FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with to 96 contacts are available for various purposes. iscrete-wire (WG #28, #30) I/O cables can be assembled by I. Metal covers completely protect sockets from EMI. ellows contacts ensure stable contact preventing pins from bending. The bellows contacts also have excellent stability with repeated insertion and extraction. Tails are spaced in a four-row staggered arrangement (2.54 mm 1.905 mm) (0.100 in. 0.075 in.) for easy P board design. Insulation is UL-approved (94V-0) and is washable. n FN-230 EMI cover and dust cap can be used together. SPEIFITIONS MTERILS Materials Operating temperature range 55 to +105 Insulator Polyester (UL94V-0) urrent rating 1 onductor opper alloy Voltage rating ontact resistance 240 V 35 mω max. ( 6 V, 0.1) Plating ontact Terminal Gold plating Palladium plating Insulation resistance 1000 MΩ min. ( 500 V) ielectric withstand voltage 750 V for 1 minute Insertion force (kg) 4.5 kg max. ( pins) Withdrawal force (kg) 0.6 kg min. ( pins) pplicable P board 1.6 mm (0.063 in.) thick pplicable wire (standard) I: WG #28 and #30 stranded wires with φ 0.5 to 0.88 mm (0.0 to 0.035 in.) insulation diameter. Soldering: WG #26 max. (reference) (The applicable wires depend on the number of contacts. See the descriptions of I sockets and metal covers.) 1
INSULTION ISPLEMENT ONNETION (I) SOKET IMENSIONS ody 1.27 (0.050) No. 3 No. 2 No. 1.3 (0.799) 9 (0.354) 5.5 (0.216) End terminal 6.9 (0.271) ssembly drawing over 2 1.7 (0.066) 5.4 (0.212) 6.9 (0.271) 1.7 (0.066) 3 (0.050) 8.4 (0.330) 8.4 (0.330) 5.4 3.6 (0.050) (0.212) 5.4 (0.212).3 (0.799) over 1 3 (0.050) 2.2 (0.086) Unit: mm (in.) SHPES OF MIN OY EPENING ON THE NUMER OF ONTTS contacts 28 contacts 36 contacts 50 contacts and 80 contacts PRT NUMERS N IMENSIONS Number of Insulation diameter of imensions: mm (in.) Part number contacts applicable wire φ0.65 to 0.8 mm FN-247J0-G/E FN-247J0-G/G FN-247J0-G/F 11.43 (0.450) 16.25 (0.639) 19.25 (0.757) 16.75 (0.659) 28 36 FN-247J028-G/E FN-247J036-G/E FN-247J028-G/F FN-247J036-G/F 16.51 (0.650) 21.59 (0.850) 21.33 (0.839) 26.41 (1.039) 24.33 (0.957) 29.41 (1.157) 21.83 (0.859) 26.91 (1.059) 50 80 96 φ0.65 to 0.8 mm φ0.65 to 0.8 mm FN-247J050-G/E FN-247J050-G/G FN-247J050-G/F FN-247J0-G/E FN-247J0-G/G FN-247J0-G/F FN-247J080-G/E FN-247J096-G/E 30.48 (1.0) 41.91 (1.650) 49.53 (1.950) 59.69 (2.350) 35.30 (1.339) 46.73 (1.839) 54.35 (2.139) 64.51 (2.539) 38.30 (1.507) 49.73 (1.957) 57.35 (2.257) 67.51 (2.657) 35.80 (1.409) 47.23 (1.859) 54.85 (2.159) 65.01 (2.559) These accessories are also used for the FN-230 series (general-purpose). Refer to the data sheet for the FN-230 series for details. 2
METL OVER (230 SERIES (GENERL-PURPOSE) N 240 SERIES (GENERL-PURPOSE)) IMENSIONS 12.0 10.0 (0.393) 32.5 (1.279) Unit: mm (in.) SHPES OF MIN OY EPENING ON THE NUMER OF ONTTS, 28, 36, 50 and contacts PRT NUMERS N IMENSIONS Number of imensions: mm (in.) Part number contacts 28 36 50 FN-2300-/E 6.5 4.5 (0.255 0.177) 28.95 (1.139) 21.15 (0.832) FN-2300-/E 8.5 8.2 (0.334 0.322) FN-230028-/E 6.5 6.0 (0.255 0.236) 34.03 (1.339) 26.23 (1.032) FN-230028-/E 7.2 8.5 (0.283 0.334) FN-230036-/E 9.5 8.0 (0.374 0.314) 39.11 (1.539) 31.31 (1.232) FN-230036-/E 10.0 9.7 (0.393 0.381) FN-230050-/E 8.5 7.0 (0.334 0.275) 48.00 (1.889) 40. (1.582) FN-230050-/E 10.0 9.7 (0.393 0.381) FN-2300-/E 9.0 8.0 (0.354 0.314) 59.43 (2.339) 51.63 (2.032) FN-2300-/E 10.0 9.0 (0.393 0.354) 96 FN-230096-/E 77.21 (3.039) 69.41 (2.732) 9.0 x 11.5 (0.381 0.452) 3
METL OVER WITH POLRIZTION [230 SERIES (GENERL PURPOSE) N 240 SERIES (GENERL PURPOSE)] This metal cover prevents a connector from being incorrectly inserted when two or more connectors with the same number of contacts are mounted on a P board. Use the metal cover together with the polarization guide. IMENSIONS E 1 2 3 4 5 SHPES OF MIN OY EPENING ON THE NUMER OF ONTTS contacts 32.5 (1.279) 7.5 (0.295) 12.0 10.0 (0.393) 28 and 36 contacts 1.4 (0.055) 0.4 (0.015) R ivet f 1.95 f 3 Part number : 630-5296-X801 Purchase a rivet if necessary. ISONTINUE 50,, 80 and 96 contacts Unit: mm (in.) PRT NUMERS N IMENSIONS Number of contacts 28 36 50 80 96 Part number FN-2300-/E FN-230028-/E FN-230036-/E FN-230036-/E FN-230050-/E FN-230050-/E FN-2300-/E FN-2300-/E FN-230080-/E FN-230096-/E FN-230096-/E 28.95 (1.139) 34.03 (1.339) 39.11 (1.539) 48.00 (1.899) 59.43 (2.339) 67.05 (2.639) 77.21 (3.039) 77.21 (3.039) imens ions : mm (in.) 21.15 (0.852) 26.23 (1.032) 31.31 (1.232) 40. (1.582) 51.63 (2.032) 59.25 (2.322) 59.25 (2.332) 51.00 (2.007) 6.5 x 4.5 (0.255 x 0.177) 6.5 x 6.0 (0.255 x 0.236) 9.5 x 8.0 (0.374x 0.314) 10.0 x 9.0 (0.393 x 0.354) 8.5 x 7.0 (0.334x 0.275) 14.7 x 10.4 (0.578 x 0.409) 9.0 x 8.0 (0.354 x 0.314) 14.7 x 10.4 (0.578 x 0.409) 9.0 x 10.0 (0.354 x 0.393) 8.0 x 10.0 (0.314 x 0.393) 9.0 x 11.5 (0.374 x 0.452) S pecifications 4
LE SSEMLY TOOLS The following tools are needed to assemble FN-230/230R/240/240R series connectors. able aligner (semiautomatic cable aligner or hand tool) I tool 1. able ligner ody/ontroller Semiautomatic cable aligner ed daptor Hand tool FN-237J FN-K560--xxx FN-237R FN-247J FN-M561-/ FN-P560-2/ FN-K560-R-xxx FN-K560-K-xxx FN-237T-T062/H FN-247R FN-P560-2/J FN-K560-J-xxx FN-247T-T061/H xxx indicates the number of contacts. 2. Insulation isplacement onnection (I) tool FN-237J FN-237R FN-237 FN-247J FN-247R FN-247 Hand press FN-237T-T109/H Head/Table FN-237T-T064/H FN-237T-T067/H FN-237T-T075/H FN-247T-T066/H FN-247T-T0/H FN-247T-T077/H able aligner Insulation displacement connection (I) tool 5
Semi-utomatic Tools able ligning Machine Main ody (FN-M551-1, FN-M551-2) over 2 over 1 Wires lamp lever pplicator Sinking comb lamp section pplicator Stand able key ed 1. Set the applicator on the stand. Set covers 1 and 2 in the applicator. 2. Push the wire into the sinking combs. 3. Set the applicator onto the installation table and begin cable alignment Head (FN-H550-1/) Stand (FN-550) Lock Lever Handle Guide Stopper pplicator (FN-550-1/-xxx) I Tool (FN-237T-T109/H, FN-237T-T067/H locator) 4. Take the covers off the applicator. 5. Put covers together and pre-assemble them to the connector body. 6. onduct final aaembly as shown. FN-240R SERIES I ROUN-LE ONNETORS SOKET: FN-247J***-G/E (***: 0, 028, 036, 050, 0,080, 096) Pos No. pplied Wire (wire ia.: mm) onnector Part number Hand Tool able ligner Semi-uto I Tool 96 #28 to #30 (0.5 to 0.65) FN-247J0-G/F FN-247J080-G/F FN-247J096-G/ E Semi-automatic-Medium Level ody: :FN-M551-1 Head ssembly: :FN-H550 pplicator: :FN-550-1/-***(***: 0, 028, 036, 050, 0, 080) Stand: :FN-550 FN-237T-T062/H F N-237T-T043/H (See below* ) FN-237T-T062/ H HN PRESS: FN-237T-T109/H HE & Locator: FN-247T-T066/H 6
Fujitsu omponents International Headquarter Offices Japan Fujitsu omponent Limited Gotanda-huo uilding 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141 8630, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com North and South merica Fujitsu omponents merica, Inc. 250 E. aribbean rive Sunnyvale, 94089 U.S.. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Europe Fujitsu omponents Europe.V. iamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ sia Pacific Fujitsu omponents sia Ltd. 102E Pasir Panjang Road #01-01 itilink Warehouse omplex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ 10 Fujitsu omponents merica, Inc. ll rights reserved. ll trademarks or registered trademarks are the property of their respective owners. Fujitsu omponents merica or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu omponents merica, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. January 5, 10. 7