575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18 12 11 Length 575 576 2 13 12 25 14 57 Extremely robust, balanced weight distribution, high wear resistance, handles black atramentised, head polished. Pincers (cutting pliers) DIN/ISO 9243 Special tool steel, cutting edge oil-hardened. 57 Length 57 16 12 18 13 21 14 Length 57 225 15 25 16 3 17 571 Advantageous force transmission thanks to good lever action. Polished head. Handles black atramentised. Hardness of cutting edges approx. 59 HRC. For the disassembly of car-bodies. Car-body pliers (horse shoeing pliers) DIN 5173 Special tool steel, hardened in oil and tempered. 571 Length Head width Weight 571 g 3 2 785 11 5712 Rabitz pincers Optimum cutting performance through favourable leverage. Dip-coated handles. Special tool steel, oil-hardened, polished, blackened tip. 5712 Length 5712 22 11 25 12 28 13 572 Ground cutting edges, handles black atramentised, polished head. Rabitz pincers DIN/ISO 9242 Special tool steel, oil-hardened. 572 Length 572 2 11 22 12 25 13 Length 572 28 14 3 15 # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline +49 624 739-1217 57.1
Rabitz pincers Wire twisting pliers End cutting nippers Centre cutting nippers Diagonal cutting pliers 5725 High-leverage original tower pliers (rabitz pincers) DIN/ISO 9242 Particularly slim head and long legs, optimum cutting performance with minimum use of force due to high transfer, strong damping of the cutting impact after cutting the binding wire, thereby relieving tendons and muscles. For fastening concrete reinforcing steel, twisting and cutting wire from roll within one working step. Special tool steel, oil-hardened. 5725 11 Polished head, handles black atramentised. 5725 21 Head and handles nickel-plated. 5725 11 5725 21 Length up to wire Ø up to wire Ø Head width 5725 soft hard 3 4.5 3.5 25 11 3 4.5 3.5 25 21 575 Wire twisting pliers x Burnished, corrosion-proof, bright finished head. With additional cutting edge. Jaws bevelled to 3. Perfect for securing locations which are prone to suffer from vibrations. Quick and exact twisting, even stainless wires can be twisted. Suitable for any wire length, any twisting length and any number of rotations. Length up to wire Ø 575 max. 224 1.4 21 282 1.6 22 Vanadium-extra. 575 21 Serrated jaws. 575 22 With reversing automatic. The reversing automatic allows clockwise and counterclockwise twisting of the locking wire. The wire is twisted in one operation. When the reversing slider is in the centre position, it locks the twisting axis. Therefore, the pliers can be used as diagonal cutting pliers or grip pliers, as well. 575 21 575 22 5728-57211 High leverage end cutting nippers DIN/ISO 5748 5728-5721 For hardened steel wire (piano wire). Steel C 6, oil-hardened and tempered, 5728 Polished head, dip-coated handles. 5729 2-component grips with handguard. 57211 Polished head, PVC-coated handles. For piano wire and soft wire. Chrome-vanadium electric steel, oil-hardened, 57211 5728 5729 5721 5721 ß 2-ergosoft grips with handguard. ß Length up to wire Ø up to wire Ø up to wire Ø 5728 5729 5721 57211 medium hard piano 16 3.4 2.5 2. 12 16 3.5 2.5 2.2 12 12 12 2 4.2 3. 2.5 13 13 13 57.2 Fax order hotline +49 624 739-1217 in the catalogue. Purchase orders must be in units. # = partly extent in stock. a
5723 Polished head, PVC-coated handles. For hard and soft wire. Also suitable for braiding concrete reinforcing steel. End cutting nippers DIN/ISO 5748 Special tool steel, oil-hardened, Hardness of cutting edges approx. 61 HRC. 5723 Length up to wire Ø up to wire Ø up to wire Ø 5723 soft medium hard 16 4. 2.8 2.3 11 2 4. 3.5 2.8 13 5724 Lever end cutting nippers DIN/ISO 5749 Highest cutting performance thanks to double lever mechanism and opening spring. Black atramentised For hard wire. Tool steel C6, fully forged, oil-hardened. Cutting 5724 Length 5724 18 21 21 22 235 23 57268 Powerful, compact, comfortable. Polished head, PVC-coated handles. Good cutting capacity. Easier cutting thanks to high leverage ratio. For piano wire as well as for thick and soft wire, such as bolts and rivets. Lever-(Bolt-)end cutting nipper Vanadium electric steel, oil-hardened, cutting edges inductively hardened, hardness of cutting edges approx. 64 HRC. 57268 Length up to wire Ø up to wire Ø up to wire Ø up to wire Ø 57268 soft medium hard piano 2 1.-6. 4. 3.5 3. 11 5728 Centre cutting nipper Polished head, PVC-coated handles. With forged-in joint axis for the hardest, heaviest duty. These pliers can cut hard or thick wires with less effort than diagonal cutting pliers of the same length. With precision cutting edges for soft and hard wire as well as piano wire. Chrome-vanadium high-performance, forged, oil-hardened. Hardness of cutting edges approx. 64 HRC. 5728 Length Cu conductor Aluminium conductor up to wire Ø up to wire Ø up to wire Ø up to wire Ø 5728 up to 2 up to 2 soft medium hard piano 25 16 35 5. 5. 3.8 3.5 11 62141 Polished head, handles plastic-coated, with opening spring. With surface-ground cutting faces. Cutting edges additionally inductively hardened. Diagonal cutting pliers for fibre-optic cable Specially for cutting fibre-optic cable. Vanadium electric steel, hardened in oil and tempered. 62141 Length 62141 16 15 # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline +49 624 739-1217 57.3
Plastic cutters Diagonal cutting pliers 5739 Plastic cutters With opening spring. Polished head, PVC-coated handles, without chamfer. With surface ground cutting edge surface. For accurate cutting of sprues on plastic parts or soft materials, e.g. lead. Vanadium electric steel, oil-hardened. 5739 12-14 5739 15 Cutting edges Length 5739 straight 14 12 straight 16 13 straight 18 # 14 45 angled 16 15 85 angled 16 16 5742-57421 Long cutting edges for larger cut material. With precision stripping holes for (solid) conductors 1.5 and 2.5 2. Vanadium electric steel, oil-hardened, cutting Hardness of cutting edges approx. 6 HRC. 5742 Polished head, handles with thick-walled, bicolour, multi-component non-slip grips. Stripping-Diagonal cutting pliers Multi-purpose Cutting and stripping insulation 57421 Head chrome-plated, handles with thick, bicolour, multi-component non-slip grips, routine-tested in compliance with VDE DIN EN 69. VDE Length up to wire Ø Stripping performance 5742 57421 soft 2 / AWG 16 4. 1.5+2.5 / 15+13 11 11 5739 16 5742 57421 5743-57441 Diagonal cutting pliers DIN/ISO 5749 Special tool steel, oil-hardened and tempered, 5743 Polished head, dip-coated handles. 57433 2-component grips with handguard. 57437 ß 2-ergosoft grips with handguard. 57441 Head highly polished, chrome-plated, insulation handles (1 V) in compliance with VDE IEC 69 sprayed directly on handles, with 2-component non-slip grips. 57441 5743 57433 57437 ß VDE Length up to wire Ø up to wire Ø up to wire Ø 5743 57433 57437 57441 medium hard piano 125 2.3 1.5-11 12 14 2.5 1.8-13 12 14 21 16 2.8 2. - 15 22 16 3. 2.3 1.6 16 16 3.5 2.5 2. 16 18 3.8 2.7 2.2 16 17 57.4 Fax order hotline +49 624 739-1217 in the catalogue. Purchase orders must be in units. # = partly extent in stock. a
57448-57457 Diagonal cutting pliers DIN/ISO 5749 Slim head shape for use in hard-to-reach working places. For hard and soft wire. Fine wires are cut cleanly along the entire cutting edge length. Vanadium electric steel, oil-hardened. Cutting edges inductively hardened. Hardness of cutting edges approx. 62 HRC. 57448 57453 57448 Polished head, PVC-coated handles. 57453 Polished head, handles with thick-walled, bicolour, multi-component non-slip grips. 57455 Head chrome-plated, handles with thick-walled, bicolour, multi-component non-slip grips. 57455 57457 57457 Head chrome-plated, handles with thick, bicolour, multi-component non-slip grips, routine-tested in compliance with VDE DIN EN 69. VDE Length up to wire Ø up to wire Ø up to wire Ø 57448 57453 57455 57457 soft medium hard 125 3. 2.3 1.5 11 11 11 14 4. 2.5 1.8 12 12 12 12 16 4. 2.8 2. 13 13 13 13 18 4. 3. 2.5 14 14 14 14 57462 Diagonal cutting pliers DIN/ISO 5749 x Nickel-plated and chrome-plated, highly polished. Handles covered with cellulose acetate grips. With faced blades. Max. cutting capacity Piano wire. For hard and soft wire. Vanadium-extra steel. 57462 Length up to wire Ø up to wire Ø 57462 soft hard 125 2.5 1.6 13 16 3.5 2. 15 57472 Diagonal cutting pliers -ERGO- DIN 5749 x - Chrome-plated surface for additional corrosion protection - No sharp edges - 2-component handles - Optimum handle width - Less power, maximum cutting performance - Screw connection - Small shoulders - On/Off function of opening spring Chrome-vanadium steel. 57472 11-13 Progressive cutting edges - Optimal cutting radius for cutting - Soft and thin materials are cut at the tip (Cu and plastic) - Hard materials are cut close to the joint (FE + and piano wire) 57472 21-24 Heavy-duty cutting edges - Withstands more than 5, cuts through hard wire - The heavy-duty cutting edges ensure a powerful cut along the entire blade - The reinforced metal frame withstands the extreme conditions and particularly hard wires 57472 11-13 57472 21-24 Length up to wire Ø up to wire Ø up to wire Ø 57472 CU FE+ Piano 125 3.5 1.8 1.6 11 14 3.7 2. 1.8 12 16 3.8 2.5 2. 13 Length up to wire Ø up to wire Ø up to wire Ø 57472 CU FE+ Piano 14-2.2 2. 21 16-2.5 2.3 22 18-2.7 2.5 23 2-3.2 3. 24 # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline +49 624 739-1217 57.5
Diagonal cutting pliers 57475-57485 High-leverage diagonal cutting pliers DIN/ISO 5749 Steel C 6, oil-hardened and tempered, 57475 Polished head, dip-coated handles. 57478 2-component grips with handguard. 57485 Head highly polished, chrome-plated, insulation handles (1 V) in compliance with VDE IEC 69 sprayed directly on handles, with 2-component non-slip grips. 57485 57475 57478 5748 5748 ß 2-ergosoft grips with handguard. ß VDE Length up to wire Ø up to wire Ø up to wire Ø 57475 57478 5748 57485 medium hard piano 14 3. 2.2 1.8 11 16 3.5 2.5 2. 12 12 12 21 18 3.8 2.7 2.2 14 14 2 4.2 3. 2.5 13 13 13 23 575-57515 For hard and soft wire, piano wire as well. For heavy-duty projects. Chrome-vanadium heavy-duty steel, forged, oil-hardened, Hardness of cutting edges approx. 64 HRC. Note Length 25 suitable for Cu-wire up to 16 2 and Al-wire up to 35 2. 575 Polished head, PVC-coated handles. 5755 Polished head, handles with thick-walled, bicolour, multi-component non-slip grips. High-leverage diagonal cutting pliers DIN/ISO 5749 5757 With opening spring, which can be engaged when necessary. Polished head, handles with thick-walled, bicolour, multi-component non-slip grips. 5751 Head chrome-plated, handles with thick-walled, bicolour, multi-component non-slip grips. 57515 Head chrome-plated, handles with thick-walled, bicolour, multi-component non-slip grips. Routine-tested according to VDE DIN EN 69. 575 The opening spring is easily engaged with a press of the thumb. 5757 View of pliers underside with activated opening spring 5751 5755 57515 VDE Length up to wire Ø up to wire Ø up to wire Ø 575 5755 5757 5751 57515 soft hard piano 14 3.1 2. 1.5 11 11 11 16 3.4 2.5 2. 12 12 12 12 12 18 3.8 2.7 2.2 13 13 13 13 13 2 4.2 3. 2.5 14 14 14 14 25 4.6 3.5 3. 15 15 15 15 57.6 Fax order hotline +49 624 739-1217 in the catalogue. Purchase orders must be in units. # = partly extent in stock. a
57516 - Optimum transfer thanks to double joint construction - Extremely easy cutting with little expenditure of force cuts 5 % easier as the tried and tested KNIPEX high-leverage diagonal cutting pliers - NEW for diagonal cutting pliers The possibility of adjustment. The KNIPEX Twin Force cuts through even 4 thick wires with 2-3x repeat cuts without a great deal of effort. Standard high-leverage diagonal cutting pliers do not cut such diameters at all or only with very high effort - Little cutting impact gentle on hands, the tension on muscles and tendons is relieved - High degree of stability and zero-backlash due to precision milled forged-in axis - Pliers black atramentised, polished head KNIPEX TwinForce heavy-duty diagonal cutting pliers - Reliably cuts all types of wire, also flat material - For coarse and precision cutting - For use with a great deal of comfort, for repetitive cutting or extremely hard cutting jobs Chrome vanadium heavy-duty steel. 57516 13 Handles covered with plastic. 57516 23 Handles with multi-component handles. 57516 13 57516 23 Length up to wire Ø up to wire Ø up to wire Ø up to wire Ø 57516 soft medium hard piano 18 5.5 4.6 3.2 3. 13 18 5.5 4.6 3.2 3. 23 57518-5752 - Compact and lightweight, powerful and precise - Box joint highest stability at low a weight - Doubly supported joint axis for the hardest, heaviest duty. - High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio - 2 % less force required compared with high-leverage diagonal cutting pliers of the same length - Large opening width for thicker cables - Cuts precisely, even through fine copper wires - Compact, low-weight construction Cuts the very finest wires as well as multi-wire cable and hard piano wire. Universally usable, in the assembly, maintenance and production. Chrome vanadium heavy-duty steel, forged, oil-hardened. Compact diagonal cutting pliers X-Cut 57518 - Pliers black atramentised - Polished head - Handles with multicomponent handles 57519 - Pliers chrome-plated - Handles with multicomponent handles 5752 - Pliers chrome-plated - Insulated handles with multi-component handles - VDE-tested 57518 57519 5752 VDE Length up to wire Ø up to wire Ø up to wire Ø up to wire Ø 57518 57519 5752 soft medium hard piano 16 4.8 3.8 2.7 2.2 11 11 11 57517 - Ergonomic head, 25 angled - Advantageous use in all positions - Lever-optimised heavy-duty joint - Hardened precision cutting edges - Slim shape for large reach EvoLine high-leverage diagonal cutting pliers 57517 11 - Head fine-polished, forged - Handles with 2-component grips - With handguard 57517 21 - Head fine-polished, forged - Insulation handles (1 V) in compliance with VDE IEC 69 sprayed directly on handles - Handles with 2-component grips - With handguard VDE Length up to wire Ø up to wire Ø up to wire Ø 57517 57517 medium hard piano 18 3.8 2.7 2.3 # 11 # 21 57517 11 57517 21 # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline +49 624 739-1217 57.7
Diagonal cutting pliers Bolt cutters 57269 Lever diagonal cutting pliers Sturdy model with transmission and opening spring. Handles plastic-coated. For wires 12 N/ 2 up to 3.5 Ø, for wires 8 N/ 2 up to 4.5 Ø. Special tool steel, oil-hardened. Cutting 57269 Length 57269 235 11 5761-57611 Particularly high cutting performance with minimum effort due to highly effective joint design. The cutting forces are more than 2-x higher than the force used. 6% power savings compared to conventional high leverage diagonal cutting pliers. Chrome-vanadium heavy-duty steel, oil-hardened and tempered, cutting Hardness of cutting edges approx. 64 HRC. 5761 11 Handles covered with plastic. Head atramentised. Compact bolt cutters KNIPEX CoBolt 57611 11 2 angled head with single-ended bracket and lateral cutting capacity for flush cutting. With space for gripping. Handles covered with plastic. Head atramentised. 57611 21 2 angled head with single-ended bracket and lateral cutting capacity for flush cutting. With space for gripping. Opening spring integrated into the grip covers, with locking mechanism for comfortable operation and safe transport. Handles with bicolour multi-component grip covers. Head atramentised. 5761 11 5761 21 5761 31 5761 21 Handles with bicolour multi-component grip covers. Head atramentised. 5661 31 + 56611 21 57611 11 5761 31 Opening spring integrated into the grip covers, with locking mechanism for comfortable operation and safe transport. Handles with bicolour multi-component grip covers. Head atramentised. straight 2 angled 57611 21 straight 2 angled Length up to wire Ø up to wire Ø up to wire Ø up to wire Ø 5761 57611 soft medium hard piano 2 6. 5.2 4. 3.6 11 11 2 6. 5.2 4. 3.6 21 21 2 6. 5.2 4. 3.6 31 SAFETY FIRST! The current PSA catalogues 57.8 Fax order hotline +49 624 739-1217 in the catalogue. Purchase orders must be in units. # = partly extent in stock. a
57615 Small bolt cutters X 57615 11 Blade and pipe head drop-forged. Adjustment of blades not required. High-quality hardened and tempered. Ergonomic plastic handles. For cutting standard structural steel and steel wires up to 48 HRC. Blades made of chrome-vanadium special steel. 57615 21 With bolt and circlip rings. Length 19 HRC 4 HRC 48 HRC 57615 57615 up to Ø up to Ø up to Ø 39 7 5 4 11 21 57615 11 57615 21 57617 Bolt end eutting nippers X 57617 11 Angled blade head for close cutting. Blade and pipe head drop-forged. Adjustment of blades not required. High-quality hardened and tempered. Ergonomic plastic handles. For cutting standard structural steel and steel wires up to 48 HRC. Blades made of chrome-vanadium special steel. 57617 21 With bolt and circlip rings. Length 19 HRC 4 HRC 48 HRC 57617 57617 up to Ø up to Ø up to Ø 37 7 5 4 11 21 57617 11 57617 21 5762-57622 j 5762 Exchangeable, infinitely adjustable jaws, cutting edges in the middle, tubular handles. For cutting structural steel and steel wire up to 48 HRC. Jaws made of chrome-vanadium steel. Heavy-duty bolt cutters Heavy-duty bolt cutters X 57632 Exchangeable, infinitely adjustable jaws, screwed to the handles, tubular handles. For cutting standard structural steel and steel wires up to 48 HRC. Jaws made of hardened and tempered electric cast steel, 57622 s With straps and screws. Length 19 HRC 4 HRC 48 HRC 5762 57622 up to Ø up to Ø up to Ø 47 8 6 5 11 21 63 9 8 7 12 22 57632-57634 57634 With straps and screws, Length 19 HRC 4 HRC 48 HRC 57632 57634 up to Ø up to Ø up to Ø 46 8 6 5 11 # 11 61 9 8 7 12 12 76 11 9 8 13 # 13 91 13 11 9 14 # 14 17 16 11 1 15 # 15 5762 57622 57632 57634 # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline +49 624 739-1217 57.9
Bolt cutters Special bolt cutters for structural steel Non-sparking tools 57635-57636 Heavy-duty bolt cutters 57635 - Forged-in stopper with comfortable shockabsorber - Good access due to very flat construction of head and joint area - Ergonomically angled handles to minimise effort - Sturdy non-slip two-colour dual component handle sleeves - Precise adjustment (12 positions) by eccentric bolt - High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio - Bolted cutter head, replaceable - Head grey atramentised For hard materials up to 48 HRC. Blades Chrome vanadium heavy-duty steel, forged, oil-hardened. Cutting edges additionally inductively hardened, hardness of cutting edges approx. 62 HRC. Joint special tool steel, forged. Handles steel tube, powder-coated. 57636 Complete with screws. Forged-in stopper with damping insert dampens the average cutting impact comfortably 57635 57636 Length 19 HRC 4 HRC 48 HRC 57635 57636 up to Ø up to Ø up to Ø 46 8 6 5 11 11 61 9 8 7 12 # 12 76 11 9 8 13 # 13 91 13 1 9 14 # 14 5764-57641 X 5764 Approx. 4% lighter due to high-strength aluminium multi-component handles. Small opening angle of the handles, therefore low force is necessary. The extended top blade facilitates the handling of reinforcing steel mats lying on the ground. Blade and pipe head made of special steel. Special bolt cutter for structural steel 57641 Screws included. Length 19 HRC 4 HRC 48 HRC 5764 57641 up to Ø up to Ø up to Ø 8 11 9 8 21 # 21 5764 57641 5765-57651 X 5765 With multi-component handles and exchangeable knives. Substitute for cutting torch, cutting wheel and saw. High-alloyed steel, drop-forged, edges inductively hardened. Welded wire mesh and flat steel cutter 57651 Length max. Cutting force From wire dist. 5765 57651 HRC 2 84 4 x 4 3 x 3 11 11 5765 57651 57.1 Fax order hotline +49 624 739-1217 in the catalogue. Purchase orders must be in units. # = partly extent in stock. a