Workholding technology and product solutions for digital manufacturing Spanntechnik in der digitalen Fertigung www.hainbuch.com
Sensorized chuck for workpiece clamping Award winner in the»clamping Devices«category TOPlus IQ the intelligent chuck The sensor variant of the TOPlus chuck can monitor the clamping force that actually occurs on the workpiece and initiate changes in the clamping force. Moreover, measurement and monitoring of the clamping diameter are also possible. Integrated, intelligent measuring technology Permanent clamping force measurement and change analysis under rotation Clamping path measurement with comparison of the workpiece tolerance range Documentation of the measurement results [DIN EN 1550] Upstream and downstream measuring procedures Machine availability and process capability
Clamping force measurement for O.D. and I.D clamping TESTit clamping force measuring device Clamping force for O.D. and I.D. clamping can be measured manually with the digital measuring head or also with an automated process via the machine rack. To do this a Testit clamping force measurement device is inserted above the milling spindle and a normative-actual value comparison of the HSK draw-in force takes place. Then the TESTit is transferred into the chuck and it measures the clamping force. Electronic clamping force measurement for clamping devices and milling spindles Determination of the ideal clamping force for prevention of workpiece deformation or scrap parts Data transmission via Bluetooth to tablet or machine controller Documentation of the measurement results [DIN EN 1550] Scrap parts Workpiece quality through ideal clamping force selection
Unattended set-up and manufacturing Automatic clamping head and end-stop change-over Easy change-over of clamping devices in the HAINBUCH system not only shortens manual set-up times, it also establishes a basis for automation solutions. The robot changes the clamping head, as well as the suitable workpiece end-stop automatically. Clamping head chuck with integrated interface for automatic change-over of clamping head and workpiece end-stop in one change-over procedure Unattended set-up and manufacturing of different clamping diameters & clamping lengths Can also be used for machining centers and vertical lathes Personnel requirements [e. g. 3 rd shift] Productivity
Electronic measurement of feed force Feed force setting gauge for feedfingers For functionality, flexibility, and user friendly set-up of multi spindles, our RS feed system is the ideal solution. Set-up is even easier with the help of our feed force setting gauge. Electronic feed force measurement of feedfingers Determination of the ideal feed force Identical adjustment of multiple feedfingers Documentation of the measurement results [DIN EN 1550] Scrap parts Machine availability and workpiece quality
We actively participate in shaping Industry 4.0! Through the advancing digitalization, production is increasingly merging with the IT world. This development requires intelligent clamping systems. Here HAINBUCH is a pioneer in the area of sensor systems and data networking. Automatic loading, unattended production of different ranges of parts, and extending to process control mark the clear path for Industry 4.0. Are you part of the digital future? We look forward to your enquiry: Via phone +49 7144. 907-333 or via e-mail sales@hainbuch.de More information at: www.hainbuch.com HAINBUCH GMBH WORKHOLDING TECHNOLOGY Postfach 12 62 71667 Marbach / Erdmannhäuser Straße 57 71672 Marbach Germany Tel. +49 7144. 907-0 Fax +49 7144.18826 sales@hainbuch.de www.hainbuch.com 2000 / 12.16 part no. 80001/0324 Subject to technical changes.