... 3.23 00 MHz...13.4 0 MHz... 3.83 2400 MHz...14.9 300 MHz... 4.75 3000 MHz...16.9 432 MHz... 5.8 4000 MHz...0 500 MHz... 6.2 5000 MHz...22.9 800 MHz... 8.0 6000 MHz...25.6 8000 MHz...30.5 15 Plus the innovative coaxial Cable the latest generation The new 15 Plus has remarkably improved specifications, electrical mechanical wise: 15 Plus takes advantage a high precision Hybrid inner conductor with aluminium core welded shield. 15 Plus is an extremely flexible low-loss 50 Ohm co- 15 Plus characteristics Diameter...14.6 mm Impedance... 50 Attenuation @ 1 GHz/100 m...9.1 db fmax... 8 GHz Weight...0 g/m Min. bending radius...one single bending... 70 mm 15 repeated bendings... 140 mm Temperature range...storage...-70 bis +85 C installation...-40 bis +60 C operation...-55 bis +85 C Pulling strength...10 dan Max. power hling (W @ 40 C) 10 MHz...6710 00 MHz...410 100 MHz...70 3000 MHz...330 500 MHz...890 4000 MHz...280 1000 MHz...610 6000 MHz...2 8000 MHz...180 axial for an operation range up to 8 GHz. Most modern production methods usage a low-loss PE-LLC dielectric with a gas proportion more than 70% allow very favourable loss values. The innovative structure 15 Plus combines the low loss characteristics 1/2 s with solid inner conductors with the mechanical attributes flexible, but high-loss stard coaxial s with stred inner conductor. So this represents an ideal combination. The high flexibility 15 Plus is guaranteed by a 7-wire Hybrid inner conductor with aluminium core welded shield. Using precise production steps, the inner conductor has to be stred, compressed, calibrated finally provided with a precoating, to achieve the excellent values for loss matching. Remarkable electrical mechanical qualities! Improvements, compared to ECOFLEX 15 (stard): Exped frequency range: 6 GHz up to 8 GHz Considerable lower attenuation - 7% @1 GHz - 11% @6 GHz Improved return loss Higher power hling capacit + 9% @1 GHz Reduced weight - 22% Higher flexibility, even better to hle Electrical specifications Impedance... 50 Capacity... 77 pf/m Velocity factor...0.86 fmax... 8 GHz Screening efficiency @ 1 GHz... > 90 db DC-resistance: Centre conductor... 2.2 /km Outer conductor... 5.15 /km RF peak voltage... 1.55 kv Typ. attenuation (db/100 m) @ C 100 db 10 db 1 db 0.1 db 10 100 1000 10000 Frequency (MHz) A further Plus is the double shielding: an overlapping foil a braid above ensure a high shielding factor > 90 db at 1 GHz. The black PVC outer cover @15 Plus is UV-resistant. For a simplified installation we developed solderless connectors in the stards N, UHF 7-16DIN, which can be assembled in a short time without any special tools. 15 Plus is a modern coaxial for all HF applications: low-loss, flexible, stray radiation safe suitable up into the microwave range. Available in stard lengths 25 m, 50 m, 100 m, 0 m, 500 m, 1000 m. Grounding clamp for 15 Plus, p art. no. 6915 15 Plus RG 3/U RG 58/U Capacity... 77 pf/m... 101 pf/m...102 pf/m Velocity factor...0.86...0.66... 0.66 Attenuation (db/100 m) 10 MHz...0.83... 2.0... 5.0 100 MHz...2.67... 7.0....0 500 MHz...6. 2.... 0... 39.0 1000 MHz...9.1...... 54.6 3000 MHz...16.9... 58.5...118 Typ. return loss -10 db -15 db - db -25 db -30 db -35 db -40 db 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 Frequency (GHz) Due to production tolerances the return loss may have different characteristics. 4 5
10 Plus HEATEX Centre conductor...... Hybrid, aluminium core 7 x 1.0 mm 5 MHz... 0.9 1000 MHz...14.0 Centre conductor Ø... 2.85 mm 10 MHz... 1.3 1296 MHz...16.2 weldet shield Dielectric... PE, low-loss compound 50 MHz... 2.85 1500 MHz...6 Ecl 15 Plus - the innovative Coaxial Cable the latest generation 10 Plus-HEATEX is predestined for operation in builcombines excellent HF characteristics dings, ships applications in fire-endangered areas. The UV 15 Plus characteristics with all protection requirements 15 Plus has remarkably improved specificathefire new stabilisation Diameter the robust HEATEX coats also allows an unli- mm...14.6 mechanical-wise: 15 Plus takes Very tions, lowelectricallongitudinal attenuation mited outdoor use. Impedance... 50 advantage a high-precision-hybrid inner conductor with Attenuation @ 1 GHz/100 m...9.1 db Highaluminium flexibility core welded shield. 10 Plus-Heatex is hardly inflammable fers a 8 GHz fmax... 15 Plus is an extremely flexible low-loss 50 Ohm co Halogen-free low fire propagation. axial for an operation range up to 8 GHz. Most modern Heatex coats are halogen-free, low-smoke include no Complies with all relevant fire production methods usage a low-loss PE-LLC dielreaction-friendly elements like fluorine, chlorine bromine. protection ectric withdems a gas proportion more than 70% allow very In comparison, stard coaxialelectrical s with PVC coatsmechanical (polyviremarkable favourable loss values. nyl chloride) are not halogen-free hence must not be used qualities! The innovative structure 15 Plus combines The new 10 Plus-Heatex comes with an innovative in fire-hazardeous areas. A critical point PVC s is their the low loss characteristics 1/2 s with fixed inner design, which again improves the good HF characterispropagation flames in case fire a danger that is safely conductors with the mechanical attributes flexible, but Improvements, compared to ECOFLEX 15 (stard): tics the ECOFLEX 10 stard. eliminated by 10 Plus-Heatex! high-loss stard-coaxial s with stred inner conexped frequency range: 6 GHz up to 8 GHz 10 Plus-Heatex uses a high precision Hybrid inner ductor. So this represents an ideal combination. The Considerable lower attenuation - 7% @1 GHz conductor, made seven single aluminium core wires with Available stard lengths 25 m, 50 m, 100 m, 0 m, 500 m. high flexibility 15 Plus is guaranteed by a 7-wire - 11% @6 GHz welded OFC coat. The surface finish the corres 10 Plus-Heatex complies with the following Hybrid inner conductor with aluminium core welded Improved return loss ponding HF characteristics this inner conductor are signinorms: shield. Using precise production steps, the inner conhigher power hling capacit + 9% @1 GHz ficantly better than conventional stred wire. The (Further information regarding tests at www.ssb.de) ductor has to be stred, compressed, calibrated finally Reduced weight - 22% result is impressive: provided with a precoating, to achieve the excellent values Higher flexibility, even better to hle Fire behaviour Significantly lower longitudinal EN 50265-2-1 IEC 60332-1 A further Plus is the double shielding: an overlapping cop attenuation: 5.8% at 6 GHz per foil a braid above ensure a high shieldingdin 5510-2 factor > 90 db at 1 GHz. The black PVC outer cover Cable bundle test Lower weight: 33% 15 Plus is UV-resistant. For a simplified installation IEC 60332-3-24 Usable frequency range extended we developed solderless connectors in the stards N, to 8 GHz UHF 7-16DIN, which can be assembled in a shortsmoke density time without any special tools. IEC 61034-1+2EN 50268 Excellent flexibility Dielectric Ø... 7.25 mm Outer conductor 1... foil, PE-coated Shielding factor... 100 % Outer conductor 2... braid Shielding factor... 72 % Sheath... black heatex PVC, UV-resistant Outer diameter Ø... 10.2 mm 100 MHz... 4.1 1800 MHz...19.5 144 MHz... 5.0 00 MHz...6 0 MHz... 5.9 2400 MHz...22.9 300 MHz... 7.4 3000 MHz...26.0 432 MHz... 8.9 4000 MHz...30.7 500 MHz... 9.6 5000 MHz...35.1 800 MHz... 12.4 6000 MHz... 39.1 8000 MHz...46.6 Weight... 103 g/m Min. bending radius.. one single bending... 40 mm 15 repeated bendings... 80 mm Temperature range... storage...-70 to +85 C installation...-40 to +60 C operation...-55 to +85 C Pulling strength... 4 dan Electrical specifications Max. power hling (W @ 40 C) 10 MHz... 3860 3000 MHz...190 100 MHz... 1190 4000 MHz...160 500 MHz...510 5000 MHz...140 1000 MHz...350 6000 MHz...130 00 MHz...240 8000 MHz...1?? Typ. attenuation (db/100 m) @ C Impedance... 50 100 db Capacity... 78 pf/m Velocity factor...0,85 10 db fmax... 8 GHz Screening efficiency @ 1 GHz... > 90 db DC-resistance: Centre conductor... 5.4 /km Outer conductor... 8.4 /km RF peak voltage... 1kV 1 db 0.1 db 30 100 1000 6000 Frequency (MHz) for loss matching. 15 Plus is a modern coaxial for all HF applicagrounding clamp for Corrosiveness combustible Gases A further plus is the double shielding: an overlapping tions: low-loss, flexible, stray radiation safe suitable up 15 Plus, part. no. 6915 foil an overlying braid guarantee a high shielding HD 602-1 EN 50267-2-3 IEC 60754-2 into the microwave range. Available in stard lengths factor >90 db@1 GHz. 25 m, 50 m, 100 m, 0 m, 500 m 1000 m. 6 Typ. attenuation (db/100 m @ C) with aluminium core ex 10 Plus H eatex Technical data Stred center conductor 10 Plus RG 3/U RG 58/U Capacity... 78 pf/m...101 pf/m.. 102 pf/m Velocity factor... 0.85... 0.66... 0.66 Attenuation (db/100 m) 10 MHz... 1.3... 2.0... 5.0 100 MHz... 4.1... 7.0....0 500 MHz... 9.6....0... 39.0 1000 MHz... 14.0...... 54.6 3000 MHz... 26.0... 58.5... 118 Typ. return loss -100 db - 5 db -15-10 db - -15 db -25 - db -30-25 db -35-30 db -35 db -40-400.0 db 0.0 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 2.5 2.5 3.0 3.5 4.0 4.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 5.0Frequency 5.5 [GHz] 6.0 Frequency (GHz) Due to production tolerances the return loss may have different characteristics. 7
15 Plus HEATEX Technical data Typ. attenuation (db/100 m @ C) 15 Plus Heatex Stred center conductor with aluminium core weldet shield Centre conductor...hybrid, aluminium core,... shield, 7 x 1.55 mm Centre conductor Ø...4.5 mm Dielectric... PE, low-loss compound Dielectric Ø... 11.3 mm Outer conductor 1... foil, PE-coated Shielding factor... 100 % Outer conductor 2... braid Shielding factor... 72 % Sheath... black heatex PVC, UV-resistant Outer diameter Ø... 14.6 mm 5 MHz... 0. 58 10 MHz... 0.83 50 MHz... 1.87 100 MHz... 2.67 144 MHz... 3.23 0 MHz... 3.83 300 MHz... 4.75 432 MHz... 5.8 500 MHz... 6.2 800 MHz... 8.0 1000 MHz...9.1 1296 MHz...10.5 1500 MHz...11.4 1800 MHz...12.6 00 MHz...13.4 2400 MHz...14.9 3000 MHz...16.9 4000 MHz...0 5000 MHz...22.9 6000 MHz...25.6 8000 MHz...30.5 Combines excellent HF characteristics with all fire protection requirements Very low longitudinal attenuation High flexibility Halogen-free 15 Plus-HEATEX is predestined for operation in buildings, ships applications in fire-endangered areas. The UV stabilisation the robust HEATEX coats also allows an unlimited outdoor use. 15 Plus-Heatex is hardly inflammable fers a low fire propagation. Weight...0 1 g/m Min. bending radius...one single bending... 70 mm 15 repeated bendings... 140 mm Temperature range...storage...-70 bis +85 C installation...-40 bis +60 C operation...-55 bis +85 C Pulling strength...10 dan Max. power hling (W @ 40 C) 10 MHz...6710 00 MHz...410 100 MHz...70 3000 MHz...330 500 MHz...890 4000 MHz...280 1000 MHz...610 6000 MHz...2 8000 MHz...180 Complies with all relevant fire protection dems The new 15 Plus-Heatex comes with an innovative design which again improves the good HF characteristics the ECOFLEX 15 stard. 15 Plus-Heatex uses a high precision Hybrid inner Heatex coats are halogen-free, low-smoke include no reaction-friendly elements like fluorine, chlorine bromine. In comparison, stard coaxial s with PVC coats (polyvinyl chloride) are not halogen-free hence must not be used in fire-hazardeous areas. A critical point PVC s is their propagation flames in case fire a danger that is safely eliminated by 15 Plus-Heatex! Electrical specifications Impedance... 50 Capacity... 77 pf/m Velocity factor...0.86 fmax... 8 GHz Screening efficiency @ 1 GHz... > 90 db Typ. attenuation (db/100 m) @ C 100 db 10 db conductor, made seven single aluminium core wires with welded OFC coat. The surface finish the corresponding HF characteristics this inner conductor are significantly better than conventional stred wire. The result is impressive: Significantly lower longitudinal attenuation: 11% at 6 GHz Lower weight: 22% Usable frequency range extended to 8 GHz Excellent flexibility A further plus is the double shielding: an overlapping foil an overlying braid guarantee a high shielding factor >90 db@1 GHz. Available stard lengths 25 m, 50 m, 100 m, 0 m, 500 m. 15 Plus-Heatex complies with the following norms: (Further information regarding tests at www.ssb.de) Fire behaviour EN 50265-2-1 IEC 60332-1 DIN 5510-2 Cable bundle test IEC 60332-3-24 Smoke density IEC 61034-1+2EN 50268 Corrosiveness combustible Gases HD 602-1 EN 50267-2-3 IEC 60754-2 DC-resistance: Centre conductor... 2.2 /km Outer conductor... 5.15 /km RF peak voltage... 1.55 kv 15 Plus RG 3/U RG 58/U Capacity... 77 pf/m... 101 pf/m...102 pf/m Velocity factor...0.86...0.66... 0.66 Attenuation (db/100 m) 10 MHz...0.83... 2.0... 5.0 100 MHz...2.67... 7.0....0 500 MHz...6. 2.... 0... 39.0 1000 MHz...9.1...... 54.6 3000 MHz...16.9... 58.5...118 1 db 0.1 db 10 100 1000 10000 Frequency (MHz) Typ. return loss -10 db -15 db - db -25 db -30 db -35 db -40 db 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 Frequency (GHz) Due to production tolerances the return loss may have different characteristics. 8 9
Coaxial connectors for 15 Plus Coaxial connectors for 10 Plus 14.3 19.5 22 32.5 16.6 23.7 58 50.8 ~59.6 52.5 ~50 42.7 32 ~48 41.7 29 SW=24 N-Connector, male, Part.-No. 7367 BNC-Connector, male, Part.-No. 7379 N-Connector, male, Part.-No. 7395 7-16DIN-Connector, male, Part.-No. 7398 49.3 ~50.3 15.1 15.7 51.5 15 15.6 19.5 SW=24 N-Connector, female, Part.-No. 7364 TNC-Connector, male, Part.-No. 7382 N-Connector, female, Part.-No. 7397 7-16DIN-Connector, female, Part.-No. 7349 ~50 42 49.4 M29 24 ~53.5 46.4 ~58.6 42 43 ~54.5 47.5 42.9.8 15.2 13.6 23.8 15.5 29 N-Connector, solderless for 10, Part.-No. 7383 TNC-Connector, male, Reverse Polarity, Part.-No. 7384 UHF-Connector, pr., Part.-No. 7350 ~45.3 38 19.5 14.5 33 N-Right Angle Connector, Part.-No. 7360 UHF-Connector, male, Part.-No. 7378.5 7.8 9.65 10 46 39.5 ~46 38.7 23 14 27 44.5 51.6 SW=8 BNC-Connector, female, Part.-No. 7386 SMA-Connector, Part.-No. 7362 SW=16 SW=16 11
Coaxial connectors for 10/15 Plus Heatex Adaptors N-Stard ~48 51.5 15.7 19.5 23.7 N-Connector, female, Heatex, for 10 Plus Heatex,, for 15 Plus Heatex, 58 50.8 ~50.3 32 15.6 19.5 22 29 N-male () - N-female, Part.-No. 8711 Reverse Polarity 43 SW=24, for 10 Plus Heatex, 7-16DIN-Connector, male, Heatex, for 15 Plus Heatex, N-female - female, Part.-No. 8722 N-male - BNC-female, Part.-No. 8700 N-Right Angle Adaptor 90, Part.-No. 87 N-female - BNC-male, Part.-No. 8701 N - T-Adaptor, Part.-No. 87 N-male - TNC-female, Part.-No. 8706 N-flange female - female, Part.-No. 8724 N-female - TNC-male, Part.-No. 8707 Part.-No. 7353, Part.-No. 7361, ~53.5 46.4 ~59.6 52.5 16.6, for 15 Plus Heatex, Part.-No. 7351, M29 32.5 N-Connector, male, Heatex N-male - male, Part.-No. 8723 Part.-No. 7352, Part.-No. 7368, N-Connector, female, Heatex ~58.6 41.7 N-Connector, male, Heatex SW=24 7-16DIN-Connector, female, Heatex, for 15 Plus Heatex, Part.-No. 7354, Heatex Connectors feature a highly corrosive resistant non-magnetic finish with the conductivity characteristics silver. 12 13
Adaptors N-Stard Adaptors BNC-Stard N-male - SMA-female, Part.-No. 8704 BNC-male - male, Part.-No. 8739 BNC-female - N-male, Part.-No. 8700 N-female - SMA-male, Part.-No. 8705 BNC-female - female, Part.-No. 8738 BNC-male - UHF-female, Part.-No. 8730 BNC-Right Angle Adaptor 90, Part.-No. 8736 BNC-female - UHF-male, Part.-No. 8731 N-male - 7-16DIN female, Part.-No. 8708 BNC - T-Adaptor, Part.-No. 8737 BNC-male - SMA-female, Part.-No. 8732 N-female - 7-16DIN male, Part.-No. 8709 BNC-male - N-female, Part.-No. 8701 BNC-female - SMA-male, Part.-No. 8733 N-female - TNC-male (), Part.-No. 8710 Reverse Polarity N-male - UHF-female, Part.-No. 8702 N-female - UHF-male, Part.-No. 8703 N-female - SMA-male (), Part.-No. 8762 Reverse Polarity 14 15
TNC-Stard Adaptors UHF-Stard BNC-male - TNC-female, Part.-No. 8734 TNC-male - N-female, Part.-No. 8707 UHF-male - male, Part.-No. 8782 UHF-male - BNC-female, Part.-No. 8731 BNC-female - TNC-male, Part.-No. 8735 TNC-female - N-male, Part.-No. 8706 UHF-female - female, Part.-No. 8781 UHF-female - BNC-male, Part.-No. 8730 TNC-male - BNC-female, Part.-No. 8735 UHF - Right Angle Adap. 90, Part.-No. 8780 TNC-female - BNC-male, Part.-No. 8734 UHF-male - N-female, Part.-No. 8703 TNC-male () - N-female, Part.-No. 8710 UHF-female - N-male, Part.-No. 8702 Reverse Polarity 16
Adaptors SMA-Stard Adaptors 7-16DIN-Stard SMA-male - male, Part.-No. 8761 SMA-male - BNC-female, Part.-No. 8733 7-16DIN female - female, Part.-No. 8770 SMA female - female, Part.-No. 8760 SMA-female - BNC-male, Part.-No. 8732 7-16DIN male - male, Part.-No. 8771 SMA-male - N-female, Part.-No. 8705 7-16DIN female - N-male, Part.-No. 8708 SMA-female - N-male, Part.-No. 8704 7-16DIN male - N-female, Part.-No. 8709 SMA-male () - N-female, Part.-No. 8762 Reverse Polarity 18 19