Jigsaw s Conversion Chart New RECA Art. Bosch Profix Bosch Profix No. Code Code Wood 0604 100 003 2608 630 030 T101B 380 101 00 P101B 0604 100 007 2608 630 032 T101D 380 101 0 P101D 0604 100 004 2608 630 033 T111C 380 102 00 P111C 0604 100 004 2608 630 040 T144D 380 103 0 P144D 0604 100 008 2608 630 08 T244D 380 104 00 P244D 0604 100 00 2608 630 014 T101BR 380 109 00 P101BR 0604 100 009 2608 630 031 T101AO 0604 100 011 2608 633 28 T234X Metal 0604 200 009 2608 631 013 T118A 380 10 00 P118A 0604 200 007 2608 631 032 T218A 380 10 0 P218A 0604 200 006 2608 631 017 T127D 380 107 0 P127D 0604 200 00 2608 631 014 T118B 380 106 00 P118B 2608 631 404 T318B 380 109 0 P318B 0604 200 008 2608 631 012 T118G 380 106 0 P118G 0604 200 012 2608 631 319 T318A 0604 200 011 2608 638 473 T123X Specialist 0604 400 003 2608 634 994 T34XF 0604 300 003 2608 630 66 T118EHM 0604 00 001 2608 633 164 T301CHM 0604 00 002 2608 633 176 T341HM 2608 631 010 T101A 03 01 - VY 10/16 Reproduction, even in part, prohibited. Printed in UK. Bosch Jigsaw s for Wood Basic for Wood - cost effective HCS CARBON Art. No Tooth with teeth Spacing 2608 630 037 T119B 1 2 Softwood 2-1mm, plywood, chip & fibre board 2608 630 033 T111C 74 3 Softwood 4-0mm, chipboard, fibre boards Speed for Wood - fast cut HCS CARBON STEEL ground edge Art. No with teeth 2608 630 040 T144D 74 4 Softwood (-0mm), chipboard, fibre boards 2608 630 08 T244D 74 4 Same as T144D, especially for curved cuts 2608 633 A34 T344D 126 4 Thick construction timber, softwood (-100mm), chipboard, fibre boards 03 01 03 01
Bosch Jigsaw s for Wood Clean for Wood - clean cut CARBON STEEL ground edge, fine & clean cuts in Hard & Softwood. with teeth 2608 630 031 T101AO 1 1.4 2608 630 030 T101B 74 2. 2608 630 014 T101BR 74 2. 2608 630 032 T101D 74 4 2608 637 90 T301CD 91 3 Softwood, plywood, laminated boards (1.-1mm) especially for curved cuts Softwood, chipboard, plywood, fibre boards (3-30mm), plastics/epoxy Softwood, chipboard, plywood, fibre boards (3-30mm), laminated boards, splinter free surface due to down cutting action Softwood, chipboard, plywood, fibre boards (10-4mm) Softwood, chipboard, plywood, fibre boards (10-6mm) Precision for Wood - precise cut HCS CARBON STEEL ground edge, accurate cuts with precise angles. with teeth 2608 633 A3 T144DP 74 4 Chipboard, plywood, fibre boards, softwood (-0mm) doors, kitchen surfaces 03 02 - VY 10/16 Reproduction, even in part, prohibited. Printed in UK. Progressor for Wood - fast & clean, HCS CARBON STEEL ground edge, thick and thin material. with teeth Speed for Hard Wood - fast cut BI METAL ground edge, fast cut in Hard Wood. 2608 633 28 T234X 91 2-3 Clean for Hard Wood - Clean cut BI METAL ground edge for fine cuts in Hard Wood. with teeth with teeth 2608 634 67 T144DF 74 4 2608 634 233 T101AOF 7 1.4 Softwood (2-6mm), chipboard, plywood, fibre boards, clean Hard and softwood (-0mm) All board types, including laminated boards Hardwood, laminated boards (1.-1mm), fibreglass, reinforced plastics, plywood, especially for curved, splinter free 03 02 03 02
RECA Jigsaw s for Wood RECA CV4 manufactured from chrome vanadium steel. Side set angular edged toothing. Ideal for types of wood <0mm. 0604 100 004 4 100 7 10 RECA Swing manufactured from chrome vanadium steel, tooth backed. Side set angular edged toothing. Ideal for types of wood <0mm, curved cut. 0604 100 008 4 100 7 10 RECA CV2 / CV2R manufactured from chrome vanadium steel. Angular edged toothing, CV2R reverse*. Ideal for types of wood and plastic <30mm. 03 03 - VY 01/18 Reproduction, even in part, prohibited. Printed in UK. 0604 100 003 2. 100 7 10 0604 100 00* 2. 100 7 10 RECA CV4 manufactured from chrome vanadium steel. Angular edged toothing. Ideal for types of wood and plastic <0mm. 0604 100 007 4 100 7 10 03 03 03 03
RECA Jigsaw s for Wood RECA Twist manufactured from chrome vanadium steel. Angular edged toothing, toothed tip. Suitable for softwood, plywood and coated boards <1mm, curved cut. 0604 100 009 1.3 76 0 10 RECA Uni Speed W manufactured from chrome vanadium steel. Angular edged toothing with progressive tooth pitch. Suitable for softwood up to 6mm, particle board, wood core plywood and fibre board. Bosch Jigsaw s for Metal Basic for Metal - Cost effective HSS HIGH SPEED STEEL - milled. 0604 100 011 2.3 117 90 10 03 04 - VY 01/18 Reproduction, even in part, prohibited. Printed in UK. with teeth 2608 631 013 T118A 92 1.1-1. Thin metal plate (1-3mm) 2608 631 032 T218A 1 1.2 Same as T118A, especially for curved cuts 2608 631 319 T318A 106 1.2 Thin metal plate (1-3mm), pipes and profiles, incl. aluminium (up to 6mm) 2608 631 014 T118B 1 2 Medium-thick sheet metal (2.-6mm) 2608 631 404 T318B 106 2 Medium-thick sheet metal (2.-6mm), pipes and profiles, aluminium (up to 6mm) Progressor for Metal - Fast, thick and thin materials HSS HIGH SPEED STEEL - milled. with teeth 2608 638 473 T123X 74 1.2-2.6 Special for Alu - Aluminium and non-ferrous metal HSS HIGH SPEED STEEL - milled. with teeth 2608 631 017 T127D 74 3 Thin to thick metal plate (1.-10mm), pipes and profiles, incl. aluminium (up to 30mm) Thin to thick metal plate (3-1mm), pipes and profiles (up to 30mm) 03 04 03 04
RECA Jigsaw s for Metal RECA HSS 0.7 manufactured from HSS Steel. Teeth milled and crimped. Suitable for thin sheet metal 0. - 1.mm. 0604 200 008 0.7 77 10 RECA HSS 1.2 manufactured from HSS Steel. Teeth milled and crimped. Suitable for thin sheet metal 1.2-2mm. 0604 200 009 1.2 77 10 RECA Bimetal 1 manufactured from Bimetal. Teeth milled and crimped. Suitable for steel and thin sheet metal 1.0-3mm. 03 0 - VY 01/18 Reproduction, even in part, prohibited. Printed in UK. 0604 200 012 1.0 132 10 10 RECA Bimetal 2 manufactured from Bimetal. Teeth milled and crimped. Suitable for steel and thin sheet metal, non-ferrous base metals and aluminium 2. - 6mm. 0604 200 00 2.0 77 10 03 0 03 0
RECA Jigsaw s for Metal RECA Twist manufactured from Bimetal. Teeth milled and crimped, curved cut. Suitable for thin to medium sheets 1. - 4mm. 0604 200 007 2.0 77 0 10 RECA Unispeed M manufactured from Bimetal. Teeth milled and side set with progressive pitch. Suitable for thin to thick sheets 1. - 10mm, pipes and profiles inc. aluminium (diameter <30mm). 0604 200 011 1.2 100 7 10 RECA Swing manufactured from HSS steel, tooth backed. Teeth milled and crimped, curved cut. Suitable for steel <30mm, non-ferrous based metal, aluminium and plastic. 03 06 - VY 01/18 Reproduction, even in part, prohibited. Printed in UK. 0604 200 006 3.0 100 7 10 03 06 03 06
RECA Specialist Wood / Plastic RECA Unispeed U manufactured from Bimetal. Toothing side set with progressive tooth pitch. Suitable for timber with nails up to 6mm, wood-based materials, plastics, sheet metal, pipes and profiles, inl. aluminium (3 to 10mm diameter). 0604 400 003 2.4 132 108 10 Stainless RECA Bimetal 1.4 manufactured from Bimetal. Teeth milled and crimped. Suitable for thin, stainless steel sheeting from 1.mm to 4mm. 0604 300 003 1.4 83 3 10 RECA HM 3.3 with ground toothed strip produced from cemented carbide and conically ground. Suitable for glass-fibre-reinforced plastics (GFRP) up to 6mm and Corian.0-20mm. 03 07 - VY 01/18 Reproduction, even in part, prohibited. Printed in UK. 0604 00 001 3.3 117 90 RECA HM 4.2 with conically ground, side-set and carbide-tipped toothing. Suitable for glass-fibre-reinforced plastics (GFRP) from.0 to 20mm, gypsum plasterboard and cement fibreboards from.0 to 0mm. 0604 00 002 4.2 100 7 03 07 03 07
RECA Sabre Saw s for Wood Colour coded on blade for different materials and pictograms on labelling for ease of identification. Manufactured from high quality material: Bi-Metal blades are longer lasting as they can withstand the heat generated when cutting metal. Conversion Chart New RECA Art. Old Reca Art. No. No. Bosch Wurth Metal 060 227 001 060 214 001 S922EF 061 91 014 060 227 003 060 22 001 060 210 001 S922BF 061 91 018 060 22 003 060 220 001 060 208 101 S920CF 061 91 029 060 220 003 060 208 102 S1120CF Wood Cut 060 116 001 060 104 01 131L 0608 030 2 060 119 001 060 119 00 060 106 004 1411DF 061 830 040 Wood/Metal 060 223 002 S922VF 061 91 026 060 223 006 S1222VF 061 930 26 Specialist 060 07 002 S1130 RIFF 061 722 830 060 301 001 SS18EHM 061 911 614 RECA Specialist Sabre Saw s Cast and Brick RECA Handle for Sabre Saw s A new multi handle, this can be used to lock sabre saw blades firmly in place. The locating seat holds all sabre saw blades with a standard ½ universal shank. A new added feature is that the handle will also hold ¼ standard bits, just turn the fastening ring (lock open) in the desired direction. Up to 6 x 2mm bits can be stored in the cap of the handle. The shape and grip of the handle mean that it is also well suited as a screwdriver handle. 060 010 002 Specialist blade for cast iron, red brick and ceramic, glass fibre reinforces plastic / epoxy 03 08 - VY 01/18 Reproduction, even in part, prohibited. Printed in UK. 060 07 002 230 2 Stainless Steel 18 Ideal for stainless sheet and profile <0mm, GRP and epoxy (inch) 060 301 001 18 1.4 11 03 08 03 08
Bosch Sabre Saw s for Wood Progressor for Wood - Effortless, fine cut HCS CARBON STEEL side set, ground. Overall Tooth Pitch Length Chipboard and MDF (6-60mm), construction wood (nail free) (6-10mm). Plunge cutting in wooden panelling 2608 64 404 S234X 200 Progressive Top for Wood - Ideal for cutting wood outdoors HCS CARBON STEEL side set for straight & curved cutting, ground. Overall Tooth Pitch Length Flexible for Wood & Metal Variable tooth spacing. Bi-Metal side set and milled. Ideal for nail embedded wood. 2608 60 673 S644D 10 6 Construction wood (nail free) (6-100mm). Plunge cutting in wooden panelling 2608 60 676 S131L 240 Rough wood (nail free) (1-190mm), damp wood (pruning) Bosch Sabre Saw s for Wood & Metal Overall Tooth Pitch Length 2608 66 016 S922HF 10 2. Pallets, wood with nails/metal inserts (-100mm), sheet metal, pipes + aluminium profiles (3-12mm) 2608 66 021 S1122HF 22 2. Pallets, wood with nails/metal inserts (-17mm), sheet metal, pipes + aluminium profiles (3-12mm) 2608 64 981 S1122VF 22 1.8-2.6 Sheet metal, pipes + aluminium profiles, (3-10mm) plastic, material/fibreglass (3-17mm), wood with nails (-17mm) 2608 66 022 S1222VF 300 1.8-2.6 Sheet metal, pipes + aluminium profiles, (3-10mm) plastic, material/fibreglass (3-20mm), wood with nails (-20mm) Progressor for Wood & Metal Optimised for general use. Bi-Metal side set and milled. 03 09 - VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Overall Length Tooth Pitch 2608 64 406 S346XF 200 Progressive Construction timber with nails (-10mm), metal pipes + profiles (3-18mm), PVC pipes/fibreglass (8-10mm) Bosch Sabre Saw s for Wood & Metal Heavy for Wood & Metal - Optimised for general use Bi-Metal side set and milled. Overall Tooth Length Pitch 2608 64 763 S1411DF 300 4.3 PVC pipes, fibreglass (-60mm), light building blocks (10-20mm), wood with nails/metal inserts (10-20mm) Demolition / timber building renovation, wood with 2608 66 27 S1110DF 22 4.3 nails/metal inserts (10-17mm), wooden boards + joists (10-17mm), plastic material/fibreglass (8-0mm) 03 09 03 09
RECA Sabre Saw s for Wood Greenwood Combo Fresh or wet wood, pruning green wood < 190mm (inch) 060 116 001 4 / 6.3 / 240 10 Window 6 Length 10mm, ideal for wood with nails, chipboard <100 / 20mm, plastic profile <100 / 20mm, GRP, epoxy <0 / 60mm (depending on blade length) (inch) 060 119 001 6 4.2 10 10 060 119 00 6 4.2 300 10 RECA Sabre Saw s for Wood / Metal Combo 10 / 14 For metal and wood with metal residue, steel from 2.mm, especially suitable for pallet repair <110/240mm (depending on blade length) 03 10 - VY 08/17 Reproduction, even in part, prohibited. Printed in UK. (inch) 060 223 002 10 / 14 2. / 1.8 10 10 060 223 006 10 / 14 2. / 1.8 280 10 03 10 03 10
Bosch Sabre Saw s for Metal Basic for Metal - for thin and thick materials HSS HIGH SPEED STEEL Wave set and milled. Overall Length Tooth Pitch 2608 61 781 S918B 10 1.8 Medium thick sheet metal (2-8mm), pipes + profiles (10-100mm) Flexible for Metal - for thin and thick materials bi-metal - side set and milled. Fast, straight cuts, flexible and break resistant. Overall Length Tooth Pitch 2608 66 013 S922AF 10 1 2608 66 018 S1122AF 22 1 2608 66 01 S922EF 10 1.4 2608 66 020 S1122EF 22 1.4 2608 66 014 S922BF 10 1.8 2608 66 019 S1122BF 22 1.8 Thin sheet metal (0.7-3mm), pipes + profiles (-100mm) Thin sheet metal (0.7-3mm), pipes + profiles (-17mm) Thin sheet metal (1.-4mm), pipes + profiles (-100mm) Thin sheet metal (1.-4mm), pipes + profiles (-17mm) Thick sheet metal (3-8mm), pipes + profiles (10-100mm) Thick sheet metal (3-8mm), pipes + profiles (10-17mm) Progressor for Metal - Optimised for use in thick and thin metals. Bi-Metal side set and milled progressive tooth spacing, for fast cut, long life. 03 11 - VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Overall Length Tooth Pitch 2608 64 402 S123XF 10 Progressive Heavy for Metal - Optimised for use in medium thick and thick metals. Bi-Metal - side set & milled. Overall Length Tooth Pitch 2608 66 264 S102BF 200 1.8 2608 66 26 S102VF 200 1.8-2.6 2608 64 820 S920CF 10 2.9 Thin + thick sheet metal (1-8mm), thin + thick profiles (-100mm) Medium thick/thick sheet metal (2-8mm), pipes + profiles (190-10mm) Medium thick/thick sheet metal (2-12mm), profiles + pipes (10-10mm) Steel plate (4-10mm), pipes + profiles (20-100mm) 03 11 03 11
RECA Sabre Saw s for Metal Sabre saw blade for thin metal sheeting, pipes and profiles made of metal. Metal 18 Thin sheet metal (1.-4mm), pipes / profiles (<100 /10mm depending on blade length). (inch) 060 227 001 18 1.4 10 10 060 227 003 18 1.4 200 10 Metal 14 Thick sheet metal (3-8mm), solid pipes/profiles (ø 10 to <100 / 17mm - depending on blade length). (inch) 060 22 001 14 1.8 10 10 060 22 003 14 1.8 200 10 03 12 - VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Robust Combo Heavy metal plate (4-12 mm), thick walled pipe and profile <100mm, ideal for pipe cutting and rescue/demolition. (inch) 060 220 001 8/10 3.2 / 2. 10 10 060 220 003 8/10 3.2 / 2. 22 10 03 12 03 12
Evolution Circular Saw Range EVO180-180MM (7 ) TCT steel cutting circular saw, mm (2-3/16 ) depth of cut through 6mm (1/4 ) steel plate, 1200 watt motor, complete with carry case & 12 months warranty. 0627 1180 EVO230 Xtreme with laser guidance - 230MM (9 ) TCT steel cutting circular saw, 84mm (3-1/4 ) depth of cut through 13mm (1/2 ) steel plate, 170 watt high torque motor, complete with carry case & 12 months warranty. 0627 2230 EVO3 Raptor Cut Off Saw - 2200 Watt, 230V motor, 1300rpm no load blade speed. 3mm dia. TCT blade / 2.4mm bore dia. Box cut capacity at 90 O - 120x120mm square, 94x180mm rectangle (6mm wall). Tube / pipe capacity at 90 O - 130mm (6mm wall). Box cut capacity at 4 O - 89x89mm square, 78x110mm rectangle (6mm wall). Tube / pipe capacity at 4 O - 10mm (6mm wall). 0627 3 Evolution circular saws DO NOT come with a saw blade. For our full range of blades please see below. 03 13 - VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Mild steel cutting circular saw blade. 180mm 0627 18036 230mm 0627 23048 3mm 0627 366 Stainless steel cutting circular saw blade. 180mm 0627 18048 3mm 0627 367 Wood cutting circular saw blade. 180mm 0627 18030 230mm 0627 23036 Aluminium cutting circular saw blade. 180mm 0627 1804 230mm 0627 23080 3mm 0627 380 180mm blades bore size 20mm, 230 and 3mm bore size 2.4mm. Standard Equipment Supplied With Unit: 1 x Carry Case, 1 x Side Handle, 1 x Fence Guide, 1 x Safety Goggles, 1 x mm Hex key for M6 screws, 1 x 6mm Hex key for M8 screws and Operating Instructions. Ear defenders and eye protection MUST be worn whilst operating this equipment. Do NOT touch the blade whilst it is in motion. Always follow the Personal Protection Equipment (PPE) recommendations whilst operating this tool. 03 13 03 13
Bosch Speedline Circular Saw s Quick straight separating cuts along and across the grain in solid wood and wood combination materials. One concave flat tungsten carbide tooth for efficient chip clearance. Two concave alternate tungsten carbide teeth for quick cutting. Special tooth support enables a controlled cut and high strength. Laser cut blade body for vibration free cutting. Application Range for portable saws - Rip cuts and cross cuts in softwood, hardwood, chipboard, formwork boards and plywood. Dia. Kerf Bore Number of mm mm Teeth 2608 640 822 160 2.6 20/16* 36 1 2608 640 799 190 2.4 20/16* 24 1 2608 640 801 190 2.6 30 24 1 2608 640 803 210 2.6 30 30 1 2608 640 804 230 2.6 30 18 1 2608 640 80 230 2.6 30 30 1 *With reduction ring Bosch Mitre & Radial Arm Saw s Very clean and true cut edges. Teeth can be re-sharpened several times. Negative chip angle for high cutting quality. Improved exit angle for increased safety. Diamond ground tungsten carbide teeth. Suitable for use with mitre and radial saws. 03 14 - VY 08/17 Reproduction, even in part, prohibited. Printed in UK. Application Range for table saws - Softwood - cross cut & fine cut, chipboard - laminated on one side or veneered, plywood and veneered plywood & fibre boards MDF. Dia. Kerf Bore Number of mm mm Teeth 2608 640 71 216 2.6 30 24 1 2608 640 72 216 2.6 30 48 1 2608 640 73 20 2.6 30 40 1 2608 640 74 20 2.6 30 60 1 2608 640 16 20 2.6 30 80 1 03 14 03 14
RECA Zakko Circular Saw With modern technology the tungsten carbide teeth on your circular saw blade should not detach at the first sign of a wire nail, but they do. The RECA Zakko changes all that and goes a long way further. Dia. Bore in Teeth Economical mm R.P.M. 3817 160 160 20-16 40 3800 3817 190 190 30-2.4 48 3200 3817 210 210 30-2.4 48 2900 3817 230 230 30-2.4 48 2600 3817 20 20 30-2.4 48 2400 3817 300 30 30-2.4 60 190 3817 30 3 30-2.4 90 1700 The RECA Zakko may look like an ordinary TCT circular saw blade but it doesn t perform like one. Sounds unbelievable but the RECA Zakko gives super clean cuts in metal, wood, plastics, pipes, copper, brass, aluminium, compounds and profiles. Suitable for use on power hand saws, table saws, mitre and chop saws. This product is not for use on angle grinders. No need to worry about the number of teeth required. Simply choose the correct diameter and bore as one blade will cut all the above materials. Please note it is strongly advised that all materials are correctly clamped to avoid the risk of cut material causing damage. All machines should be fitted with the correct safety guard. Rippa Carbide Tipped Saw 03 1 - VY 08/17 Reproduction, even in part, prohibited. Printed in UK. A viable alternative for a chain saw, that can also be used in many applications a chain saw cannot. The laminated steel centre with noise reducing slits: this greatly reduces both noise levels and vibration for the user. Carbide clusters inhabit the outer core of the blade. Bi directional: the blade can be run in either direction with no need to sharpen. Just turn the blade around again and again. A rugged blade that will rip through the tree roots, wooden board and planks, nails, rubber, plastic, abrasive blocks, soil, groundworks and fence panels. Ideal for the grounds maintenance division and forestry work. Size 300mm with 20mm bore. 3819 300 20 03 1 03 1