Optical Precision. Optimal Outcome.

Optical Precision. Optimal Outcome. 3402 Enterprise Drive Rowlett, TX 75088 USA Telephone: +1 (972) 463-8001 Fax: +1 (972) 463-8311 www.archeroptx.com

PerfectLens Ultra Precision Glass Molded Aspheres Lens # OD (mm) EFL (mm) NA BFL (mm) Replacement for: Cover Glass Thickness (mm) L671-Z * 6.33 4.00 0.60 2.4 LPT 35x67x 0.25 K390 6.00 4.56 0.55 2.9 Kodak A390 0.275 L230 6.33 4.56 0.55 2.9 LPT 350230 0.275 L340 6.33 6.10 0.62 2.1 LPT 350340 1.20 L170 4.71 6.25 0.30 5.0 LPT 350170 0.30 L110 7.00 6.25 0.40 5.0 LPT 35x110 0.30 K375 6.50 7.50 0.30 6.0 Kodak A375 0.275 L240 9.93 8.00 0.50 5.9 LPT 350240 0.25 P4510 4.50 10.00 0.20 8.5 0.30 P6410 6.40 10.00 0.28 8.5 0.30 L220 7.20 11.00 0.30 9.7 LPT 35x220 0.275 K397 7.20 11.00 0.30 9.7 Kodak A397 0.275 P6412 6.40 12.50 0.22 10.7 0.30 L280 6.50 18.39 0.15 17.1 LPT 350280 0.25 Guaranteed wavefront error 0.05 waves RMS (λ= 632.8 nm). Lenses may be edged to smaller diameters on special order basis. A, B and C BBAR, V and SLAR coatings available as standard/custom basis. * L671-Z design is at 408 nm; the best blue lens in the world - ask for details. The PerfectLens process for ulta precision glass molding enables extremely tight tolerancing with high temperature/low CTE RoHS compliant glasses. The benefits to you are: unmatched optical performance with production running at a typical transmitted wavefront error of 0.02 to 0.03 waves RMS; reduced labor cost for incoming QA inspection & production and a more consistent final product. PerfectLens glass molded aspheres are only made by... www.archeroptx.com PerfectLens Ultra Precision Molding

PerfectLens Ultra Precision Long Focal Length Aspheric Lenses Lens # OD (mm) EFL (mm) NA BFL (mm) Clear Aperture (mm): Cover Glass Thickness (mm) P9515 9.50 15.00 0.24 13.0 7.60 0.30 P1221 12.50 21.00 0.28 19.0 11.00 0.30 P1322 13.00 23.00 0.24 21.0 12.50 0.30 Lenses may be edged to smaller diameters on special order basis. A, B and C BBAR, V and SLAR coatings available as standard/custom basis. Custom Molded Aspheric Lenses In addition to our catalog molded aspheric lenses, Archer OpTx has the capability to fabricate custom molded aspheric lenses to meet specific customer requirements. Custom aspheric and acylindrical optics can be fabricated using any of our 15 standard RoHS compliant molding glasses. Additional glass types may be available depending on requested parameters. Custom PerfectLens aspheric optics can be molded from 0.3mm to 55mm in diameter. Typical tolerances are: Diameter: +0, -0.025mm Center Thickness: +/- 0.03mm Centration: <3 arcmin Focal Length: 1%, manufacturing repeatability at 0.5% Surface Finish: 40/20 scratch/dig Form Irregularity: <0.15 microns PV under 10mm Dia. <0.3 microns PV from 10-30mm Dia. <0.4 microns PV from 30-55mm Dia. Archer OpTx can also provide optical design assistance to maximize the performance of custom applications. Our Expertise In Focus. Our capabilities include custom design, development, metrology, and manufacturing of precision aspheres for a broad range of applications: medical, defense, communications, measurement, industrial, and more. What s more, we make it easy for you to streamline all optical design and production through Archer OpTx.

CNC Precision Machined Aspheres Part Number EFL @ 546 nm Diameter (mm) NA Center Thickness (mm) GACP-25-40 40.0 25.0 0.28 8.0 GACP-25-50 50.0 25.0 0.23 8.0 GACP-25-60 60.0 25.0 0.19 8.0 GACP-25-70 70.0 25.0 0.16 8.0 GACP-25-80 80.0 25.0 0.14 8.0 GACP-25-100 100.0 25.0 0.11 8.0 GACP-30-40 40.0 30.0 0.34 9.0 GACP-50-80 80.0 50.0 0.28 12.0 GACP-50-120 120.0 50.0 0.19 10.0 GACP-50-160 160.0 50.0 0.14 10.0 GACP-50-200 200.0 50.0 0.11 10.0 GACP-100-125 125.0 100.0 0.36 30.0 GACP-100-125S 125.0 100.0 0.36 20.0 Centration: Center Thickness: Diameter: Surface Finish: Chamfer: 1 arcminute ± 0.1 mm + 0, -0.25 mm 40-20 scratch-dig 0.1-0.3 mm EFL Tolerance: ± 1% Clear Aperture: Central 90% of diameter Coating: Standard and high power coatings available Material: UV grade fused silica standard GACP-100-125S is SF4 glass. Aspheric Surface irregularity: 0.4 microns Peak-to-Valley Plano Surface Flatness: Lambda/4 (Lambda/10 upon request) Metrology Services Archer OpTx utilizes the most sophisticated optical inspection equipment in the industry to measure and characterize all of our product offerings. Archer OpTx is now making all of this equipment available for contract measurement servixes. Our state-of-the-art equipment includes: Taylor Hobson PGI1240 Talysurf Zygo XP / D Digital Interferometer, 4 Aperture Trioptics OptiSpheric Vertical Lense Bench Utilizing this equipment, Archer OpTx provides the following: optical measurement services for spherical lenses, aspherical lenses, cylindrical lenses, and optical assemblies: EFL BFL FFL Centration MTF Radius of Curvature Transmitted Wavefront (@ 633nm) Surface Flatness Wedge Surface Form/Figure Surface Roughness

Traditional Optics We provide a full range of traditional components with spherical, cylindrical, flat and toroidal surfaces. Components are available in diameters as small as a few millimeters to as large as several hundred millimeters for large-scale projects. Spherical Optics Our spherical optics are manufactured in many sizes. We have a large number of standard cemented positive and negative achromats that are available on short notice. Since we produce to order, this allows us to alter tolerances or coating for custom requirements. The newest lens catalogs in OpTaliX, ZEMAX, CODE V and OSLO include our machined asphere designs and our large collection of achromats. A complete list is also available on our website at www.archeroptx.com. Cylindrical Optics We supply cylindrical optics on a made-to-order basis using a variety of materals. Flatwork Acher OpTx can provide flats and prisms as small as one millimeter and as large as several hundred millimeters on a side. Our facilities produce thousands of quality prisms and flats; we can make room for yours. Glass and other materials, such as Zerodur, are available as needed. Whether you need a prism you can pick up with tweezers or one that requires a crane, Archer OpTx can meet your needs. Toroids and other unusual shapes Our abilities are not confined to standard shapes. Our experienced personnel can make atypical and demanding shapes such as toroids. Coatings We offer standard and high-power optical coatings on products according to your specifications. Even somewhat esoteric coatings such ITO can be provided to add the finishing touches to your product. Optical Filters Archer OpTx provides optical filters of various types and configurations utlizing hard dielectic coatings, soft dielectic coatings and metals. Sophisticated coating chambers, software and metrology facilities make these highperformance filters possible. Tolerances of ± 5 nm on center wavelength and pass band are routine; for special projects, 1 nm tolerances are possible. Precision grind & polish

Positive Achromatic Doublets Archer P/N Diameter EFL Lens 1 material Lens 2 material R1 R2 R3 CT1 CT2 ADP-5-7.5A 5.00 7.5 BK7 SF5 5.100-3.100-7.100 3.00 1.00 ADP-5-7.5B 5.00 7.5 BK7 SF6 5.100-3.500-6.329 3.00 1.00 ADP-5-10A 5.00 10 BK7 SF5 6.329-4.328-11.350 2 5 1.00 ADP-5-10B 5.00 10 BK7 SF6 6.000-5.100-10.610 2.50 1.00 ADP-5-15A 5.00 15 BK7 SF5 9.247-6.481-18.408 2.00 1.00 ADP-5-15B 5.00 15 BK7 SF6 8.770-7.360-16.596 2.00 1.00 ADP-6-10A 6.00 10 BK7 SF5 6.329-4.328-11.350 3.00 1.00 ADP-6-10B 6.00 10 BK7 SF6 6.000-5.100-10.568 3.00 1.00 ADP-6.35-12.7A 6.35 12.7 BK7 SF5 8.000-5.754-15.136 2.50 1.20 ADP-6.35-12.7B 6.35 12.7 BK7 SF6 7.180-6.481-14.872 2.50 1.20 ADP-6.35-15A 6.35 15 BK7 SF5 9.350-6.750-18.408 2.50 1.20 ADP-6.35-15B 6.35 15 BK7 SF6 8.770-7.570-16.810 2.50 1.20 ADP-8-10A 8.00 10 BK7 SF5 6.087-5.100-12.460 4.50 1.20 ADP-8-10B 8.00 10 BK7 SF6 6.200-5.100-9.761 4.50 1.20 ADP-8-16A 8.00 16 BK7 SF5 9.957-7.410-19.953 2.80 1.20 ADP-8-16B 8.00 16 BK7 SF6 9.072-8.220-18.963 2.80 1.20 ADP-8-20A 8.00 20 BK7 SF5 12.460-8.954-24.720 2.80 1.20 ADP-8-20B 8.00 20 BK7 SF6 11.690-10.069-22.490 2.80 1.20 ADP-12.7-19A 12.70 19 BK7 SF5 11.900-9.072-23.000 6.00 1.50 ADP-12.7-19B 12.70 19 BK7 SF6 11.110-9.900-21.150 6.00 1.50 ADP-12.7-25A 12.70 25 BK7 SF5 15.305-11.565-32.180 5.00 1.50 ADP-12.7-25B 12.70 25 BK7 SF6 14.388-12.710-28.630 5.00 1.50 ADP-12.7-30A 12.70 30 BK7 SF5 18.408-13.737-38.756 4.00 1.50 ADP-12.7-30B 12.70 30 BK7 SF6 17.520-15.305-34.430 4.00 1.50 ADP-12.7-50A 12.70 50 BK7 SF5 30.620-22.220-64.880 2.80 1.50 ADP-12.7-50B 12.70 50 BK7 SF6 26.086-26.900-72.000 2.80 1.50 ADP-12.7-75A 12.70 75 BK7 SF5 45.600-33.327-99.303 2.50 1.50 ADP-12.7-75B 12.70 75 BK7 SF6 42.332-37.330-90.000 2.50 1.50 ADP-25.4-30A 25.40 30 BK7 SF5 18.707-15.668-36.600 13.50 2.50 ADP-25.4-30B 25.40 30 BK7 SF6 17.600-16.457-33.327 13.50 2.50 ADP-25.4-35A 25.40 35 BK7 SF5 21.710-17.539-44.284 12.00 2.50 ADP-25.4-35B 25.40 35 BK7 SF6 20.304-18.707-40.000 12.00 2.50 ADP-25.4-40A 25.40 40 BK7 SF5 24.830-19.470-50.700 10.50 2.50 ADP-25.4-40B 25.40 40 BK7 SF6 23.170-21.100-46.340 10.50 2.50 ADP-25.4-45A 25.40 45 BK7 SF5 27.774-21.579-58.080 9.50 2.50 ADP-25.4-45B 25.40 45 BK7 SF6 25.940-23.610-53.921 9.50 2.50 ADP-25.4-50A 25.40 50 BK7 SF5 31.000-23.330-63.630 9.00 2.50 ADP-25.4-50B 25.40 50 BK7 SF6 28.840-25.680-57.970 9.00 2.50 ADP-25.4-60A 25.40 60 BK7 SF5 36.961-27.451-77.420 8.00 2.50 ADP-25.4-60B 25.40 60 BK7 SF6 33.327-31.520-76.000 8.00 2.50 ADP-25.4-75A 25.40 75 BK7 SF5 45.710-34.014-98.770 7.00 2.50 ADP-25.4-75B 25.40 75 BK7 SF6 42.613-38.200-90.000 7.00 2.50 ADP-25.4-100A 25.40 100 BK7 SF5 61.800-44.478-128.830 6.00 2.50 ADP-25.4-100B 25.40 100 BK7 SF6 57.654-51.520-118.950 6.00 2.50 ADP-25.4-150A 25.40 150 BK7 SF5 91.150-66.370-197.700 5.00 2.50 ADP-25.4-150B 25.40 150 BK7 SF6 85.900-76.000-178.000 5.00 2.50 ADP-25.4-200A 25.40 200 BK7 SF5 122.180-90.000-266.400 4.00 2.50 ADP-25.4-200B 25.40 200 BK7 SF6 117.760-98.123-224.560 4.00 2.50 ADP-25.4-250A 25.40 250 BK7 SF5 152.400-111.400-330.940 4.00 2.50 ADP-25.4-250B 25.40 250 BK7 SF6 149.970-118.950-266.400 4.00 2.50 ADP-25.4-300A 25.40 300 BK7 SF5 182.410-133.970-397.604 3.00 2.50 ADP-25.4-300B 25.40 300 BK7 SF6 186.210-138.310-300.685 3.00 2.50 ADP-25.4-400A 25.40 400 BK7 SF5 243.800-177.155-534.328 3.00 2.50 ADP-25.4-400B 25.40 400 BK7 SF6 266.400-174.588-361.534 3.00 2.50 ADP-25.4-500A 25.40 500 BK7 SF5 304.580-220.764-662.760 3.00 2.50 ADP-25.4-500B 25.40 500 BK7 SF6 361.534-205.310-405.423 3.00 2.50 60-40 scratch dig Centration 3 arcmin Diameter +0/-0.1 mm (5-12.7nm); +0/-0.25 mm (25mm+) VIS BBAR coating standard

Archer P/N Diameter EFL Lens1 material Lens 2 material R1 R2 R3 CT1 CT2 ADP-30-50A 30.00 50 BK7 SF5 30.417-22.220-62.705 12.50 2.50 ADP-30-50B 30.00 50 BK7 SF6 28.252-24.390-56.445 12.50 2.50 ADP-30-80A 30.00 80 BK7 SF5 48.990-36.600-105.350 7.50 2.50 ADP-30-80B 30.00 80 BK7 SF6 46.340-41.370-95.215 7.50 2.50 ADP-30-100A 30.00 100 BK7 SF5 61.026-44.842-131.726 7.50 2.50 ADP-30-100B 30.00 100 BK7 SF6 58.080-50.350-116.410 7.50 2.50 ADP-50.8-75A 50.80 75 BK7 SF5 46.340-37.760-98.770 21.00 4.00 ADP-50.8-75B 50.80 75 BK7 SF6 43.188-40.640-88.830 21.00 4.00 ADP-50.8-80A 50.80 80 BK7 SF5 48.600-40.000-108.380 19.00 4.00 ADP-50.8-80B 50.80 80 BK7 SF6 45.600-43.290-96.610 19.00 4.00 ADP-50.8-100A 50.80 100 BK7 SF5 61.800-47.097-128.830 17.00 4.00 ADP-50.8-100B 50.80 100 BK7 SF6 57.654-51.760-116.680 17.00 4.00 ADP-50.8-150A 50.80 150 BK7 SF5 92.900-68.270-194.990 11.50 4.00 ADP-50.8-150B 50.80 150 BK7 SF6 85.512-75.000-175.770 11.50 4.00 ADP-50.8-200A 50.80 200 BK7 SF5 122.180-90.000-263.470 9.00 4.00 ADP-50.8-200B 50.80 200 BK7 SF6 117.760-98.123-222.450 9.00 4.00 ADP-50.8-250A 50.80 250 BK7 SF5 152.400-111.400-330.940 8.00 4.00 ADP-50.8-250B 50.80 250 BK7 SF6 149.970-118.950-266.400 8.00 4.00 ADP-50.8-300A 50.80 300 BK7 SF5 182.410-133.970-397.604 7.00 4.00 ADP-50.8-300B 50.80 300 BK7 SF6 186.210-138.310-300.685 7.00 4.00 ADP-50.8-400A 50.80 400 BK7 SF5 243.800-177.155-534.328 6.00 4.00 ADP-50.8-400B 50.80 400 BK7 SF6 266.400-174.588-361.534 6.00 4.00 ADP-50.8-500A 50.80 500 BK7 SF5 304.580-220.764-662.760 6.00 4.00 ADP-50.8-500B 50.80 500 BK7 SF6 361.534-205.310-405.423 6.00 4.00 ADP-50.8-750A 50.80 750 BK7 SF5 455.000-330.940-1000.000 5.00 4.00 ADP-50.8-750B 50.80 750 BK7 SF6 721.110-250.750-455.000 5.00 4.00 ADP-50.8-1000A 50.80 1000 BK7 SF5 600.320-442.338-1367.700 5.00 4.00 ADP-50.8-1000B 50.80 1000 BK7 SF6 1400.000-275.000-479.140 5.00 4.00 Negative Achromatic Doublets Archer P/N Diameter EFL Lens 1 material Lens 2 material R1 R2 R3 CT1 CT2 ADN-6-9A 6.0-9 BK7 SF5-6.329 5.100 12.067 0.90 1.50 ADN-6-9B 6.0-9 BK7 SF6-5.900 5.600 11.109 0.90 1.50 ADN-8-12A 8.0-12 BK7 SF5-8.465 6.750 15.889 1.20 2.00 ADN-8-12B 8.0-12 BK7 SF6-7.790 7.410 14.799 1.20 2.00 ADN-10-15A 10.0-15 BK7 SF5-10.567 8.465 19.952 1.50 2.50 ADN-10-15B 10.0-15 BK7 SF6-9.760 9.459 18.707 1.50 2.50 ADN-12.7-20A 12.6-20 BK7 SF5-15.205 10.519 23.000 1.50 3.00 ADN-12.7-20B 12.6-20 BK7 SF6-14.264 11.507 21.149 1.50 3.00 ADN-12.7-25A 12.6-25 BK7 SF5-16.827 12.500 32.179 1.50 3.00 ADN-12.7-25B 12.6-25 BK7 SF6-16.110 13.964 28.629 1.50 3.00 ADN-12.7-30A 12.6-30 BK7 SF5-19.498 14.139 38.756 1.50 2.50 ADN-12.7-30B 12.6-30 BK7 SF6-18.707 16.239 34.589 1.50 2.50 ADN-12.7-50A 12.6-50 BK7 SF5-31.520 22.489 64.879 1.50 2.50 ADN-12.7-50B 12.6-50 BK7 SF6-26.742 27.209 72.000 1.50 2.50 ADN-25.4-40A 25.3-40 BK7 SF5-28.355 21.879 50.699 2.50 5.50 ADN-25.4-40B 25.3-40 BK7 SF6-26.060 23.500 47.097 2.50 5.50 ADN-25.4-50A 25.3-50 BK7 SF5-34.014 25.108 63.209 2.50 5.00 ADN-25.4-50B 25.3-50 BK7 SF6-31.800 28.049 57.969 2.50 5.00 ADN-25.4-75A 25.3-75 BK7 SF5-45.710 36.000 108.379 2.50 5.00 ADN-25.4-75B 25.3-75 BK7 SF6-45.000 40.339 90.000 2.50 5.00 ADN-25.4-100A 25.3-100 BK7 SF5-61.800 45.000 133.969 2.50 5.00 ADN-25.4-100B 25.3-100 BK7 SF6-57.654 51.759 122.179 2.50 5.00

Optical Precision. Optimal Outcome. 3402 Enterprise Drive Rowlett, TX 75088 USA Telephone: +1 (972) 463-8001 Fax: +1 (972) 463-8311 www.archeroptx.com