ADVANCED FLAT CABLE SOLUTIONS

ADVANCED FLAT CABLE SOLUTIONS

ONTENTS Contents F Flat Ribbon Cable Overview 03 Microzip Summary Sheet 04 Microzip TPO Solid & Stranded 0.025 inch (0.635 mm) 05 Microzip PVC Solid & Stranded 0.025 inch (0.635 mm) 06 Ribbon Stranded PVC 0.033 inch (0.845 mm) & 0.039 inch (1 mm) 07 PVC Rainbow Ribbon 0.050 inch (1.27 mm) 08 PVC Stranded & Hi-Flex 7 and 19 Stranded 0.050 inch (1.27 mm) 09 TPO Stranded Flat Ribbon 0.050 inch (1.27 mm) 10 Solid Microzip Low Smoke Zero Halogen (LSZH) 0.025 inch (0.635 mm) 11 Stranded Ribbon Low Smoke Zero Halogen (LSZH) 0.050 inch (1.27 mm) 11 PVC Stranded Wide Pitch Ribbon 0.100 inch (2.54 mm), 0.156 Inch (3.96 mm) 12 Shielded and Jacketed Flat Ribbon 13 Manufacturing Overview 14 Flat MQT MQT (Micro-Quick Twist) Ribbon Summary Sheet & Data 15 PVC Stranded Micro Quick-Twist 0.025 inch (0.635 mm) 16 TPO Stranded & Solid Micro Quick-Twist 0.025 inch (0.635 mm) 17 Registered to ISO 9001: 2008 REACHCompliant Round to Flat Round to Flat Ribbon 18 Other Hitachi Products Other Products offered by Hitachi Cable America 19 Every effort has been made to ensure the accuracy of the data in this catalog. HCA cannot, however, assume responsibility for any typographical error which may have occurred. Print Version 9/2016 2 Contents

LAT RIBBON Flat Ribbon Cable The process for making great flat cable is simple. Start with the best materials. Then have the cable built by world class manufacturing personnel with the best equipment and tooling available. We run to the tightest tolerances in the industry with regards to the span and width of our ribbon cables ensuring consistent compatibility with your connector. With Hitachi Cable America you can feel confident specifying our cables to meet your needs for both electrical as well as physical performance. When faced with design issues for electrical performance, Hitachi Cable America has a variety of compounds to meet your specific environmental and electrical needs. Our commitment to excellence also means that we are globally competitive using state of the art equipment and manufactuing processes for ultimate efficiency. The products in this catalog are representative of Hitachi Cable s technical design abilities and manufacturing expertise in flat cable. For Standard & Custom Design Flat Cable: Call Us... Hitachi Cable America. Flat Ribbon 3

ICROZIP Microzip - Flat Ribbon Summary Sheet M PVC UL Styles: 2678 150V 105 C 2651 300V 105 C TPO UL Styles: 20848 150V 105 C Full extrusion construction providing the tightest pitch tolerance in the industry Contoured for easy IDC termination Offered with both stranded and solid conductors Suitable for SE, MSE, LVD, MLVD, SCSI, Ultra-ATA and other internal wiring applications REACH and RoHS 2 compliant Capacitance Impedance Propagation HCA Series No. Pitch inch (mm) Conductor AWG Stranding Insulation UL Style AWM 1 pf/ft. (pf/m) (G-S) pf/ft. (pf/m) (G-S-G) (G-S-G) (Ohms) SE (G-S) (Ohms) Diff. Delay ns/ft (ns/m) Skew ps/ft (ps/m) (max.) Page 23113 0.025 (0.635) 30 7/38 TC PVC 2678 15.8 (51.8) 23.30 (76.4) 75 110 1.62 (5.31) 30 (98) 6 23129 0.025 (0.635) 30 1/30 BC PVC 2678 14.2 (46.5) 25 (82.0) 80 130 1.52 (4.98) 36 (118) 6 23196 0.025 (0.635) 30 7/38 TC TPO 20848 8.80 (28.8) 15.7 (51.5) 82 123 1.44 (4.72) 30 (98) 5 20009 0.025 (0.635) 31 7/39 TC TPO 20848 9.43 (30.9) 15.75 (51.6) 90 127 1.42 (4.65) 40 (131) 6 23203 0.025 (0.635) 30 1/30 SC TPO 20848 9.10 (29.8) 15.5 (50.8) 90 130 1.45 (4.75) 25 (82) 5 23124 0.033 (0.845) 30 7/38 TC PVC 2678 14.4 (47.2) 22.50 (73.8) 89.3 136.2 1.57 (5.15) 60 (192) 7 23147 0.039 (1.0) 30 7/38 TC PVC 2678 10.03 (32.8) 16.71 (54.8) 140 100 1.46 (4.78) 25 (82) 7 20057 0.039 (1.0) 28 7/36 TC PVC 2651 12.30 (40.3) 22.10 (72.5) 125 90 1.46 (4.78) 50 (164) 7 Note 1: UL 758 Standard for Appliance Wiring Material (AWM) Note 2: For terms and abbreviations, please reference our Advanced Cabling Solutions catalog and under our Advanced Materials and FAQ sections on our website. 4 Microzip Summary

ICROZIP TPO Solid & Stranded 0.025 inch (0.635 mm) Microzip UL Style: 20848* CSA Style: AWM I A/B FT- 1 UL Voltage Rating: 150V CSA Voltage Rating: 150V UL Temp: 105 C CSA Temp: 105 C Tightest pitch tolerance in the industry Solid conductor construction for lower cost and higher impedance Operating temperature: -50 deg C to +105 deg C APPLICATIONS Ultra ATA 133 and Ultra 160 SCSI, backwards compatible Internal interconnections for electronic equipment.025.0016.027.002 REACH and RoHS 2 compliant PHYSICAL CONSTRUCTION DESCRIPTION These Microzip cables utilize 30 AWG solid or stranded copper extruded with Thermoplastic Olefin (TPO). A polarity stripe is co-extruded into position number one for easy identification and the stripe will not rub off. Standard color is light yellow with a red polarity stripe for 30 AWG and a violet polarity stripe for 32 AWG. Pitch Tolerance.0016 inches (.040 mm). 23196 Pitch: 0.025 in (0.635 mm) 23196 - XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: TPO Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 15.7(51.5) (G-S-G) pf/ft (pf/m): 25 (82) Impedance (G-S-G) SE - Single End: 82 ohms (G-S) Differential: 123 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.44 (4.72) Maximum Skew ns/ft (ns/m): 0.030 (0.098) 23203 Pitch: 0.025 in (0.635 mm) 23203 - XX - P - 00YYY Conductor AWG: 30 1/30 AWG SC Insulation: TPE Conductor Resistance ohms/1000 ft (ohms/km): 104 (341.12) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 9.1 (29.84) (G-S-G) pf/ft (pf/m): 15.5 (50.84) Impedance (G-S-G) SE - Single End: 90 ohms (G-S) Differential: 130 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.45 (4.75) Maximum Skew ns/ft (ns/m): 0.025 (0.082) Example 1 23196-26 - P - 00100 26 Example 2 23196-80 - P - 00100 80 Building a 23196 - XX - P - 00YYY XX 00YYY XX= No. of conductors: 26, 34, 40, 50, 64, 68, 80 YYY = (ft.): 100 Example 1 23203-34 - P - 00100 34 Example 2 23203-80 - P - 00200 80 Building a XX= No. of conductors: 34, 50, 68, 80 YYY = (ft.): 100, 400 200 ft 60.96 m 23203- XX - P - 00YYY XX 00YYY Width: 0.650 in (16.51 mm) Span: 0.625 in (15.87 mm) Width: 2.00 in (50.80 mm) Span: 1.975 in (50.16 mm) Width: XX *.025 in Span: XX *.025 in -.025 Width: 0.850 in (21.59 mm) Span: 0.825 in (20.95 mm) Width: 2.00 in (50.80 mm) Span: 1.975 in (50.16 mm) Width: XX *.025 in Span: XX *.025 in -.025 Other conductor counts and put-ups available upon request. Other variations include 24 AWG and 26 AWG cables. *Series 23196 and 23203 also offered as UL AWM 150V solutions (20647) upon special request 5 Microzip TPO Solid & Stranded

ICROZIP Microzip PVC Solid & Stranded 0.025 inch (0.635 mm) R UL Style: 2678 CSA Style: AWM I A/B FT- 1 UL Voltage Rating: 150V CSA Voltage Rating: 150V UL Temp: 105 C CSA Temp: 105 C Tightest pitch tolerance in the industry Solid conductor construction for lower cost and higher impedance Operating temperature: -20 deg C to +105 deg C APPLICATIONS Ultra ATA 133 and Ultra 160 SCSI, backwards compatible Internal interconnections for electronic equipment REACH and RoHS 2 compliant Note: 23113 thickness is 0.025 0.002.025.0016.027.002 RED POLARITY STRIPE ON #1 COND EDGE. PHYSICAL CONSTRUCTION DESCRIPTION This Microzip consists of 30 AWG solid bare or stranded tinned copper. are then fully extruded with PVC insulation. A red polarity stripe is added to the first conductor for easy identification. Standard color is gray. Pitch Tolerance =.0016 inches (.040 mm). 23129 Pitch: 0.025 in (0.635 mm) 23129 - XX - P - 00YYY Conductor AWG: 30 1/30 AWG BC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 104 (34.12) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 14.2 (46.57) (G-S-G) pf/ft (pf/m): 25 (82) Impedance (G-S-G) SE - Single End: 80 ohms (G-S) Differential: 130 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.52 (4.98) Maximum Skew ns/ft (ns/m): 0.036 (0.118) 23113 Pitch: 0.025 in (0.635 mm) 23113 - XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 15.8 (51.82) (G-S-G) pf/ft (pf/m): 23.3 (76.424) Impedance (G-S-G) SE - Single End: 75 ohms (G-S) Differential: 110 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.62 (5.31) Maximum Skew ns/ft (ns/m): 0.030 (0.098) Example 1 23129-20 - P - 00100 20 Example 2 23129-11* - P - 00400 100 Building a 400 ft 121.92 m 23129 - XX - P - 00YYY XX 00YYY XX= No. of conductors: 20, 25, 26, 34, 40, 50, 60, 68, 80, 100 (100 = 11*) YYY = (ft.): 100, 400 Example 1 23113-10 - P - 00100 10 Example 2 23113-11* - P - 00400 100 Building a 400 ft 121.92 m 23113- XX - P - 00YYY XX 00YYY XX= No. of conductors: 20, 25, 26, 34, 40, 50, 60, 68, 80, 100 (100 = 11*) YYY = (ft.): 100, 400 Width:.500 in (12.7 mm) Span:.475 in (12.1 mm) Width: 2.50 in (63.5 mm) Span: 2.475 in (62.85 mm) Width: XX *.025 in Span: XX *.025 in -.025 Width: 0.250 in (6.35 mm) Span: 0.225 in (5.72 mm) Width: 2.50 in (63.5 mm) Span: 2.475 in (62.85 mm) Width: XX *.025 in Span: XX *.025 in -.025 Also available: 20009/xx for 31 AWG stranded SPC, 20021/xx for 32 AWG stranded SPC, and 20034/xx for 32 AWG solid SPC. Other conductor counts and put-ups available upon request. 6 Microzip PVC Solid & Stranded

IBBON Ribbon Stranded PVC 0.033 inch (0.845 mm) & 0.039 inch (1 mm) UL Style: 2678 / 2651 CSA Style: AWM I A/B FT- 1 UL Temp: 105 C CSA Voltage Rating: 150V/300V UL2678: 150V, UL2651: 300V CSA Temp: 105 C P.027.002 Easy IDC termination Pitch tolerance.002 inches ( 0.050 mm) 0.0333 (.845 mm) and 1mm pitch for hard drives Solid electrical performance in a low cost design Manufactured with 30 and 28 AWG stranded tinned copper APPLICATIONS Disk drives REACH and RoHS 2 compliant PHYSICAL CONSTRUCTION DESCRIPTION HCA s series 23124, 23147 and 20057 are constructed with stranded tinned copper. are fully extruded with flexible gray PVC compound. 23147 Pitch: 0.039 in (1.0 mm) 23147 - XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 10.03 (32.89) (G-S-G) pf/ft (pf/m): 16.71 (54.8) Impedance (G-S-G) SE - Single End: 100 ohms (G-S) Differential: 140 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.46 (4.78) Maximum Skew ns/ft (ns/m): 0.025 (0.082) 20057 Pitch: 0.039 in (1.0 mm) 20057 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.40) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 12.3 (40.3) (G-S-G) pf/ft (pf/m): 22.1 (72.4) Impedance (G-S-G) SE - Single End: 90 ohms (G-S) Differential: 125 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.46 (4.78) Maximum Skew ns/ft (ns/m): 0.050 (0.164) Example 1 23147-44 - P - 00100 44 Example 2 23147-50 - P - 00100 50 Building a 23147 - XX - P - 00YYY XX 00YYY XX= No. of conductors: 10, 20, 34, 40, 50 YYY = (ft.): 100 Example 1 20057-10 - P - 00100 10 Example 2 20057-50 - P - 00100 50 Building a 20057 - XX - P - 00YYY XX 00YYY XX= No. of conductors: 96, other conductor counts available upon request YYY = (ft.): 100 Width: 1.100 in (27.94 mm) Span: 1.075 in (27.30 mm) Width: 1.250 in (31.75 mm) Span: 1.225 in (31.11 mm) Width: XX *.039 in Span: XX*.039 in -.039 Width: 0.250 in (6.30 mm) Span: 0.225 in (5.72 mm) Width: 2.00 in (50.80 mm) Span: 1.975 in (50.16 mm) Width: XX *.039 in Span: XX*.039 in -.039 23124 Pitch: 0.033 in (0.845 mm) 23124 - XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 14.4 (47.23) (G-S-G) pf/ft (pf/m): 22.5 (73.8) Impedance (G-S-G) SE - Single End: 89.3 ohms (G-S) Differential: 136.2 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.57 (5.14) Maximum Skew ns/ft (ns/m): 0.06 (0.19) Example 1 23124-96 - P - 00100 96 Building a 23124 - XX - P - 00YYY XX 00YYY XX= No. of conductors: 96, other conductor counts available upon request YYY = (ft.): 100 Width: 2.400 in (60.96 mm) Span: 2.375 in (60.32 mm) Width: XX *.033 in Span: XX*.033 in -.033 Other conductor counts and put-ups available upon request. All data is for reference only and is subject to change. Ribbon Stranded PVC 7

RAINBOW P Rainbow Ribbon UL Style: 20012 UL Voltage Rating: 150V 0.050 inch (1.27 mm) UL Temp: 80 C Pitch tolerance 0.003 inches (.0762mm) PVC insulated conductors Intermittently heat bonded increases flexibility Bonded section repeats every 6.25 inches (158.75 mm) IDC termination section 1.25 inches (31.75 inches) wide.035.005 APPLICATIONS Internal wiring of appliances, electronic computers or business equipment.050.003 PHYSICAL CONSTRUCTION DESCRIPTION This 0.050 inch (1.27 mm) flat Rainbow Ribbon cable is constructed with individually extruded 28 AWG (7/36 stranded TC). All primaries are then pulled parallel and bonded intermittently (BI). Color sequence: ten unique colors: Brown, Red, Orange, Yellow, Green, Blue, Violet, Gray, White, Black and repeat. 23104 Pitch: 0.050 in (1.27 mm) 23104 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC- BI Conductor Resistance ohms/1000 ft (ohms/km): 69.5 (227.96) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 10.9 (35.752) (G-S-G) pf/ft (pf/m): 17.3 (56.744) Impedance (G-S-G) SE - Single End: 90 ohms (G-S) Differential: 126 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.55 (5.08) Maximum Skew ns/ft (ns/m): 0.050 (0.164) Example 1 23104-10 - P - 00200 10 Example 2 23104-60 - P - 00200 60 Building a 23104- XX - P - 00YYY 200 ft 60.96 m 200 ft 60.96 m XX 00YYY Width: 0.250 in (6.30 mm) Span: 0.225 in (5.72 mm) Width: 1.500 in (38.10 mm) Span: 1.475 in (37.46 mm) Width: XX *.050 in Span: XX*.050 in -.050 XX= No. of conductors: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 YYY = (ft.): 200 Other conductor counts and put-ups available upon request. Other variations include 30 AWG and 26 AWG (20074) cables. PVC - BI: Intermittently Heat bonded PVC insulated wires with no lamination tapes. Spacing between bonded section is 6.25 inches (158.75 mm) UL Style: 20932 CSA listing: AWM I A/B FT-1 UL Voltage Rating: 300V CSA Voltage Rating: 300V UL Temp: 105 C CSA Temp: 105 C Pitch tolerance 0.003 inches (.0762mm) Continuous bonded. Individually color coded conductors for easy identification in discrete wire termination.036 +.002 -.001 Fully extruded construction. No lamination tapes to impede termination Well centered conductors ensure reliable IDC termination.050.003 APPLICATIONS Internal wiring of electronic equipment 23026 Pitch: 0.050 in (1.27 mm) 23026 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: SR-PVC/PVC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 7.48 (24.53) (G-S-G) pf/ft (pf/m): 14.05 (46.08) Impedance (G-S-G) SE - Single End: 98 ohms (G-S) Differential: 135 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.45 (4.75) Maximum Skew ns/ft (ns/m): 0.086 (0.28) Example 1 23026-09 - P - 00100 9 Example 2 23026-64 - P - 00100 64 Building a 23026- XX - P - 00YYY XX 00YYY Width: 0.225 in (5.71 mm) Span: 0.200 in (5.08 mm) Width: 1.60 in (40.64 mm) Span: 1.575 in (40.00 mm) Width: XX *.050 in Span: XX*.050 in -.050 XX= No. of conductors: 09, 10, 14, 15, 16, 20, 24, 25, 26, 34, 37, 40, 50, 60, 64 YYY = (ft.): 100 Other conductor counts and put-ups available upon request. Available in 26 AWG (20002) and 30 AWG (20042). 8 Rainbow Ribbon

VC PVC Stranded & Hi-Flex 7 and 19 Strand 0.050 inch (1.27 mm) UL Style: 2651 CSA listing: AWM I A/B FT-1 UL Voltage Rating: 300V CSA Voltage Rating: 300V UL Temp: 105 C CSA Temp: 105 C.050.002.035.002 Symmetrical profile offers easy conductor separation (zip) without cable damage and allows reverse termination 0.050 inch (1.27mm) pitch for use with today s low cost IDC connectors Design for use with high speed automated termination equipment APPLICATIONS Internal wiring of electronic equipment PHYSICAL CONSTRUCTION DESCRIPTION 23100 is extruded gray PVC flat planar cable using 28 AWG (7/36) tinned copper, on 0.050 inch (1.27mm) centers. 23108 is Hi-Flex extruded gray PVC flat planar cable using 28 AWG stranded (19/40) tinned copper, 0.050 inch (1.27 mm) centers. Conductor number one is marked with a red polarity stripe. 23100 Standard Flex Pitch: 0.050 in (1.27 mm) 23100 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 8.90 (29.19) (G-S-G) pf/ft (pf/m): 14.0 (45.92) Impedance (G-S-G) SE - Single End: 105 ohms (G-S) Differential: 145 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.40 (4.59) Maximum Skew ns/ft (ns/m): 0.035 (0.114) Example 1 23100-06 - P - 00100 10 Example 2 23100-64 - P - 00100 60 Building a 23100- XX - P - 00YYY XX 00YYY XX= No. of conductors: 6, 9, 10, 12, 14, 15, 16, 20, 24, 25, 26, 30, 34, 36, 37, 40, 50, 60, 64 YYY = (ft.): 100 Width: 0.250 in (6.30 mm) Span: 0.225 in (5.72 mm) Width: 1.500 in (38.10 mm) Span: 1.475 in (37.46 mm) Width: XX *.050 in Span: XX*.050 in -.050 23108 Hi-Flex Pitch: 0.050 in (1.27 mm) 23108 - XX - P - 00YYY Conductor AWG: 28 19/40 AWG TC Conductor Resistance ohms/1000 ft (ohms/km): 63.1 (206.96) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 8.36 (27.42) (G-S-G) pf/ft (pf/m): 15.75 (51.66) Impedance (G-S-G) SE - Single End: 101 ohms (G-S) Differential: 142 ohms Propagation Delay Nanoseconds/ft (ns/m): 2.90 (9.51) Maximum Skew ns/ft (ns/m): 0.050 (0.164) Example 1 23108-10 - P - 00100 10 Example 2 23108-50 - P - 00100 50 Building a 23108- XX - P - 00YYY XX 00YYY XX= No. of conductors: 10, 20, 26, 34, 40, 50 YYY = (ft.): 100 Width: 0.250 in (6.30 mm) Span: 0.225 in (5.72 mm) Width: 1.250 in (31.75 mm) Span: 1.225 in (31.11 mm) Width: XX *.050 in Span: XX*.050 in -.050 Other conductor counts and put-ups available upon request. Available in tinned overcoat copper (20069), 30 AWG Solid TC (20052), 28 solid TC (23197), and 26 AWG stranded TC (23043). Other Putup lengths possible. Contact factory for details. PVC Stranded and High-Flex 9

PO TPO Stranded Flat Ribbon UL Style: 20346 CSA listing: AWM I A/B FT-1 UL Voltage Rating: 300V CSA Voltage Rating: 300V UL Temp: 105 C CSA Temp: 105 C 0.050 inch (1.27 mm) L TPO insulated for superior electrical performance, i.e. high impedance and low capacitance Outstanding low temperature characteristics Improved heat aging over conventional PVC Available in other wire sizes APPLICATIONS Ideal for higher controlled impedance signals.050.002.035.002 PHYSICAL CONSTRUCTION DESCRIPTION This 0.050 inch (1.27mm) flat ribbon cable is constructed with 28 AWG stranded tinned copper then fully extruded with a Thermoplastic Olefin (TPO). A red stripe is applied for polarity identification. 23065 Pitch: 0.050 in (1.27 mm) 23065 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: TPO Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 5.60 (18.3) (G-S-G) pf/ft (pf/m): 9.70 (31.81) Impedance (G-S-G) SE - Single End: 106 ohms (G-S) Differential: 145 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.26 (4.13) Maximum Skew ns/ft (ns/m): 0.020 (0.065) Example 1 23065-20 - P - 00100 20 Example 2 23065-50 - P - 00100 50 Building a 23065- XX - P - 00YYY XX 00YYY XX= No. of conductors: 20, 34, 40, 50 YYY = (ft.): 100 Width: 0.500 in (12.70 mm) Span: 0.475 in (12.06 mm) Width: 1.250 in (31.75 mm) Span: 1.225 in (31.11 mm) Width: XX *.050 in Span: XX*.050 in -.050 Other conductor counts and put-ups available upon request. Other variations include 24 AWG and 26 AWG cables. 10 TPO Stranded Flat Ribbon

SZH Solid Microzip Low Smoke Zero Halogen (LSZH) 0.025 inch (0.635 mm) UL Style: 20930 (Pending) CSA Style: AWM I A/B FT- 1 UL Voltage Rating: 30V CSA Voltage Rating: 30V UL Temp: 105 C CSA Temp: 105 C Pitch 025 (0.635 mm) 0.0016. Low smoke zero halogen polyolefin thermoplastic ECO friendly.025.0016.027.002 APPLICATIONS Ultra ATA 33, 66, 100 and 133. Internal wiring of electronic equipment REACH and RoHS 2 compliant PHYSICAL CONSTRUCTION DESCRIPTION This Microzip consists of 30 AWG solid bare copper. Each leg of copper is pulled in parallel and fully extruded. A polarity stripe is co-extruded into position number one for easy identification. Color is green with black polarity. 20103 Pitch: 0.025 in (0.635 mm) 20103 - XX - P - 00YYY Conductor AWG: 30 1/30 AWG BC Insulation: LSZH Conductor Resistance ohms/1000 ft (ohms/km): 104 (341.12) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 12.5 (41.01) (G-S-G) pf/ft (pf/m): 22.0 (72.17) Impedance (G-S-G) SE - Single End: 80 ohms (G-S) Differential: 130 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.60 (5.25) Maximum Skew ns/ft (ns/m): 0.060 (0.196) Other conductor counts and put-ups available upon request. All data is for reference only and is subject to change. Example 1 20103-68 - P - 00400 68 Example 2 20103-80 - P - 00400 60 Building a 400 ft 121.92 m 400 ft 121.92 m 20103- XX - P - 00YYY XX 00YYY XX= No. of conductors: other conductor counts available upon request YYY = (ft.): 400 Width: 1.700 in (43.18 mm) Span" 1.675 in (42.54 mm) Width: 1.500 in (38.10 mm) Span: 1.475 in (37.46 mm) Width: XX *.050 in Span: XX*.050 in -.050 Stranded Ribbon Low Smoke Zero Halogen (LSZH) 0.050 inch (1.27 mm) UL Style: 20930 (Pending) CSA listing: AWM I A/B FT-1 UL Voltage Rating: 30V CSA Voltage Rating: 30V UL Temp: 105 C CSA Temp: 105 C Symmetrical profile offers easy conductor separation without cable damage and allows reverse termination.050.002.035.002 0.050 inch (1.27mm) pitch for use with today s low cost IDC connectors Design for use with high speed automated termination equipment APPLICATIONS Internal wiring of electronic equipment 20097 Pitch: 0.050 in (1.27 mm) 20097 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 12.5 (41.01) (G-S-G) pf/ft (pf/m): 7.5 (24.60) Impedance (G-S-G) SE - Single End: 95 ohms (G-S) Differential: 135 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.60 (5.25) Maximum Skew ns/ft (ns/m): 0.060 (0.196) Other conductor counts and put-ups available upon request. Available in tinned overcoat copper (20069), 30 AWG Solid TC (20052), 28 solid TC (23197), and 26 AWG stranded TC (23043). Other Put-up lengths possible. Contact factory for details. Example 1 20097-06 - P - 00100 6 Example 2 20097-64 - P - 00100 64 Building a 20097- XX - P - 00YYY XX 00YYY XX= No. of conductors: 06, 09, 10, 12, 14, 15, 16, 20, 24, 25, 26, 30, 34, 36, 37, 40, 50, 60, 64 YYY = (ft.): 100 Width: 0.150 in (3.81 mm) Span: 0.125 in (3.17 mm) Width: 1.60 in (40.64 mm) Span: 1.575 in (40.00 mm) Width: XX *.050 in Span: XX*.050 in -.050 Solid & Stranded Microzip Low Smoke Zero Halogen 11

IDE PITCHS PVC Stranded Wide Pitch Ribbon 0.100 inch (2.54 mm) 0.156 Inch (3.96 mm) UL Style: 2651 CSA listing: AWM I A/B FT-1 UL Voltage Rating: 300V CSA Voltage Rating: 300V UL Temp: 105 C CSA Temp: 105 C Rounded edge construction Dual zip construction between each web Multiple gauges available to meet your specific needs Alternate copper coatings and configurations available APPLICATIONS Internal wiring of electronic equipment 0.156 inch (3.96mm) Multiple wire sizes available Well centered conductors ensure reliable IDC termination APPLICATIONS Internal wiring of electronic equipment.100.003.012.003 POLARITY STRIPE ON #1 COND EDGE. T PHYSICAL CONSTRUCTION DESCRIPTION Flat planar cable using 22, 24, or 26 AWG stranded tinned copper, extruded in PVC on 0.100 inch (2.54 mm) centers. Conductor number one is marked with a polarity stripe. Standard cable color is gray. 23232-XX-P-00YYY 23224-XX-P-00YYY 23225-XX-P-00YYY 20008-XX-P-00YYY 23261-XX-P-00YYY 23236-XX-P-00YYY 20028-XX-P-00YYY 20027-XX-P-00YYY 20026-XX-P-00YYY 20029-XX-P-00YYY 23198-XX-P-00YYY 20017-XX-P-00YYY Conductor 26 AWG (7/34) TC 24 AWG (7/32) TC 22 AWG (7/30) TC 22 AWG (7/30) TC 20 AWG (7/28) TC 18 AWG (19/30) TC 26 AWG (7/34) TTC 24 AWG (7/32) TTC 22 AWG (7/30) TTC 22 AWG (7/30) TTC 20 AWG (7/28) TTC 18 AWG (19/30) TTC Conductor Resistance Ohms/1000 Ft Nominal @ 20 deg C (Ohms/Km) Capacitance pf/ft (pf/m) Impedance (Ohms) G-S-G 42.5 (139.4) 12 (39.36) 150 25.7 (84.2) 13 (42.64) 130 15.0 (49.2) 12 (39.36) 115 16.8 (55.1) 10 (32.8) 160 10.3 (33.78) 11 (36.08) 140 6.07 (19.9) 10 (32.8) 125 43.1 (141.3) 12 (39.36) 150 26.5 (86.92) 13 (42.64) 130 15.0 (49.2) 12 (39.36) 115 16.8 (55.1) 10 (32.8) 160 10.3 (33.78) 12.6 (41.32) 127 6.07 (19.9) 10 (32.8) 125 Pitch Inch mm 0.100 in Width: 0.650 in (16.51 mm) 2.54 mm Span: 0.625 in (15.87 mm) 0.100 in Width: 0.600 in (15.24 mm) 2.54 mm Span: 0.575 in (12.60 mm) 0.100 in Width: 0.550 in (13.97 mm) 2.54 mm Span: 0.525 in (13.33 mm) 0.156 in Width: 0.550 in (13.97 mm) 3.96 mm Span: 0.525 in (13.33 mm) 0.156 in Width: 0.500 in (12.70 mm) 3.96 mm Span: 0.475 in (12.06 mm) 0.156 in Width: 0.450 in (11.43 mm) 3.96 mm Span: 0.425 in (10.79 mm) 0.100 in Width: 0.650 in (16.51 mm) 2.54 mm Span: 0.625 in (15.87 mm) 0.100 in Width: 0.600 in (15.24 mm) 2.54 mm Span: 0.575 in (12.60 mm) 0.100 in Width: 0.550 in (13.97 mm) 2.54 mm Span: 0.525 in (13.33 mm) 0.156 in Width: 0.550 in (13.97 mm) 3.96 mm Span: 0.525 in (13.33 mm) 0.156 in Width: 0.500 in (12.70 mm) 3.96 mm Span: 0.475 in (12.06 mm) 0.156 in Width: 0.450 in (11.43 mm) 3.96 mm Span: 0.425 in (10.79 mm) Building a Pitch: 0.100in (2.54mm) Part #- XX - P - 00YYY XX OOYYY Building a Pitch: 0.156in (3.96mm) Part #- XX - P - 00YYY XX OOYYY XX= No. of conductors (see table at right for conductor count availability) YYY = (ft.): 100, 500 TC= Tinned TTC = Tinned Topcoated Width: XX *.100 in Span: XX*.100 in -.100 Width: XX *.156 in Span: XX*.156 in -.156 23232, 23244, 23245, 20008, 23261, 23236, 20028, 20027, 20026, 20029, 23198, 20017 Insulation: PVC Propagation Delay Nanoseconds/ft (ns/m): 1.35 (4.42) 23232 Conductor (XX) Count Options: 04, 06, 08, 10, 12, 14, 16 23244 Conductor (XX) Count Options: 05, 06, 07, 08, 10, 28 23245 Conductor (XX) Count Options: 03, 04, 09, 10 20008 Conductor (XX) Count Options: 03, 04, 09, 10 23261 Conductor (XX) Count Options: 04, 05, 10 23236 Conductor (XX) Count Options: 02, 03, 04, 06, 07, 08, 15, 24 20028 Conductor (XX) Count Options: 03, 04, 05, 06, 10, 11, 12, 14, 16, 24 20027 Conductor (XX) Count Options: 10, 12 20026 Conductor (XX) Count Options: 03, 04, 07, 10, 14, 28 20029 Conductor (XX) Count Options: 06, 08, 10, 16, 20, 24 23198 Conductor (XX) Count Options: 10, 12, 15, 18, 24 20017 Conductor (XX) Count Options: 07, 10, 24 12 PVC Stranded Wide Pitch Ribbon

HIELDED Shielded and Jacketed Flat Ribbon UL Listing: 2912 UL Temp: 105 C UL Voltage Rating: 150V Shielded flat ribbon cable for EMI/RFI/ESD considerations Two drain wires for insured grounding Cable core features our popular 0.050 inch (1.27mm) pitch ribbon cable for ease of termination with most IDC connectors Choose from a wide selection of conductor counts APPLICATIONS Ideal for environments where EMI/RFI/ESD may be an issue.115.015.035.002.050.002 PHYSICAL CONSTRUCTION DESCRIPTION Using HCA 23100 (page 9) for the core of this shielded cable, two 28 AWG (7/36 TC) drain wires are pulled in separate to ensure contact with the Aluminum/Polyester tape (AL side in). The core is jacketed in Black PVC*. 23102 23012 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC Shield Construction Drain / Tape Shield: AL/PET Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 20 (58) Impedance (G-S-G): 70 ohms Example 1 23012-14 - P - 00100 14 Example 2 23012-34 - P - 00100 34 Building a 23012- XX - P - 00YYY XX 00YYY XX= No. of conductors: 14, 15, 16, 20, 25, 26, 34 YYY = (ft.): 660 Width: 0.350 in (8.89 mm) Span: 0.325 in (8.25 mm) Width: 0.850 in (21.59 mm) Span: 0.825 in (20.95 mm) Width: XX *.050 in Span: XX*.050 in -.050 *Standard jacket color is Black. Other colors are available upon request. Other conductor counts and put-ups available upon request. Shielded and Jacketed Flat Ribbon 13

ROCESS Flat Cable Manufacturing Process M The Process Flat ribbon cable requires more than sophisticated tooling, high quality plastics, and the latest extrusion equipment. It also requires a variety of measurement devices to help us verify tightly-controlled ribbon dimensions and plastic thicknesses to meet the UL voltage requirements. Non-contact laser measurement of ribbon dimensions provides production operators and feedback systems with results hundreds of times per second. Also, as part of in-line testing procedure, we continuously apply high voltage to the cable during manufacturing. This process allows us to better monitor the quality of the cable produced and ensure proper quality control. Quality personnel look at the structure of the ribbon cable s plastic web to ensure that wires can be separated by the customer. Our visual inspection system can detail the structure of the entire cross-section of a wide ribbon cable, allowing inspectors to see the product at great magnification where necessary. The Hitachi Difference With trained operators, the right equipment and sophisticated quality support, you can rest assured that Hitachi Cable will meet and exceed your flat cable needs. 14 Flat Cable Manufacturing Process

MQT QT Summary Sheet PVC UL/cUL Listing: 20528 TPO UL/cUL Listing: 21057 PVC UL/cUL Voltage: 150V TPO UL/cUL Voltage: 150V PVC UL/cUL Temp: 105 C TPO UL/cUL Temp: 90 C PVC UL/cUL Flame Rating: VW-1 TPO UL/cUL Flame Rating: Call Heat bonded construction providing tight pitch control Contoured flat sections for ease of IDC termination Non-laminated versions allow for bundling to reduce resistance to air flow Stranded construction for greater flexibility and flex life Solid copper constructions also available Suitable for SE, MSE, LVD and MLVD applications Ask about our products SCSI NEXZ designed for Ultra 320 REACH and RoHS 2 compliant HCA Short Description HCA Series No. Bond Length inch (mm) Conductor AWG Stranding Coating Insulation Span of Flat to Flat Inch (mm) Ground-Signal (G-S) pf/ft (pf/m) Diff. Capacitance Impedance Propagation Delay Ground-Signal (G-S-G) pf/ft (pf/m) SE (G-S-G) (Ohms) SE - Single End (G-S) (Ohms) Diff. Nanoseconds/ft (ns/m) Max. Skew ns/ft (ns/m) Page MQT TPO MQT TPO DLMQT 23195 1.57 (40) 30 9.84 (250) 14.9 (48.88) 18.9 (62.00) 91 117 1.56 (5.12) 35 (114.8) 16 7/38 PVC 20050 1.57 (40) TC 4.92 (125) 14.6 (47.89) 19.2 (62.99) 82 113 1.52 (4.99) 35 (114.8) 16 20062 1.57 (10) 30 9.84 (250) 10.3 (33.79) 13.3 (43.63) 95 120 1.56 (5.12) 35 (114.8) 17 7/38 TPO 20051 1.57 (40) TC 4.92 (125) 10.8 (35.43) 14.8 (48.55) 90 115 1.56 (5.12) 35 (114.8) 17 20089 1.57 (40) 30 9.84 (250) 10.4 (34.12) 14.0 (45.93) 88 117 1.56 (5.12) 35 (114.8) 17 7/38 TPO 20096 1.98 (50) TC 5.24 (133) 11.0 (34.12) 15.0 (49.21) 86 115 1.56 (5.12) 35 (114.8) 17 Note 1: MQT is Micro Quick-Twist cable that is a twisted pair cable with bonded sections on 0.025 inch (0.635 mm) pitch with no lamination tape. Note 2: A span is the combination of one bonded section and one twisted section. Note 3: HCA offers custom span cables with either 40 or 50mm bonded sections with up to a maximum of 7 different lengths of twisted pair sections before the pattern repeats. Note 4: Other fixed spans available. MQT Summary 15

QT Micro Quick-Twist PVC Stranded 0.025 inch (0.635 mm) M UL/cUL Listing: 20528 UL/cUL Temp: 105 C UL/cUL Voltage: 150V UL/cUL Flame Rating: VW-1 Pitch tolerance.002 inches (.050 mm) Reduced noise and crosstalk Ideal for IDC termination with high-density connectors Great alternative to fully extruded FEP and TPO ribbon cable APPLICATIONS SCSI, Fast-XX, SPI-2 and SPI-3.025.002.026.002 PHYSICAL CONSTRUCTION DESCRIPTION HCA Micro Quick-Twist is built with 30 AWG stranded tinned copper. Each conductor is individually extruded with PVC. are pulled into pairs then bonded into flat sections for Insulation Displacement Connector (IDC) termination points. A Bonding Method requiring no lamination tape (NL) is used on the flat sections of 23195 and 20050 and the Dual Lamination Tape Bonding Method (DL) is used on 20098 and 20099. 23195 Pitch: 0.025 in (0.635 mm) 23195 - XX - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC-NL Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.68) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 14.9 (48.87) (G-S-G) pf/ft (pf/m): 18.9 (91.992) Impedance (G-S-G) SE - Single End: 91 ohms (G-S) Differential: 117 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.56 (5.116) Maximum Skew ns/ft (ns/m): 0.035 (0.114) Example 1 23195-26 - P - 00200 26 200 ft 60.96 m Example 2 23195-11* - P - 00200 100 200 ft 60.96 m Building a 23195- XX - P - 00YYY XX 00YYY XX= No. of conductors: 26, 34, 50, 68, 80, 100 (100 = 11*) YYY = (ft.): 200 Width: 0.650 in (16.51 mm) Span: 0.625 in (15.87 mm) Width: 2.50 in (63.5 mm) Span: 2.475 in (62.85 mm) Width: XX *.025 in Span: XX *.025 in -.025 20050 Pitch: 0.025 in (0.635 mm) 20050-68 - P - 00YYY Conductor AWG: 30 7/38 AWG TC Insulation: PVC-NL Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.6) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 14.6 (47.88) (G-S-G) pf/ft (pf/m): 19.2 (62.97) Impedance (G-S-G) SE - Single End: 82 ohms (G-S) Differential: 113 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.52 (4.98) Maximum Skew ns/ft (ns/m): 0.035 (0.114) Example 1 20050-68 - P - 00200 68 200ft 60.96 m Building a 20050- XX - P - 00YYY XX 00YYY XX= No. of conductors: 96, other conductor counts available upon request YYY = (ft.): 200 *DL version available, part number 20098-XX-P-00YYY, 20099-XX-P-00YYY Width: 1.700 in (43.18 mm) Span" 1.675 in (42.54 mm) Width: XX *.025 in Span: XX *.025 in -.025 Other conductor counts and put-ups available upon request. Standard multicolor is Red, White, Blue, White, Blue, White, Blue, White, Blue, White, repeat. PVC - DL: Heat bonded PVC insulated wires with dual lamination tapes. PVC - NL: Heat Bonded PVC insulated wires with no lamination tapes. 16 Micro Quick-Twist PVC Stranded

QT Micro Quick-Twist TPO Stranded & Solid 0.025 inch (0.635 mm) UL/cUL Listing: 21057 UL/cUL Temp: 90 C UL/cUL Voltage: 150V UL/cUL Flame Rating: VW-1.025.002.026.002 Pitch tolerance.002 inches (.050 mm) Excellent noise and crosstalk reduction characteristics Ideal for IDC termination with high density connectors UL approved APPLICATIONS Internal hard drives, SCSI, SPI, SPI-2, SPI-3, SPI-4, and U1 and U2 servers U320 LVD and SE applications Compliant for SCSI Fast-XX, SPI-2, SPI-3 U160 LVD, SPI-4 20098, 20051, 20188, 20187, 20095, 20089, 20096, 20090 Conductor Count: 68 : 200 (60.96 m) Conductor AWG: 30 7/38 AWG TC Insulation: TPO-NL Conductor Resistance ohms/1000 ft (ohms/km): 106 (347.6) PHYSICAL CONSTRUCTION DESCRIPTION HCA TPO Micro Quick-Twist is built with 30 AWG stranded or solid tinned copper. Each conductor is individually extruded with TPO. are pulled into pairs then bonded into flat sections for Insulation Displacement Connector (IDC) termination points. A Bonding Method requiring no lamination tape (NL) is used on the flat sections of 20051 and 20062 and the Dual Lamination Tape Bonding Method (DL) is used on 20089, 20090. 20095, 20096, 20187 and 20188. Ground-Signal (G-S) pf/ft (pf/m) Capacitance Impedance Propagation Delay Ground-Signal (G-S-G) pf/ft (pf/m) (G-S-G) SE - Single End (G-S) Differential Nanoseconds/ft (ns/m) (ns/m) Maximum Skew ns/ft (ns/m) 20062-68 -P-00200 10.3 (33.78) 13.0 (42.64) 95 ohms 120 ohms 1.56 (5.116) 0.035 (0.114) 20051-68-P-00200 10.8 (35.78) 14.0 (45.92) 95 ohms 120 ohms 1.56 (5.116) 0.035 (0.114) 20088-68-P-00200 11.0 (36.08) 16.5 (54.12) 86 ohms 125 ohms 1.45 (4.756) 0.025 (0.082) 20087-68-P-00200 11.0 (36.08) 16.5 (54.12) 86 ohms 125 ohms 1.45 (4.756) 0.025 (0.082) 20095-68-P-00200 10.4 (34.11) 14.0 (45.92) 88 ohms 120 ohms 1.56 (5.116) 0.025 (0.082) 20089-68-P-00200 10.0 (32.8) 14.0 (45.92) 88 ohms 117 ohms 1.50 (4.92) 0.025 (0.082) 20096-68-P-00200 11.0 (36.08) 15.0 (49.2) 86 ohms 115 ohms 1.56 (5.116) 0.035 (0.114) 20090-68-P-00200 11.0 (36.08) 15.0 (49.2) 86 ohms 115 ohms 1.56 (5.116) 0.035 (0.114) Width Span Width: 1.700 in (43.18 mm) Span: 1.675 in (42.54 mm) Width: 1.700 in (43.18 mm) Span: 1.675 in (42.54 mm) Width: 1.700 in (43.18 mm) Span: 1.675 in (42.54 mm) Width: 1.700 in (43.18 mm) Span: 1.675 in (42.54 mm) Width: 1.700 in (43.18 mm) Span: 1.675 in (42.54 mm) Width: 1.700 in (43.18 mm) Span: 1.675 in (42.54 mm) Width: 1.700 in (43.18 mm) Span: 1.675 in (42.54 mm) Width: 1.700 in (43.18 mm) Span: 1.675 in (42.54 mm) Standard multicolor is Red, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, Blue, Light Yellow, repeat for all stranded constructions. TPO - DL: Heat bonded TPO insulated wires with dual lamination tapes. TPO - NL: Heat Bonded TPO insulated wires with no lamination tapes. Micro Quick-Twist TPO Stranded 17

OUND Round to Flat Ribbon S UL/CSA Listing: (UL) CM c(ul) 105 C CSA Style: AWM llb, 300V, 105 C UL Style: 20381, 300V, 105 C Ref. OD PVC JACKET ALUMINUM / POLYESTER TAPE Available unshielded and double shielded W Shielded includes an aluminum tape and braid Cable core features our 0.050 inch (1.27 mm) pitch gray ribbon cable for use with popular IDC connectors. Core is slit 1.50 inch (38.1 mm) then bonded 0.75 inch (19.05 mm) for ease of termination BRAID SHIELD APPLICATIONS Internal and external wiring of electronic equipment and consumer products PHYSICAL CONSTRUCTION DESCRIPTION Cable core consists of slit and bonded flat gray ribbon cable. Core is folded and twisted into a round format before being taped with either Polyester (23149) or Aluminum/Polyester (23122) tape (Al side out). For dual shielded versions, cable is then braided. The core is jacketed in Black PVC.* 23122 23122 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC Shielding: Al/PET Tape & Braid Jacket: PVC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 24.5 (80.36) Impedance (G-S-G): 65 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.62 (5.31) Example 1 23122-16 - P - 00660 16 660 ft 201 m Example 2 23122-60 - P - 00660 60 660 ft 201 m Building a 23122- XX - P - 00YYY XX 00YYY XX= No. of conductors: 16, 20, 25, 26, 34, 37, 40, 50, 60 YYY = (ft.): 660 Width: 0.400 in (10.16 mm) Span: 0.375 in (9.52 mm) Width: 1.500 in (38.10 mm) Span: 1.475 in (37.46 mm) Width: XX *.050 in Span: XX*.050 in -.050 16 20 25 26 34 37 40 50 60 Jacket OD Inches mm 0.275 6.985 0.309 7.849 0.313 7.95 0.318 8.077 0.363 9.22 0.351 8.915 0.413 10.49 0.438 11.125 0.458 11.633 23149 23149 - XX - P - 00YYY Conductor AWG: 28 7/36 AWG TC Insulation: PVC Shielding: PET Tape Jacket: PVC Conductor Resistance ohms/1000 ft (ohms/km): 67.5 (221.4) Capacitance Ground-Signal (G-S) pf/ft (pf/m): 24.5 (80.36) Impedance (G-S-G): 90 ohms Propagation Delay Nanoseconds/ft (ns/m): 1.62 (5.31) Example 1 23149-16 - P - 00660 16 660 ft 201 m Example 2 23149-50 - P - 00660 50 660 ft 201 m Building a 23149- XX - P - 00YYY XX 00YYY XX= No. of conductors: 16, 20, 25, 26, 34, 37, 40, 50, 60 YYY = (ft.): 660 16 20 26 40 50 Width: 0.400 in (10.16 mm) Span: 0.375 in (9.52 mm) Width: 1.250 in (31.75 mm) Span: 1.225 in (31.11 mm) Width: XX *.050 in Span: XX*.050 in -.050 Jacket OD Inches mm 0.275 6.985 0.309 7.849 0.318 8.077 0.413 10.49 0.438 11.125 Other conductor counts and put-ups available upon request. This product is available in 30 AWG solid and stranded constructions. Please consult with factory for more information. *Standard jacket color is Black. Other colors are available by special request. 18 Round to Flat Ribbon

OLUTIONS Other Products by HCA HITACHI CABLE AMERICA INC. PREMISE & FIBER OPTIC CABLE CATALOG PREMISE & FIBER OPTIC CABLE CATALOG Premise & Fiber Optic Cable HCA has a long history of designing and manufacturing a complete line of high-performance copper and fiber optic communication cables including Category 6, 6A and 7 cables. Our dedication to engineering perfection is evident in the consistent quality and performance of all the cable products we manufacture. Cabling Solutions for Industrial Ethernet To accommodate a wide variety of applications, Hitachi Cable offers dozens of unique designs intended to meet your specific needs. From high-flex to static, solid conductor to stranded, high and low temperature, oil and chemical resistant, we have the right industrial Ethernet solution. Ultrasound. Medical. Inspection Interconnect Solutions Medical Cable Solutions Our medical core technologies include advanced material development, ultra-fine wire capability, MCX (Micro-Coaxial Cable) technology yields long flex-life with tight electrical parameter control (Micro twinax cable is also available), bundled cable with fine wire coaxials for customer specific designs and ultra-high density MCX cable designs deliver a soft, but robust, feel for customer applications. Coaxial & Mini-Coaxial Cable Hitachi Cable s coaxial cables are engineered with a wide selection of gauges and materials, with each offering the benefits for mechanical, electrical and cost consideration applications. Industrial applications include high power and environmentally rugged materials for use in robust applications. HCA Solutions 19

WORLDWIDE COVERAGE The Flat Cables in this catalog are designed and manufactured at our modern 300,000 square foot (27870.912 square meters) facility located in the East Industrial Park of Manchester, New Hampshire, USA. In addition to a full line of high performance Electronics Cables, Hitachi Cable manufactures a wide range of HCA Brand cables to meet the demands of diverse markets throughout the world. For complete information, please contact your local representative or our inside sales team at +1.800.772.0116 or +1.603.669.4347. 900 Holt Avenue, East Industrial Park Manchester, New Hampshire 03109 USA Tel: +1.603.669.4347 Sales: +1.800.772.0116 Fax: +1.603.669.9621 9/2016