GNSS-3P. GNSS Passive Antenna TECHNICAL PRODUCT DATA SHEET DESCRIPTION FEATURES OPTIONS

Similar documents
L1L2-2GAD DAGR GPS Active Antenna

MS14. Military Qualified 1x4 GPS Splitter. Description TECHNICAL PRODUCT DATA. Features. Designed & Manufactured to Military Specifications

RMS216. 2x16 Rackmount GNSS Splitter Order online today at TECHNICAL PRODUCT DATA SHEET

AT11V ATTENUATOR TECHNICAL PRODUCT DATA. Features. Excellent Flat Response. Pass DC or DC Block. Passes GPS, Galileo & GLONASS L1/L2

GPS-701-GGL and GPS-702-GGL

GPS-703-GGG and GPS-703-GGG-N

L1/L2GPNRRKIT. L1/L2 GNSS Portable Networked Re-Radiating Kit Technical Product Data. Features. Description. Uses Existing L1/L2 GNSS Roof Antenna

S18. GPS 1 x 8 Splitter TECHNICAL PRODUCT DATA. Features. Amplified to Preserve Link Margins. Passes GPS, Galileo & GLONASS L1/L2

o-ring grease can be used to hold the o-ring in the groove during installation.

GPS Splitter 1 in Rack Mount

S12 Splitter. Technical Product Data

A11M Amplifier. Technical Product Data

Pre-Filtered GPS LNA (Low Noise Amplifier)

S14 Splitter. Technical Product Data

A11 Amplifier. Technical Product Data

GPS-TMG-50N, 50 db Internal Amplifier

GNSS-750 ANTENNA GUIDE SITE SELECTION GUIDELINES. Additional Equipment Required. Accessories

o-ring grease can be used to hold the o-ring in the groove during installation.

ShortLink Wide Band Antenna Family Models: SLA150-SMA, SLA150-UFL. Wide Band Antenna Family SLA150 Datasheet

L1 Low Noise Amplifier

S18 Splitter. Technical Product Data

AN Energy Harvesting with the NTAG I²C and NTAG I²C plus. Application note COMPANY PUBLIC. Rev February Document information

ANTDOM XX CT WPM GPS ANTENNA Functional Specification

A Tallysman Accutenna TW2710 / TW2712 Magnet Mount Multi-Constellation Antenna

AN Ohm FM LNA for embedded Antenna in Portable applications with BGU7003W. Document information. Keywords Abstract

GPS Splitter 2 in 16 Rack Mount Splitter

ANN-MB series. Multi-band, high precision GNSS antennas. Data Sheet

L1L2 Low Noise Amplifier

AN11994 QN908x BLE Antenna Design Guide

AN Maximum RF Input Power BGU6101. Document information. Keywords Abstract

PNRRKIT. Portable Networked Re-Radiating Kit Technical Product Data. Features. Description. Utilizes Existing Roof Antenna

Metal Film Resistors, Non-Magnetic, Industrial, Precision

AT11DV Digital Variable Attenuator

Rotational Absolute Magnetic Kit Encoder Version 33 LP and HP Displacement Sensor

ANN-MB series. Multi-band, high precision GNSS antennas. Data Sheet

Metal Film Resistors, Industrial, Precision

ACA-4HSRPP-2458 Data Sheet

MaxLite LED Self-Driven LiteBars

BGU8007/BGU7005 Matching Options for Improved LTE Jammer Immunity

SKYA21029: 0.1 to 3.8 GHz SP4T Antenna Switch

AN BFU725F/N1 2.4 GHz LNA evaluation board. Document information. Keywords. LNA, 2.4GHz, BFU725F/N1 Abstract

Metal Film Resistors, Non-Magnetic, Industrial, Precision

RACELOGIC Antenna and Mount Options

SKY : 4.9 to 5.9 GHz SPDT Switch with Low-Noise Amplifier

Machining Design Guidelines

SKY LF: PHEMT GaAs IC High-Power 4-CTL DPDT Switch LF 6 GHz

SKYA21024: 0.01 to 6.0 GHz Single Control SPDT Switch

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

TED-Kit 2, Release Notes

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

S14WI Splitter for Wireless Infrastructure

PRODUCT CATALOG. RF Test. VIAVI Solutions. Antennas

Thick Film Resistor Networks, Military, MIL-PRF Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

UM User manual for the BGU7008 GPS LNA evaluation board. Document information. Keywords LNA, GPS, BGU7008. Abstract

SKY LF: 2.2 to 2.8 GHz Two-Way, 0 Degrees Power Divider

AN NHS3xxx Temperature sensor calibration. Document information

L1/L2GHNRRKIT. L1/L2 GNSS Hangar Networked Re-Radiating Kit Technical Product Data. Features. Description. Amplified L1/L2 GNSS Roof Antenna Gain 33dB

GPS-ITS. GPS Indoor Testing Solution Technical Product Data. Features. Description. Amplified Roof Antenna Gain 35dB

UM TEA1721 universal mains white goods flyback SMPS demo board. Document information

Rotational Position Sensor, Kit Type, Hall Effect Technology

Metal Film Resistors, Industrial, Precision

D4000 AND D5000 SERIES OMNIDIRECTIONAL

AN MIFARE Plus Card Coil Design. Application note COMPANY PUBLIC. Rev April Document information

AN High Ohmic FM LNA for embedded Antenna in Portable applications with BGU6102. Document information. Keywords

UM OM29263ADK Quick start guide antenna kit COMPANY PUBLIC. Document information

AN BGU6009/N2 GNSS LNA evaluation board. Document information. Keywords. BGU6009/N2, GNSS, LNA Abstract

Mini Circuits SMA Attenuators

Typical Performance Curves

FEATURES ± [0.64 ± 0.05] dia. (no. 22 AWG) tinned nickel leads solderable and weldable

Thick Film Resistor Networks, Dual-In-Line, Molded DIP

ANTENNA DESIGN GUIDE. Last updated March 8 th, The information in this document is subject to change without notice.

UM Slim proximity touch sensor demo board OM Document information

50 W Power Resistor, Thick Film Technology, TO-220

AN UCODE I2C PCB antenna reference designs. Application note COMPANY PUBLIC. Rev October Document information

SKY LF: 0.1 to 3.8 GHz SP8T Antenna Switch

Power Resistor, for Mounting onto a Heatsink Thick Film Technology

HNRRKIT. Hangar Networked Re-Radiating Kit Technical Product Data

UM Description of the TDA8029 I2C Demo Board. Document information

supplied o-ring grease can be used to hold the o-ring in the groove during installation.

Antenna Design Guide

High Precision Foil Resistor with TCR of ± 2.0 ppm/ C, Tolerance of ± % and Load Life Stability of ± %

SKY LF: 0.05 to 2.7 GHz SP4T Switch with Integrated Logic Decoder

SKY LF: 0.1 to 3.5 GHz SP3T Switch

Complimentary Reference Material

AN Replacing HMC625 by NXP BGA7204. Document information

AN SDARS active antenna 1st stage LNA with BFU730F, 2.33 GHz. Document information

AN PR533 USB stick - Evaluation board. Application note COMPANY PUBLIC. Rev May Document information

AN NTAG21xF, Field detection and sleep mode feature. Rev July Application note COMPANY PUBLIC. Document information

Power Resistor, for Mounting onto a Heatsink Thick Film Technology

SKY LF: 0.1 to 3.8 GHz SP6T Antenna Switch

Thin Film Bar MOS Capacitors

AN How to design an antenna with DPC. Rev November Application note COMPANY PUBLIC. Document information.

SKY LF: PHEMT GaAs IC SP3T Switch GHz

SKY LF: 0.01 to 6.0 GHz Single Control SP2T Switch

Vout SMNZ. Note RESISTANCE RATIO R1/R2 = 1 1 < R1/R < R1/R2 100

FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %

CURRENT MEARUREMENT SHUNT CS-10/500 USER MANUAL

AN Low Noise Fast Turn ON-OFF GHz WiFi LNA with BFU730F. Document information

Surface Mount Ceramic Chip Antennas for 2.4 GHz

SUBNANOSECOND PULSE GENERATOR PPG-2/1000 USER MANUAL

Transcription:

TECHNICAL PRODUCT DATA SHEET GNSS-3P GNSS Passive Antenna DESCRIPTION The GNSS-3P is a dual band passive GNSS antenna designed for long term reliability. It is small and lightweight, with exceptional protection against the elements. Designed to support the Warfighter, the portable, yet precise GNSS antenna is built for tough applications. The radome is made of a high-grade polymer, with a design to protect from UV, rain, lightning, chemical and jet fuels The GNSS-3P is available with a bottom mount connector and multiple colors (per FED-STD- 595B). FEATURES Military and Civilian Applications GNSS Bands: - GPS L1, L2, - GLONASS L1, L2 and L3 - GALILEO E1, E5b Waterproof Excellent gain Small Form Factor Integrated Resistor for Antenna/Coaxial Cable BIT Bottom Mount OPTIONS The GNSS-3P comes with many available options to meet specific needs. Please contact GPS Source via phone, fax, email, or visit the website for further information on product options and specifications. AS9100C:2009 and ISO 9001:2008 Compliant Company

1 GNSS-3P Specifications Table 1-1. Electrical Specifications Operating Temperature -54 C to 71 C Parameter Conditions Min Typ Max Units Frequency Range (Passband) GNSS Upper Band GNSS Lower Band Ant: Output = 50 1559 1575.42 1610 1189 1227.60 1254 Out Impedance 50 Element Gain GPS L1 > +3 GPS L2 >+0 GLONASS L1 >+3 GLONASS L2 > -3 Output = 50, 4 ft G.P. GLONASS L3 > -5 Galileo E1 > +3 Galileo E5 > -3 Galileo E5b > +5 Output SWR Output = 50 2:1 Polarization Axial Ratio at Peak Beam Width Altitude Lightning Protection Right Hand Circular < 2.8 db Max 110 +/-5 at -3dB from Peak (Free Space) 50,000ft DC to Ground on the Antenna Element MHz dbic Page 2 of 7

2 Performance Data 2.1 L1 Center Frequency Figure 2-1. Far Field Plots No Ground Plane 2.2 L2 Center Frequency Figure 2-2. Far Field Plots No Ground Plane Page 3 of 7

3 Environmental Requirements The GNSS-3P has been designed to meet the MIL-STD-810 following requirements. Table 3-1. Environment MIL-STD-810 Requirements MIL-STD-810 Requirements Mechanical Vibration 810G Mtd 514.6, Proc. I Functional Shock 810G Mtd 516.6, Proc. I Crash Hazard Shock 810G Mtd 516.6, Proc. V High Temperature 810G Mtd 501.5, Proc. I & II Low Temperature 810G Mtd 502.5, Proc. I & II Temperature Shock 810G Mtd 503.5, Proc. I-C Altitude 810G Mtd. 500.5, Proc. II & III Humidity 810G Mtd 507.5, Proc. II Salt Fog 810G Mtd 509.5 Fungus 810G Mtd 508.6 Sand and Dust: 810G Mtd 510.5, Proc. I & II Conducted Emissions 461F CE106 Radiated Emissions 461F RE102 Radiated Susceptibility 461F RS103 Page 4 of 7

4 Product Options Table 4-1. Type GNSS-3P Available Options Options Connector Mount Color (FED-STD-595B) N SMA TNC Bottom White Black (Standard) Olive Green Desert Sand Gray Male and Female Male and Female Female Gloss 5 Product Code Decoder G N S S - 3 G P - XX - XX Antenna GNSS-3GP = Bottom Mount GLONASS Passive Antenna Mount Blank = Bottom Mount PM = Pole Mount PL = Pedestal Connector Option NF = N... Female NM = N... Male SF = SMA... Female SM = SMA... Male TF = TNC... Female Note: To have product/part codes customized to meet exact needs, contact GPS Source at or visit the website at. Page 5 of 7

6 Mechanical Drawing 6.1 GNSS-3P GNSS Passive Antenna GPS Source Part No. GNSS-3P Description GNSS PASSIVE BOTTOM MOUNT TNC(F) ANTENNA Finish N/A Material SEE BOM Size C Mass 3rd Angle Projection.59 lbs Tolerances Linear.X = ±.1.XX = ±.01.XXX = ±.005 Angular ±1 RADII See Linear Dimensions are in inches unless otherwise specified. IAW ASME Y14.5M - 1994 Page 6 of 7

Page 7 of 7, 64 N. Mission Drive Pueblo West, CO 81007 Phone: (+1)(719) 561.9520 Fax: (+1)(719) 565.0890 X X AS9100C:2009 and ISO 9001:2008 Compliant Company 2014 GPS Source, Inc. All rights reserved. GPS Source, Inc., GPS Live Inside, GPS Source logo, and other GPS Source, Inc. products, brands, and trademarks mentioned in this document are property of GPS Source, Inc. and/or its affiliates in the United States and/or other countries. Other products, brands, and trademarks are property of their respective owners/companies. Any rights not expressly granted herein are reserved. DISCLAIMER: The materials in this document could include inaccuracies or typographical errors and are subject to change at any time. The materials are provided as is without warranty of any kind. To the maximum extent permitted by applicable law, GPS Source, Inc. and its suppliers hereby disclaim all warranties, either expressed or implied, and conditions with respect to the materials, their quality, performance, suitability, merchantability, fitness for a particular purpose, title, and non-infringement. LIMITATION OF LIABILITY: IN NO EVENT WILL GPS SOURCE, INC. AND ITS SUPPLIERS BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT OR TORT, ARISING OUT OF THE USE OR INABILITY TO USE THE MATERIALS AVAILABLE IN THIS DOCUMENT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR AND WITHOUT LIMITATION, GPS SOURCE, INC. SHALL HAVE NO LIABILITY FOR ANY LOSS OF USE, DATA, INCLUDING THE COSTS OF RECOVERING SUCH DATA, OR PROFITS.