Thanks for shopping with Improvements! Space-Saving Wall-Mount Drying Rack - Small Item #504668 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver (not included) Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the wood surfaces. Wait to dispose of the packing material until assembly is complete and all parts and hardware are accounted for. Two people might be required for assembly. To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1017 If you have questions regarding this product, call 1-800-642-2112 Mon.-Fri. 9:00-5:00 EST (Ohio) and ask for our product specialists, or e-mail: productspecialist@improvementscatalog.com See many more products on the Internet! www.improvementscatalog.com Wall-Mount Drying Rack- Small #504668 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 1 of 8
Parts List: 1. Back Qty: 1 2. Frame Qty: 1 3. Left Side Qty: 1 4. Right Side Qty: 1 5. Top & Bottom Qty: 2 6. Brace Qty: 1 Hardware List: A. Cam Pin Qty: 8 B. Cam Lock Qty: 8 C. Dowel Qty: 12 D. Metal Hook Qty: 6 E. Metal Bracket Qty: 2 F. Small Screw Qty: 12 G. Medium Screw Qty: 4 H. Safety Strap Qty: 2 I. Pin Qty: 2 J. Large Screw Qty: 2 K. Wall Anchor Qty: 2 L. Pad Qty: 6 M. Extra Small Screw Qty: 4 N. Flat Washer Qty: 4 Wall-Mount Drying Rack- Small #504668 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 2 of 8
To use Cam Locks - 1. Screw in Cam Pin until snug 2. Set boards together 3. Insert Cam Lock 4. Turn Cam Lock clockwise (half a turn) Do not overtighten Note arrow direction If it won t turn halfway, back out the Cam Pin ¼ turn and try Cam Lock again. Assembly Tips Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the parts. Lay out all parts and hardware on the floor or on a table in the order of their number or letter. This will familiarize you with the parts and also help you find a part when you re ready to assemble it. Usually there is a small sticker on the part with the designating letter or number that matches the letter or number in the instructions. If that sticker is missing, look at the drawing in the instruction parts list, and try to recognize the part by its shape or characteristics like holes or grooves. We have provided both text and a drawing in each step, so using both will help the most. Each step assembles only a few parts, so just take it one step at a time. To assemble: Step 1 Use twelve Small Screws (F) to attach six Metal Hooks (D) to the Back (1). D 6 F 12 Wall-Mount Drying Rack- Small #504668 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 3 of 8
Step 2 Use two Metal Brackets (E) and four Medium Screws (G) to attach the Brace (6) to the Frame (2). E 2 G 4 Step 3 Insert two Cam Pins (A) and three Dowels (C) into the holes on the Left Side (3). Use two Cam Locks (B) to secure the Back (1) to the Left Side. A 2 B 2 C 3 Wall-Mount Drying Rack- Small #504668 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 4 of 8
Step 4 Insert two Pins (I) into the sides of the Frame (2) and set the Frame on the Left Side (3) so the pin enters the hole in the Side as shown. I 2 Step 5 Repeat Step 3 to attach the Right Side (4). A 2 B 2 C 3 Wall-Mount Drying Rack- Small #504668 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 5 of 8
Step 6 Insert two Cam Pins (A) and three Dowels (C) into the holes on the Bottom (5). Use two Cam Locks (B) to secure the Back and Sides to the Bottom. A 2 B 2 C 3 Step 7 Repeat Step 5 to attach the Top (5). A 2 B 2 C 3 Wall-Mount Drying Rack- Small #504668 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 6 of 8
Step 8 Use four Extra Small Screws (M) and four Flat Washers (N) to attach the two Safety Straps (H) to the Back (1) and the Frame (2). Place six adhesive Pads (L) on the front side of each Metal Hook (D). M 4 N 4 H 2 L 6 Step 9 The Metal Bar (6) fits securely into each Metal Hook (D) to hold the Frame at the desired angle. To attach to your wall: Hold the Drying Rack against the wall in the desired position. If possible, it is recommended to have at least one of the Screws screwed directly into a stud. Have another person use a pencil to mark the position of the hanging holes on the wall. Remove the Drying Rack from the wall. Make holes at the marks on the wall that are slightly smaller than the diameter of the Anchors (K). Insert the Wall Anchors (K) into the holes. Use two Large Screws (J) to attach the Back to the wall. Make sure the Screws go into the Wall Anchors. It is helpful to use the tip of the Screw to find the Anchor. (Note: If you can find the center of a stud in the wall, an Anchor is not needed.) J 2 K 2 Wall-Mount Drying Rack- Small #504668 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 7 of 8
Step 10 Set the drying rack in the desired position. Closed Slightly open Middle Most open Caution: Do not hang more than 9 lbs. on the Frame. Be watchful of fingers when closing the Frame. Wall-Mount Drying Rack- Small #504668 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 8 of 8