Gibson 2015 Les Paul Standard Premium Quilt Additional Specifications New and Improved in 2015 Gibson G FORCE Tuning System: Faster, more accurate, additional tunings Zero Fret Adjustable Nut (patent applied for): Added action adjustment Upgraded Tune o matic bridge with titanium saddles: Ease of height adjustment and sustain Wider neck and fingerboard: Increased playing area with same string spacing Comprehensive wood selection and grading: Rarest and finest materials for best instruments Thicker Rosewood Fingerboard: Increased mass for sustain Abalone Inlays: Uniquely beautiful appearance Smoother sanded, buffed and oiled fingerboard: Improved playability and feel Comprehensive Setup (Lower Frets, Improved Plek, Intonation): Silky smooth action and bending, improved intonation Improved contact output jack: Secure contact and uninterrupted signal More robust cables: Stronger signal strength Removable Pickguard: Choice with no holes in body Les Paul 100th birthday signature: Honoring a genius with a facsimile of his actual signature taken from a pickguard autographed by Les. Les Paul Hologram: Authenticity and tribute New & Improved Hardshell Case: Improved protection (up to 15 foot drop), sleek, ergonomic, made in USA Body Top Back Wood Species: Quilted Maple Mahogany Pieces: 2 2 Grade (Top)/Density (Back): AAA Ultra Low Binding: Cream None Weight Relief: Tonal, Resonant, and/or Technical Effect: Body Contour/Carve: Modern Glue: Franklin Titebond 50 The modern weight relief removes more mahogany but retains the resonance Neck Enhanced
Neck Wood Species: Mahogany Pieces: 1 Truss Rod: Les Paul Profile: Slim Taper Asymmetrical Thickness at Fret 1: 20.32 mm /.800" Thickness at Fret 12: 22.225 mm /.875" Other Materials: Franklin Titebond 50 Tonal, Resonant, and/or Technical Effect: The mahogany asymmetrical slim taper neck provides a ergonomic feel for comfort and the mahogany adds a rich tonal quality Neck Fit Joint Angle: 5 Degrees Joint Angle Tolerance: 0 Deg 0 Min 15 Sec Type: Mortise and Tenon Adhesive: Franklin Titebond 50 Gauges Used: Pitch Height Gauge, Alignment Gauge Fingerboard Wood Species: Rosewood Pieces: 1 Shade: Dark Radius: Compound 25.4 cm 40.64 cm / 10" 16" Frets: 22 Nut/End of Board: 4.5993 cm / 1.795" @ Nut 5.9944 cm / 2.360 @ End of Board Scale: 62.865 cm / 24.75 Binding: Cream Side Dots (Color): Black Inlay Style: Trapezoid Inlay Material: Abalone Dimensions: From 16.51 mm x 29.718 mm / 0.66" x 1.17" to 6.096 mm x 39.624 mm / 0.24" x 1.56" Nut Style: Zero Fret Nut Material: Cryogenically Treated Brass Width: 4.5993 cm / 1.795" Slots: E: 1.4732 mm / 0.058 inches A: 1.2192 mm / 0.048 inches D: 0.9652 mm / 0.038 inches G: 0.7112 mm / 0.028 inches
B: 0.4826 mm / 0.019 inches e: 0.3556 mm / 0.014 inches Peghead Type: SP1-B Inlay: Abalone Peg Head Binding: None Logo: Abalone Gibson Silkscreen: Gold Les Paul 100 Headstock Angle: 17 Degrees Finishes Honeyburst Perimeter Candy Ocean Water Perimeter Candy Color Code: Y3 O3 Surface Texture: Smooth/ Hi Gloss 90 Sheen Lacquer Smooth/ Hi Gloss 90 Sheen Lacquer Filler: Walnut Walnut Sealer: 1 1.5 mils 1 1.5 mils Top: Yellow Candy Trans Pearl #KUS NIT 10068 GL, Ice Tea Pearl #KUS NIT 10134 Turquoise Pearl #KUS NIT 10135, Pacific Blue Pearl #KUS NIT 10133 Top Coat: Hi Gloss Lacquer/ 90 Sheen 7 8 mils Hi Gloss Lacquer/ 90 Sheen Scraped: Fingerboard Sides, Body and Nut Fingerboard Sides, Body and Nut Pickups Rhythm Lead Style: Rhythm BB Pro Lead BB Pro Winds/Coil: Screw side/slug side: 5000 / 5200 5300 / 5500 Material of Wire (gauge): Enamel (42) Enamel (42) Coil Dimensions (per coil): 6.6294 cm x 1.7272 mm / 2.61" x 0.68" 6.6294 cm x 1.7272 mm / 2.61" x 0.68" Coil Material: ABS ABS Coil Winding Process: Machine Wound Machine Wound Pole Piece Material: Nickel Plated Steel Nickel Plated Steel Pole Piece Position from Nut: 47.3075 cm / 18.625" 59.52998 cm / 23.437 inches Slug Material: Nickel Plated Steel Nickel Plated Steel Slug Dimensions (diameter x 4.7498 mm x 1.24206 cm / 0.187 x 0.489" 4.7498 mm x 1.24206 cm / 0.187 x 0.489" length): Magnet Material: Alnico V Alnico V Magnet Position from Nut: 48.26 cm / 19" 58.7375cm / 23.125" Magnet Dimensions: 6.35 cm x 1.27 mm / 2.5" x 0.5" 6.35 cm x 1.27 mm / 2.5" x 0.5" Polarities: Screw side is the south pole of magnet Screw side is the south pole of magnet Qfactor: 5.4 5.35 ResistanceDC: 7.64k ohms 7.98k ohms Resonant Frequency: 2863 Hz 2780 Hz Tonal & Resonant Advancements: Classic humbucker tone with historically "unmatched" bobbin windings for vintage humbucker tone with enhanced highs.
Electronics Control Pocket Assembly Lead Volume Rhythm Volume Type: 500K Non Linear Push/ Pull 500K Non Linear Push/ Pull Peak Voltage: 500V 500V Range: 0 500K 0 500K Power Rating: 1/4 watt above 100K ohms 1/4 watt above 100K ohms Resistance Tolerance: +/ 20% +/ 20% Minimum Resistance: 200 ohms 200 ohms Lead/Rhythm Tone Type: 500K Push/Pull Non Linear Peak Voltage: 500V Range: 0 500K Power Rating: 1/4 watt above 100K ohms Resistance Tolerance: +/ 20% Minimum Resistance: 200 ohms Capacitors: Lead Value/Rhythm.022 uf Hardware Tuning Keys/Tuning Key Details Style: G FORCE Material: Zamak Weight: 31.1845 gm / 1.1oz Tuning Ratio: 40:1 Gear Type: Synchronized spur gear system What is allowable turn: +/ 2 degrees Plating specs: Chrome Part numbers: 430 14299B / 430 14299T String Dimensions E: 1.1684mm / 0.046" A: 0.9144 mm / 0.036" D: 0.6604 mm / 0.026" G: 0.4064mm / 0.016" B: 0.2794mm / 0.011" e: 0.2286mm / 0.009" Bridge Style: Tune o matic w /Titanium saddles Material: Zamak base Plating Specs: Chrome Part number: 430 14384 Dimensions of String Slots Weight: 72.5748 gm / 2.56 oz E: 1.4732mm / 0.058" A: 1.2192mm / 0.048"
D: 0.9652mm / 0.038" G: 0.7112mm / 0.028" B: 0.4826mm / 0.019'' e: 0.3556mm / 0.014" Tailpiece Style: Stop Bar Compensated: No Material: Zamak Plating Specs: Chrome Part number: 430-10135 Weight: 82.21 gm / 2.9 oz Output Jack Style: 1/4" mono with dual tip contact Jack Plate Style: Les Paul Square Material: Brass Part Number: 430 19467 Weight: 6.0 gm / 0.21 oz Strap Buttons Material: Aluminum Plating Specs: None Part numbers: 430 19160 / 430 19160E Weight: 4.0 gm / 0.14 oz Plastics Pickguard Style: New Removable Cream Pickguard Part Number: 430 12509 Truss Rod Cover Style: Black and White Bell Hot Stamped White "Standard" Part Number: 430 19398 Knobs Style: Metal with Abalone Part Number: 440 72014 Yes/No: No Dial Pointers Control Plates(s) (Backplate Cover) Style: Stainless steel infused polycarbonate for Electrostatic Discharge Protection Part Number: 380 12209 Control Plates(s) (SwitchPlate Cover) Style: Stainless steel infused polycarbonate for Electrostatic Discharge Protection. Part Number: 380 12211
Switch Washer Style: Cream with hot stamp gold Part Number: 430 19293 Trim Rings Style: New Cream made for the removable pickguard (snaps & unsnaps into place) Part Number: 440 14001 / 440 14002 Accessories Case Style: Hard Shell Color: Gold Molded Strap Locks: No Truss Rod Wrench,.050 + Tools: 2.5mm Allen wrenches, G FORCE Charging Adapter Gibson USA Owner's and G Manual: FORCE QUICK START COA/Other: None