Product Bulletin 5900 Release D, Effective April, 200 Black revision bar in the margin indicates a change Scotchcal Luminous Film 5900 Description Advantages Make rechargeable glow in the dark signs and markings Luminance recharges with recommended light source in three minutes (See Recharging Luminous Film on page.) Dimensionally stable, durable, multilayer film Excellent chemical and stain resistance Easily cleaned with common cleaning solutions Durable for short term exterior applications For use on flat or simple curved surfaces May be applied over or under the films listed in the Compatible Products No heavy metals or radioactive materials used in the manufacture of this product May be safely disposed of in a sanitary landfill or by incineration in an industrial, commercial, or municipal incinerator s and Uses M Scotchcal Luminous Film 5900 is intended for making permanent, durable graphics when used with the listed Compatible Products in the following applications. These applications are warranted by the M MCS Warranty: Primarily intended for making interior glow in the dark signs and markings, including: - Safety signage in buildings, ships, ferries, railroads - Identification signs and symbols - Labels - M Graphics for Floors when laminated with M Scotchcal Overlaminate Film 646 Limitations of End Uses The following uses and applications are specifically NOT warranted: s to surfaces subjected to gasoline spills or vapors to complex curved surfaces, corrugated surfaces, or riveted surfaces Graphics for floors installed in areas subjected to power floor cleaning equipment, forklift or pallet traffic Graphics made for automotive Original Equipment Manufacturers (OEM); contact M Automotive Division at -800-28-684, Ext. 444, for alternatives. It is the responsibility of the graphic manufacturer and/or the end user to comply with all local codes. Compatible Products M Scotchcal Films - Series 220 - Series 20 - Series 60 - ElectroCut Series 7725 M Scotchlite Reflective Sheeting - Series 280 - Series 580 - Series 680 Plus - Diamond Grade Series 970 M Controltac Plus Graphic Marking System 80 For screen printing: -M Scotchcal Screen Printing Ink Series 900, Series 900, Series 6600 I, and overprint clears from the same series For overlaminating: -M Scotchcal Overprint Protective Clear 8920 (ES) -M Scotchcal Electrostatic Protective Overlaminate - Luster 890 (ES) - Matte 89 (ES) - High Gloss, Graffiti Resistant 892 (ES) - Ultra Matte 895 (ES) For electrostatic imaging: -M Scotchprint Toner Series 8700/8800 and selected overprint clears and overlaminates from the same series For Graphics for Floors: - The above screen printing inks and electrostatic imaging toners and Scotchcal overlaminate film 646 M Prespace Tape SCPS-2 M Premask Tape SCPS-5X
Product Line This information, which is for M Scotchcal Luminous Film 5900 is subject to change. Refer to the Fax-on- Demand Index to make sure this is the most current Product Bulletin. Property Color Adhesive Adhesive color Liner surfaces Warranted substrates Luminance temperature range (air and substrate) Description Matte, light yellowish green Permanent, pressure sensitive Gray 78 pound, white kraft paper Flat Simple curves Anodized aluminum Painted metal Etched aluminum Ceramic* Fiberglass Waxed vinyl* Sealed concrete* Meets luminance requirements for IMO A.752(8) (adopted 4 November 99) 40 to 00 F (4 to 8 C) * Warranted substrates for M Graphics for Floors Effective Performance Life The effective performance life of Scotchcal luminous film 5900 is based on field experience and exposure tests conducted throughout the United States. When the graphics are processed and used according to M recommendations, they should have the performance life shown in the chart below. The actual performance depends on the: Correct combination of film or sheeting, ink or toner, and laminate or overprint clear Ink formulation Drying methods Selection and preparation of the substrate methods Exposure conditions Cleaning methods Warranted Durability - Screen Printed Signs M Scotchcal Screen Printing Inks and Overprint Clears Ink Series Overprint Clear Exterior Unprinted None 900 920 DR 900 920 6600 I None 6620 I Warranted Durability - Electrostatically Imaged Signs M Scotchprint Toner Series M Scotchcal Overlaminate Films Exterior 8700/8800 8920 (ES) 890 (ES) 89 (ES) 892 (ES) 895 (ES) Warranted Durability - Screen Printed Graphics for Floors M Scotchcal Screen Printing Ink Series M Scotchcal Overlaminate Film Unprinted 646 900 646 900 646 6600 I 646 Warranted Durability - Electrostatically Imaged Graphics for Floors M Scotchprint Toner Series Overlaminate Film 8700/8800 646 Warranty Limitation The warranty applies to floor graphics that are not installed in areas of power floor cleaning equipment, forklift or pallet traffic. Screen Printing and Imaging To get the durability given in the Effective Performance Life section, use the correct combination of ink or toner and overprint clear or overlaminate film. Carefully follow the processing directions. Check the appropriate Product and Instruction Bulletins referenced in the M Related Literature section for the recommended processing and limitations of each ink. Screen Printing Compatible Products Film 5900 can be printed with these Scotchcal screen printing inks and overprinted with the overprint clear from the same ink series. Ink series 900 Ink series 900 Ink series 6600 I 2 - Product Bulletin 5900
The following M products are referenced on this page: M Graphics for Floors M Scotchcal Overlaminate Film646 M Scotchcal Luminous Film 5900 M Scotchprint Toner Series 8700/8800 M Scotchcal Overprint Protective Clear 8920 (ES) M Scotchcal Electrostatic Protective Overlaminate - Luster 890 (ES) - Matte 89 (ES) - High Gloss, Graffiti Resistant 892 (ES) - Ultra Matte 895 (ES) M Scotchcal Screen Printing Ink Series 900, Series 900 and Series 6600 I M Prespace Tape SCPS-2 M Premask Tape SCPS-5X Electrostatic Imaging Compatible Products Film 5900 can be electrostatically imaged with toner series 8700/8800 and overlaminated with the following materials: Overprint clear 8920 (ES) Overlaminate 890 (ES), 89 (ES), 892 (ES) or 895 (ES) Products Compatible with Graphics for Floors For graphics for floors, film 5900 can be screen printed or electrostatically imaged with the screen printing inks or toners listed previously. The graphic must be overlaminated with film 646. Cutting These are the accepted cutting methods for luminous film 5900. Bandsawing Guillotine Hand cut Die cut Prespacing Processing Film 5900 unprinted or printed with the following screen printing inks or toners, which may include overprint clear or overlaminate: 900 900 6600 I 8700/8800 and 8920 (ES) 8700/8800 and 890 (ES), 89 (ES), 892 (ES), or 895 (ES) Flatbed electronic cutter M Tape not required Processing Film 5900 and other film unprinted or printed with ink/toner series 900 900 8700/8800 and 890 (ES), 89 (ES), 892 (ES), or 895 (ES) Film 5900 OR other film is printed with ink/toner series 6600 I 8700/8800 and 8920 (ES) M Tape SCPS-2 SCPS-5X Apply film 5900 like any other M pressure-sensitive film. The application temperature range for both the air and substrate is 40 to 00 F (4 to 8 C). Refer to Instruction Bulletin 5.5 for more details. If the sign construction has a film other than film 5900 as the bottom film (the film that actually adheres to the substrate), be sure you apply the sign to a substrate that is approved for that film. Recharging Luminous Film Whether film 5900 is used in an interior or exterior application, you must provide an adequate light source to recharge the film. The recommended light source is a cool white fluorescent light that illuminates the film surface to at least 200 to 00 Lux (typical office lighting). Charging times shorter than minutes are not recommended. Lower illumination levels or other lighting sources such as incandescent, will reduce the afterglow brightness in level and duration. Also read Luminance Characteristics on page 4, or contact Technical Service for further information. Note: Even when adequately charged, an exterior sign made with this film may not be as visually effective as an interior sign. This is due to the effect of other light sources in the area such as the moon, and landscaping and street lighting. Removal Film 5900 has an aggressive, pressure-sensitive adhesive and may be difficult to remove. A solvent-based adhesive remover system may be needed. Refer to Instruction Bulletin 6.5 for more details. When used as graphics for floors on approved substrates, the product is removable although the adhesive is aggressive. Applying cut letters either made of film 5900 or applied to film 5900 SCPS-2 Product Bulletin 5900 -
Shelf Life, Storage, Shipping Follow these guidelines to store and ship M Scotchcal Luminous Film 5900 and the processed graphics: Unprocessed film has a shelf life of 2 years from the date of receipt from M. Processed film must be used within year, even if the combined shelf life as processed and unprocessed film is less than 2 years. Store the graphics in a clean, dry area, out of direct sunlight, and at a temperature less than 00 F (8 C). Ship the finished graphic lying flat or in a roll. To roll, wrap the graphic, film side out, onto a minimum 5 inch ( cm) diameter core. These methods prevent the film from wrinkling or popping off the liner. Health and Safety! Caution Read the manufacturers container labels and the Material Safety Data Sheets (MSDS) for health hazard data, precautionary information, suggested first aid, and environmental information when handling any chemical products. For health and safety information for M products, or in case of an emergency, call -800-64-577 or -65-77-650. When using any equipment, always follow the manufacturers instructions for safe operation. Product Data The values given are typical for film 5900. For a custom specification, submit a request to your M sales representative. Flammability Film 5900 meets the requirements of the National Fire Protection Association Class A as defined in NFPA 0, Life Safety Code: - Scotchcal luminous film 5900 only, tested per ASTM E84-95; - Scotchcal luminous film 5900 with Scotchcal overlaminate film 646, tested to E648-94a. Film 5900 meets the Federal Railroad Administration guidelines for flame spread and smoke density; tested per ASTM E62 and E662 Physical Properties Property English Units Metric Units Thickness (film and adhesive) Service temperature range 0.02 to 0.04 inch -0 to +200 F 0.0 to 0.5 mm -4 to +9 C Applied shrinkage 0.0 inch 0.8 mm Tensile strength 2 pounds/inch 2.5 kg/cm at (minimum) at 7 F 2 C Luminance Characteristics The afterglow of luminous film degrades with time once the charging source is removed. This characteristic must be taken into account when designing and locating signs and markings. The amount of afterglow visibility depends on the observation conditions, such as ambient light, observer, etc. The following table is the typical afterglow (luminance) measured on film 5900. The test samples were illuminated for hour with a cool white fluorescent source, at a distance providing at least 54 lux at the surface. (mcd/m 2: milli candela per square meters). Elapsed Time Luminance minute 20 mcd/m 2 0 minutes 5 mcd/m 2 20 minutes 7 mcd/m 2 0 minutes 5 mcd/m 2 60 minutes 2 mcd/m 2 20 minutes mcd/m 2 To obtain acceptable performance, attention must be given to the type of charging source, the illumination level reaching the film surface, and the viewing conditions. See Recharging Luminous Film on page. Chemical Characteristics Resists mild acids, mild alkalis, and salts Excellent water resistance Minimum Adhesion Adhesion value is 24 hours after application. Substrate English Units pound/inch Metric Units kg/cm Aluminum, anodized 4.0 0.7 Aluminum, etched 4.0 0.7 Fiberglass 4.0 0.7 Acrylic enamel 4.0 0.7 4 - Product Bulletin 5900
Warranty and Limited Remedy The following is made in lieu of all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose: M Scotchcal Luminous Film 5900 is warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications stated in this Product Bulletin. M will replace or refund the price of any M materials that do not meet this warranty within the specified time periods. See the worldwide M MCS Warranty bulletin, which gives the terms and limitations of the warranty. These remedies are exclusive. In no case shall M be liable for any direct, indirect, or consequential damages, including any labor or non-m materials charges. Note: The higher adhesion of Scotchcal luminous film 5900 may make it more difficult to remove the graphic and may result in damage to the substrate; such damage is not covered by the M warranty. M Related Literature Listed below is related M technical literature that may be of interest. You may view and print these Bulletins from our website at www.scotchprintgraphics.com, or order them via our Fax-on-Demand (FOD) system. Call one of these phone numbers to order the desired bulletins, and specify the FOD document number provided in the chart. United States or Canada: -800-64-0768 International: -65 72 6506 Subject Product Bulletins Bulletin FOD M Controltac Plus Film Series 62 62 004 M Controltac Plus Marking System 80 005 Series 80 M Scotchcal Film Series 220 220 09 M Scotchcal Translucent Film Series 20 002 20 M Scotchlite Reflective Sheeting 280 200 Series 280 M Scotchlite Flexible Reflective 580 2006 Sheeting Series 580 M Scotchlite Plus Flexible Reflective 680 2007 Sheeting Series 680 M Scotchcal Screen Printing Ink 900 250 Series 900 M Scotchcal Translucent Film Series 60 009 60 M Scotchcal Overlaminate Film 646 646 57 Subject Product Bulletins M Scotchcal Screen Printing Ink Series 900 and Overprint Clear VI0402 M Scotchcal ElectroCut Film Series 7725 M Scotchprint Exterior Toner Series 8700/8800 M Scotchcal Electrostatic Protective Overlaminates -Luster 890 (ES) -Matte 89 (ES) -High Gloss Graffiti Resistant 892 (ES) -Ultra Matte 895 (ES) M Scotchcal Electrostatic Screen Print Protective Clear 8920 (ES) Instruction Bulletins Bulletin FOD 900 2509 7725 0 8700/ 8800 890 89 892 895 54 59 520 52 522 8920 250 Design of markings 2. 550 Screen printing with M Scotchcal Screen Printing Ink Series 900 Screen printing with M Scotchcal Screen Printing Ink Series6600 I Screen printing with M Scotchcal Screen Printing Ink Series900. 600.2 6002. 60 Importing YMCK digital image data 4.6 6506 Transferring Scotchprint images 4.7 6507 Clear coating and overlaminating 4.8 6508 Scoring and cutting 4. 650 Laminating graphics for floors 5.9 709 Premasking/prespacing 4. 650 Surface preparation, non vehicular 5. 700 to flat and curved surfaces, 5.5 7005 markings with pressure sensitive adhesive Applying/maintaining graphics for floors 5.26 7026 Storage, maintenance, removal 6.5 8505 Warranties Worldwide M MCS Warranty Packet 950 (includes all Commercial Graphics MCS Warranties) Worldwide M MCS Warranty Overview-Folder 9504 M Scotchprint Graphics Warranty (includes overview) M Graphics for Floors Warranty (includes overview) 9505 9508 Product Bulletin 5900-5
Commercial Graphics Division M Canada M México, S.A. de C.V. M Puerto Rico, Inc. M Center, Building 220-6W-06 P.O. Box 5757 Av. Santa Fe 55 Puerto Rico Industrial Park PO Box 220 London, Ontario Col. Santa Fe, Del. Alvaro Obregón P.O. Box 00 St. Paul, MN 55-220 USA Canada N6A 4T México, D.F. 020 Carolina, PR 00986-000 General Info. -800-74-6772-800-265-840 52-5-270-0400 787-620-000 Technical Info. -800-28-908 Fax 59-452-6245 Fax 52-5-270-2277 Fax 787-750-05 Fax -65-76-42 Fax-on-Demand -800-64-0768 US/Canada or -65 72 6506 International Fax-on-Demand document: 08 40% pre-consumer waste paper Printed in USA www.scotchprintgraphics.com 0% post-consumer waste paper M 200. All rights reserved. 6 - Product Bulletin 5900