April 2007 Club Scrap Stratosphere Materials: CS Stratosphere Kit o Embellishment Pack o Wood Mounted Stamp Stratosphere Unmounted Borders & Backgrounds Explore, Dream, Discover Wood Mounted Stamp Tools: Paper Piercing Tool 12 Paper Trimmer Craft Knife or Rotary Blade Cutting Mat Fraction to Decimal Conversions 1/8" =.125" 1/2" =.5" 7/8" =.875" 1/4" =.25" 5/8" =.625" 3/8" =.375" 3/4" =.75 Adhesive Foam Adhesive Tape Black Ink ColorBox Fluid Chalk Blue Lagoon Ink Paper Piercing Tool Cork Board Heat Tool Note: We have incorporated items from the Embellishment Pack, Wood Mounted Rubber Stamps, and UM Rubber Stamps into many of this month s layouts. If you do not have all of the items, simply make a substitution or eliminate the step. All rights reserved 2007, Club Scrap, Inc.
April 2007 Stratosphere Page 2 of 10 Layout #1 and #2 12x12 Light Blue Print 12x12 Fuchsia Plain (3) 4.25x6.25 Light Blue Print Photo Mattes (3) 4.25x6.25 Fuchsia Plain Photo Mattes Light Blue Print Overlay Frames Fuchsia Die Cut Tags Fuchsia Microbeads and Red-Liner Tape Explore, Dream, Discover Stamp Black Ink Foam Tape 1. Affix microbeads with red-liner tape to the curved lines on the 12x12 Light Blue Print. Attach the photo mattes to the left page with foam tape. This will allow space between the mattes and beads and will add dimension.
April 2007 Stratosphere Page 3 of 10 Layout #3 and #4 12x12 Dark Blue Print 12x12 Dark Blue Plain 12x12 Translucent Plain (3) 4.25x6.25 Green Photo Mattes (2) 14-inch Tri-Colored Rayon Ribbon (3) Green Square Brads Blue Lagoon Ink Paper Piercing Tool Cork Board Green Frame Overlays Heat Tool Unmounted Borders & Backgrounds Tape 1. Trim the 12x12 Translucent Plain at 8 and 6. Rotate the 6x12 horizontally and cut at 8 and 4. 2. Stamp the UM squiggle image onto the 4x12 Translucent Plain with Blue Lagoon ink. Heat set before touching the paper to avoid smearing.
April 2007 Stratosphere Page 4 of 10 Layout #5 and #6 (2) 12x12 Green Print 12x12 Light Blue Plain (2) 8.5x11 Translucent Print 8.5x11 Dark Blue Plain Green Frame Overlays Light Blue Square Brad Paper Piercing Tool Cork Board 1. Trim the 12x12 Light Blue plain at 6. Stack and rotate horizontally; cut at 8 and 4 to make six 4x6 photo mattes. 2. Place the 8.5x11 Dark Blue Plain vertically into the trimmer; cut at 6 and 3.5.
April 2007 Stratosphere Page 5 of 10 Layout #7 and #8 12x12 Fuchsia Print 12x12 Fuchsia Plain 12x12 Light Blue Plain (2) 8.5x11 Green Prints Polka Dot Ribbon Unmounted Borders & Backgrounds Light Blue Frame Overlays Tape Black Ink 1. Trim the 12x12 Light Blue Plain at 10.5, 9, and 4.5. Place one 4.5x12 strip horizontally into the trimmer and cut at 9.75 and 6.5. Trim the 3.25x4.5 vertically at 3.5 and 1.75. 2. Place one 8.5x11 Green Print vertically into the trimmer; cut at 5. Rotate the 5x11 horizontally and trim at 7. Trim the 3.5x11 horizontally at 9, 7, and 5. Repeat with the second 8.5x11 Green Print.
April 2007 Stratosphere Page 6 of 10 Layout #9 and #10 12x12 Light Blue Print 12x12 Dark Blue Plain 8.5x11 Light Blue Plain 3.5x11 Dark Blue Plain (From Layout #5 and #6) 4.5x12 Light Blue Plain (From Layout #7 and #8) 1x3.25 Light Blue Plain (From Layout #7 and #8) 2.25x4.5 Light Blue Plain (From Layout #7 and #8) (3) 4.25x6.25 Dark Blue Plain Photo Mattes (5) Dark Blue Mini Brads (3) Light Blue Mini Brads Light Blue Frame Overlays Die Cut Stickers Paper Piercing Tool Cork Board 1. Trim the 8.5x11 Light Blue Plain vertically at 4.25. Rotate one 4.25x11 piece horizontally and cut at 5.5.
April 2007 Stratosphere Page 7 of 10 Layout #11 and #12 (2) 12x12 Green Plain 12x12 Dark Blue Print (2) 8.5x11 Fuchsia Plain Dark Blue Borders and Backgrounds Fuchsia Die Cut Tags Multi-Colored Fiber Craft Knife or Rotary Blade Cutting Mat 1. Trim the 12x12 Blue Print design into sections with a craft knife or rotary blade and cutting mat. Cut the center section down the middle to create two additional pieces with a straight edge.
April 2007 Stratosphere Page 8 of 10 Place one 8.5x11 Fuchsia Plain vertically into the trimmer and cut at 4.25. Stack and rotate horizontally; trim at 5.5. 2. Trim the other 8.5x11 Fuchsia Plain vertically at 5.75. Place the 2.75x11 horizontally into the trimmer and cut at 8.25, 5.5, and 2.75.
April 2007 Stratosphere Page 9 of 10 Layout #13 12x12 Fuchsia Print 12x12 Translucent Plain 8.5x11 Dark Blue Plain 5.75x11 Fuchsia Plain (Layout #11 and #12) 4.25x11 Light Blue Plain (Layout #9 and #10) Light Blue Microbeads Wood Mounted Stamp Light Blue and Green Frame Overlays Red-Liner Tape Green Fiber Black Ink Heat Tool Tape 1. Trim the 12x12 Translucent at 9. Rotate the 9x12 horizontally and cut at 11.5.
April 2007 Stratosphere Page 10 of 10 2. Place the 5.75x11 Fuchsia Plain into the trimmer horizontally and trim at 10.75. 3. Cut the 4.25x11 Light Blue Plain horizontally at 6.25.