Exova Warringtonapt Key Industrial Park Fernside Road Willenhall West Midlands WV13 3YA T : +44 (0) 1902 722 122 F : +44 (0) 1902 727 242 E : willenhall@exova.com W: www.exova.com Report No: 191795 Test of: Securestyle Ltd Aluminium top and side hung windows And PVC-U top and side hung window Tested to: BS 6375-2:2009 Performance of windows & doors Part 2: Operation & strength Securestyle Ltd Kingsmeand Industrial Estate Princess Elizabeth Way Cheltenham Gloucestershire GL51 7RE
WINDOWS TO BS6375-2:2009 Page 2 of 33 TEST CONCLUSIONS Samples of: Manufacturer Securistyle Ltd Product Aluminium top and side hung window and PVC-U top and side hung window Model Aluminium top and side hung window and PVC-U top and side hung window have been tested in accordance with: BS 6375-2:2009 By Exova Warrington APT, a UKAS accredited Testing Laboratory (No. 0621) and EC Notified Body number (No, 1104) At Key Industrial Park, Fernside Rd., Willenhall. West Midlands. WV13 3YA. Results and comments as detailed below: Clause No. Description Compliance Aluminium Windows 5.3 Load bearing capacity of safety devices 350N (Side Hung) Yes 5.3 Load bearing capacity of safety devices 350N (Top Hung) Yes PVC-U Windows 5.3 Load bearing capacity of safety devices 350N (Side Hung) Yes 5.3 Load bearing capacity of safety devices 350N (Top Hung) Yes No inferences can be made regarding performance against other requirements of this standard Tests marked N/A are not applicable to the sample under test. Tests marked N/T were not applied to the sample under test
WINDOWS TO BS6375-2:2009 Page 3 of 33 AUTHORISATION Tests performed by: Chris Bryan, Laboratory Technician Report issued by: Chris Bryan, Laboratory Technician Signed Date 13/05/2010 For and on behalf of Exova Warrington APT Report authorised by: Ian Keeling, Operations Manager Signed Date 13/05/2010 For and on behalf of Exova Warrington APT Report issued: 13 May 2010 NOTE. Tests marked "Not UKAS Accredited are not covered by the Laboratory UKAS accreditation schedule. Tests marked NT were not tested Tests marked NA are not applicable to the product on test. The laboratory has tested the product supplied by the client as sampled in accordance with their own requirements Exova Warringtonapt is an EC Notified Body Number 1104 This report shall not be reproduced except in full, (and then only as permitted by copyright laws), without written approval from Exova warringtonapt
WINDOWS TO BS6375-2:2009 Page 4 of 33 CONTENTS PAGE NO. TEST CONCLUSIONS...2 AUTHORISATION...3 TEST DETAILS...5 TEST PROCEDURE...6 INITIAL OBSERVATIONS...7 PERFORMANCE CRITERIA & TEST RESULTS...8 CONCLUSIONS...11 LIMITATIONS...11 Appendix...12 PVC-U SIDE HUNG TEST SPECIMEN...13 PVC-U SIDE HUNG SCHEDULE OF COMPONENTS...16 PVC-U TOP HUNG TEST SPECIMEN...19 PVC-U TOP HUNG SCHEDULE OF COMPONENTS...22 ALUMINIUM SIDE HUNG TEST SPECIMEN...24 ALUMINIUM SIDE HUNG SCHEDULE OF COMPONENTS...27 ALUMINIUM TOP HUNG TEST SPECIMEN...29 ALUMINIUM TOP HUNG SCHEDULE OF COMPONENTS...32
WINDOWS TO BS6375-2:2009 Page 5 of 33 CLIENT DETAILS Company name Address Postcode Contact TEST DETAILS Securistyle Ltd Kingsmead Industrial Estate Princess Elizabeth Way Cheltenham Gloucestershire GL51 7RE Darren Kitchen ORDER DETAILS Order number 49140 Dated 22/03/2010 SAMPLE DETAILS Product Model Manufacturer Frame Dimensions Sash Dimensions Material Markings Date of Manufacture Other information Aluminium top and side hung window and PVC-U top and side hung window Aluminium top and side hung window and PVC-U top and side hung window Securistyle Ltd 650 x 1200 mm (Side Hung) 1200 x 1200 mm (Top Hung) 590 x 1140 mm (Side Hung) 1350 x 1350 mm (Top Hung) Aluminium and PVC-U None Unknown None TEST DETAILS Test specification BS 6375-2:2009 Full test Yes Test to clauses Test methods BS EN 14609:2004 safety devices Sample received 16/03/2010 Test started 22/03/2010 Test completed 22/03/2010 Special Test requirements Other reports to be used in conjunction with this report None None
WINDOWS TO BS6375-2:2009 Page 6 of 33 TEST PROCEDURE Introduction This test report should be read in conjunction with the Standard BS 6375-2:2009 Performance of windows and doors Part 2: Classification for operation and strength characteristics and guidance on selection & specification The specimens were judged on their ability to comply with the performance criteria as required in BS 6375-2:2009, with test methods BS EN 14609. Instruction To Test The test was conducted on the Monday 22 nd March 2010 on behalf of Securistyle Ltd. Initial requirement was as defined in BS 6375-2:2009, requiring a performance of threshold value of 350N for load-barring capacity of safety device. Test Specimen Construction Installation A description of the test construction is given in the Schedule of Components. The description is based on a detailed survey of the specimens and information supplied by the sponsor of the test. The sample was supplied mounted within a timber sub-frame of nominal section 75mm x 100mm fitted flush with the exterior face, in accordance with the clients fitting instructions. The sample was then installed into the test apparatus by a representative of Exova warringtonapt on the 22/03/2010. Test Climate The sample was conditioned in the laboratory in the range 10-30 C and 25-75% humidity. The temperature and humidity in the lab was maintained in the range 15.8-22.0 C and 32-54% humidity for the duration of the test.
WINDOWS TO BS6375-2:2009 Page 7 of 33 The external face of the sample INITIAL OBSERVATIONS
WINDOWS TO BS6375-2:2009 Page 8 of 33 PERFORMANCE CRITERIA & TEST RESULTS Clause Result Pass/Fail 4.8 Loadbearing capacity of safety devices (Aluminium Side hung window) Restrictor and Stile after test The safety device was engaged in the closing position, were a load of 350N was applied to the lower left restricted corner in the direction of opening. The restrictor was Un damaged and still operable after the test had been completed. Pass
WINDOWS TO BS6375-2:2009 Page 9 of 33 Clause Result Pass/Fail 4.8 Loadbearing capacity of safety devices (Aluminium Top hung window) Restrictor after Test The safety device was engaged in the closing position, were a load of 350N was applied to the lower left restricted corner in the direction of opening. The restrictor was Un damaged and still operable after the test had been completed. PASS 4.8 Loadbearing capacity of safety devices (PVC-U Side hung window) Restrictor after test The safety device was engaged in the closing position, were a load of 350N was applied to the lower left restricted corner in the direction of opening. The restrictor was Un damaged and still operable after the test had been completed. PASS
WINDOWS TO BS6375-2:2009 Page 10 of 33 Clause Result Pass/Fail 4.8 Loadbearing capacity of safety devices (PVC-U Top hung window) Restrictor after test The safety device was engaged in the closing position, were a load of 350N was applied to the lower left restricted corner in the direction of opening. The restrictor was Un damaged and still operable after the test had been completed. PASS
WINDOWS TO BS6375-2:2009 Page 11 of 33 Evaluation against objective Observations & comments CONCLUSIONS The sample as provided by the client was subjected to 5.3 Load Bearing safety devices in accordance with BS 6375-2 and achieved the requirements. All window types have fully passed the safety load test. Limitations Range of window assemblies covered by this report Uncertainty of Measurement LIMITATIONS The results relate only to the behaviour of the specimens of the element of construction under the particular conditions of test. They are not intended to be the sole criteria for assessing the potential performance of the element in use, nor do they reflect the actual behaviour in use. It is our opinion that the range of window assemblies covered by this report are limited to the following Assemblies with identical hardware fitted no further apart than in the tested assembly Assemblies of the same or smaller overall dimensions to the tested assembly The uncertainties of measurements calculated for a confidence level of 95% throughout these tests are within the limits of these tolerances. The standard specifies the following tolerances Forces: ±2% Distances: ±1mm for tape measures ± 0.01mm for dial gauges Times: ±5s
WINDOWS TO BS6375-2:2009 Page 12 of 33 PVC-U Side hung window specification PVC-U Top hung window specification Aluminium Side hung window specification Aluminium Top hung window specification Appendix
WINDOWS TO BS6375-2:2009 Page 13 of 33 PVC-U SIDE HUNG TEST SPECIMEN Figure 1- General Elevation of Window Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 14 of 33 Figure 2 Vertical cross section Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 15 of 33 Figure 3 Horizontal cross section Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 16 of 33 PVC-U SIDE HUNG SCHEDULE OF COMPONENTS (Refer to Figures 1 to ) (All values are nominal unless stated otherwise) (All other details are as stated by the sponsor) Item Description Window casement (s) Profile code : SK7723 Supplier : LB Plastics Material : PVC Corner fixing method type : Welded Reinforcement profile code : TL105/ FP8821 Window casement glass Supplier : Clayton Glass Thickness : 28 mm Overall size i. side hung sash : 474 x 1024 mm Nominal edge clearance : 6 mm Glazing beads Glazing method : Internally beaded Supplier : LB Plastics Profile code : SK7781 Material : PVC Overall size : Unknown. Cut to suite sash aperture Fixing method : Snap fit Window frame Supplier : LB Plastics Profile code : SK7702 Material : PVC Fixing jamb to head joints i. type : Welded Reinforcement i. profile code : FP8824
WINDOWS TO BS6375-2:2009 Page 17 of 33 Item Description Hinge type 1 Supplier : Securistyle Description : Defender 16 s/h restricted x 1 Reference : EDSR 16 Quantity : 1 Fixing hinge to sash i. type : Pan head PVC screw ii. size : 4.8 x 19 mm Fixing hinge to frame i. type : Pan head PVC screw ii. size : 4.8 x 19 mm Hinge type 2 Supplier : Securistyle Description : Defender 16 s/h x 1 Reference : EDS16 Quantity : 1 Fixing hinge to sash iii. type : Pan head PVC screw iv. size : 4.8 x 19 mm Fixing hinge to frame iii. type : Pan head PVC screw iv. size : 4.8 x 19 mm v. quantity : Lock Supplier : Securistyle Description : Defender Fixings i. type : Csk PVC screw ii. size : 4.3 x 252 mm Lock Keeps Supplier : Securistyle Description : Defender Reference : DLG 1100S Fixing keeps to frame i. type : Csk PVC Screw ii. size : 4.3 x 25 mm Lever handles Supplier : Trojan Description : Cranked casement handle Reference : Sparta Fixings i. type : M5 screws ii. size : M5 x 40 mm iii. quantity : 2
WINDOWS TO BS6375-2:2009 Page 18 of 33 Item Description Restrictor Supplier : Securistyle Description : Cavity restrictor Reference : RC1 Fixing restrictor to sash i. type : Csk PVC Screw ii. size : 4.3 x 25 mm Fixing restrictor to frame i. type : Csk PVC Screw ii. size : 4.3 x 25 mm
WINDOWS TO BS6375-2:2009 Page 19 of 33 PVC-U TOP HUNG TEST SPECIMEN Figure 1- General Elevation of Window Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 20 of 33 Figure 2 Vertical cross section Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 21 of 33 Figure 3 Horizontal cross section Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 22 of 33 PVC-U TOP HUNG SCHEDULE OF COMPONENTS (Refer to Figures 1 to ) (All values are nominal unless stated otherwise) (All other details are as stated by the sponsor) Item Description Window casement (s) Profile code : SK7723 Supplier : LB Plastics Material : PVC Corner fixing method i. type : Welded Reinforcement i. profile code : TL105 Window casement glass Supplier : Clayton glass Thickness : 28 mm Overall size ii. top hung sash : 1024 x 1021 mm Nominal edge clearance : 6 mm Glazing beads Glazing method : Internally beaded Supplier : LB Plastics Profile code : SK7781 Material : PVC Overall size : Unknown. Cut to suite sash aperture Fixing method : Snap fit Window frame Supplier : LB Plastics Profile code : SK7702 Material : PVC Fixing jamb to head joints ii. type : Welded Reinforcement ii. profile code : FP8824
WINDOWS TO BS6375-2:2009 Page 23 of 33 Item Description Hinge type Supplier : Securistyle Description : Defender 24 restricted Reference : EDT24H6 Quantity : 2 Fixing hinge to sash v. type : Pan head PVC screw vi. size : 3.9 x 254 mm Fixing hinge to frame vi. type : Pan head PVC screw vii. size : 4.8 x 25 mm Lock Supplier : Securistyle Description : Defender Fixings iii. type : Csk PVC screw iv. size : 4.3 x 252 mm Lock Keeps Supplier : Securistyle Description : Defender Reference : R90004 Fixing keeps to frame iii. type : Csk PVC Screw iv. size : 4.3 x 25 mm Lever handles Supplier : Trojan Description : Cranked casement handle Reference : Sparta Fixings iv. type : M5 screws v. size : M5 x 40 mm vi. quantity : 2 Restrictor Supplier : Securistyle Description : Cavity restrictor Reference : RC1 Fixing restrictor to sash iii. type : Csk PVC Screw iv. size : 4.8 x 25 mm Fixing restrictor to frame iii. type : Csk PVC Screw iv. size : 4.8 x 25 mm
WINDOWS TO BS6375-2:2009 Page 24 of 33 ALUMINIUM SIDE HUNG TEST SPECIMEN Figure 1- General Elevation of Window Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 25 of 33 Figure 2 Vertical cross section Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 26 of 33 Figure 3 Horizontal cross section Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 27 of 33 ALUMINIUM SIDE HUNG SCHEDULE OF COMPONENTS (Refer to Figures 1 to ) (All values are nominal unless stated otherwise) (All other details are as stated by the sponsor) Item Description Window frame Supplier : Sapa Description : Dualframe 75 Profile code : DF310 Material : Aluminium Fixing jamb to head joints : iii. type : Welded Window casement (s) Supplier : Sapa Profile codes : DF333 Material : Aluminium Corner fixing method ii. type : Welded Window casement glass Supplier : Clayton glass Thickness : 24 mm Overall size iii. side hung sash : 607 x 1057 mm Nominal edge clearance : 6 mm Glazing beads Glazing method : Internally beaded Supplier : Sapa Profile code : DF104 Material : Aluminium Overall size : Unknown. Cut to suite sash aperture Fixing method : Push fit Hinges type 1 Supplier : Securistyle Description : Defender 16 s/h restricted Reference : EDSR16 Quantity : 1 Fixing hinge to sash vii. type : Pan head drill point viii. size : 3.9 x 12 mm Fixing hinge to frame viii. type : Pan head self tapper ix. size : No 8 x 19 mm
WINDOWS TO BS6375-2:2009 Page 28 of 33 Item Description Hinges type 2 Supplier : Securistyle Description : Defender 16 s/h Reference : EDS16 Quantity : 1 Fixing hinge to sash ix. type : Pan head drill point x. size : 3.9 x 12 mm Fixing hinge to frame x. type : Pan head self tapper xi. size : No 8 x 19 mm Lever handles Supplier : Laird Description : Cockspur Reference : Traditional Fixings vii. type : Csk self tapping viii. size : 8 x 3/8 mm
WINDOWS TO BS6375-2:2009 Page 29 of 33 ALUMINIUM TOP HUNG TEST SPECIMEN Figure 1- General Elevation of Window Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 30 of 33 Figure 2 Vertical cross section Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 31 of 33 Figure 3 Horizontal cross section Do not scale. All dimensions are in mm
WINDOWS TO BS6375-2:2009 Page 32 of 33 ALUMINIUM TOP HUNG SCHEDULE OF COMPONENTS (Refer to Figures 1 to ) (All values are nominal unless stated otherwise) (All other details are as stated by the sponsor) Item Description Window frame Supplier : Sapa Description : Dualframe 75 Profile code : DF310 Material : Aluminium Fixing jamb to head joints : iv. type : Welded Window casement (s) Supplier : Sapa Profile codes : DF333 Material : Aluminium Corner fixing method iii. type : Welded Window casement glass Supplier : Clayton glass Thickness : 24 mm Overall size iv. side hung sash : 1057 x 1057 mm Nominal edge clearance : 6 mm Glazing beads Glazing method : Internally beaded Supplier : Sapa Profile code : DF104 Material : Aluminium Overall size : Unknown. Cut to suite sash aperture Fixing method : Push fit Hinges type Supplier : Securistyle Description : Defender 24 restricted Reference : EDTR24 Quantity : 2 Fixing hinge to sash xi. type : Pan head drill point xii. size : 3.9 x 12 mm Fixing hinge to frame xii. type : Pan head self tapper xiii. size : No 8 x 19 mm
WINDOWS TO BS6375-2:2009 Page 33 of 33 Item Description Lever handles Supplier : Laird Description : Cockspur Reference : Traditional Fixings ix. type : Csk self tapping x. size : 8 x 3/8 mm END OF REPORT