In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Similar documents
PDTC143Z series. NPN resistor-equipped transistors; R1 = 4.7 k, R2 = 47 k

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PDTD1xxxU series. 500 ma, 50 V NPN resistor-equipped transistors

PEMH11; PUMH11. NPN/NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PDTB1xxxT series. 500 ma, 50 V PNP resistor-equipped transistors

PDTC143X/123J/143Z/114YQA series

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PEMB18; PUMB18. PNP/PNP resistor-equipped transistors; R1 = 4.7 k, R2 = 10 k

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PDTC143/114/124/144EQA series

BCP68; BC868; BC68PA

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Digital applications Cost-saving alternative to BC847/BC857 series in digital applications Control of IC inputs Switching loads

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

BCP56H series. 80 V, 1 A NPN medium power transistors

BCP53; BCX53; BC53PA

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

80 V, 1 A NPN medium power transistors. Type number Package PNP complement Nexperia JEITA JEDEC BCP56T SOT223 SC-73 - BCP53T

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

BC817-25QA; BC817-40QA

BCP55; BCX55; BC55PA

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

BC857xMB series. 45 V, 100 ma PNP general-purpose transistors

Low current peripheral driver Control of IC inputs Replaces general-purpose transistors in digital applications Mobile applications

BC857XQA series. 45 V, 100 ma PNP general-purpose transistors

BC817K series. 1 Product profile. 45 V, 500 ma NPN general-purpose transistors. 1.1 General description. 1.2 Features and benefits. 1.

45 V, 800 ma PNP general-purpose transistor. General-purpose switching and amplification. Symbol Parameter Conditions Min Typ Max Unit

BC817W series. 1 Product profile. 45 V, 500 ma NPN general-purpose transistors. 1.1 General description. 1.2 Features and benefits. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PEMD48; PUMD48. NPN/PNP resistor-equipped transistors; R1 = 47 kω, R2 = 47 kω and R1 = 2.2 kω, R2 = 47 kω

Single general-purpose switching transistor AEC-Q101 qualified. Switching and linear amplification. Symbol Parameter Conditions Min Typ Max Unit V CEO

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

65 V, 100 ma NPN general-purpose transistors

General-purpose switching and amplification Mobile applications

Leadless ultra small SMD plastic package Low package height of 0.37 mm Power dissipation comparable to SOT23 AEC-Q101 qualified

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PBHV9560Z. 1. General description. 2. Features and benefits. 3. Applications. Quick reference data

100 V, 4.1 A PNP low VCEsat (BISS) transistor

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

BC857QAS. 1. General description. 2. Features and benefits. 3. Applications. Quick reference data

General-purpose switching and amplification Mobile applications

BC847 series. 1 Product profile. 45 V, 100 ma NPN general-purpose transistors. 1.1 General description. 1.2 Features and benefits. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PNP general-purpose double transistor. PNP general-purpose double transistor in a small SOT143B Surface-Mounted Device (SMD) plastic package.

BCM857QAS. 1. General description. 2. Features and benefits. 3. Applications. 4. Quick reference data

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PBSS4112PANP. Load switch Battery-driven devices Power management Charging circuits Power switches (e.g. motors, fans)

PBSS4041PX. 1. Product profile. 60 V, 5 A PNP low V CEsat (BISS) transistor. 1.1 General description. 1.2 Features and benefits. 1.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Loadswitch Battery-driven devices Power management Charging circuits Power switches (e.g. motors, fans)

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

40 V, 0.5 A NPN low VCEsat (BISS) transistor

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

Low collector-emitter saturation voltage V CEsat High collector current capability High collector current gain h FE at high I C

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

BAT54W series. 1. Product profile. 2. Pinning information. Schottky barrier diodes. 1.1 General description. 1.2 Features and benefits

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

NPN/PNP low V CEsat Breakthrough In Small Signal (BISS) transistor in a SOT96-1 (SO8) medium power Surface-Mounted Device (SMD) plastic package.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

NPN/NPN low V CEsat Breakthrough In Small Signal (BISS) transistor in a SOT96-1 (SO8) medium power Surface-Mounted Device (SMD) plastic package.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

PHPT61003PY. 1. General description. 2. Features and benefits. 3. Applications. Quick reference data

50 ma LED driver in SOT457

NPN Darlington transistor in an SOT223 plastic package. PNP complement: BSP61

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

High-speed switching diodes. Type number Package Configuration Package Nexperia JEITA JEDEC

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

20 ma LED driver in SOT457

Load switch Battery-driven devices Power management Charging circuits Power switches (e.g. motors, fans)

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

30 V, 3 A NPN low VCEsat (BISS) transistor. Loadswitch Battery-driven devices Power management Charging circuits Power switches (e.g.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

NPN high power bipolar transistor in a SOT669 (LFPAK56) Surface-Mounted Device (SMD) power plastic package.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

BAV756S; BAW56 series

Single Schottky barrier diode

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.

RB521CS30L. 1. Product profile. 100 ma low V F MEGA Schottky barrier rectifier. 1.1 General description. 1.2 Features and benefits. 1.

Transcription:

Important notice Dear Customer, On 7 February 207 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS semiconductors with its focus on the automotive, industrial, computing, consumer and wearable application markets In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below. Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/, use http://www.nexperia.com Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use salesaddresses@nexperia.com (email) Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on the version, as shown below: - NXP N.V. (year). All rights reserved or Koninklijke Philips Electronics N.V. (year). All rights reserved Should be replaced with: - Nexperia B.V. (year). All rights reserved. If you have any questions related to the data sheet, please contact our nearest sales office via e-mail or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and understanding, Kind regards, Team Nexperia

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k Rev. 7 8 November 20 Product data sheet. Product profile. General description NPN Resistor-Equipped Transistor (RET) family in Surface-Mounted Device (SMD) plastic packages. Table. Product overview Type number Package PNP Package NXP JEITA JEDEC complement configuration PDTC4YE SOT46 SC-75 - PDTA4YE ultra small PDTC4YM SOT88 SC- - PDTA4YM leadless ultra small PDTC4YT SOT2 - TO-26AB PDTA4YT small PDTC4YU SOT2 SC-70 - PDTA4YU very small.2 Features and benefits 0 ma output current capability Reduces component count Built-in bias resistors Reduces pick and place costs Simplifies circuit design AEC-Q qualified. Applications Digital applications in automotive and industrial segments Control of IC inputs Switching loads.4 Quick reference data Cost-saving alternative for BC847/857 series in digital applications Table 2. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V CEO collector-emitter voltage open base - - 50 V I O output current - - 0 ma R bias resistor (input) 7 k R2/R bias resistor ratio.7 4.7 5.7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 2. Pinning information Table. Pinning Pin Description Simplified outline Graphic symbol SOT2; SOT2; SOT46 input (base) 2 GND (emitter) output (collector) R 2 006aaa44 R2 sym007 2 SOT88 input (base) 2 GND (emitter) output (collector) 2 Transparent top view R R2 2 sym007. Ordering information Table 4. Ordering information Type number Package Name Description Version PDTC4YE SC-75 plastic surface-mounted package; leads SOT46 PDTC4YM SC- leadless ultra small plastic package; solder lands; SOT88 body.0 0.6 0.5 mm PDTC4YT - plastic surface-mounted package; leads SOT2 PDTC4YU SC-70 plastic surface-mounted package; leads SOT2 4. Marking Table 5. Marking codes Type number Marking code [] PDTC4YE PDTC4YM DU PDTC4YT *27 PDTC4YU *0 [] * = placeholder for manufacturing site code PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 2 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 5. Limiting values Table 6. Limiting values In accordance with the Absolute Maximum Rating System (IEC 604). Symbol Parameter Conditions Min Max Unit V CBO collector-base voltage open emitter - 50 V V CEO collector-emitter voltage open base - 50 V V EBO emitter-base voltage open collector - 6 V V I input voltage positive - +40 V negative - 6 V I O output current - 0 ma I CM peak collector current single pulse; - 0 ma t p ms P tot total power dissipation T amb 25 C PDTC4YE (SOT46) [][2] - 50 mw PDTC4YM (SOT88) [2][] - 250 mw PDTC4YT (SOT2) [] - 250 mw PDTC4YU (SOT2) [] - 200 mw T j junction temperature - 50 C T amb ambient temperature 65 +50 C T stg storage temperature 65 +50 C [] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint. PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 00 006aac778 P tot (mw) 200 () (2) () 0 0-75 -25 25 75 25 75 T amb ( C) () SOT2; FR4 PCB, standard footprint SOT88; FR4 PCB with 70 m copper strip line, standard footprint (2) SOT2; FR4 PCB, standard footprint () SOT46; FR4 PCB, standard footprint Fig. Power derating curves 6. Thermal characteristics Table 7. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit R th(j-a) thermal resistance from junction to ambient in free air PDTC4YE (SOT46) [][2] - - 80 K/W PDTC4YM (SOT88) [2][] - - 500 K/W PDTC4YT (SOT2) [] - - 500 K/W PDTC4YU (SOT2) [] - - 625 K/W [] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [] Device mounted on an FR4 PCB with 70 m copper strip line, standard footprint. PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 4 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k Z th(j-a) (K/W) 2 duty cycle = 0.75 0.5 0. 0.2 0. 0.05 006aac78 0.02 0.0 0 - -5-4 - -2 2 t p (s) Fig 2. FR4 PCB, standard footprint Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC4YE (SOT46); typical values 006aac782 Z th(j-a) (K/W) 2 duty cycle = 0.75 0.5 0. 0.2 0. 0.05 0.02 0.0 0 - -5-4 - -2 2 t p (s) Fig. FR4 PCB, 70 m copper strip line Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC4YM (SOT88); typical values PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 5 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k Z th(j-a) (K/W) 2 duty cycle = 0.75 0.5 0. 0.2 006aac779 0. 0.02 0.05 0.0 0 - -5-4 - -2 2 t p (s) Fig 4. FR4 PCB, standard footprint Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC4YT (SOT2); typical values Zth(j-a) (K/W) 2 duty cycle = 0.75 0.5 0. 0.2 0. 0.05 006aac780 0.02 0.0 0 - -5-4 - -2 2 t p (s) Fig 5. FR4 PCB, standard footprint Transient thermal impedance from junction to ambient as a function of pulse duration for PDTC4YU (SOT2); typical values PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 6 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 7. Characteristics Table 8. Characteristics T amb =25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit I CBO collector-base cut-off V CB =50V; I E = 0 A - - 0 na current I CEO collector-emitter V CE =0V; I B =0A - - A cut-off current V CE =0V; I B =0A; - - 5 A T j = 50 C I EBO emitter-base cut-off V EB =5V; I C =0A - - 50 A current h FE DC current gain V CE =5V; I C = 5 ma 0 - - V CEsat collector-emitter I C =5mA; I B =0.25mA - - 0 mv saturation voltage V I(off) off-state input voltage V CE =5V; I C =0 A - 0.7 0.5 V V I(on) on-state input voltage V CE = 0. V; I C =ma.4 0.8 - V R bias resistor (input) 7 k R2/R bias resistor ratio.7 4.7 5.7 C c collector capacitance V CB =V; I E =i e =0A; - - 2.5 pf f=mhz f T transition frequency V CE =5V; I C =ma; f = 0 MHz [] - 20 - MHz [] Characteristics of built-in transistor 006aac784 006aac785 h FE 2 () (2) () V CEsat (V) - () (2) () - 2 I C (ma) V CE =5V () T amb = 0 C (2) T amb =25 C () T amb = 40 C Fig 6. DC current gain as a function of collector current; typical values -2-2 I C (ma) I C /I B =20 () T amb = 0 C (2) T amb =25 C () T amb = 40 C Fig 7. Collector-emitter saturation voltage as a function of collector current; typical values PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 7 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 006aac786 006aac787 V I(on) (V) V I(off) (V) () (2) () () (2) () Fig 8. - - 2 I C (ma) V CE =0.V () T amb = 40 C (2) T amb =25 C () T amb = 0 C On-state input voltage as a function of collector current; typical values Fig 9. - - I C (ma) V CE =5V () T amb = 40 C (2) T amb =25 C () T amb = 0 C Off-state input voltage as a function of collector current; typical values 006aac788 006aac757 C c (pf) 2 f T (MHz) 2 0 0 20 0 40 50 V CB (V) - 2 I C (ma) f=mhz; T amb =25 C V CE =5V; T amb =25 C Fig. Collector capacitance as a function of collector-base voltage; typical values Fig. Transition frequency as a function of collector current; typical values of built-in transistor PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 8 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 8. Test information 8. Quality information This product has been qualified in accordance with the Automotive Electronics Council (AEC) standard Q - Stress test qualification for discrete semiconductors, and is suitable for use in automotive applications. 9. Package outline.8.4 0.45 0.5 0.95 0.60 0.0 0.22 0.62 0.55 0.55 0.47 0.50 0.46.75.45 0.9 0.7 0.65.02 0.95 2 0.0 0.22 2 0.0 0.5 0.25 0. 04--04 0.20 0.2 0.5 0-04-0 Fig 2. Package outline PDTC4YE (SOT46/SC-75) Fig. Package outline PDTC4YM (SOT88/SC-).0 2.8. 0.9 2.2.8. 0.8 0.45 0.5 0.45 0.5 2.5 2..4.2 2.2 2.0.5.5 2 2.9 0.48 0.8 0.5 0.09. 0.4 0. 0.25 0. 04--04 04--04 Fig 4. Package outline PDTC4YT (SOT2) Fig 5. Package outline PDTC4YU (SOT2/SC-70) PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 9 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k. Packing information Table 9. Packing methods The indicated -xxx are the last three digits of the 2NC ordering code. [] Type number Package Description Packing quantity 000 5000 000 PDTC4YE SOT46 4 mm pitch, 8 mm tape and reel -5 - -5 PDTC4YM SOT88 2 mm pitch, 8 mm tape and reel - - -5 PDTC4YT SOT2 4 mm pitch, 8 mm tape and reel -25 - -25 PDTC4YU SOT2 4 mm pitch, 8 mm tape and reel -5 - -5 [] For further information and the availability of packing methods, see Section 4. PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k. Soldering 2.2.7 solder lands 0.85 0.5 ( ) 2 solder resist solder paste occupied area 0.6 ( ). sot46_fr Reflow soldering is the only recommended soldering method. Fig 6. Reflow soldering footprint PDTC4YE (SOT46/SC-75). 0.7 R0.05 (2 ) solder lands 0.9 0.6 0.7 solder resist 0.25 (2 ) solder paste occupied area 0. (2 ) 0.4 (2 ) 0. 0.4 sot88_fr Reflow soldering is the only recommended soldering method. Fig 7. Reflow soldering footprint PDTC4YM (SOT88/SC-) PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k. 2.9.9 solder lands.7 2 solder resist solder paste 0.7 ( ) 0.6 ( ) occupied area 0.5 ( ) 0.6 ( ) sot02_fr Fig 8. Reflow soldering footprint PDTC4YT (SOT2).2 (2 ) 2.2.4 (2 ) solder lands 4.6 2.6 solder resist occupied area.4 preferred transport direction during soldering 2.8 4.5 sot02_fw Fig 9. Wave soldering footprint PDTC4YT (SOT2) PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 2 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 2.65.85.25 solder lands 2 solder resist 2.5 0.6 ( ). solder paste 0.5 ( ) occupied area 0.55 ( ) sot2_fr Fig 20. Reflow soldering footprint PDTC4YU (SOT2/SC-70).425 ( ) 4.6 2.575 solder lands solder resist occupied area.65 2..8 09 (2 ) preferred transport direction during soldering sot2_fw Fig 2. Wave soldering footprint PDTC4YU (SOT2/SC-70) PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 2. Revision history Table. Revision history Document ID Release date Data sheet status Change notice Supersedes PDTC4Y_SER v.7 208 Product data sheet - PDTC4Y_SERIES v.6 Modifications: The format of this document has been redesigned to comply with the new identity guidelines of NXP Semiconductors. Legal texts have been adapted to the new company name where appropriate. Type numbers PDTC4YEF, PDTC4YK and PDTC4YS removed. Section Product profile : updated Section Ordering information : added Section 4 Marking : updated Figure to : added Section 5 Limiting values : updated Section 6 Thermal characteristics : updated Table 8 Characteristics : V i(on) redefined to V I(on) on-state input voltage, V i(off) redefined to V I(off) off-state input voltage, I CEO updated, f T added Section 8 Test information : added Section 9 Package outline : superseded by minimized package outline drawings Section Packing information : added Section Soldering : added Section Legal information : updated PDTC4Y_SERIES v.6 2004087 Product data sheet - PDTC4Y_SERIES v.5 PDTC4Y_SERIES v.5 200409 Product specification - PDTC4Y_SERIES v.4 PDTC4Y_SERIES v.4 200044 Product specification - - PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 4 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k. Legal information. Data sheet status Document status [][2] Product status [] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [] Please consult the most recently issued document before initiating or completing a design. [2] The term short data sheet is explained in section Definitions. [] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com..2 Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet.. Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer s own risk. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer s applications and products planned, as well as for the planned application and use of customer s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer s applications or products, or the application or use by customer s third party customer(s). Customer is responsible for doing all necessary testing for the customer s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer s third party customer(s). NXP does not accept any liability in this respect. Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 604) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 5 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding..4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 4. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com PDTC4Y_SER All information provided in this document is subject to legal disclaimers. NXP B.V. 20. All rights reserved. Product data sheet Rev. 7 8 November 20 6 of 7

PDTC4Y series NPN resistor-equipped transistors; R = k, R2 = 47 k 5. Contents Product profile........................... General description......................2 Features and benefits..................... Applications............................4 Quick reference data.................... 2 Pinning information...................... 2 Ordering information..................... 2 4 Marking................................ 2 5 Limiting values.......................... 6 Thermal characteristics.................. 4 7 Characteristics.......................... 7 8 Test information......................... 9 8. Quality information...................... 9 9 Package outline......................... 9 Packing information.................... Soldering............................. 2 Revision history........................ 4 Legal information....................... 5. Data sheet status...................... 5.2 Definitions............................ 5. Disclaimers........................... 5.4 Trademarks........................... 6 4 Contact information..................... 6 5 Contents.............................. 7 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section Legal information. NXP B.V. 20. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 8 November 20 Document identifier: PDTC4Y_SER

2024 © hobbydocbox.com Privacy Policy | Terms of Service | Feedback